Remote Desktop connects then stops after a few seconds

I have two laptops to Windows 7.  We run OpenVPN which I will refer to the VPN server.  The other is the Client and with me on trips.  Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems.  I also have an Open VPN Client with another port configured on a server QNAS.  I can connect without any problems.

I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS.  I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.

I have a router TP-Link-ER-6120.  I can configure the three ports to run in 3 separate VLANS.  When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP).  However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password.  I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons.  Then it crashes.  If he does until I can see the desktop, it automatically attempts to reconnect.  If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.

If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network.  If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above.  I also have a QNAS on my network with OpenVPN configured and operational.  If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.

Thus, work Desktop connections to local computers.

However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.

-J' I ping the VPN server during connection attempts and never lose the connection.

-J' used telnet to Server VPN 3389 port and it connects.

-J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both.  And then disabled Windows Firewall as well and still no joy.

Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?

Is it maybe a configuration problem on the side of the router?  Installation side route is a very simple graphic interface.  I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server.  I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.

Miss me probably something simple, but it launched my ass for weeks now.

Any ideas?

Advertisement

Hello Michael,

Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.

Certainly, I understand your concern and will try my best to help you.

To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

Please visit the link below to find a community that will provide the best support.

http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

I hope this information is useful.

Please let us know if you need more help, we will be happy to help you.

Thank you.

Tags: Windows

Similar Questions

  • Do not get the audit trail for oracle solaris running. It starts and then stops after a few seconds. How can I set up a secure target Oracle Solaris? cure

    I have installation BSM on my solaris 10 Server. I configured BSM to be sent to syslog. I registered my target secure on the server of the AV type Oracle Solaris. Add an audit trail of pointing to the syslog file. The Audit Trail starts and stops after a few seconds. the error I get from the agent log is

    [2014 11-25 T 11: 36:38.647 + 02:00] [collfwk] [ERROR] [] [] [tid: 10] [ecid: 192.169.1.50:11353:1416908198895:0, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

    Instance of Error initializing AuditEventCollector

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

    at java.lang.Thread.run(Thread.java:662)

    Nested exception:

    java.lang.NumberFormatException: for input string: "invalid audit trail: / var/adm."

    at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

    at java.lang.Integer.parseInt(Integer.java:449)

    in java.lang.Integer. < init > (Integer.java:660)

    to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

    to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

    at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

    at java.lang.Thread.run(Thread.java:662)

    ]]

    [2014 11-25 T 11: 47:49.248 + 02:00] [collfwk] [ERROR] [] [] [tid: 11] [ecid: 192.169.1.50:11353:1416908869249:1, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

    Instance of Error initializing AuditEventCollector

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

    at java.lang.Thread.run(Thread.java:662)

    Nested exception:

    java.lang.NumberFormatException: for input string: "invalid audit trail: / var/audit.

    at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

    at java.lang.Integer.parseInt(Integer.java:449)

    in java.lang.Integer. < init > (Integer.java:660)

    to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

    to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

    at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

    at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

    at java.lang.Thread.run(Thread.java:662)

    ]]

    Can you please help with instructions/solution implementation of Oracle Solaris secure target? A beginner in Audit Vault.

    I have the installation path for the database and which works very well

    concerning

    Thanks for the pointers. After you add hostname to the location of the trail, the audit trail is running

  • Remote Desktop Connection has stopped working since 7 for 2008

    Hello

    Dears I have strange problem and I have read everything discussed here, but it's not helping

    I have asus laptop with Windows 7 Home x 64 N53SM

    everything beautiful, and up-to-date

    Remote Desktop works well also

    one problem I can't use desktop remotely from my laptop to any server that is running windows server 2008 exactly... .other version 2003 work ok

    When I try to access to any server ruin win 2008 Server and put the server ip and password user name years and hit enter I see the error message

    Remote Desktop Connection has stopped working and computer laptop freez second then back with this message

    (Remote Desktop Connection has stopped working)
    A problem caused program stop working correctly
    Windows will close the program and notify you if a solution is available

    This is the complete log of the event viewer

    Results for: Microsoft product: Windows operating system; Version: 6.1.7600.16385; Event ID: 1000. Event source: Application error;

    ===========

    Name of the failing application: mstsc.exe, version: 6.1.7601.17514, time stamp: 0x4ce7ab44
    The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000374
    Offset: 0x00000000000c40f2
    ID of the process failed: 0 x 1418
    Start time of application vulnerabilities: 0x01cd48bcf13be48a
    The failing application path: C:\Windows\system32\mstsc.exe
    The failed module path: C:\Windows\SYSTEM32\ntdll.dll
    Report ID: 39102a22-b4b0-11e1-a89a-005056c00008

    ===========

    Please help me to solve this problem without need format :)

    Hello

    As you try to desktop connection remotely from Windows 7 to Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    Hope the information is useful.

  • "Remote Desktop connection has stopped working" problem on Windows 7.

    When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
    "Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.

    Here is the log of the event viewer:

    Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
    Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
    Exception code: 0xc0000005
    Offset: 0x000000000000c138
    ID of the process failed: 0xf90
    Start time of application vulnerabilities: 0x01ca55cc39bf05f0
    The failing application path: C:\Windows\system32\mstsc.exe
    Path of the failing module: C:\Windows\system32\NLAapi.dll
    Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8

    Hi dekopolis,
     
    Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • ISA 550W: Youtube streaming stops after a few seconds

    Since I installed the ISA 550W, Youtube videos stop after a few seconds. It happens on all my devices: Windows 8, Samsung Smart TV, Android, Windows Phone...

    I have the lates firmware.

    This problem doesn't happen with the other streaming like DailyMotion site.

    I disabled HTTP antivirus but it changed nothing. Web browsing is faster.

    Application control is not enabled.

    Any idea? Thanks in advance.

    Have you tried turning off all other security settings (i.e. an IP)?

    Have you tried to return to the previous firmware to see if the problem persists?

    Shawn Eftink
    CCNA/CCDA

    Please note all useful messages and mark the correct answers to help others looking for solutions in the community.

  • Audio playback starts and stops after a few seconds

    original title: Audio playback

    By my speakers (Windows 7) starts and stops after a few seconds.  I have troubleshooted but found no problem.  I configured and tested with good results, but the problem persists.  Anyone else know this or knows how to solve the problem? PLEASE HELP :)

    Hi NuttyNetty444,

    If you have not already the case, follow the steps in this document. This should solve most common sound problems in Windows.

  • 17 flash drive: videos played in Google Chrome stop after a few seconds

    Hello

    all the videos played in Google Chrome, stops after a few seconds after the upgrade to version 17,0,0,134 on Windows.

    Thank you

    I restart the pc and it works now, thanks.

  • Remote Desktop connects then disconnects

    Hello

    We have a Terminal Server 2008 license. Customers are XP/2003/Vista. We are facing a problem of disconnection intermittent rdp. Remote Desktop connects, disconnects immediately and automatically connects again. Does ina lines, sometimes the connection continues and was it disconencts again.

    Hi VenukaTiku,
     

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to connect to the server. Appropriate in instances of Windows Server.

    Please post your question in the Forums of Windows Server.

  • Satellite A110-180 - fan starts but stops after a few seconds

    Hello

    I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

    I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

    The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

    Thanks for your help,

    Hey Wiley,

    First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

    But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
    Check it!

    In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

  • Sound stops after a few seconds on you tube

    Please can someone answer me

    I'm trying to HERE music of YouTube when the video star from the beginning I have here the voice after a few second of my headphones aren't here more. That will be a problem.

    Thank you.

    original title: when I used to music HERE my headset does not work, thanks in advance

    Hi ArtanLala,

    1. This only happens when you play youtube videos or videos stored in the system as well?

    2 - is playing the video without sound or images also stops?

    3. what browser do you use?

    4. what type of Internet connection do you use?

    5. are you able to get a sound from speakers?

  • Windows import video repeatedly stops after a few seconds when you use DV cam to convert and import analog videos

    With the help of a Canon Elura 40 mini DV camera to import my old Video 8 tapes to the .avi format. I followed the instructions from http://windows.microsoft.com/en-US/windows-vista/Import-analog-video-to-your-computer-by-using-a-DV-camera . However, when I click Start import import will work only for a few seconds and then stops. If I keep restarting after that it stops every time (5 to 10 times), I finally get a message under the controls of cam DV that says "commands does not. Then it will keep the import without problem. I discovered this solution accidentally, but not knowing when it will eventually continue to record does get the departure point. If I import directly using a digital camera 8 this is not the case, but the Video 8 does not play well on the Digital 8.

    Thank you.

    Hello

    Method 1: You can follow the steps described in the article below that addresses this question

    Error message when you try to import video clips from a device on a Windows Vista-based computer: "the import device is not responding.

    http://support.Microsoft.com/kb/922977

    Method 2: you can follow the steps mentioned in the link below


    Troubleshoot importing video problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  • Adobe Acrobat stops after a few seconds

    Hello

    Recently, some of our users are problems where Adobe Acrobat Pro XI (11.0.16) stops after having been open for a few seconds.

    OS: Windows 8.1

    What I tried:

    • Removal tool including vacuuming (Download Adobe Reader and Acrobat tool - Adobe Labs ) can clean installation
    • Removal and remove manually the remaining records in C:\User\username\appdata\roaming, local and locallow, removing everything related to Adobe acrobat form the HKLM\Software and HKCU\software... then clean install
    • Adobe running with administrator privileges and it runs under a different user account
    • Removing and installing a version previous (11.0.05), which had the same stop to unextected
    • Removed the preferences as described here How to reset preference settings in Acrobat format.  (Note that he had no new folder preferences created after moving the former again and start Acrobat)

    So far, I have still no idea why this happens and how to solve it. I hope you can help.

    Thank you

    Thijs

    Hi thijsm96483536 ,

    He did up no error message when it stops? If so, please let us know.

    Also, please try referring to this link: Acrobat XI hangs at startup

    Let us know if that helps.

    Concerning
    Sarojini

  • connection mess up after a few seconds

    I have a computer dell latitude c400 pp03l with windows XP.  Recently, I ran against some malware, I tried to repair my installation of windows XP, but I ended up having to reformat.  After I reformatted I reinstalled the driver for the display and my USB wireless adapter, but now when I try to connect to my wireless using my USB adapter to connect for a few seconds only to have my connection fail.  The strange thing is that, the icons in the toolbar still read as if the connection is still active, but I can't go on the internet.  This question is able to be solved by installing some new drivers? Or is there another problem

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • Playback stops after a few seconds when streaming, slows down after a few seconds, when I look at D/L had video offline.

    Hi all

    I'm having a bit of a hairy problem - * ANY * video streaming, whether it be HTML5 or Flash stops after a number of seconds (rare) seemingly random.  YouTube, I sometimes get a buffer wheel to turn constantly, sometimes nothing.  On Facebook or other sites, nothing happens - freeze just a video.  Internet high speed or bandwidth is not a problem - 50/50 FiOS here.  Sound œuvres until frost.

    I tried to download videos in FLV Downloader, but when I look in the Media Player, they slow down until they are very bad after a period similar to the streaming video.  His work sometimes until the downturn, sometimes does not at all.  VLC plays the video at the right speed, but without the sound.

    I tried deleting and re-installing flash player, run a restore point when the video was working and all the other stuff I tried, but nothing worked and I'm stuck.  I have no idea how to solve this problem.  It happened randomly yesterday (apparently).

    If anyone has any ideas, I'd appreciate a helping hand.  I am a student that takes about half of its classes online, so without flash or HTML5 video, I'm in all sorts of trouble.

    Thank you

    Matt

    * edit * on a whim, I just open Spotify to see if that would work.  No bone.  Nothing plays.  Not at all.  The music does not play in Media Player, (local or streaming)

    Well, it seems I solved the question - I have no idea why this is happening.  I have a Logitech G35 Headset.  Sometimes when I restart Windows, I get sound out of it (usually noticed during a Skype call).  If I unplug and re - connect the headset, everything is hunky-dory with the sound and Skype.

    I just had to do, and when I did, all the videos and other media began to work very well.

    I'm cursed confused.

  • Acer Aspire D255E turns on, displays on screen, then stops in a few seconds

    I just bought an Acer Aspire D255E with a cracked screen.  I tested it and it worked fine.  Replaced the screen with a new brand, and the result is that it turns on, shows the opening screen, flashes what looks like the screen you get when you stop abnormally, then powers down.  It if also out tension in all the time even though I have F2 in the BIOS.  Anyone know what is happening here?

    Hello

    One of the panels for the Aspire One D255 2677 LCD part numbers is:

    LK.10105.002 - AUO B101AW06 V1 LF 200NIT 8MS 500: 1---> you have the right part.

    You wrote:

    "I forgot to take the battery when I first changed the screens, but it does not appear that should hurt anything."

    Unfortunately, Yes. If you have a small power surge when you plug in the Panel, you have damaged it.

    You can connect an external monitor or an LCD TV using the VGA port. I hope that you have not damaged the neat chipset.

Maybe you are looking for

  • Printing labels with HP and Mac laptop

    I have a HP Photosmart C3100 'All-in-one' printer connected to a Macbook Pro running OS X Yosemite 10.10.  Not finding how to print labels using HP manual for this printer.   Need help.

  • Can I use a module of RAM 2 GB in Satellite M105-S1021

    My TECRA stopped with the BSoD (on another thread) and I had to leave my old Satellite M105 - S1021 and try and get it going again. First problem was running PRO XP without service pack and it was a * LEGAL * XP home upgrade - tries to install the SP

  • Where can I get upgrades for my Equium A80?

    I have a portable Satellite A80-132 and I want to upgrade the memory of 1 GB. Can someone advise what type of memory by and where I can buy it? Thank you

  • C6180

    I installed the full software from HP for my C6180 including through all the patches and finally got the machine to sweep it.  The next time I turn on the computer I get the message "device is not complete.  Try to download again the software gets a

  • Want to 4-1010ew: messages function keys

    Hello I reistaled the OS WIN7 on my laptop and now I force know what software/driver is responsible for fn buttons messages. Previously, when I pressed for example flight + /-flight, the volume (sony beats) inciator appers etc.. Fn keys work fine, bu


HashFlare