Remote access vpn Wizard does not work?

Similar Questions

• Remote user VPN IPSec does not work

  Hello

  I'm trying to configure a remote IPsec VPN on a Cisco router user 1921 but it doesn't work for some reason I don't understand. Does anyone have an idea? I forgot something?

  Thank you in advance for your help!

  This is part of my configuration:

  AAA new-model

  !

  local AuthentVPN AAA authentication login

  local AuthorizVPN AAA authorization network

  !

  AAA - the id of the joint session

  !

  username password xxxxxx xxxxx 0 0 encrypted

  !

  crypto ISAKMP policy 1

  BA aes 256

  preshared authentication

  Group 5

  life 3600

  !

  ISAKMP crypto client configuration group vpnclient

  key XXXXXXXXXXXXXXXXXXXXXXXX

  DNS 192.168.0.254

  GVA area. INTRA

  pool IPPoolVPN

  ACL 100

  !

  !

  Crypto ipsec transform-set esp - aes esp-sha-hmac T1

  tunnel mode

  !

  crypto dynamic-map 10 DynMap

  game of transformation-T1

  !

  list of authentication of crypto client myMap AuthentVPN map

  card crypto myMap AuthorizVPN isakmp authorization list

  client configuration address map myMap crypto answer

  card crypto myMap 100-isakmp dynamic ipsec DynMap

  !

  interface Dialer1

  MTU 1492

  the negotiated IP address

  IP access-group RESTRICT_ENTRY_INTERNET in

  NAT outside IP

  IP virtual-reassembly in

  encapsulation ppp

  Dialer pool 1

  Dialer-Group 1

  PPP authentication pap callin

  PPP chap hostname xxxxxxxxx

  PPP chap password 0 xxxxxxxxx

  PPP pap sent-name of user password 0 xxxxxxxxxxxx xxxxxxxxxxxxxx

  crypto myMap map

  !

  IP pool local 192.168.10.0 IPPoolVPN 192.168.10.253

  !

  overload of IP nat inside source list 110 interface Dialer1

  !

  access-list 100 permit ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255

  access-list 110 deny ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255

  The conflict will be terminated and should be avoided. It might work if you disable split-mining and road, all via the VPN client...

  Ideally business networks should not use 192.168.0.0/24; 1 or 2 either since they are common in home routers... you can also have them change their home network easily

  Patrick

• Xmarks is functional? It didn't work for a week and the installation wizard does not work.

  The last time worked Xmarks was on 25 October. I am connected correctly and it tries to synchronize, but never finished. Even the Xmarks Setup Wizard does not work. It is a very useful addon in the past one I hope he'll return to work.

  I had this problem too. I'm running Firefox 25.0 and used Xmarks 4.2.1. Sync would not end. I downloaded Xmarks 4.2.3 from Xmarks web site (not the site of Mozilla Add-ons that apparently has 4.2.1) and now everything looks OK.

  Mark

• Client VPN suddenly does not work

  An external interface address changed on this PIX 501 yesterday - all of a sudden their client VPN does not work.  I checked that nothing in the config VPN configuration has changed.  I now see a *(HASH.) ("OAK NOTIFY ISAKMP INFO: NO_PROPOSAL_CHOSEN") in the journal on the VPN client.

  I crossed referenced on google - nothing in the statements of NAT, Access-list, or VPN configurations have changed.  Any ideas?

  Thank you
  Greg

  Your configuration is absolutely perfect.

  Please, try the following:

  no interface card VPN crypto outdoors

  card crypto VPN outside interface

  Remove and reapply the cryptomap on the external interface and see if that helps.

  Thank you

  Jeet Kumar

• Re: Satellite Pro L500-1VX-accessibility (FN key) does not work correctly

  I need your help to fix this problem on my Accessibility button does not work, when I press the FN key to turn my wireless on it does not work.
  When I go to program files > Toshiba > utilities > TACSPROP.exe a warning alert telling me it does not allow in this operating system.
  And for your information I have Windows 7 32 bit.

  If you are very popular to tell me what to do with this problem.

  Hello

  All the stuff for Win7 32 bit, you can find on the Toshiba support page in the download section > http://eu.computers.toshiba-europe.com > support & downloads.

  As Akuma written already install the most recent value package and check the functionality of the FN keys.
  Wireless network card is installed correctly?

• access BIOS, f10 does not work

  Model HP 110 - 23W, 8 GB of RAM, 2-Core Intel, "Refurbished" (cheap)

  Hoping to access BIOS to call works by timer.  To power, when 'HP' appears on the display, repeated F10 pressures have no effect another keep the dark screen before appearing the welcome admin screen.  HP provides another way to access the BIOS?

  -rlsj

  You are the very welcome.

  There is also another way to access the BIOS when the ESC key does not work on the PC W8.

  Please read the info at the link below.

  http://www.MakeUseOf.com/tag/how-to-access-the-BIOS-on-a-Windows-8-computer/

  I don't think that you will not be able to access the BIOS due to the limited improvement you can make to the computer.

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Remote server in DW does not work

  Local view in DW works but the remote server does not work.

  A dialog box indicates that "an FTP error occurred cannot connect to the host. Please let me know how to understand it.

  You set your server settings remote instructions of your web host?

  Do you have your perform a connection TEST?  See screenshot.

  

  As Jon said, sometimes you will need to enable/disable the FTP mode passive power.

  

  Nancy O.

• 'Connected' but 5.0.07.0440 VPN client does not work

  Hello

  IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.

  I recently tried, in vain, to connect my win7 64 bit laptop to my place of work with the Client VPN 5.0.07.0440. All technitians and support staff could not understand the problem that prevented successful login. Later, I could connect my laptop using the VPN Client 5.0.07.0410 - same home network via an old k9, winXP.

  What could be the problem with Win7 system? Work on my old laptop is a temporary solution, but not a good thing. I would be grateful for all the help I can get.

  I tried:

  -For each access to the Cisco VPN client on my ZoneAlarm firewall.

  -Turning off the firewall completely.

  -Connect to a different network (in an Internet Café).

  Personal support at work said this isn't the network (they checked my too just in case wifi router settings) from my old computer obviously connects without any problem on the first try.

  ANY ideas would be very appreciated!

  Here is the info yet:

  -Cisco VPN Client 5.0.07.0440

  -64-bit Windows 7 Home Premium SP 1.

  My security software (which may cause the problem as far as I know, even if I close ZoneAlarm):

  -Free firewall zone alarm

  -Microsoft Security Essentials.

  (maybe windows firewall too, if it automatically restarts when I turned off zone alarm)

  IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.

  Hello

  VPN client traffic is not transmitted from your computer to the VPN at all tunnel.

  It's if you have even tried the connection to the remote server before you took this screenshot?

  ID say it is a problem with your computer. Some software cause problems for the VPN Client or Client VPN software has problems with the network card real or something similar.

  One thing I might suggest is uninstall the firewall software and the VPN Client. After that, it is enough to install the VPN Client and try to login and check the statistics of same as in the pictures above.

  -Jouni

  EDIT: Whoa 300 posts already

  Edit2: If you have a full VPN tunnel, your computer must usually generate connections to the VPN tunnel even if you do not manually connect what either. What makes it even more strange that there are absolutely no traffic in the tunnel. Full VPN tunnel means that all traffic from your computer is transferred to the VPN tunnel when his assets.

• Norton 360 Connection Wizard does not work with Firefox 17

  I just upgraded to Firefox 17 and found that Norton 360 "Connection Wizard" (officially named Identity Safe) no longer works. He does not fill in the username and password fields. It worked great and did all the right things when I was using Firefox 16. There is probably a miracle solution, but in the meantime, I had to go back to version 16. Impatience the problem is resolved.

  http://community.Norton.com/T5/Norton-toolbar-Norton-identity/Firefox-17-support-for-Norton-toolbar/TD-p/853416

• Random Records Access database RND() does not work

  I have a sort of a time finding it. I will start by trying to explain what I want to do:
  Objective: I want 12 files chosen randomly from the list has my Access database.
  Whenever the page is refreshed, I want a new set of 12 cited records. I tried a lot of solutions in recent days does not! Here is my query:
  
  < CFQUERY NAME = "ctlst" DATASOURCE = 'absi"cachedwithin =" #CreateTimeSpan (0,0,0,0) #">
  SELECT TOP 12 prodmat.*
  FROM Catfit INNER JOIN ProdMat ON Catfit.prodid = ProdMat.prodid WHERE Catfit.slsid = 1
  ORDER BY Rnd (prodmat.prodid)
  < / cfquery >
  
  It irritates me 12 Archives randomly once and then I get the same list on one more when updating.

  Here's a quick and dirty example. Just set the desired maximum of lines and store them in the structure. The reason to use a structure is to eliminate duplicates.

  Then be looped through the structure directly, or convert to a list.

• VPN IPSec does not work

  I am trying to set up a VPN between a 2901 router and 831, but I'm not having any success.  When I run crypto isakmp sa, I get this:

  cisco831 #sh crypto isakmp his
  IPv4 Crypto ISAKMP Security Association
  status of DST CBC State conn-id slot
  IPv6 Crypto ISAKMP Security Association

  It doesn't seem to be a sign of life.  I can access internet ok on both routers, but the failure of attempts to ping between the routers LAN IP.  I guess it's a problem of nat or access-list, but I don't know what I'm missing at this time.  Here are my configs:

  CISCO 2901
  version 15.0
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime
  Log service timestamps uptime
  encryption password service
  !
  host name 2901
  !
  boot-start-marker
  boot-end-marker
  !
  no logging rate limit
  no console logging
  Select the secret XXXXXXXXXXXXXXX

  !
  No aaa new-model
  !
  No ipv6 cef
  no ip source route
  IP cef
  !
  IP domain name mondomaine.fr
  inspect CBAC tcp IP name
  inspect the name CBAC icmp IP
  inspect the name CBAC udp IP
  !
  Authenticated MultiLink bundle-name Panel

  secret user name me XXXXXXXXXXXXXXX 5!
  redundancy
  !
  crypto ISAKMP policy 3
  BA 3des
  preshared authentication
  Group 2
  ISAKMP crypto key address 173.x.x.x mypassword
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANSFORMSET
  !
  MYVPN 10 ipsec-isakmp crypto map
  the value of 173.x.x.13 peer
  game of transformation-TRANSFORMSET
  PFS group2 Set
  match address 199
  !
  interface GigabitEthernet0/0
  Description of the Internet
  IP address 173.x.x.x 255.255.255.248
  NAT outside IP
  IP inspect CBAC out
  IP virtual-reassembly
  automatic duplex
  automatic speed
  card crypto MYVPN
  !
  !
  interface GigabitEthernet0/1
  Description of LAN
  no ip address
  automatic duplex
  automatic speed
  !
  !
  interface GigabitEthernet0/1.1
  encapsulation dot1Q 2
  IP 192.168.1.1 255.255.255.0
  IP access-group 100 to
  penetration of the IP stream
  stream IP output
  IP nat inside
  IP virtual-reassembly
  !
  interface GigabitEthernet0/1.2
  encapsulation dot1Q 3
  IP 192.168.2.1 255.255.255.0
  IP access-group 101 in
  penetration of the IP stream
  IP nat inside
  IP virtual-reassembly
  !
  no ip forward-Protocol nd
  !
  IP http server
  IP http secure server
  IP flow-export GigabitEthernet0/1.1 source
  IP flow-export version 5
  flow IP 192.168.1.5 export destination 9996
  !
  overload of IP nat inside source list NAT interface GigabitEthernet0/0
  IP route 0.0.0.0 0.0.0.0 173.x.x.x
  !
  NAT extended IP access list
  ip permit 192.168.1.0 0.0.0.255 any
  !
  threshold of journal-update of 2147483647 IP access list
  recording of debug trap
  logging 192.168.1.5
  access-list 199 permit ip 192.168.1.0 0.0.0.255 172.20.0.0 0.0.0.255
  !
  control plan
  !
  Line con 0
  line to 0
  line vty 0 4
  exec-timeout 480 0
  password 7 XXXXXXXXXXXXXXX

  local connection
  entry ssh transport
  !
  Scheduler allocate 20000 1000
  end
  ************************************************************************
  CISCO 831
  Version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  hostname cisco831
  !
  boot-start-marker
  boot-end-marker
  !
  activate secret XXXXXXXXXXXXXXX!
  AAA new-model
  !
  !
  AAA authentication login me local
  !
  !
  AAA - the id of the joint session
  !
  !
  !
  !
  No dhcp use connected vrf ip
  DHCP excluded-address IP 172.20.0.1
  !
  IP dhcp pool mypool
  network 172.20.0.0 255.255.255.0
  WR domain name
  Server DNS 8.8.8.8
  router by default - 172.20.0.1
  !
  IP cef
  no ip domain search
  IP domain name mondomaine.fr
  !
  Authenticated MultiLink bundle-name Panel
  secret user name me 5 XXXXXXXXXXXXXXX

  !
  crypto ISAKMP policy 3
  BA 3des
  preshared authentication
  Group 2
  ISAKMP crypto key address 173.x.x.x mypassword
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANSFORMSET
  !
  MYVPN 10 ipsec-isakmp crypto map
  the value of 173.x.x.x peer
  game of transformation-TRANSFORMSET
  PFS group2 Set
  match address 199
  !
  Archives
  The config log
  hidekeys
  !
  interface Ethernet0
  LAN description
  IP 172.20.0.1 address 255.255.255.0
  IP access-group 100 to
  IP nat inside
  IP virtual-reassembly
  !
  interface Ethernet1
  Description of the internet
  IP address 173.x.x.13 255.255.255.248
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  card crypto MYVPN
  !
  interface Ethernet2
  no ip address
  Shutdown
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 173.x.x.14
  !
  no ip address of the http server
  no ip http secure server
  !
  overload of IP nat inside source list 100 interface Ethernet1

  Crypto-list extended IP access list
  ip licensing 172.20.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 100 permit ip 172.20.0.0 0.0.0.255 any
  access-list 199 permit ip 172.20.0.0 0.0.0.255 192.168.1.0 0.0.0.255
  !
  control plan
  !
  Line con 0
  password 7 XXXXXXXXXXXXXXX

  no activation of the modem
  line to 0
  line vty 0 4
  privilege level 15
  transport input telnet ssh
  !
  max-task-time 5000 Planner
  end

  A few things that need to be changed:

  CISCO 2901:

  (1) ACL 100 applies to GigabitEthernet0/1.1, however, I do not see 100 ACL configured on the configuration.

  (2) ACL 101 is applied to GigabitEthernet0/1.2, however, I do not see that ACL 101 exists in the configuration.

  (3) NAT ACL must exempt traffic between 2 local networks as follows:

  NAT extended IP access list
  1 refuse ip 192.168.1.0 0.0.0.255 172.20.0.0 0.0.0.255

  CISCO 831:

  (1) ACL 100 is currently applied to the configuration section 2: NAT and Ethernet0. I would create a new ACL for instruction of NAT that should be added to the deny ACL (NAT exemption) as follows:

  access-list 150 deny ip 172.20.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 150 permit ip 172.20.0.0 0.0.0.255 any

  overload of IP nat inside source list 150 interface Ethernet1

  no nat ip inside the source list 100 interface Ethernet1 overload

  Hope that helps.

• Photosmart 7525 Printer Wizard does not work with Windows 8 Pro

  Just installed the 7525, networking and it. Print, fax, etc very well, but when I click on the Printer Wizard, Notepad will open with two separate screens, HPSPProgress.hta, and HPSolutionsPortal.hta with many sequences of text I do not understand.

  I have a Toshiba Satellite P755-S5278 upgrade Windows 7 to Windows 8 Pro.  I know he kept Windows 7. However, 8 is here so is there a solution?

  Thank you

  Hello

  Use the hotfix or follow the steps listed below, if the program the error described resolution:

  http://support.HP.com/us-en/document/c03640384

  Shlomi

• fms_adminConsole.htm remote access connection time, does not connect

  FlashMediaServer4.5_x64.tar.gz (fms version 4.5.1)

  Linux followed instructions, success!

  Information System, newspapers, etc... Below.

  uname - a

  Poolhdz01.localdomain 3.0.0 - 16-generic #28 - Ubuntu Linux SMP x86_64 x86_64 x86_64 GNU/Linux

  lsb_release - a

  Distributor ID: Ubuntu

  Description: Ubuntu 11.10 x 64

  News Release: 11.10

  Codename: dreamlike

  PS - a

  PID TTY TIME CMD

  1?        init of 00:00:00

  2?        00:00:00 kthreadd

  3?        ksoftirqd/0 00:00:00

  6?        Migration/0 00:00:00

  7?        migration of 00:00:00 / 1

  9?        ksoftirqd/1 00:00:00

  10?        00:00:00 kworker/0:1

  11?        00:00:00 cpuset

  12?        00:00:00 khelper

  13?        00:00:00 netns

  15?        00:00:00 sync_supers

  16?        BDI-default of 00:00:00

  17?        00:00:00 kintegrityd

  18?        00:00:00 kblockd

  19?        00:00:00 ata_sff

  20?        00:00:00 khubd

  21?        00:00:00 md

  22?        00:00:00 khungtaskd

  23?        00:00:00 kswapd0

  24?        00:00:00 ksmd

  25?        00:00:00 khugepaged

  26?        00:00:00 fsnotify_mark

  27?        00:00:00 ecryptfs-kthrea

  28?        Crypto of 00:00:00

  36?        00:00:00 kthrotld

  39?        00:00:00 scsi_eh_0

  40?        00:00:00 scsi_eh_1

  41?        00:00:00 kworker / u: 2

  61?        00:00:00 kworker/0:2

  189?        00:00:00 scsi_eh_2

  196?        00:00:00 scsi_eh_3

  216?        00:00:00 scsi_eh_4

  217?        00:00:00 scsi_eh_5

  218?        00:00:00 scsi_eh_6

  219?        00:00:00 scsi_eh_7

  220?        00:00:00 scsi_eh_8

  221?        00:00:00 scsi_eh_9

  225?        00:00:00 kworker / u: 7

  243?        00:00:00 kjournald

  295?        00:00:00 upstart-udev-br

  304?        00:00:00 udevd

  339?        00:00:00 16/irq-mei

  393?        00:00:00 udevd

  394?        00:00:00 udevd

  452?        00:00:00 kpsmoused

  551?        upstart of 00:00:00 - socket-

  570?        00:00:00 kjournald

  578?        00:00:00 kjournald

  602?        00:00:00 sshd

  603?        00:00:00 rsyslogd(8)

  613?        00:00:00 dbus-daemon

  658 tty4 00:00:00 getty

  00:00:00 tty5 664 getty

  668 tty2 00:00:00 getty

  00:00:00 670 tty3 getty

  00:00:00 676 tty6 getty

  687?        00:00:00 irqbalance

  697?        00:00:01 mysqld

  705?        00:00:00 named

  709?        cron to 00:00:00

  712?        00:00:00 atd

  775 getty tty1 00:00:00

  839?        00:00:00 console-kit-dae

  906?        00:00:00 polkitd

  1052?        00:00:00 sshd

  1071 pts/1 00:00:00 bash

  1303?        01:00:00 fmsmaster

  1324?        httpd to 00:00:00

  1325?        httpd to 00:00:00

  1326?        httpd to 00:00:00

  1327?        httpd to 00:00:00

  1410?        04:00:00 fmsedge

  1489?        00:00:03 kworker/1:2

  1506?        00:00:01 fmsadmin

  1555?        httpd to 00:00:00

  1583?        09:00:00 fmscore

  1736?        00:00:00 hunting-8:0

  1766?        00:00:00 kworker/1:1

  1775 pts/1 00:00:00 ps

  netstat - listen

  Connections Internet active (only servers)

  Proto Recv-Q Send-Q local address foreign address State

  TCP 0 0 *: 1935 *: * LISTEN

  tcp        0      0 *:www                   *:*                     LISTEN

  TCP 0 0 *: 2224 *: * LISTEN

  TCP 0 0 19.103 - 44 - 209.st:domain *: * LISTEN

  TCP 0 0 poolhdz01.locald:domain *: * LISTEN

  TCP 0 0 poolhdz01.localdo:19350 *: * LISTEN

  TCP 0 0 *: 1111 *: * LISTEN

  TCP 0 0 poolhdz01.localdoma:953 *: * LISTEN

  TCP 0 0 poolhdz01.localdo:11110 *: * LISTEN

  TCP 0 0 *: 8134 *: * LISTEN

  TCP 0 0 poolhdz01.localdo:mysql *: * LISTEN

  tcp6 0 0 [:]: 2224 [:] LOOK :*

  tcp6 0 0 [:]: domain [:] LOOK :*

  tcp6 0 0 ip6 - localhost:953 [:] LOOK :*

  / etc/hosts

  127.0.0.1 localhost poolhdz01.localdomain

  127.0.1.1 netelubuntuinstall.localdomain netelubuntuinstall

  / etc/hostname

  poolhdz01.localdomain

  /opt/Adobe/FMS/logs/master.00.log

  #Version: 1.0

  #Start - date: 2012-03-01 19:29:49

  #Software: adobe Flash Media Server 4.5.1 r484 x 64

  #Date: 2012-03-01

  #Fields: date time x - pid registered x x - ctx x-comment

  2012-03-01 19:29:44 1303 (i) FMS detected IPv6 proto 2581173

  col stack!      -

  2012-03-01 19:29:44 1303 (i) 2581173 FMS config < NetworkingI

  Activate IPv6 = false > -.

  2012-03-01 19:29:44 1303 (i) FMS in IPv4 pro 2581173

  Slim stacking mode!       -

  2012-03-01 19:29:44 1303 (i) 2581173 host: poolhdz01.localdo

  Primary IPv4: 209.44.103.19 -.

  2012-03-01 19:29:44 1303 (i) 2571011 Server from... -

  2012-03-01 19:29:46 1303 (i) 2581413/opt/adobe/fms/Apache2.

  2/bin/httpd - f./conf/httpd.conf d' / opt/adobe/fms/Apache2.2 'k start returne.

  0 d: [Thu Mar 01 19:29:44 2012] [info] mod_jithttp - FMS installation path: / o «»

  "PT/adobe/fms / -.

  2012-03-01 19:29:46 1303 (i) 2581224 ar Edge started, (1410)

  guments:-edgeports ": 1935" - coreports "localhost:19350" - conf "/ opt/adobe/fms.

  / conf/Server.xml "-adaptor"_defaultRoot_"- the name"_defaultRoot__edge1"- edgenam".

  e 'DA1 '.      -

  2012-03-01 19:29:46 1303 (i) 2571111 server started (/ opt/ad)

  obe/fms/conf/Server.xml).       -

  2012-03-01 19:31:07 1303 (i) started 2581221 Core (1583), ar

  guments: - adaptor "_defaultRoot_", "_defaultVHost_" - vhost - app - inst-tag "_".

  1 "- console - conf" / opt/adobe/fms/conf/Server.xml "-name"_defaultRoot_:_defau "

  ltVHost_:_1 ". -

  /opt/Adobe/FMS/logs/edge.00.log

  #Version: 1.0

  #Start - date: 2012-03-01 19:29:51

  #Software: adobe Flash Media Server 4.5.1 r484 x 64

  #Date: 2012-03-01

  #Fields: date time x - pid registered x x - ctx x-comment

  2012-03-01 19:29:46 1410 (i) FMS detected IPv6 proto 2581173

  col stack!      -

  2012-03-01 19:29:46 1410 (i) 2581173 FMS config < NetworkingI

  Activate IPv6 = false > -.

  2012-03-01 19:29:46 1410 (i) FMS in IPv4 pro 2581173

  Slim stacking mode!       -

  2012-03-01 19:29:46 1410 (i) 2581173 host: poolhdz01.localdo

  Primary IPv4: 209.44.103.19 -.

  2012-03-01 19:29:46 1410 (i) 2631174 listener started (_def

  aultRoot__edge1): localhost:19350 / v4-

  2012-03-01 19:29:47 am 1410 (i) 2631174 listener started (_def

  aultRoot__edge1): 1935/v4-

  2012-03-01 19:29:48 1410 (i) 2631174 listener started (_def

  aultRoot__edge1): 127.0.0.1:19350 (rtmfp-core) / v4-

  2012-03-01 19:29:48 1410 (i) 2631174 listener started (_def

  aultRoot__edge1): 209.44.103.19:19350 (rtmfp-core) / v4-

  2012-03-01 19:29:48 1410 (i) 2631509 Public rtmfp-core addre

  small businesses for listener _defaultRoot__edge1 are: 127.0.0.1:19350; 209.44.103.19:19350.

  2012-03-01 19:29:48 1410 (i) 2631174 listener started (_def

  aultRoot__edge1): 127.0.0.1:1935 (rtmfp) / v4-

  2012-03-01 19:29:48 1410 (i) 2631174 listener started (_def

  aultRoot__edge1): 209.44.103.19:1935 (rtmfp) / v4-

  2012-03-01 19:31:07 1410 (i) 2581252 registration core (1583)

  /opt/Adobe/FMS/conf/FMS.ini

  SERVER. ADMIN_USERNAME = zach

  SERVER. ADMINSERVER_HOSTPORT =: 1111

  SERVER. PROCESS_UID = 1001

  SERVER. PROCESS_GID = 1001

  SERVER. LICENSEINFO =

  LIVE_DIR = / opt/adobe/fms/applications/live

  VOD_COMMON_DIR = / opt/adobe/fms/webroot/vod

  VOD_DIR = / opt/adobe/fms/applications/vod/media

  SERVER. FLVCACHE_MAXSIZE = 500

  SERVER. HTTPD_ENABLED = true

  ADAPTER. HOSTPORT =: 1935

  HTTPPROXY. HOST =: 8134

  ADAPTER. HTTPIDENT2 =

  VHOST. APPSDIR = / opt/adobe/fms/applications

  APP. JS_SCRIPTLIBPATH = / opt/adobe/fms/scriptlib

  RECORDER. LOGDIR =

  "USE." HTTPCOMMAND_ALLOW = true

  /opt/adoble/FMS/conf/users.XML

  < root >

  < UserList >

  < username = ' ${SERVER.» ADMIN_USERNAME} ">"

  No. displayed < password > < / password >

  allow <>< / allow >

  < deny > < / nie >

  < order > allow, deny < / order >

  < / user >

  < / UserList >

  < AdminServer >

  < HTTPCommands >

  < activated >$ {USERS. HTTPCOMMAND_ALLOW} < / activate >

  Ping < Allow > < / allow >

  < deny > all < / deny >

  < order > deny, allow < / order >

  < / HTTPCommands >

  < / AdminServer >

  < / root >

  
  

  FMS 4.5.1 is available here http://209.44.103.19/

  Maybe this information we'll see why http:80 connection will not accept my credentials.

  Thanks in advance.

  I solved my problem... The default admin port: 1111 wasn't redirected when using NAT and instead use nmap to route open ports and 2222 was available. Generally used for ssh terminal administration...

  Edit /opt/adobe/fms/conf/fms.ini and change:

  Of the SERVER. ADMINSERVER_HOSTPORT =: 1111

  To the SERVER. ADMINSERVER_HOSTPORT =: 2222 or port is bidirectional via tcp

  I suggest Adobe to set the SERVER. ADMINSERVER_HOSTPORT =: 2222 default to aleviate this common problem.

• Remote Desktop does not work since MacOS Sierra update

  Unable to connect with Remote Desktop or cord that worked before update

  Greetings geoffshop,

  Thank you for using communities of Apple Support. It seems you want to use under macOS Sierra remote desktop, but it does not work.
  I recommend you read this article, it has the settings you want to check to make sure that it is able to work.
  

  macOS Sierra: allow remote desktop to access your computer

  Take care.