Remote Desktop works when my office and cell phones are on the same system, but then when I take my laptop home, it does not work!

Similar Questions

• Photosmart Prem C410 all-in-one: our laptop and printer AiO are on the same network, but laptops can 'see' printer

  Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices).  We were able to connect between laptops and printer without problem (printing, scanning, etc.).  A blow, or laptop computer can "see" the printer.  I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network.  I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named.  Help

  On the printer's wireless radio was 'on' but I clicked OK anyway.    Disconnected and reconnected to the network and noted the address IP of the printer had changed.  Laptops are now able to see the printer.  Problem is solved.

• I forgot my password while my wi - fi and cell phone are disabled

  Hello my dear it

  I forgot my password so I searched in Internet sites and found 3 ways for restoring my iphone but unfortunately:

  1-i have my Apple ID user and pass, but the wi - fi and cell phone are off and I clouldn can't disable the password to icloud.

  2. I did recovery about 6 times but unfortunately it did not work.

  What should I do now...?

  Please answer me... Please...

  sincerely

  Ali

  • Connect your device to your computer and open iTunes. If you don't have a computer, borrow one from a friend or go to an Apple Store or service provider authorized Apple for help.
  • When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo. Keep until you see the screen in recovery mode now.
  • When you see the option restore or update, choose update. iTunes will try to reinstall iOS without erasing your data. Please wait while iTunes downloaded the software for your device.
    If the download takes more than 15 minutes the device out of recovery mode, you must repeat these steps and choose restore instead of update when you return to this step.
  • After the update or restore is complete, configure your device. If you have backed up your device with iTunes or iCloud and you need to restore your device in step 3, you may be able to restore from your backup during installation.

  Contact Apple Support so you can not update or restore your device with the recovery mode, or you cannot use the recovery because of the broken or stuck buttons mode.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Solid and sketched movement Null follow the same path, but in different places.

  I'm editing on After Effects cs6. First, I will describe two situations and what I 'm able to do it, then I will explain what is the heart of the problem.

  First situation: when you use 'motion tracker', I'm going to "Change the target" of a null I titled 'Tracker '. As you know, this will allow my null to track movement on caterpillars and synchronization with the movement of my video. It worked well.

  Second situation: Let's say I have a white canvas and simply stick to a null value. I take this null and draw a few sketches everywhere motion that I love. Then I take a solid. I have an effect as an 'Individual' to this massive. Now, if I take the "XY Position" of this effect and make a selector to the position of my movement sketched null, the effect will now follow the path that I have outlined. It worked as well.

  My problem: I tried to combine the two situations above, in order to get my movement sketched special effect for synchronization with the video track. I tried this by first taking of null value "Tracker" my goal for motion tracking (1st situation). Then I sketched movement a 2nd null. I pick whipped this 2nd null for "Tracker" and the sketch to synchronize with my video successfully obtained.

  HOWEVER, once I tried a particular effect with the path of my sketch of movement of synchronization (2nd case), I found what happens: my particular effect was indeed following the path of my movement sketched null, but it was displayed in the upper left corner of my screen, WAY OFF from where my movement sketched null has been placed in fact. So sketched movement null and the special effect were both the same way, but not in the same place.

  My question: How can I synchronize my effect go exactly where I want it (with a null value of movement sketched) and still get it to follow along with my video? I know it's difficult to describe without showing it directly in person, but I hope it's a simple question that has a simple answer with him.

  Mylenium

  As described in my first post: when pick - whip sketched movement Null Null in Tracker, following the path outlined particular effect, but was suddenly moved to another point in the frame.
  
  However, there was a simple solution to this problem after all. For those who are interested, once the setting of Position XY of the particular effect pick-whipped in the movement sketched Null, not NOT-selector of the said Null value Null of Tracker. Instead, pick - whip solid [which has the particular effect] on the Tracker Null toured and everything is aligned.

  But thanks for the idea!

• Integration of material NI_DAQ and NOR-DAQmx software on the same system PCI-DIO-96

  Hello

  We have a great system that is developed in VB and uses the traditional inherited NOR-DAQ system. The system controls the controller PCI-DIO-96. We would like to upgrade to some parts of the system to NOR-DAQmx and use VB.Net and we know that you can install both systems together on the same computer.

  We have a few questions:

  (1) once the legacy of NOR-traditional DAQ OR DAQmx software can be integrated in the same system. Some parts of the system will always use the VB and the other parties will use VB.Net.

  (2) if the answer to the first question is Yes. Are there hardware or software limitations? Is there a recommended way to integration?

  (3) are there articles based on the knowledge about it?

  Thanks Jeremiah

  There are a number of limitations to the use of NOR-DAQmx and NOR-DAQ traditional at the same time.  First of all, only one of the drivers can access the device at a time.  To switch between the drivers, I recommend that you read this knowledge base Article: that I can use OR-DAQ traditional (old) and NOR-DAQmx simultaneously?  You will need to use the equivalent functions of VB .NET to switch between the pilots.

  In addition, the system should use Windows XP or an earlier version.

• Sharing between the office and cell phones driver

  How to share a driver (with data files) from the desktop (Windows 7 Home Premium) with a laptop (window Vista Home Basic) through a router?

  Hello little bb,.

  A quick correction: you mean in car no driver.  A road is a place of storage for files, a driver is a program that communicates with the hardware (printers, cameras, scanners and the mouse have a drivers for example).

  In any case, to share your car from the desktop to a laptop computer, there are several choices.  This tutorial on this page provides an excellent walkthrough.

  However, an easier method is to use the "Homegroup".  Since the first computer, open your Start menu and type "homegroup" to find the option to create a home group.  Once created, you can do the same from the laptop to join the home group.  Once completed, the two computers will see each other and you will see a new folder 'group' on the left side of your file Explorer that allows you to access shared drives on the other computer.

• I bought the iPhone 6 model MG472J/a of the Japan. I want to use it in Bangladesh. But the sim card of Bangladesh supports my iPhone. I contacted with suggested iPhone Robi and Grameen Phone to unlock the sim card but have found no solution.

  How to unlock the lock carrier unlock where there is no service?

  amindu14 wrote:

  How to unlock the lock carrier unlock where there is no service?

  You do not have.  IF the carrier does not unlock then you can't get it unlock.

• Remote Desktop works Win 7, but local printer receives a RPC error

  I have several laptops with Windows 7, which connects to 2 computers, using Windows 7 via Remote Desktop. Except for 1 computer, all the Remote Desktop connections work fine.

  A laptop will connect with Remote Desktop very well and allow the user all privileges, except printing on the client computer. The printer is shared in the same way for other laptops, the printer appears as an option and is selected, BUT when a print job is requested, this laptop computer receives a CPP print server error message.

  I also tried to disable the firewall on this laptop and continue to receive a the same printer error, so I don't think that it is a firewall issue. I also replaced it with one of the other phones using the same material and the printer works fine. One last note, I checked that the dirvers impression is correct on the laptop problem. When you are working on the local client computer, the printer works fine, the printing problem occurs only with a remote desktop connection.

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps.

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I ha

  I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I rather Acrobat format if possible. Thank you

  Hello

  Could a right click on the PDF file > open with > choose program by default and select CD player as default PDF Viewer.

  You can do it from the control panel as well.

  This would make CD player as default PDF Viewer.

  Concerning

  Sukrit diallo

• Hello, I have a full desktop in Adobe Muse, site and I want to convert it into a version Tablet & phone, then, how would convert the site Office to Tablet & phone to copy the entire office content and site structure? Thanks for any help.

  Hello, I have a full desktop in Adobe Muse, site and I want to convert it into a version Tablet & phone, then, how would convert the site Office to Tablet & phone to copy the entire office content and site structure? Thanks for any help.

  You can not automatically convert. Click on the "tablet" or "Phone" at the top of your plan view to create these versions.

  You can then copy and paste on any content you want has more of your office.

• Inserting a Flash Drives and cell phone causes blue screen - stop 0x3B

  Original title: inserting a few Flash Drives, but not all, and cell phone causes a blue screen of death

  Computer Dell Inspiron 518 Intel core 2 quad, 6 GB memory, office 2 years.
  HP Vista 64-bit, Service Pack 2, updated version 6.0.6002 fully implemented.
  No change to HW or SW immediately before the first detected failure, but the USB port which is not often used.
  History - off Ready Boost after a short experience and installed months ago driver and card Renesas Electronics USB 3.0.  This driver has been disabled through all of this, but I've not yet physically removed the card.  Disable ready boost was simply to stop - no other instructions not found for removal.

  Anitvirus BitDefender and Malwarebytes scans are both clean.

  A flash drive works fine, but three others cause seconds blue screen of death after installing into any USB port.   Bought a new flash drive and it also causes a crash.  Found cell phone also gives BSOD.  All work fine on another computer.  USB is currently led printer, external hard drive, digital camera downloads and keyboard/mouse very well.  Tried both USB ports with the same results and back and disconnected all other USB devices except the keyboard and mouse.  Remove and reinstall all USB drivers (6) one by one (the 1CH9 Intel USB controllers host family) and USB controllers enhanced (2);  also storage device USB and device drivers USB Composite and façade drivers card reader.  After each new facility, any 'bad' flash player causes immediate crash.  'Good' flash player's Centron Centon Pro 8 GB and one of bad flash drives is one attached PNY 8 GB, another a San Disk.  I think, but I don't remember, that the 'good' flash player was installed for Ready Boost test.

  Unable to find a failure code or no trace of several accidents in the problem reports.   Here is all the data of failure that I could find:

  0x0000003B
  (0x00000000c0000005)
  0xfffff8002a8db87
  0xfffffa601

  I'm puzzled.  Thanks in advance.

  Tom

  Hello

   
  You must update the BIOS (Basic Input Output System) and the Pilots of the Chipset using the computer manufacturer.

• Cannot transfer images from the camera and cell phone.

  Original title: print printer print

  I have a HP Photosmart C42oo all-in-one printer. It works fine and prints, but I can not all images of my little Kodak camera or my cell phone to my computer. It is as if the connection does not exist and in fact it s use to work perfectly until I get a new computer with windows 8. Can someone please help?

  Hello

  To provide the proper resolution, I would need more information on your side.

  1. what exactly happens when you try to transfer the images from the camera and cell phone?

  2 are the devices found on the computer?

  3. do you receive any error messages? If Yes, what is the exact error message?

  I suggest to use App Photos and to try the steps, click the link:

  Organize your photos
  http://Windows.Microsoft.com/en-in/Windows-8/organize-photos

  Please provide the necessary information to help you further, I'll be happy to help you.

• HP ENVY laptop - 15-ae101nx: when I put my cell phone battary trolling the games what should I do?

  When I put my cell phone battary trolling the games what should I do?

  Games run perfect when I put plugged in, but when I play on games battary became late?

  Help me.

  Hello @XxHamodyGamerX,

  Thank you for visiting the HP Forums!  You have come to the right place to ask questions, find solutions and get help from others in the community!

  I read your post on game performance below of your DESIRE for computer laptop-15-ae101nx then on the battery and wanted soft hand for you.

  This document should take you in making adjustments to the different systems of power supply on the system. Battery power, it is probably defined by default on energy saving , which will reduce the performance of the system in order to save energy and extend the time between charges.

  Microsoft also has very detailed information here on different powers available plans.

  Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Thank you.

• "back" button does not work and the home page does not display on startup

  My buttons next and previous no longer work. They show just gray and I cannot click on them.
  Also my home page does not appear when I launch firefox.
  I reinstalled firefox 4 and then I went back to firefox 3.6.16 and have the same problem in both versions.
  Don't know what to do anymore
  I just found out that when I opened a second window everything works well in the second window, but it still does not work in the first window.
  The same thing happens when I close both windows. The first window of my home page does not appear and the back button does not work, but the second window is operating normally. Including my home page.

  Try:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox