Remote Desktop connection has encountered a problem and must be nearby

When printing a tag printing in internet explore from a server terminal server. I get the message "Remote Desktop connection has encountered a problem and needs to close". I get disconnected from the terminal server. I updated the file screwdriver as well as pilots of the printer. The printer is a HP3600.

Hi Marcus,

The question you have posted is related to the server terminal server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

http://social.technet.Microsoft.com/forums/en/category/WindowsServer

Tags: Windows

Similar Questions

  • Remote Desktop connection has encountered a problem and needs to close. We are sorry for the inconvenience

    I get an error trying to Office SP3 of XP to Windows 7 m system remotely.

    Error is displayed:
    AppName: mstsc.exe AppVer: 6.0.6001.18589 ModName: hpzui041.dll
    ModVer: 60.41.124.11 Offset: 000dfefd
    Here is the error in the event log:
    Failing application mstsc.exe, version 6.0.6001.18589, failed module hpzui041.dll, version 60.41.124.11, address 0x000dfefd failure.

    Hello

    It seems that the issue could be with the server. I suggest you to check with TechNet support for more information.

    http://social.technet.Microsoft.com/forums/en-us/newThread?category=WindowsServer&Forum=winserverTS

  • When I start the software Black Berry via the Office to receive the error message "the Black Berry Desktop software has encountered a problem and needs to close. We are sorry for the inconvenience. »

    Original Titus: cannot install software blackberry "BOLD"

    When I start the software Black Berry through the icon to the desktop, the windows error reporting or display below:

    Quote: Black Berry Desktop has encountered a problem and needs to close. We are sorry for the inconvenience.

    If you were in the middle of something, the information you were working on might be lost.

    Please tell this problem to Microsoft.

    We have created an error report that you can send improve us Black Berry Desktop Software. We will treat this report as confidential and anonyomous.

    End of quote

    What data means this error report contain?

    Why should I report to Microsoft?

    I received error below during the repair software blackberry

    Quote: The path:

    ' C:\DOCUME "1\HLZUTS" 2\LOCALS "1\TEMP\WZSE1. Berry TEMP\BLACK Office software.msi' is not found. Make sure you have access to this location and try again, or try to find the installation package "Black Berry Desktop Software.msi" as a folder that you can install the Black Berry Desktop Software 6.1 product

    End of quote

    No path

    Hi ZiaHL,

    Try the steps listed in the article mentioned below and check if it helps you to fix the problem:

    "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience. "during the synchronization process

    http://BTSC.webapps.BlackBerry.com/BTSC/dynamickc.do?externalId=KB10340&sliceId=&command=show&forward=nonthreadedKC&kcId=KB10340

    You can also view the article mentioned below for more information:

     

    BlackBerry Desktop Software issues fixed in this release

    http://docs.BlackBerry.com/en/Admin/deliverables/20936/BlackBerry_Desktop_Software_Fixed_904527_11.jsp

    Let us know if that helps.

  • Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

    Generic host win32 problem...

    HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

    Hello

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 2: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: Follow the steps in the article.

    How to troubleshoot a network home in Windows XP

    Windows wireless and wired network connection problems

    For reference:

    How to reset the Protocol Internet (TCP/IP)

  • Since the installation of money, more sleep Sun, when I open money, a box appears immediately shows "money has encountered a problem and must be closed.

    Original title: impossible to go beyond opening money PlusSunset

    Since the installation of money, lie the Sun when I open money, a box appears immediately watch "money has encountered a problem and must be closed" I had deleted the previous money programs before installing the new version and visa versa with the same results. At the top right of the new version installed, opening his shows "Download" continuously and does not allow me to go no more like it is stuck. I tried each fund repairs suggested two days and still not able to locate the problem. Any help out there? Thank you.

    Hey Mac,

    To come back and let us know that the information helped thanks.

    As mentioned in the previous post to solve any money related question, you can post your request in support of money Forums.

    Microsoft Money Forum

    If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

  • "Remote Desktop connection has stopped working" problem on Windows 7.

    When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
    "Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.

    Here is the log of the event viewer:

    Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
    Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
    Exception code: 0xc0000005
    Offset: 0x000000000000c138
    ID of the process failed: 0xf90
    Start time of application vulnerabilities: 0x01ca55cc39bf05f0
    The failing application path: C:\Windows\system32\mstsc.exe
    Path of the failing module: C:\Windows\system32\NLAapi.dll
    Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8

    Hi dekopolis,
     
    Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Error - Internet Explorer has encountered a problem and must close in Internet Explorer & jump - rises in Windows Explorer.

    Original title: Windows/Internet Explorer / Data Execution Prevention.

    I constantly receive pop-ups Windows and/or Internet Explorer has encountered a problem and needs to close. Windows Explorer in particular sometimes will do every few seconds.  I also sometimes have a debugger of Dr. Watson popup that blocks everything on my computer.

    I also get a pop-up Windows Data Execution Prevention indicating that Windows has closed this program to help protect my computer.

    My icons on the desktop this process will sometimes disappear.  I am able to restore in the Manager of tasks by clicking on the following:

    "C:\Documents and Settings\Administrator\Menu Démarrer\Programmes\Accessoires\Explorateur Explorer.lnk"

    I can't go online most of the time.  Sometimes I'm able to sneak in a "back door" by clicking on a link in an email, but time is limited (from five minutes to five hours) until I started offshore.

    Please notify.

    This root killer Webroot suggested?

    Are you going to provide the other requested information (requested) on your system and if not, why not?

    Did you run the scans listed in my previous post and if not, why not?  I am reluctant to work on weird problems with XP if MBAM and SAS have not been executed.

    So far, I never saw a Microsoft Support Engineer in these forums effectively resolve an error DEP in the 'right' way.  Sometimes, they have some things to try (how that works for you?), but you don't need methods to try, you will need to do things that solve your problem.

    I doubt that you have a memory problem or disk - which is not what causes the DEP errors.

    If you have made any exceptions DEP in XP to try and get your working papers, you must cancel all DEP exceptions to go forward.

    If I've ever seen Windows Explorer crashing and DEP errors, here's what I've done to understand what is happening:

    When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

    Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you
    install new software.

    Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

    If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

    First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

    Download ShellExView here to see what Explorer extensions you have loaded:

    http://www.NirSoft.NET/utils/shexview.html

    ShellExView does not install anything on your computer, simply of runs and displays.

    After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

    Click on the column header for "Microsoft" sort display (by clicking on the column of Microsoft) if all non-Microsoft extensions (all the 'Our') are on top and easy to see.

    Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

    You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
    You can Google something like:

    Explorer XP crashing (you must fill in the name of add your suspect on).

    See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

    I'm not a defender of trial and error, but I can't think of another way to do...

    Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

    If you recognize all the extensions that have been added or recently downloaded, start with these first.

    Disabling the extension does not uninstall the extension - it is just disabled.

    Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

    You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

    If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

    The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

    I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

    If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

    If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

    If complains in Internet Explorer, run Internet Explorer with no Add-ons and see if you still have the problem.

    If Internet Explorer then runs OK with no Add-ons, you can determine what add-on is the cause of the problem.

    Fortunately, Windows has a built in option to run Internet Explorer with no Add - ons (imagine that).

    To start Internet Explorer with no add-on, click on start, programs, System Tools, then choose:

    Internet Explorer (No Add-ons)

    If you can't find that, click Start, run and enter in the box (or copy/beyond the next line):

    "C:\Program may Explorer\iexplore.exe"-extoff

    Click OK to start IE with no Add - ons.

    IE will launch with a message reminding you that it runs with no Add - ons and ask you to click on the button Home (do) and then you can visit the web pages where you might think that you will get a DEP error.  Pages may be different, but you want to see if you still get the DEP error message or not.  You can then activate the Add-ons one at a time until find you the one that is causing problems.

  • My husband and I have our own password, but when I go to my side, I get "MSN has encounter a problem and must close" and it flashes shut down. What is my problem?

    My husband and I have passwords. but when I switch to my side, e-mail rises as soon as I get the message "MSN has ENCOUNTERED A PROBLEM AND NEEDS to CLOSE" and blink it closes.  My husband has never had this problem.

    It started about 2 years ago, I could never "my side". I had over 1000 emails in my box in and finally had enough

    time to delete 2 weeks ago, usually the message to come immediately. I have not been able to us my password (or side) I tried to speak with technical support, they couldn't help me.  I just ran across this website and thought I would try it.

    Hi Carolwood,

    That count are facing problems with?

    If you are faced with the question with MSN mail, you may need to contact MSN support for further assistance:

    How and when to contact Microsoft and support Customer Service

  • C:\windows\system32\xpsviewer error opening message has encountered a problem and must be closed.

    I am trying to open MS C:\windows\system32\xpsviewer, currently running on MS XP Professional.

    Get an error message whenever I try to open XPS.

    The message reads "XPSViewer.exe has encountered a problem and needs to close. We are sorry for the inconvenience ".

    I tried looking for the answer, but they seem to relate to MS Vista or 7?

    I wasn't sure what I should put it in so I chose programs?

    Best regards

    Anthony Tidey

    I would like to uninstall the XPS Viewer, then download and install a new copy.

    I don't know where you got your copy of Microsoft XPS Viewer, but it was packaged with XPS Writer in the Microsoft XML Paper Specification Essentials Pack

    I have not downloaded this, but I think that you don't have to install the XPS writer if you do not want to.

  • Error "Setup.exe has encounter a problem and must close" when you uninstall a program.

    Original title: Unistalling a program (Remove)

    I want to uninstall a program but when I click on remove the following pop up messege appears (Setup.exe has encounter a problem and nneeds to close.) We are sorry for

    the inconvenience.
    -----------------------------------------------------------------------------------
    If you were in the middle of something, the information you were working

    at the risk of being lost.
    Please tell this problem to Microsoft.
    We have created an erroe reprt who can send us.
    We wiil treat this report as confidential and anonymous.)

    Can you tell me what I need to do? Because I sent error report and the problem persists.

    Hope your replay at the beginning to my email address: * email address is removed from the privacy *.

    Sincerely

    Armando Cortes Monge

    Hey Armando,.

    We will need details of the program you are trying to uninstall as said by Stefan to help you with the problem.

    Come to the error, here are two ways to fix.

    Method 1:

    Reinstall the program from the installation source, and then Uninstall it. This helped to eliminate many applications successfully.

    Method 2:

    Manually remove the program from the registry.

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    After you back up the registry, follow these steps.

    (a) click Start and type regedit.

    (b) click on regedit.

    (c) in the registry editor, find the following registry key:

    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall

    Each key listed under Uninstall in the left pane of Registry Editor represents a program that is displayed in the list of installed programs, programs and features.

    (d) to determine which program that represents each key, click the key and discovers the following values in the details on the right pane:

    DisplayName: Data of the value of the DisplayName key is the name listed in Add / Remove programs.

    - and -

    UninstallString: The value of the UninstallString key data the program used to uninstall the program.

    (e) after you identify the registry key that represents the program, right click on the key in the left pane of the registry editor window, and then click Remove.

    (f) click Yes in response to the message "are you sure you want to delete this key and all of its subkeys?

    (g) close the registry editor.

    See if that helps.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.
    (c) in the registry editor, find the following registry key:

  • When I try to register (Photo Story 3 has encountered a problem and must close) what I do

    Original title: photo story 3 error

    When I try to register (Photo Story 3 to encode a problem and must close) what I do

    Hello

    1. were you able to use Photo Story 3 without any problems before?
    2 have you made changes on the computer before this problem?
    3 - what you want to say that you get this error message when you save slide show?

    Check if the problem persists the State of clean boot and send back the same.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    a. click Startand then click run.
    b. type msconfigand click OK.

    The System Configuration Utility dialog box appears.

    c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
    d. When you are prompted, click on restart to restart the computer.

    Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

  • I have installed TurboTax and when I try to open it says error TurboTax has encountered a problem and must be close__

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    TurboTax support: http://turbotax.intuit.com/support/

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Webcam does not start. Error: LifeCam.exe has encountered a problem and must be closed

    Webcam does not work after installation. I installed / re installed and currently have all the drivers, but it still doesn't work.

    Microsoft Lifecam Cinema True HD 720 p
    Windows XP SP3

    Webcam does not work after installation. I installed / re installed and currently have all the drivers, but it still doesn't work.

    Microsoft Lifecam Cinema True HD 720 p
    Windows XP SP3

    1. click on start and then click Control Panel.

    2. click appearance and themes.

    3. click on display.

    4. in the settings tab, click Advanced.

    5. on the Troubleshooting tab, move the hardware acceleration in the third position (from left to right), and then click OK.

    Note the following message is the description of this post:
    Disable all accelerations DirectDraw and Direct3D, as the cursor and advanced drawing accelerations. Use this setting to correct severe problems with DirectX accelerated applications.

    6. click OK to close the display properties dialog box.

  • ROBO 8 HTML has encounter a problem and must close

    I get ROBO to open, but then almost immediately I get this message.  What I have to do.  I can't work on my project until I have to get it fixed.  Thank you.

    After making a backup, rename the PDC and try again.

    After return from so please.

    See www.grainge.org for creating tips and RoboHelp

    @petergrainge

  • Windows has encountered a problem and needs to close

    Windows has encountered a problem and must close is happening frequently. ; When I try to close it won't let me

    Hello

    Thanks for posting your question in the Microsoft Community Forums.
    It seems that you receive error message "windows has encountered a problem and needs to close" on the computer.

    Provide us the information to help you further.

    1. don't you make changes on the computer before the show?
    2. when exactly you receive the error message?

    Try these steps and check if you are able to solve the problem.
    Method 1:
    Step 1: Check if the problem occurs in safe mode:

    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222
    Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check that helps:

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

    Method 2:

    You can scan System File Checker to fix corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
    http://support.Microsoft.com/kb/310747

    Reference:
    File system (CFS) Checker
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    If you are always faced with the question, please respond with more information, and we will be happy to help you

Maybe you are looking for

  • I think that I have installed an incorrect program.

    Hello! I'm a new Mac user. (YAY!) I have used Mac since I'm in high school, there are a dozen years, and a lot has changed. Trying to reinstall the programs and files, I think I did the step were you drag a program into the applications folder. Is th

  • removing a section of data in a file ini (config file)

    Hello I have a configuration file (ini file) that has a huge data (2000 lines) which contains Sections and keys. I would like to remove a Section and keys I use a FGV (functional global variable). I would like to delete a part of the data programmati

  • work at home net

    Trying to open the files shared between computers in a home network, I get the following message "unable to connect to smb://Access denied (error 5).

  • Can't add gmail account to Windows 8 Mail app

    Hey. I am trying to add my Google mail account for the application of mail UI style modern and everything I try, I get the "unable to connect. Ensure that the information you entered is correct. "message. What should I do? I use Windows 8 Pro 64-bit

  • 2015 inDesign open fullscreen mode

    2015.0 indesign Mac opens with the app bar at the top of the screen without window workspace which is how I like it, the latest version that I downloaded opens with the application bar at the top, but with a large space gray boring work attached belo