Remote control no longer works

Similar Questions

• Remote control no longer works with HP TouchSmart 600 after 8.1 Upgrade Windows

  I've upgraded to 8.1 Windows only to find that my remote no longer works.  More than the volume controls integrated on the side of the TouchSmart computer work after the upgrade.

  Volume based keyboard controls have continued to function after the upgrade.

  All solutions?

  However I had no luck with the convenience store went into Device Manager and found it lacking the driver for the ARVA door.  I was able to download from

  http://www.ECS.com.tw/ECSWebSite/downloads/Downloads_Driver_Detail.aspx?menuid=61 & LanID = 0 & DetailID = 1508

  The remote works now, but still no luck with the volume control on the side of the computer.

  (I don't think that your instructions are quite right — rather than typing troubleshooting into the charms, I suppose you want to bring up the start menu and type of troubleshooting to implement the search function)

• Toshiba all-in - One DX1210 - remote control no longer works

  Hello

  I have a DX1210 (PQQ09A - 02900G), and I have a question where the remote works fine when I start the machine for approximately 15-20 minutes, then it just stops working.

  There is no error and cannot find anything if you set.
  Again, only way to make it work is restart or put it to sleep and then wake it up again to the top.

  Yet lasts only another 15 minutes or more.
  Someone at - he encountered this before? Running Win7 64 bit.

  See you soon,.

  Nathan

  Hello

  Have you checked if the reinstall/update driver would solve this problem?
  I think you should check this

  There is a driver called Winbond CIR driver
  http://www.MyToshiba.com.au/support/computers/all-in-one/dx1210/pqq09a-02900g/download?OS=25

  You have to uninstall it first and after new reboot, install this package again.

• Logic of remote control no longer works...

  Hi people,

  Hope I can get assistance here. Logic remotely on my iPad has suddenly stopped working sine upgrade to OSX 10.11.4 and gives me this error message.

  "The version of Logic Pro on mac selected must be updated"

  I'm already using the latest version of Logic Pro X and logical distance, so there is not updatable.

  I tried to delete the relevant pref but that did not help. Start logic on my iMac, I then open remote Logic on the iPad, I see my Mac. I try to connect, a message appears on the iMac requesting permission for remote logic to connect...

  

  I click 'Yes' at which point it fails and gives me the same:

  "The version of Logic Pro on mac selected must be updated"

  
  

  Looking at the powers of the controller there are 3 remotes of logic there! Try each one did not help.

  
  

  
  

  
  

  
  

  I'm already using the latest version of Logic Pro X and logical distance, so there is not updatable.

  and these versions are?

  Check that you actually run LPX 10.2.2... and not an earlier version because you can have a duplicate of LPX on your system somewhere and that whoever has updated and not the application that you are actually running.

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• Satellite X 200 - after upgrading Vista remote control does not work

  Hello

  I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

  Is there a driver for my remote?

  You may need to install the infrared driver.
  This driver is required to activate the infrared port on your laptop.

  You can find it here in the X 200 section
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

• Satellite A200 - 25 X - remote control does not work on Windows 7

  Hello

  I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

  Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

  I hope someone here can help me.

  Thank you

  Hey,.

  Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Satellite > Satellite a series > Satellite A200

  Check this box!

• Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

  I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

  I can not find a model of dv9249 specifically on the hp site. I found the dv9200
  series. you have a link to your specific model?
   
  in all cases, try to remove the Device Manager devices and if requested if you want
  to remove drivers, select Yes. then make a stop at cold and then turn it on.
  Finally, see
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Ene-CIR-receiver-conflict-in-Windows-7/TD-p/161289
   
  link of a person found an alternative driver that solves the problem) on the page
  (See above).
   
  It seems that several HP models affected related issues.
   
  If this does not resolve the problem, suggest that also posting in the forums of HP.
   
   
   
  On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
   
  > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
  Interface
  > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• 4th gen Siri remote control has stopped working

  I had my 4th Gen Apple TV since November 2015. Last week noted that the TV shows and movies are glitching but if I do a reboot on the apple TV everything works fine again and have to do it every day.

  Today the Apple TV remote was working fine all day then when a finished film went to for use and there was flashing reaction flights when I pressed one of the buttons. At first, thinking it was maybe needing a charge on the charger. A few hours later I returned to use the remote and it still doesn't work do not at all. I went into the Apple TV menu using a remote old money I thought that I would check how much fresh had the remote and I went for the remote controls and devices > BlueTooth remote control is more is listed and the dial connection was but would not connect to the remote control?

  I tried to reboot that fixed the glitching to see if maybe he would take the remote, but still nothing. Does anyone else have this problem?

  Try to re-twinning of Siri remote:http://help.apple.com/appletv/#/atvbc9953e63

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Satellite A500 - 14 H - remote control does not work

  I have a Satellite A500 - 14 H with the big remote control, but it doesn't work.
  Can someone help me?
  I installed the remote control manager, but no change. He still does not!

  I assume that you got your laptop with preinstalled operating system.
  Have you tested the feature with the parameters of this plant?

  Is remote controller completely dead or some functions do not work?

• Apple TV (3rd generation) remote control suddenly stopped working

  I used aluminum remote on my 3rd generation Apple TV for years without a single issue.  Then last night, after working fine most of the evening, it simply stopped working.  The first thing I did was to get the distance within two feet of the Apple TV, and then I was able to make it work.  To me, this indicates a battery is weakening, so I replaced it.  Same problem: Apple TV does not remotely, unless I get very, very close.  Just in case, I got a new battery, I tried a second.  Same question.

  I did a bit of digging in the community forum, and here's what I've tried:

  -restarted successfully the Apple TV via the software and then again just unplug the power cord and wait 10 seconds, but the problem persists.

  -successfully paired and re-paired remote control, but the problem persists.

  ATV shows a solid light when I push buttons, unless I come to this beach to two feet and then it flashes once as her answers ATV.

  I have looked on the IR through the camera of my iphone, but don't see any red flashes... and yet the ATV receives the signal from the remote control if it is close enough.

  Curiously, as part of my diagnosis, I noticed that the "UP" button had become insensitive, even from the beach which work the other buttons.

  I have not dropped the remote or mistreated it somehow, so can't see why it would break suddenly without reason.

  I'm puzzled.

  Your troubleshooting sound research.

  I would buy a new remote from Apple and try it.  They are $19.00.  If she is doing the same, the receiver IR of the ATC is responsible and return the new remote control within 14 days for a full refund.

  If it works keep the remote control.

• HP Envy tilt 23 MCE Remote Control does not work

  Hello

  I just bought a m202eg want to tilt 23 which included a USB DVB - T Tuner (AVerMedia A867) and a model of HP brand remote MCE Rothko (P/N 684258 - L31).

  The works of tuner as expected, but the remote has no effect at all, just blinks twice on each press and nothing else.

  I have to mention that the pilot of transmitter/receiver infrared eHome in installed correctly, Windows HID service is running and I also tried the remote on a NECK from Intel with IR integrated without success.

  In addition, as recommended on the back of the remote control, I tried to sync it with the receiver by keeping 'i' and ' # ' pressed for 5 seconds, 6 cm for the receiver, but instead of getting 2 flashes OK, the distance LED stays on for a few minutes and then blinks 4 times.

  I don't really have any other ideas, and I've already lost 2 days trying to get it to work...

  I thought about it, this remote is NOT IR media center remote RC6, even if she looks identical.

  It also works without the tunner AVerMedia DVB - T USB plugged my inclination, because he is using the USB 2.4 GHz key for mouse and keyboard - this is why he needs synchronization.

  So, this can be marked as resolved, it will be useful someone someday.