Remote control of my cell phone will not work after the upgrade to Windows Vista in Media Center window.

Similar Questions

• HP250 G3 Notebook: network will not work after the upgrade to Windows 10

  Hello

  Someone was able to get their network works after upgrade to Windows 10 for their portable HP250 G3?

  I think I have a driver problem. The message I get is along the lines of "impossible to link to network protocols. There is also an "unknown" device in Device Manager. Comparison with Windows 7 Device Manager, I can't understand what it could be.

  Of all drivers not not to work, the network is one of the most important that you can not use the Internet to debug the problem. I have uninstall Windows 10 and Windows 7 troubleshooting. (such a pain)

  So far, I tried to download all the drivers of network you're interested in that I can find on the web, as well as the Bluetooth drivers. I reload once 10 Windows installed and hope for the best. They got the right driver for the wireless network (which works only default with Windows 10 I might add) work, but I think it might be a controller driver that is still missing.

  I found a few sites that have suggested to the registry of hacking. I tried that too, but without success.

  If someone hacked into the problem, I would be happy to help.

  Hello

  Thanks for posting your concern, and I would like to try the drivers from the following link---

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6732463&swLangOid=8&swEnvOid=4192

  It didn't help not then write us back with the network card, you can get to the screen of the Device Manager under network adapters, as if from here so we can try searching the drivers from the manufacturer of netwrok card.

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• HP C7280 solutions Center will not work after the upgrade to Windows 7

  I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem.

  I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported operation was attempted" which appears twice, then I get an error that says "an invalid argument has been detected.

  A window pop up gives then a few measures to try to resolve the problem.

  I downloaded and installed the driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which did not work.

  I deleted the printer of the material then uninstalled the Software Solution Center

  Driver package driver re-installed PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 and

  dot4patch_reboot.exe installed,

  Stop the printer, it unplugged for a few minutes, restarted the computer, and

  the same errors.

  The driver is a year old, and I can't find a newer version.

  Exit the:		2009-10-20
  Version:		13.1.0

  The patch is the latest of a few months, but it did not help either. " Print Patch HP software when upgrading from Vista to Windows 7

  2009-12-06, version 1.0, 1.22 M

  This Windows 7 fix corrects some of the features of the printer after upgrading Vista to Windows 7. For networked printers, go to www.hp.com for more support information.

  Any help is appreciated.

  Finally, you have this problem fixed. With the support of HP no.

  I installed the software for a HP Photosmart Premium C410 series and it fixes some problems I had with the HP Solution Center, analyses the problems in the C7280 printing software.

  Go figure...

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

• Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

  My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

  I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.

• FN keys do not work after the upgrade to Windows 10

  Why the FN keyboard does not work after upgrade to Windows 10?

  FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...

  You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...

• Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

  Hello
  The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
  Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

  Satellite A500 - 134

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

• Laptop Compaq CQ58: LAN Ethernet does not work after the upgrade to windows 8.1

  After the upgrade of Windows 8 to 8.1, my Ethernet LAN is no longer in effect. Wireless LAN connectivity is OK. I run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I don't see a listed 8.1 for the LAN Ethernet driver.

  It seems that you encounter the same problem, I did when I ran the free preview of the W10. I had this error on the card reader.  I have no idea how to solve this problem.

  Is there is no ethernet controller needing drivers in Device Manager, then it is probably the realtek lan adapter that has the number 12 of the code, or it is part of the motherboard that controls the ethernet adapter.

  If you need Atheros bluetooth driver, then this is probably the one you need.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_127984_1

  Unfortunately, I won't be able to help you with question 12 code or ethernet.

  IMO, they are insoluble.

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• Satellite L670 Fn keys do not work after the upgrade to Windows 10

  Hello

  I ve upgraded my Win7 L670 to Win10. After upgrade do not work key Fn. is it possible to recover the functionality of these buttons in Windows 10.

  Wolfgang

  Hello

  Each cell function requires special tools and utilities.
  In the case of FN keys, Toshiba software controls this feature.

  But as far as I know that the Satellite L670 won't get any utility Windows 10 so probably this key will not work running Win 10.

  Here the details on the 10 Windows upgrade:
  https://Forum.Toshiba.EU/showthread.php?83832

• Envy 15 j139tx: fingerprint does not work after the upgrade to windows 10

  I have improved my ENVY 15 NoteBook Windows 8.1 for windows 10 j138tx. But after the upgrade of my fingerprint also does not work. I have updated software driver and it shows as follows.

  

  And the unit is also working (it is said ;-))

  

  But I can't add my fingerprint in sign in option. It does'nt allow me to set up.

  

  And when I open simple passage, it shows me after the error message.

  

  can someone please help me to reactivate it?

  Hello

  Open windows control panel, open programs and features, make entry for HP SimplePass right click and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download the version of HP SimplePass on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71729.exe

  Once the download is complete, open your downloads folder, right click on the installer SimplePass and select "Run as Administrator" to launch the installation.

  Once again, when this has completed, restart the laptop.

  When windows has reloaded, open windows control panel and on the top right, next to the display by: select "large icons".  The new layout, select the HP SimplePass entry and see if you can set your footprint digital log - on.

  Kind regards

  DP - K

• HP ENVY 15-k203tx: brightness keys does not work after the upgrade to windows 10

  Hello.

  I am using HP ENVY 15-k203tx and I have NVIDIA GeForce GTX 850 M
  I recently upgraded the operating system of windows 8.1 to windows 10
  Brightness shortcut keys do not work
  
  All the drivers are up to date.
  
  PnP monitor is also activated. What should I do?

  

  Hello

  You laptop has Intel/Nvidia switchable graphics and search RTA the screenshot, it does not resemble the driver Intel is installed.

  Try the following.

  Download driver Intel HD Graphics on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72810.exe

  Once complete, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72043.exe

  When it's over, don't reboot not the laptop that you are prompted, rather open your download folder, right-click on the Intel HD Graphics package and select "Run as Administrator" to launch the installation.

  Once this done, reboot the laptop and let Windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• the Lenovo g500 mouse does not work after the upgrade to windows 8.1

  I recently upgraded my g500 windows 8 for winows to 8.1. But ever since then, my mouse does not work and the keyboard works only after standby. I tried to restore the default settings, but that didn't help. What can I do to fix this?

  Hello

  If the system is still under warranty,

  I suggest that to call a repairman,

  If this isn't the case, you can try to check the keyboard and the Touchpad connection.

  You can consult this service manual

  http://download.Lenovo.com/consumer/mobiles_pub/lenovo_g400g500g405g505g410g510_hmm.PDF

  Hope this helps

  See you soon!

• Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

  Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

  Thanks for the reply.  HP has called since then and was finally able to install the driver.

• brightness key does not work after the upgrade to window

  I have a laptop hp 2000 - 2d28tu... yesterday, I upgraded its window 8 to 8.1 .after that the brightness is not increased or decreased by using the shortcut keys. . can someone tell me what is the reason behind it and how to solve it.

  Hello:

  You will probably need to install the graphics driver if the brightness is stuck up and the Fn keys do not work to reduce the level of brightness.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-126704-1&cc=us&DLC=en&LC=en&OS=4158&product=5393385&sw_lang=