Remote Desktop connection options are not available

Similar Questions

• Networking Windows XP to Windows 7 OS via Remote Desktop Connection - it does not connect...

  I manage problems while he was trying to use my connection remote connection desktop wireless with Windows XP for my desktop computer that is connected to my router by an ethernet cable, and my office has Windows 7 operating system. It seems that the remote desktop connection cannot locate this PC BUT I can not enter all office files when I go to my network places that throws me a loop for.

  It is important that I am able to get on my desk that I just had surgery and will be in his bed for 4 to 8 weeks without rising...

  Any help, you can be one would appreciate a lot! Life is what you make if you can walk, talk, see or stand! "Disabled doesn't mean impossible" My 96 Ford Windstar http://Windstarsc.com Supercharged http://brucewalz.com

  And I have another question, I apologize. When I tried to update my profile, I received a message; "Sorry, we're unable to process your request. Please try again later. "I tried the update a few weeks ago, but I got the same message - could - it be me, Firefox or is there a problem? Thanks again! Life is what you make if you can walk, talk, see or stand! "Disabled doesn't mean impossible" My 96 Ford Windstar http://Windstarsc.com Supercharged http://brucewalz.com

• BlackBerry Smartphones media options are not available

  I've upgraded to version 6 of the desktop software and now I can't see all of the photos I have in my blackberry. When I click on the images, I get the following:

  

  I don't get the legs that are supposed to show by saying "device images" or "computer". I didn't have this problem with version 5 of the software. I have 'mass storage' put on the market. The photos are not in the internal memory a media card. I tried to access the images through "my computer", but the reader that appears for blackberry says 'insert disk '. I read a Ko that describes this symptom but it only apply if the device showed 0001 or 8001 in Device Manager. Show you mine 8004. Can anyone help?

  Thanks to Thomas that responded to the questionnaire. Fortunately, I managed to solve this problem last night. Before your post, I also tried dm6 uninstall & reinstall except to take out the battery & disable the firewall. That did not work. I tried to install dm5 since that worked before and that no longer works.  What worked was a fix by blackberry. Although it requires you to ensure that your blackberry says 0001 or 8001 in windows 'Device Manager' mine says 8004. I tried anyway since I didn't have much to lose at this stage and it worked.

  I would switch to dm6, once again, but I don't want to take the risk now that I have it working. Maybe in the future. The link at the bottom of my post contains the fix for this problem. As I said your blackberry does not necessarily mean 0001 or 8001. Give it a try the next time you have this problem. Although he said that you need version 4 and 5 DM I guess that it will work with dm6.

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB19717

• CS6 InDesign overlay Panel options are not available

  I am an experienced Adobe DPS designer and use "Classic" DPS because it was in beta.

  Just upgraded my Mac Pro to El Capitan (10.11.5) and now the Panel inlays in InDesign CS6 offers all the options when a setting is selected.

  

  This is true for all types of coating.

  I uninstalled CS6 and reinstalled, updated, remove the preferences. Nothing helps so far.

  Fortunately the Panel works great on a second computer (Macbook Pro), which also has been recently updated to El Capitan.

  A previous post suggests reinstalling the toolset of DPS. But my impression is that these are updated through Creative Cloud now and am not sure that install them separately now are a good idea.

  Anyone have any ideas? Thanks in advance...

  Transferred to DPS forum.

  CS6 is unsupported under El Capitan. It was reported several inconveniences to crashes.

  If not help not trashing prefs, restore your previous operating system.

• Paragraph options are not available

  Since I switched to the creative cloud I had the problem where I can't see the exact settings for my paragraph. I can adjust spacing by using the upper and down arrows, but cannot see what they are attached to, or click a definition of space in the key box. As you can see below, all options along the left column of the box are displayed, but nothing on the right.

  

  See on the first page in this forum:

  Troubleshooting 101: Replace or 'trash' to your InDesign preferences

• Edit options are not available for PDF sent by email from the United Kingdom to the United States?

  I created documents in Word. On the printer option converted to format PDF and files can offer all change options (for me) but after send the PDF saved (from the United Kingdom to the United States and the United Kingdom to South Africa) or recipients could use editing options. It was confirmed that she has drive XI. Can someone explain why or how to fix?

  Bernd, I've created a public link, which is the shared - files Acrobat.com tell me if you can examine the file please?

• Remote Office - error message: version 6 Remote Desktop Connection Client or later is not installed

  Hello

  I am running windows vista home edition at home and I want to connect to my computer at work when I try it I get a message saying that the later version or version 6 Remote Desktop Connection client is not installed, it is not available in vista home? If not what is the best solution for this

  Thank you

  It is based on the operating systems on both ends of the connection.

  Here are some limitations you should consider where they apply: http://windows.microsoft.com/en-US/windows-vista/Connect-to-another-computer-using-Remote-Desktop-Connection.

  Here's how to enable Remote Desktop Connection in Vista: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.

  Here another article on how to enable the remote desktop connection: http://www.mydigitallife.info/2007/01/26/turn-on-or-enable-remote-desktop-on-windows-vista/comment-page-1/.

  Here's how to work with the desktop client remote: http://www.onecomputerguy.com/networking/vista_remote_desktop_client.htm

  Here's how to add DRC to Home Basic using 3rd party software (if necessary): http://www.pctipsbox.com/add-remote-desktop-access-to-windows-vista-home-editions/.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Spider sometimes works ok, sometimes in the rendering mode.__sleep and hibernation software are not available when the software rendering mode is running

  I have an ASUS K501N laptop.running 7 Home premium.

  Sometimes when I turn on it the office/display is not so strong, if I click on Spider I get a flag your who says run the game in software rendering mode hardware acceleration is disabled or not supported by your video card driver happens whensleep and Hibernate options are not available.

  Other times that everything works correctly.

  Anyone know why and how to remedy

  Hi leflaneur,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. when there is no sleep and hibernate options available?

  4. are you able to play other games on the computer?

  Method 1

  I suggest that you enable the acceleration of the display on the computer and check if the game works.

  (a) open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.

  (b) click on display settings, and then click Advanced settings.

  (c) click the Troubleshooting tab, and then click change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) move Hardware Acceleration complete.

  Method 2

  If the previous step fails, then you will need to download and install the drivers for the graphics cards updates by visiting the card manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my remote desktop connection does not show the three options under DESK remotely

  my remote desktop connection does not show the three options under DESK remotely

  like that: -.

  Allow the connection of computers running any version of remote desktop
  or
  That allow the connection of computers running Office remotely with authentication NLA

  Are you sure your market Win 7 Ultimate or Pro? If your running Win 7 Home Premium, you cannot use Remote Desktop host/server mode and you will not have these options.

  Go in Start > run and type winver at the prompt to find out what version of your race.

  If you are running Win 7 Home Premium or Starter watch TeamViewer as an alternative.

  http://www.TeamViewer.com

• Not remote desktop connection to use saved credentials

  Even if I clicked on "Edit" and put in my credentials Windows 7 Remote Desktop connection not automatically uses it.
  The checkbox 'always ask for credentials' is NOT checked.
  When I connect to other Windows clients on the target computer even their saved credentials are used properly.
  Is this a bug of Windows 7 Desktop connection remote or I do something wrong?

  Hi Rawsome,

  Thanks for posting of ' Getting Ready for Windows 7»

  Here is an excerpt from a remote help desk and how to make the article can help see the process as it is activated.

  To connect to a remote computer that computer must be turned on, it must have a network connection, Remote Desktop must be enabled and you must have access to the network to the remote computer (this could be through the Internet), and you must have permission to connect. For permission to connect, you must be on the list of users.

  Have you tried to change the settings of the remote computer?

  1. Open Desktop connection remote by clicking Start , all programs, Accessoriesand then clicking Remote Desktop connection. 2. Before connecting, click Options, and then make the changes you want in the display of local resources, programs, experienceand Advanced tabs. NoteTo save these settings for future connections, on the general tab, click Save. 3. Click connect. Please let us know if this helps you or if assistance is needed.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Through router remote desktop connection gets login screen, but the administrator is the only option (windows 7 pro)

  I have a new windows 7 pro system which has been configured to host a remote desktop connection.  There are 1 user account (active admin), the port number was changed from 3389 and I think that the firewall is disabled (it's Norton Internet Security and I tried to completely disable the firewall).

  When I established a remote connection from another computer on the same subnet, the client asks for login/password and the connection ends and goes directly to the screen of the user.

  This subnet has an internet connection via a firewall or router.  It has been configured to redirect incoming connections for the custom to the host port number.

  When I establish a remote connection from outside through the firewall I am invited to login/password, but the Welcome screen appears and the only options are administrator and other users.  Administrator is blocked for the account restrictions and using other users to type the login and the password does not work - it still fails on bad login/password.

  I've seen this problem described in other forums, but have not seen a solution - anyone got one?

  Thank you

  Hello
  I guess that its due to the settings.
  Check out this link. you might get a few steps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Kind regards.

• Remote Desktop connection requires the password when I did not

  I use Remote Desktop Connection to connect to my Windows 7 PC to computers with Windows XP employees. To do this, I need to put the credentials of the computer XP (name of login and password). It is a problem because the computers do not have a password. They are implemented in order to bypass the login step. How would I go about the use of DRC to connect to a computer without password?

  See if this article solves your problem:

  "How to turn on Remote Desktop automatic connection in Windows XP"
    <>http://support.Microsoft.com/kb/281262 >

  HTH,
  JW

• SE error message: the local policy of this system does not log in an interactive way, trying to access a remote desktop connection.

  Original title: the local policy of this system does ot allows you to open an interactive session

  I get this error message when you try to access a remote desktop connection.  The local policy of this system does ot allows you to open an interactive session

  Hi CamilleHolt,

  1. were you able to use the before remote desktop connection?

  You can try the following steps and check if it helps.

  a. Click Start, point to settings and then click Control Panel.

  b. double-click System and select the remote settings and then click the Remote tab.

  c. click Select users, and then add the name of the user account

  d. click Add and then click OK.

  Note: Adding users to the remote desktop group requires that you are connected via an administrator account.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer.

• Window sizes host display does not restore after a remote desktop connection

  After that my computer has been accessed via a remote desktop connection, the window size for my program do not restore their previous size.  I have monitors of landscape which are larger than most of the remote users.  When they log off my computer, my window sizes are stuck to the size of the monitor of the remote user.  Y at - it a setting or a way to get my windows to restore to their original size?

  No, there is no setting for this.  It's just the way it's always been since Remote Desktop was invented (formerly in the 1990s as Microsoft Terminal Services Client or MSTSC).

  At the heart of the problem is that the programs that run on the desktop have no way of knowing that the display size has changed, and even if they did, they also can't know what was their previous size.  It is not just stored.

• Several passwords for pop account are lost and the remote DESKTOP connections is no longer have registered credentials after logging out of the laptop to the domain and rebooted.

  Original title: passwords lost after reboot

  I have a user with multiple pop accounts and multiple rdp servers to which it connects

  When the laptop is connected to the domain he is allowed to save the credentials of rdp as usual and also its pop accounts work fine

  If the laptop is removed from the dock and hibernating come off hibernation works very well

  the problem starts when it restarts in fact the laptop when it is on the road.

  When he goes in outlook passwords for pop account are lost and all its Remote Desktop connections is no longer have recorded identification information

  his outlook passwords will save is no longer and rdp connections will save is no longer

  Once he returned to the office and connects back to the field all his pop account passwords are restored, the credentials of the rdp remain missing, but it can re - save them

  any ideas where to look for problem

  I also noticed inot laptopn with another user and will not experience the issue

  Hi, Robert Allen,.

  Thanks for posting your question in the Microsoft Community Forum.

  According to the description, you have a user facing problems with multiple pop accounts and rdp credentials when the connection / disconnection of a domain.

  Since the problem is associated with multiple pop accounts and rdp credentials when the connection / disconnection of a domain, the question you posted would be better suited for the IT Pro on TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 networking TechNet Forums

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.