Remote control of windows 7

Similar Questions

• Is it possible to remote control a Windows 7 laptop with a Surface (RT Windows)?

  I wish I could control my laptop running windows 7 with my (Windows RT) Surface since I do a lot of presentation in my work. I tried the Office to distance and Assistance remotely. The main software that I use is Power Point. Any suggestion?

  Hi Benjamin,

  There is an app in the store of Windows called RemotePresenterView that does what you describe. It allows you to remotely control a PowerPoint presentation running on your laptop using your Surface RT on WiFi. It has an annotation pen, laser pointer, see notes, slide sorter, etc.. Here is a link:

  http://apps.Microsoft.com/Windows/app/remotepresenter/5c86fe58-45fe-404F-9f22-bd1192b97aa3

  There is also a free version with limited functionality:

  http://apps.Microsoft.com/Windows/app/remotepresenterview-free/3fff04d4-a3b8-4567-BA08-2079bb9c708d

• Problem with remote control in Windows 7 Ultimate

  Hi guys,.

  I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit

  the remote control has stopped working & I tried to look for a solution but no luck.

  Please can you help me with this problem

  Thank you.

  Published by looks on 02/11/2009 04:51

  Hi Jajomafa,

  My problem was resolved a few days ago.

  There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.

  The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)

  I suggest that you run the automatic update.

  I hope this helps.

  Kind regards.

• Satellite P500-153 - need remote control for Windows Media Center

  I have a satellite P500-153, but without a remote mainenance (for housing expresscard).
  The suplier said I can buy it at the internetstore of toshiba, but I can't find a few anywhere!

  Maybe someone knows where I can get it or can give me the produktkey / the name of the remote maintenance.

  Hello

  As much as I know a few P500D Satellite P500 and X 500 series have been equipped with a remote control of size or a size slim (for express card slot) remote
  But as I said that some and not all units contains this remote.

  I think you should get in touch with a local ASP in your country.
  The authorized service provider could provide a compatible remote control.
  If this part is not in stock then the guys could order directly from Toshiba.

  Welcome them

• Pavilion DV7 - 1038ca Windows 7 - remote control does not

  Hi all

  Because I updated the OS to Windows 7, the remote control for windows media center does more work. I am now running a windows 7 Ultimate 64B on a Pavilion DV7 - 1038ca.

  I read a lot of posts and so far I have found this:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-78236-1&LC=en&DLC=en&cc=us&... but it doesn't seem to work for me as an error (9996).

  Is there something I can do?

  Thank you.

  CATA

  Simply because the tension seems ok doesn't mean it's all good, if it's heading 2006. Current stored in batteries, it's what makes their work.

  Kind regards
  ERICO

• Satellite P100-PSPA3A-05S00P - how to use the remote control & infrared

  Satellite P100-PSPA3A-05S00P.

  Do not know if I have deleted the drivers or need drivers for remote control and infrared.
  I'm not sure how to activate the infrared but I got this cable look like an infrared receiver, but you don't know where it's going.

  I used the remote when I bought the laptop from 1st but it was a few years ago...

  Hello

  I think that infrared doesn t need to be activated. It s must already be enabled.
  But the remote control can be used within Windows Media Center.
  I think this will work because my friend of mouse remote control with Windows Media Center as well and it worked well.

• Qosmio F20-149: remote control and Win XP pro

  First of all, Hello and sorry for my English.

  My question is if it's possible to get the work of infrared remote control in windows xp professional.

  The only thing I can do is volume up & down, but good... for sure that I have all things... like skip, play, stop and so on.

  I need driver? Or other things? Special settings?

  Thanks for your help!

  Marko Jakobi / Boton
  terrasight.NET

  Hi Marko

  I'm sure that it will be not possible. There is no particular setting that allows this option and also separate driver is not known to me.

  If you want to use skip, play, stop, and another option how you want to configure with which application it must works. Sorry, but I think that there is nothing to do.

• Where do you buy the media center remote control?

  Where do you buy the media center remote control?

  Hi John,.

  What operating system is installed on your computer?

  You can buy the remote control for Windows Media Center of Windows Store:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  Reference: use a remote control with Windows Media Center

  Hope the helps of information.

• Windows 8 on HP TouchSmart IQ826t (including REMOTE CONTROL) successfully installed

  Here's the background.  I have a TouchSmart IQ826t running Windows 7.  I have installed on it, (same partition), Windows 8 RTM using a DVD.  The installation went without a hitch and Windows 8 is installed.  I've had two disappointments: 1) the possibilities of contact not only that it was very difficult to slide on the screen side and the only way to scroll from left to right was to use the scrollbar at the bottom of the screen.  (2) turner of the TV does not work, but I am hopeful that it will be the 26 Oct when Microsoft releases the Media Pack.

  Thus, the question that I continued to work on was the touch feature.  I came across an update from HP that I missed for Windows 7 called "NextWindow 1950 Touch Screen Driver Update", which was to improve the answer touch near the edges of the screen and resolved a problem of sensibility in the upper right of the screen.  I downloaded it, (sp49787.exe) and tried to install it.  He would not have installed.  However, the part "NextWindow 1950" of the title was a clue.  I have been looking on the NextWindow site last week and I remember seeing a driver Windows 8 touch screen on their Web site: http://www.nextwindow.com/nextwindow_support/Windows_8_Touch_Screen_Driver.html

  I took a chance and downloaded.  Before you try to install it, I created a new system in case restore point where and then installed.  The installation has maybe 4-5 minutes, but he reported that he managed.  Without having to reboot, I checked the tactile ability and WOW, it works now as my 7.5 Windows phone with lots of scrolling left and right as well as perfect sliding on the side of the screen!  Just to be safe, I restarted and everything works great!  Thus, it seems that the driver on the link above is the solution at least for my model.

  Chuck

  I found how to get the HP Remote to work with my IQ826t! I was reading something and it reminded me that I had never gone through the list of Services on this computer. I found a service that has been extinguished called, 'Human Interface Device Access. I changed the properties of it from manual to automatic. Rebooted and WOW, the remote will now control the Volume, Mute and other functions, he was ignorant. NOTE: Before I tried this service I also found a service called "HP Software Framework. It was also well manually. I changed it to auto - delayed, but I don't think that this has nothing to do with the question. First try the service of Human Interface. I rebooted several times and the remote control of the TV still works. YES!

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Satellite A200 - 25 X - remote control does not work on Windows 7

  Hello

  I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

  Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

  I hope someone here can help me.

  Thank you

  Hey,.

  Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Satellite > Satellite a series > Satellite A200

  Check this box!

• I Don t see a button on the remote control to the top of the iTunes window

  I m trying to use the Remote app in my Apple Watch but I Don t see a button on the remote control to the top of the iTunes window to fit with my music library

  Hello

  The button on the remote control will appear in iTunes once you have tapped on the device to add within the Remote on Apple Watch app. Note that your computer and the watch must be connected to the same Wi - Fi network.

  In iTunes 12 and, later, the remote control button is located to the upper left, under the Volume slider. In iTunes 11 and earlier versions, the remote control is at the top right, under the search box.

  More information:

  Use Apple Watch as a remote for iTunes or Apple TV - Apple Support

• HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  PainedByTech wrote:
  

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

  For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?

• Remote control does not not in Windows 7 Starter

  Hi all

  We have an application that can be controlled via the remote control. It works fine in Windows XP PC. But when I try to access the same by opening Internet Explorer on a PC running Windows 7 Starter OS, I only get the "download 0.00% of 0 bytes'. I disabled Windows Firewall and there is no software antivirus also. What could be the reason for this? How could I solve this problem?

  Thanks in advance,

  Luxama

  The system that had the problem was a netbook comes with Windows 7 Starter. We recently discovered that there are some parental control utilities in the netbook that has prevented the LabVIEW remote command access. We were not aware of his presence, and he had not shown any indication that he had blocked communication remote panel. We have uninstalled this utility & remote control began to work as expected. Thanks again for your help.

• long-lasting problems after windows scammersr had remote control of PC

  I got Asian male phone call to the effect that I had serious problems with a virus on my computer. He claimed to be the appeal on behalf of Microsoft Windows. Is not not in computer, I followed a number of directions to him which eventually led to him have the remote control of my computer. The number of callers evil disguised alarm of "oh my God" etc the alleged problems he has discovered and when the purpose of the payment was raised, I ended the call. The call lasted about 40 minutes, and he had the remote for about 5 minutes. It seemed to me that it was associated with a site named PC technocrat. My fear is now that he can have some future remote access or caused other problems that I have not yet thought.

  Unfortunately, once you give someone the remote control of your PC, they can do whatever they want.  There is no way for you to know what they did or did not.  You must assume the worst - they left behind software that allows them to take control of your system and/or take all the information they want it without your knowledge, and that they took any information they wanted while being connected.  Then contact the banks and other institutions in finaicial you do business with and take steps to protect your accounts and your credit cards.  Next would be to save only essential or element files and documents such as photos, music, etc and then destroy your computer and restore to factory new.