Remote Desktop cannot connect to the remote computer to one of the following reasons:

Similar Questions

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• REMOTE DESKTOP cannot connect home via VPN to WORK computer

  Hi all

  Having problems connecting to the PC of Office WORK PC using remote desktop.  Currently, I connect to the WORK PC to WORK laptop with no problems.

  Page HOME of PC is a Dell Dimension 4600 Windows XP, version of Microsoft Office Home, ATT, anti-virus Norton 360 Wireless internet service.  Work VPN up and running.  Set up my computer remote tab in order to allow the communication and remote AUTHORIZED Norton 360 desktop, I can PING my computer work fine.

  I run my VPN and connect to function properly the network but when I run the Remote Desktop application, I get "this computer cannot connect to the remote computer."

  I know that my work IP address and logon information is exact and know that my work computer is configured to allow remote access because I do this work laptop.  I do not understand why my home PC has a problem if the VPN works and I can PING my computer work fine.

  Any advice would be appreciated. I looked all over the internet and cannot find additional ideas.

  Use teamviewer, it is much easier to understand. And you can give the PC connecting to a fixed password youre. If you do not have to change.  Just install on both, give the youre one connecting a password fixed, then log in with the other

  Is XP Home or Pro? If it does not support his home desk remotely

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information.

  Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".

  Karima,

  Applicable to Windows 7.

  The following steps require administrator credentials.

  • Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
  • Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.

  Good luck.

  James

• WINDOWS 7 (computer gateway NV53A AMD Phenom II x 3 N830) cannot connect to the internet

  Hello!

  I bought a Gateway NV53A AMD Phenom II x 3 N830 computer about 1.5 years. It was working great until a couple of days. I was browsing through Facebook and then all of a sudden I had this virus called "Security Scan" and it started to scan my computer and I couldn't stop. I removed this virus with a YouTube video, but since I learned that the virus of my computer is unable to connect to the internet. I have other computers connected to the internet. All of them work properly. In the lower right, I have internet bars and it says that I'm connected to '2wire400' but '2wire400' is not connected to the internet. In addition, on the symbol of the internet, I have a triangle that is yellow with a «!» I tried turning off the modem about 14 times. I did ipfigure cmd or w.e that nothing works.
  NEED HELP PLEASE!

  Hello!

  I bought a Gateway NV53A AMD Phenom II x 3 N830 computer about 1.5 years. It was working great until a couple of days. I was browsing through Facebook and then all of a sudden I had this virus called "Security Scan" and it started to scan my computer and I couldn't stop. I removed this virus with a YouTube video, but since I learned that the virus of my computer is unable to connect to the internet. I have other computers connected to the internet. All of them work properly. In the lower right, I have internet bars and it says that I'm connected to '2wire400' but '2wire400' is not connected to the internet. In addition, on the symbol of the internet, I have a triangle that is yellow with a «!» I tried turning off the modem about 14 times. I did ipfigure cmd or w.e that nothing works.

  NEED HELP PLEASE!

  Many viruses will assign a static IP address in the TCP/IP settings, try the following:

  1. Open network connections by clicking the start , and then clicking Control Panel. In the search box, type adapter and then, under center network and sharing, click view network connections.

  2. Right click on the connection that you want to change, and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click the network tab. Under this connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.

  Double check and make sure obtain DNS / IP are both checked on automatic.

• Media Player all of a sudden will not play the dvd. Error message: Windows Media Player cannot connect to the server

  Original title: Media Player all of a sudden will not play the dvd.

  Suddenly, I can't play DVDs on my laptop. The error message is: Windows Media Player cannot connect to the server. The name of the server are may not be not correct, ther server name maybe isn't available, or your proxy settings are may not be not correct. Any suggestions on troubleshooting of Microsofts page appear to be relevant.

  Hi mcraigQY

   

  1. when exactly you get the error message?

  2. you try to listen to music from any remote location or try to play a DVD?

  3 have you tried to play a different CD or DVD?
  4. what happens when you play the same DVD on another computer?

  5. for how long have you been faced with this problem?

  6. the DVD folder that you are trying to play supported by the windows media player is it?
  7. What is the type of DVD that you try to play?

  Let us know the answers to help you best.

• established - VPN connection, but cannot connect to the server?

  vpn connection AnyConnect is implemented - but cannot connect to the server? The server IP is 192.168.0.4

  Thank you

  ASA Version 8.2 (1)

  !

  hostname ciscoasa5505

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.0.3 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 208.0.0.162 255.255.255.248

  !

  interface Vlan5

  Shutdown

  prior to interface Vlan1

  nameif dmz

  security-level 50

  IP address dhcp setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS lookup field inside

  DNS server-group DefaultDNS

  192.168.0.4 server name

  Server name 208.0.0.11

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group service TS-780-tcp - udp

  port-object eq 780

  object-group service Graphon tcp - udp

  port-object eq 491

  Allworx-2088 udp service object-group

  port-object eq 2088

  object-group service allworx-15000 udp

  15000 15511 object-port Beach

  object-group service udp allworx-2088

  port-object eq 2088

  object-group service allworx-5060 udp

  port-object eq sip

  object-group service allworx-8081 tcp

  EQ port 8081 object

  object-group service web-allworx tcp

  EQ object of port 8080

  allworx udp service object-group

  16001 16010 object-port Beach

  object-group service allworx-udp

  object-port range 16384-16393

  object-group service remote tcp - udp

  port-object eq 779

  object-group service billing1 tcp - udp

  EQ object of port 8080

  object-group service billing-1521 tcp - udp

  port-object eq 1521

  object-group service billing-6233 tcp - udp

  6233 6234 object-port Beach

  object-group service billing2-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-777-tcp - udp

  port-object eq 777

  netgroup group of objects

  network-object host 192.168.0.15

  network-object host 192.168.0.4

  object-group service allworx1 tcp - udp

  8080 description

  EQ object of port 8080

  allworx_15000 udp service object-group

  15000 15511 object-port Beach

  allworx_16384 udp service object-group

  object-port range 16384-16393

  DM_INLINE_UDP_1 udp service object-group

  purpose of group allworx_16384

  object-port range 16384 16403

  object-group service allworx-5061 udp

  range of object-port 5061 5062

  object-group service ananit tcp - udp

  port-object eq 880

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-6233

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-1521

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing2-3389

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq https

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq www

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq ftp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing1

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 EQ field

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq www

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 remote object-group

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq smtp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 object-group olivia-777

  outside_access_in list extended access permit udp any host 208.0.0.162 - group Allworx-2088 idle object

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5060

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group web-allworx inactive

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group inactive allworx-8081

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-15000

  outside_access_in list extended access permit udp any host 208.0.0.162 DM_INLINE_UDP_1 idle object-group

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5061

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 inactive ananit object-group

  outside_access_in list extended access deny ip host 151.1.68.194 208.0.0.164

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  permit access ip 192.168.0.0 scope list outside_20_cryptomap 255.255.255.0 172.16.0.0 255.255.0.0

  Ping list extended access permit icmp any any echo response

  inside_access_in of access allowed any ip an extended list

  permit access ip 192.168.0.0 scope list outside_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0

  access-list 1 standard allow 192.168.0.0 255.255.255.0

  pager lines 24

  Enable logging

  logging buffered stored notifications

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 dmz

  IP local pool 192.168.100.30 - 192.168.100.60 mask 255.255.255.0 remote_pool

  192.168.0.20 mask - distance local pool 255.255.255.0 IP 192.168.0.50

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside) 1 192.168.0.0 255.255.255.0

  alias (inside) 192.168.0.4 99.63.129.65 255.255.255.255

  public static tcp (indoor, outdoor) interface 192.168.0.4 smtp smtp netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 192.168.0.4 www www netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 777 192.168.0.15 777 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 779 192.168.0.4 779 netmask 255.255.255.255

  public static (inside, outside) udp interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 880 192.168.0.16 880 netmask 255.255.255.255

  static (inside, outside) 208.0.0.164 tcp 3389 192.168.0.185 3389 netmask 255.255.255.255

  inside_access_in access to the interface inside group

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 208.0.0.161 1

  Route inside 192.168.50.0 255.255.255.0 192.168.0.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.0.0 255.255.255.0 inside

  http 192.168.0.3 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt noproxyarp inside

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  card crypto outside_map 1 match address outside_cryptomap

  card crypto outside_map 1 set pfs

  peer set card crypto outside_map 1 108.0.0.97

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  card crypto outside_map 20 match address outside_20_cryptomap

  card crypto outside_map 20 set pfs

  peer set card crypto outside_map 20 69.0.0.54

  outside_map crypto 20 card value transform-set ESP-3DES-SHA

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life no

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life no

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  identifying client DHCP-client interface dmz

  dhcpd outside auto_config

  !

  dhcpd address 192.168.0.20 - 192.168.0.50 inside

  dhcpd dns 192.168.0.4 208.0.0.11 interface inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  internal group anyconnect strategy

  attributes of the strategy group anyconnect

  VPN-tunnel-Protocol svc webvpn

  WebVPN

  list of URLS no

  SVC request enable

  encrypted olivia Zta1M8bCsJst9NAs password username

  username of graciela CdnZ0hm9o72q6Ddj encrypted password

  tunnel-group 69.0.0.54 type ipsec-l2l

  IPSec-attributes tunnel-group 69.0.0.54

  pre-shared-key *.

  tunnel-group 108.0.0.97 type ipsec-l2l

  IPSec-attributes tunnel-group 108.0.0.97

  pre-shared-key *.

  tunnel-group anyconnect type remote access

  tunnel-group anyconnect General attributes

  remote address pool

  strategy-group-by default anyconnect

  tunnel-group anyconnect webvpn-attributes

  Group-alias anyconnect enable

  !

  Global class-card class

  match default-inspection-traffic

  !

  !

  World-Policy policy-map

  Global category

  inspect the icmp

  !

  service-policy-international policy global

  : end

  ASDM location 208.0.0.164 255.255.255.255 inside

  ASDM location 192.168.0.15 255.255.255.255 inside

  ASDM location 192.168.50.0 255.255.255.0 inside

  ASDM location 192.168.1.0 255.255.255.0 inside

  don't allow no asdm history

  Right now your nat 0 (NAT exemption) follows the access list:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  Traffic back from your server to 192.168.0.4 in the pool of VPN (192.168.0.20 - 50) not correspond to this access list and thus be NATted. The TCP connection will not develop due to the failure of the Reverse Path Forwarding (RPF) - traffic is asymmetric NATted.

  Then try to add an entry to the list of access as:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.0 255.255.255.0

  It's a bit paradoxical but necessary that your VPN pool is cut out in your interior space network. You could also do like André offers below and use a separate network, but you would still have to add an access list entry to exempt outgoing NAT traffic.

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!

• I can't create a new site of catalyst for business with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with the server, try again later. How can I solve this problem?

  I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?

  Thank you

  Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver.  It may have been a conflict of name or something.

  Concerning

  Adrian

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!