Remote Desktop mouse does not

When I RDP to a machine ("WORKING group" Connected) Vista x 64 machine, I am unable to move the mouse but the keyboard works. It's really frustrating, please help. The issue has recently started to happen. Vinay Chopra

I just got the previous image of Windows Home Server OS, and he started to work very well.

Thanks for your help. Vinay Chopra

Tags: Windows

Similar Questions

  • my remote desktop connection does not show the three options under DESK remotely

    my remote desktop connection does not show the three options under DESK remotely

    like that: -.

    Allow the connection of computers running any version of remote desktop
    or
    That allow the connection of computers running Office remotely with authentication NLA

    Are you sure your market Win 7 Ultimate or Pro? If your running Win 7 Home Premium, you cannot use Remote Desktop host/server mode and you will not have these options.

    Go in Start > run and type winver at the prompt to find out what version of your race.

    If you are running Win 7 Home Premium or Starter watch TeamViewer as an alternative.

    http://www.TeamViewer.com

  • Remote Desktop credentials does not-2 windows 8 pro machines

    Trying to office remote set-up for the first time in a few years. 2 win 8 pro with a lot about farting machines I can see the two machines on the network, I configured the write permissions and can access files and folders, I get the login prompt and even jumped through all the hoops here:
    Add a user account to a group

    I put not too windows firewall.

    When I try to login and get a safe area of windows saying my credentials did not work. He asks me to connect using my microsoft account. The account I have to connect on both computers with - so I know the password is correct. I try to use another account (the two accounts on both computers use the same user name and password), and it always rejects it.

    I tried to connect to my account online and get an error, and then the password was rejected, so I reset the password.  I tried logging in tp remote desktop using this password, but that does not work either.

    LogMeIn took like 5 minutes to Setup. I've been at this for hours

    Hello

    I suggest you send the request in the Technet forums to get help:

    Reference:

    http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

    Thank you.

  • In windows Vista (Home Premium) Remote Desktop connection does not work correctly

    I installed and re-installed my Vista (Home premium) 2 times already because of the remote desktop connection.  I have a problem connecting from another laptop running windows 7 to connect to my desktop running Vista.  The remote control works on the other hand the meaning of desktop running vista, laptop running windows 7 Professional.
    Looking at the Vista under \System\Remote setting\Remote tab which shows the remote assistance box, but the Office box where you can choose what type of connection can be established remotely is missing.

    I went though all as responses to forum, but nothing helped.  Even in a "sfc/scannow" command prompt running did not help.  It is said that he finds corrupted files, but it cannot solve all corrupted files.  That's why I reinstalled windows hoping to fix this problem but WITHOUT SUCCESS.

    Can anyone help?  I've attached a screenshot of what I see in vista.

    You can connect FROM an original version of Windows to another computer, but you cannot connect to an original version of Windows.

    It is not an 'idea' it's hard cold fact that is at least 12 years old.

  • Remote Desktop screen does not minimize.

    I have windows 7 on my laptop and windows xp on the remote computer that I log on. I'm not able to minimize the screen of the remote computer in a single click. I have to click 10 times to make it to minimize. This problem started since I upgraded my Lalonde from xp to win 7. Help, please.

    Hello

    You use any third-party program to remote?

    For remote desktop connection problems, I recommend that you post the question in the Technet forums to get help.

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproui

    Hope this information helps.

  • Remote Desktop connection does not Windows 7 Home Premium computer connect

    Hi guys,.

    I regularly connect to computer Windows 2003 Server R2 of various computers via remote desktop without problem. However, I just got a brand new computer running Windows 7 Edition Home Premium and for some odd reason I can't connect to the Windows Server 2003 by using Remote Desktop connection. I tried to disable the firewall on both computers with no positive results. My DRC telling me that it cannot connect.
    Can someone give any idea why this computer refuses to connect? Y at - it no service apart from the DRC services that should be running and can I get a list and try to restart their? Is it possible to re - install Remote Desktop connection? Maybe a download for windows 7 because I find only one for Windows Vista & XP.
    Thank you
    Viclabs...

    Hello

    I suggest you to report this issue in support for Windows Server 2003 TechNet Forums: http://technet.microsoft.com/en-us/windowsserver/ff354964

    Thank you.

  • Using desktop remotely, I try to print on a printer different computers by the server and remote desktop. Does not

    With Server 2003, when you remotely connected with office, you could share your printers with everyone who has logged on to the server with the Office remotely and printed at the printing house they shared.  If the server had 10-12 different printers to that we could print.

    With 2012 the only printers that one session on the server is its own and the printers installed on the server.  We must be able to log in to the computer 1, with Imprimante1 and printing to the printer on computer 2, through desktop connection remote.

    Someone has suggestions I can see 2 printer who has logged the server with 1 computer?

    Oh, using the boxes of windows 7

    Todd

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Remote Desktop AP does not connect to the server

    I have a hotkey remote of ap generated in Windows Server 2008. It works fine on a private network virtual to a laptop using windows7, but not a laptop using Vista Home premium.  I noticed that the security popups on two laptops says "will be used to connect to these credentials: and then correctly gives the full servername.domainname, but the domain field following the name boxes & user password is empty in the version of W7, while the same field in the version of Vista incorrectly changes the name of the server of the domain name."

    Thanks, but I have now solved the problem by selecting another user and by putting the domain name to the user name.

  • My mouse does not work with Windows XP

    I have Windows XP and I changed the disconnected a mouse and pluged the other without in regards to power off of the desktop, the mouse does not move I tried other mouse, nothing, need help, P

    This diagnosis you have done to date?
     
    Error messages?
     
    Please provide details about your current problem.

    We are better able to help you if you help by providing us with as much information as possible...

    Suggestions for asking for help on a site.

    http://support.Microsoft.com/kb/555375

    http://www.CatB.org/~ESR/FAQs/smart-questions.html

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

    Most often when a device is not it's because of a driver.  Try reinstalling your.

    It works for win 7 & 8

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • How to join start in safe mode when the mouse does not work?

    (I'm on another computer to ask this question). I'm in safe mode; mouse does not work; arrow keys work but don't go to 'start '. How to get started?

    Assuming you have the office showing with all applications minimized or closed, Tab or F6 should pass the Start button and a few other "elements" on the taskbar.  Look closely and you will see a light preview highlighting of the selected item.  Press the Enter key to activate it.

    In XP Safe Mode, the cycle is start button > Quick Launch toolbar > [of any application taskbar icon] > clock > desktop icons.  While the Quick Launch toolbar is highlighted, the arrows move among the icons in the QL toolbar.  While the desktop icon is highlighted, the arrow keys will be touring all the desktop icons.

    Have a look here--> http://support.microsoft.com/kb/301583

  • My left clicker on my mouse does not work?

    My left clicker on my mouse does not work properly. The right clicker can be used to select things. I don't know if something has been disabled, or if my mouse must be replaced. What should I do?

    Hello

    Control Panel - mouse - for left-handed. If the opposite problem on the other side
    Then, the mouse has a problem and needs to be replaced.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Wireless mouse does not work after update Vista graphics driver

    Hey whats goin' I'm looking for a little help here Irecently downloaded a new graphics driver on my laptop and rebooted... suddenly all OOF, mouse not working anymore... What do I do?

    * original title - my wireless mouse died after I downloaded a driver what should I do? *

    Hello

    The video driver may be accessory to the mouse does not.

    Reboot again. If the mouse still does not work, check the batteries in the mouse and receiver
    connection. To the need to update or reinstall the mouse drivers - check with Microsoft Hardware, LogiTech
    or anything done to the mouse for the latest drivers.

    ==================================================================

    If this seems to be a USB problem AFTER the foregoing:

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
    all except the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • 8600 desktop icon does not

    After a Windows 8.1 update, the icon on the desktop to my Office Jet 8600 has stopped working.  I uninstalled the drivers and then installed the drivers.  I've used all the avaiable trobleshooting assistants and they all claim that everything is installed properly.  The icon is the gateway to fax and scanning my PC without having to go through the printer.  Unfortunately, the installation disk is for windows 7 and is of no help to 8.1.  Thanks in advance...

    Hello GTR81,

    I understand your Officejet 8600 icon on the desktop does not work after upgrade to Windows 8.1. I will do my best to help you! I noticed that you said in your previous post that you have three copies of this software on your computer.

    You have three copies of the Officejet 8600 in devices and printers or where exactly on your computer? I recommend you clean this software. Follow these steps:

    Please follow this HP document uninstalling the software of the printer. When it finished, I would like you to clean your Temp folder on your computer:

    (1) on the keyboard, press the Windows key and press 'R' together, then click on, and then type % temp % enter.
    2) press Ctrl and together on your keyboard (this will highlight all). Right-click with your mouse and select Delete.

    Now, perform a clean boot on your computer by following this Microsoft document here. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program.

    If your desktop icon does not work yet, I would recommend that you run this patch of this document from HP opens Assistant HP printer with an error in Script or in Notepad.  I know that you do not receive a script error, but this patch can help if your printer Assistant loading is not. I will seek forward at the hearing on your part have a good night!

  • Do right click on the mouse does not.

    Bought a new computer with windows 7 pre-installed touchscreen and the latest internet explore. The "right-click" wireless mouse doesn't work at all on the desktop or start menu Explorer etc. Is - this mouse does not, or something else. I connected a wired mouse and the same problem.

    Thanks for your reply. Turns out to be a faulty mouse. Changed for the wired world is fine.

    Thanks again
    siltmanstewart.

  • Left click of the mouse does not respond in the office and I could see 2 together (Picture) Office

    Everything works well today that the left click of the mouse is not responding on the desktop (icons does not meet the double click). Right click works ok, and left click works well on programs and in the taskbar.

    Weird things here, it's that I can see two desktop at the same time.

    I have attached a picture.

    Can someone help me?

    Thanks in advance.

    I got disabling the system restore, so I can't go back to a good version.

    Turn off the system restore makes things much more difficult. Your problem is probably due to an inappropriate registry setting. You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.

    Check the date of the file C:\Windows\System32\config\regback\System. It precedes the date when you became aware of your problem? If so, follow these steps:

    1. keep tapping F8 during the first phase of startup.

    2. Select repair in the menu that looks like this.

    3 log in as administrator if you are prompted.

    4. Select repair when prompted.

    5. Select the command line in the menu that looks like this.

    6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
    DIR C:\Win*
    Dir D:\Win*
    dir E:\Win*
    until you find the Windows folder.
    I'll call this "Q:" drive
    7 type these commands exactly:
    CD /d Q:\windows\System32\config
    xcopy *. * Q:\MyRegBack\
    CD RegBack
    8 type these commands:
    copy software / y...
    /y copy system...
    /y copy Sam...
    (the two points are part of each order)
    10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

Maybe you are looking for

  • Secure the hard drive

    Hello Secure hard drive: Anyone know how I can return this device to the factory settings as someone created a container of arch and I want the entire hard drive is encrypted? I have all the relevant passwords etc for encryption. OS is XP SP3. Thanks

  • My quick web access light does not turn on Sony Vaio VPCEL

    Sony Vaio VPCEL 2S1E

  • HD constantly available

    HP Pavilion p7-1020 Windows 7 64 bit The HD constantly being accessible, even if I did not open program. The HD blinks several times per second, and I can hear the disc moving head. I have scanned for viruses, malware, etc. Stop unnecessary processes

  • have vista(32bit) with the Service Pack 2 won't not let me load the windows installer

    any upgrade I have try to stop me because he says that my Installer is not working try to upgrade to windows 7 and I can not install the Advisor to upgrade... Please help!

  • Why isn't more save attachments in Windows Mail?

    Something has happened recently to my Windows Mail prevents me to save attachments in the menu.  When I go to 'Save attachments' in the 'Menu', it is dimmed.  I followed the instructions of Windows under Tools, Options, security: I unchecked the box