Remote Desktop Connection has stopped working since 7 for 2008

Similar Questions

• "Remote Desktop connection has stopped working" problem on Windows 7.

  When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
  "Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.

  Here is the log of the event viewer:

  Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
  Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
  Exception code: 0xc0000005
  Offset: 0x000000000000c138
  ID of the process failed: 0xf90
  Start time of application vulnerabilities: 0x01ca55cc39bf05f0
  The failing application path: C:\Windows\system32\mstsc.exe
  Path of the failing module: C:\Windows\system32\NLAapi.dll
  Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8

  Hi dekopolis,
   
  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Remote Desktop connects then stops after a few seconds

  I have two laptops to Windows 7.  We run OpenVPN which I will refer to the VPN server.  The other is the Client and with me on trips.  Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems.  I also have an Open VPN Client with another port configured on a server QNAS.  I can connect without any problems.

  I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS.  I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.

  I have a router TP-Link-ER-6120.  I can configure the three ports to run in 3 separate VLANS.  When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP).  However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password.  I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons.  Then it crashes.  If he does until I can see the desktop, it automatically attempts to reconnect.  If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.

  If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network.  If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above.  I also have a QNAS on my network with OpenVPN configured and operational.  If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.

  Thus, work Desktop connections to local computers.

  However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.

  -J' I ping the VPN server during connection attempts and never lose the connection.

  -J' used telnet to Server VPN 3389 port and it connects.

  -J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both.  And then disabled Windows Firewall as well and still no joy.

  Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?

  Is it maybe a configuration problem on the side of the router?  Installation side route is a very simple graphic interface.  I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server.  I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.

  Miss me probably something simple, but it launched my ass for weeks now.

  Any ideas?

  Hello Michael,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.

  Certainly, I understand your concern and will try my best to help you.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• The preliminary version of remote desktop connection has expired.

  The preliminary version of remote desktop connection has expired.  To download the full version of remote desktop connection, go to Windows Update or contact your system administrator (Please give me the solution for this problem)

  There are several ways you can solve the problem:

  You can copy the files from a Windows XP SP2 computer and then Windows Remote Desktop should work again.
  a. c:\windows\system32\mstscax.dll

  b. mstsc.exe

  Copy the files in safe mode if not just windows will recreate the files even if you replace them or delete them

  Or you can download an update from the Microsoft Download site and it will get your Remote Desktop works again.
  Update for Windows XP (KB969084) - The Remote Desktop Connection 7.0 client update allows you to use the new remote desktop Services features.
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=20609

  Please read the known issues in Windows XP from the article above.

  I hope this helps.

• SOLVED blackBerry Smartphones: BlackBerry Desktop Manager has stopped working

  Hello.

  Let me start by saying: I have a footstool to laptop Dell Vista 64-bit with 4 gig ram.  I have Desktop Manager v 4.7 installed and work much to sync my Outlook calendar and my Blackberry.

  From a week ago, the synchronization process gets all the way to the end and I get a message saying:

  "BlackBerry Desktop Manager has stopped working" and I have the choice of "check online for a solution and close the program" or "close program".  When I click on "view problem details I get this:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DesktopMgr.exe
  Application version: 4.7.0.37
  Application timestamp: 49c1b7ab
  Fault Module name: StackHash_6d57
  Fault Module Version: 6.0.6001.18000
  Timestamp of Module error: 4791 has 783
  Exception code: c0000374
  Exception offset: 000aada3
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 6 d 57
  More information 2: a8064b034a1a2f2f618d075073f8fe42
  3 more information: 2dc5
  Additional information 4: dbcf31406c7084dbad1f33e2de526f4e

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Any ideas?

  I found this on another site:

  (1.) start the Desktop Manager software

  2.) connect the blackberry using the USB connector
  3.) select "backup and restore".
  4.) select "Advanced".
  5.) look at the list of information to be displayed in the window "device memory" on your computer
  6.) select "calendar all" and delete it
  7.) go back to the main screen and synchronize them.
  8.), everything should work fine!

  Essentially, it's a data file of damaged calendar on the Blackberry device, apparently.

• iMovie has stopped working since iOS 10

  iMovie has stopped working since iOS 10

  Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it

  Hello iMovie does not work,

  After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
  I recommend you read these articles, there are a few things that we can try to get the application running again.

  Force an application to close on your iPhone, iPad or iPod touch - Apple Support
  Restart your iPhone, iPad or iPod touch - Apple Support

  If an application you have installed unexpectedly closes, unresponsive, or will not open - Apple Support

  Thank you for using communities of Apple Support. Good day.

• My Hotmail watcher has stopped working since last week. I uninstalled and reinstalled several times different, but it did not help

  My Hotmail watcher has stopped working since last week. I uninstalled and reinstalled several times different, but it did not help

  Sorry, I should have told you how to install it.

  • Click on the orange button Firefox > Modules > Extensions > click the settings next to the bar (screwdriver and key intercroisées) search, click install the module file them find the file that you downloaded and it open it. It should bring up a box that says install now. Do so if she asks you to restart Firefox, do.

• Transition of accessible technology among desktop computers has stopped working

  When I start my laptop I get "transition technologies accessible between desktop computers has stopped working" on my Vista...
  How can I fix it?

  Hello

  This error message is not known to me and it seems that there are not many details about this error.

  Have you checked if you can set the BONE to this early time before this error message appeared?

  Check it!

• Remote Desktop connection has encountered a problem and must be nearby

  When printing a tag printing in internet explore from a server terminal server. I get the message "Remote Desktop connection has encountered a problem and needs to close". I get disconnected from the terminal server. I updated the file screwdriver as well as pilots of the printer. The printer is a HP3600.

  Hi Marcus,

  The question you have posted is related to the server terminal server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Why my blackberry 7.1 desktop software has stopped working?

  my blackberry 7.1 desktop software has stopped working... .everytime when I open the software, it shows an error: he has stopped working... I also did the clean boot but nothing happned... Help, please!

  Hello

  Thanks for asking! If I understand correctly, your blackberry desktop software does not work. I suggest you follow the troubleshooting steps to check if this may help.

  You receive an error message on the computer?

  Try to uninstall and reinstall the Blackberry Desktop software and check if this may help. Make sure you download the latest version when reinstalling. For more information, you can consult the site of the manufacturer. Also contact Blackberry support if that's not enough.

  http://us.BlackBerry.com/support/apps-and-software/downloads.html
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Just reply with the results. I'd be happy to help you further.

• NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  Message that appears is: -.

  Windows has stopped this device because it has reported problems. (Code 43)

  BB

  Install the latest driver from nVIDIA:

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

  http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Smartphones from blackBerry Desktop Manager has stopped working

  "Desktop Manager has stopped working", that's what I get when trying to sync my curve.  He will get through the address book but stops each time on the calendar.  Any suggestions?

  Hmm. Maybe it's something in your Calendar database is corrupted. Your device has never been synchronized before? There is a way to clear the Calendar database. So if you have your device to sync with Outlook, after it is cleared from the BlackBerry, you can try to synchronize again.

  To clear the Calendar database, you can go to the Office Manager. Backup and restore | Advanced. On the right, select the Calendar database and click the clear button. Then try to synchronize again

• Error on blackBerry Smartphones: Blackberry Desktop Manager has stopped working

  I use Desktop Manager 4.7.0.32 with a Blackberry Bold (9000); I sync with Outlook 2007 and I am running Windows Vista 64-bit Ultimate w / SP1. Synchronization worked well for many years with previous blackberries, but the synchronization problem appeared after a year or two of use with my previous camera curve.  I replaced the curve with the bold thinking which damaged equipment could be the problem (one too many drops).

  However, the problem persists.  While it seems I can synchronize with success a way (from PC to BB), Director of office falls down to halfway through synchronization of calendar entries in a synchronization two-way, unless there has been no new entry calendar on the BB. The error is an error generated windows inidcating: Blackberry Desktop Manager has stopped working.

  I tried every solution I could find on the web, namely:

  • Uninstalling and reinstalling Desktop Manager, making sure that I run the installer as administrator.
  • My Blackberry wiping and reinstalling the operating system (I use 4.6.0.162)
  • Delete the Intellisync folder
  • Run scanpst on my Outlookpst file
  • Clear the entries of calendar on the Blackberry (temporary solution only)

  The latter is the only approach that has produced no results.  If I delete the entries on the Blackberry, the

  process synchronization adds them correctly, and the next time I run the synchronization, it works without a hitch.  As soon as I did all the entries on the BB unit however, Desktop Manager crashes again, and the only way I can make it work is to clear the entries on the Blackberry and start over.

  I'm several months and both handsets of BB has invested in this issue now.  I have a new fancy camera, but am recorded in writing of the appointments on paper when I am out of the office because I know they used to synchronize if I enter them at BB.  Type of defeated half the point of a blackberry...?

  Getting desperate here.  Help is appreciated.

  Brad

  Hello Brad!

  I had the same annoying problem that you guys have described here.
  After trough fishing a lot of post and forums I found a very surprising solution for another type of BB and a different version of the DM on XP and not Vista. Being desperate I tried and miraculously it worked!

  Start the DM BB and go - Syncronize - set - synchronisation - synchronization (button) - calendar - Advanced (button) - mapping fields (field mapping button) and I got rid of the synchronization between the flag "alarm" and the "free occupied" and the fields "invited".

  I did it and now everything works perfectly.

  I have a BB Bold, Vista Ultimate (32 bit), MSOffice 2007 (PRO) and a DMv4.7.

  I hope it will work for you also.

  Kind regards
  Steve

• Sync Smartphone blackBerry 8900 problem: "Blackberry Desktop Manager has stopped working".

  Curve 8900 on T-Mobile.  Fune Sync worked until a few days ago.  Recently used the Blackberry site to update all the software after that I received a message on my phone to do so (http://na.blackberry.com/eng/update/). Now, in the middle of synchronization (Bluetooth or USB), Windows tells me that "Blackberry Desktop Manager has stopped working".  It always stops working at the stage where Desktop Manager treats the device calendar.

  I tried all the stuff I can think: uninstalling and reinstalling, Outlook Update, disable Windows Defender, USB and Bluetooth, used the T-Mobile site and the EDGE of the site... nothing.  Help!

  Desktop Manager v5.0.0.11

  Handheld Software v4.6.1.231

  Windows Defender is DISABLED

  Synchronize with Outlook 2007

  Could mean that the calendar on the BlackBerry database is corrupted. Are the entries in Outlook until data on the BlackBerry? If so you can try out the BlackBerry database, and then synchronize again. To clear the database on the BlackBerry, go to the backup and restore | Advanced. On the right, you will see the BlackBerry databases. So you can choose the calendar, then click on the delete button. That will remove all entries from the BlackBerry calendar. Then try to sync.

• Both ethernet and Wi - Fi connection has stopped working. When wireless stopped working,

  Both ethernet and Wi - Fi connection has stopped working.  When has stopped working wireless, disabled the wireless card and connected the laptop to the network with the Ethernet port.  Same problem, cannot access network. Market Diagnostics I get the message that indicates that the test has been able to network ping, but received no response.  When I try to ping the router I have 100% failure.  Other computers on the network are still working and able to connect to the internet.  The currency displays Manager Ethernet card and WiFi card works properly.

  Don't know what I had, but it was pretty nasty.  Did a restore of the system for a few weeks back, and when it restarted everything worked.