Remote panels and LabVIEW 2009

Similar Questions

• cRIO-9073 not appearing is not in devices and Labview 2009 targets

  In MAX, I show the following: a cRIO-9073 with NOR-RIO 3.0.0 installed. My system software has NEITHER-RIO 3.0. In LabView 2009, when I try and add the cRIO to my project in LabView 2009 in New-> targets and devices, I don't have a list in time real CompactRIO and my cRIO does not appear. I tried to add manually with its IP address, but it does not work either. I've updated the cRIO to LabView real-time 9.0 software.

  Is there other software that I need to update on the cRIO so that it is visible in LabView 2009? Do I need a new version of NOR-RIO?

  Thanks for any help.

  Todd

  I upgraded from NEITHER RIO NOR-RIO 3.2.1 3.0 and LabView 2009 seems happy.

  See you soon,.

  Todd

• Conversion to get examples of LV of the 2012 LabView and LabView 2009

  Hi all

  I need to convert (if possible) these examples of screws to use one ID camera with 12-bit resolution.

  Thanks in advance,

  Fabrizio Croccolo

  It is very easy to convert.

  File > save for the previous version...

  I've already converted them for you well.

• Tap the Navigation Palette missing in LabVIEW 2009 Panel

  Hello

  I developed an application using LabVIEW 8.6 with the touch panel module and a TPC-2012 (Windows CE). I've now upgraded to LabVIEW 2009 and I'm trying to run my code in a TPC-2512 (XP Embedded), but the 'Touch Panel Navigation Palette' I used previously to be found in the new facility. In my view, there is a new range of "Navigation controls" in 2009, but I would like to avoid having to re - design my app with new controls.

  8.6 navigation controls are no longer supported in LabVIEW 2009 or have I missed something? The TPC is displayed in the Project Explorer and MAX, and I'm able to deploy and run applications on it. But the old vi navigation do not work and as I mentioned before, the palette is not even appear when you try to change the vi on the development computer.

  Any help would be appreciated.

  Thank you

  Hello

  The navigation screw touch panel are not displayed to the top, because you are currently using the TPC-2512. If you take a look in the Help file on the Navigation, it states: 'installed with: Touch Panel Module.» This topic can not match its corresponding palette in LabVIEW depending on your operating system, or the licensed products and the target. "I checked this with both LabVIEW 8.6 and LabVIEW 2009 targets. Due to the different architectures, you get a different set of palette (Windows CE vs XP Embedded).

  -Zach

• NOR-Fieldpoint supported in Windows 7 and LabView 8.6

  We have a 'classic' with an ethernet controller FieldPoint system. We want to be able to read/write from/to the FieldPoint network using a computer with LabView 8.6 and Windows 7. NOR-FieldPoint is supported in LabView 8.6 and Windows 7?

  Kind regards

  Nate

  Hi natewkidd,

  I feel like some confusion between the operating systems running on a development computer (as Windows 7) and real-time operating systems that run on our real time (such as the PS-2000) controllers. I will do my best to clear up this confusion first answering your questions.

  (1) what is the difference between 2009 LabView real-time and LabView 2009?

  LabVIEW Real-time 2009 is actually a software officially known as 2009 LabVIEW Real-time which is installed after the LabVIEW 2009 development software to allow the user to develop and deploy applications in real time on targets in real time as your PS-2000. You can consider the LabVIEW Real-time 2009 almost as a plug-in for LabVIEW 2009 deployment and development of real-time applications.

  (2) if I have a PS-2000 on the ethernet network and to use a computer that is running Windows 7 and LabView 2009 for record and display data, will I still be able to communicate with the network FieldPoint screws write FieldPoint to my Windows 7 computer?

  If you go just to use the PS-2000 as a network module (NOT to deploy a real-time application to run on the PS 2000 itself), you should be able to communicate with him using just the read/write FieldPoint screw on your Windows 7 with LabVIEW 2009 machine and the driver NOR-FieldPoint 6.0.5. In this case, you actually do not need the Module Time since you do not deploy the application to the target in real time.

  About the PS-2000 unsupported beyond LabVIEW 8.5.1, is because the controller's memory is not large enough to hold the software that is installed on the controller with LabVIEW 8.6.x Module real-time and LabVIEW Real-time Module 2009. For more information on this, you can check this knowledge base article.

  I hope it's useful! Let me know if you have any other questions.

  Thanks for choosing National instruments.

  Aaron Peña

  National Instruments

  Technical sales engineer

  http://www.NI.com/support

• Use the DAQCard 1200 with LabVIEW 2009 map

  Hi, I have a DAQCard 1200 and LabVIEW 2009 card. Can I use this device with this version of Labview? Is there anyway to make it work? Thank you.

  Hello ACTS,

  There is a difference betweenmx and traditionalDAQ DAQ!

  Installation of NI - DAQ6.9.3 is ok as outlined in this KB entry link above.

  But: you will find all of the DAQmx like this "DAQ Assistant" features! (Btw. why you insist on the use of ExpressVIs?)

  You must use the TraditionalDAQ functions instead. (There should be a few examples too...)

  Yes, DAQmx does not support your DAQCard1200. But TraditionalDAQ6.9.3 will do...

• Any LabVIEW 2009 Front Panel Gage displayed as circle deg continues 360?

  Any LabVIEW 2009 Front Panel Gage displayed as circle deg continues 360? I want to display a position of motor on the Panel before LabVIEW as a circle of 360 degrees. Is there a way to make the pledge appears as a circle of deg continues 360?

  dbaechtel wrote:

  Gauges and dials, buttons, none of them seem to be designed for continuous operation of 360 degrees. Of course I can set the scale of 0 to 360, but I can't get rid of the gap between 0 and 360.

  How to set up a pledge to show a continuous 360 degrees without a gap between 0 and 360?

  To change the gap, take the line high marker and move it to the desired location (in another origin, enter the low marker).

  Also, don't forget to wrap the raw in 0.360 rank if it falls outside. Here's a quick example (LabVIEW 8.0).

• Even police "Tahoma: pt 8 looks different in LabVIEW 2009 and MS Word (EXcel, Windows, the Menu bar".

  I developed a LabVIEW 2009 application, that uses only the "Application Font" for each where block and front panel. LabVIEW.ini I'm goon to set appFont = "Tahoma" 8

  Because when I look at my computer, display properties > appearance > advanced > Item = Menu then it seems it use Tahoma 8pt.

  But when I look in the Windows Menu and my LabVIEW Application, the two are very different with respective police.

  Could someone try this answer this question?

  How can I do the same two in appearance?

  Is LabVIEW has different fonts defined and setting than Windows?

  Concerning

  Hemant

  [email protected]

  Good thing, never think of this before...

  In any case here table of differences: (MS Write vs LabVIEW):

  

  Andrey.

• Toshiba 40 HL 93 R does not remote or and door panel

  Hi all.
  My Toshiba 40 HL 93 R does not remote or and door panel.
  I guess the TV is blocked or immobilized because remote is 100% functional.

  How can I unlock TV? Combination or other. I can't find anything in the manual of the TV

  I put t think that the TV is locked... to my knowledge, it is possible.
  You can block single channels setting a password, but this does not affect other functions of the TV.

  Disconnect the TV from the food sector and wait a little crisper.
  Connect the TV to the network, then press power button to power ON the TV

  It work?
  In case it doesn't, you should contact the service point because it seems that your TV equipment is affected.

• Impossible to find the field read and write VI in labview 2009

  where is the field point to read and write VI in labview 2009

  According to the version of LV, BT pallets can be sensitive to the context. Try to create a project and add a fieldpoint target to the project.  Right-click on the target of FP in your project and select new > vi.  Now FP functions should appear

• How to interface a simple way using LabVIEW 2009 simulink model and SIT?

  Hello

  I finally found a way to use a template simulink with LabVIEW and the Toolbox to SIT, but I'm not satisfied.

  If you have any suggestions, the link of resource that I missed, please do not hesitate to answer

  Note that I do not know much about simulink, so that is my question seems stupid, let me know what

  Software configuration

  OS: Windows (not an RT target)

  LabVIEW 2009

  SIT 2009

  question 1: interfacing the model DLL (mapping considerations) with a driver VI

  We have created a model of DLL by using the 'Workshop in real time' tab in simulink.

  In LabVIEW, launch us the tool 'SIT connection manager' and try to use the DLL with a driver VI by mapping the e/s model for screw/lights orders.

  The fact is that I fail to connect to my controls/indicators VI/o model because they do not appear in the mapping dialog box.

  The simulink single objects that I managed to map are "constant" and "test points" while I need to edit the template simulink itself (example below)

  

  Are in e/s model, not considered as part of the parameters of the model? (this could make sense because the mapping says in fact that it operates on "model parameters")

  Is it possible to link the IO model VI commands/lights?

  Note:

  -the "configure HW i/o mapping" dialog box allows me to map model e/s with e/s HW...

  -The examples also use these "constant" and "test points".

  2nd question: use of direct screw SIT

  I tried to use the DLL directly with the screws SIT (code example below)

  This kind of code works well on another project (target of 8.0/RT LV) but not on the current project (LV 2009/Windows)

  The second stage of the model never ends:

  -0-index of the loop works as expected (model doing its job).

  -index of the loop 1 starts normally, but execution is stuck in the 'SIT scheduler.vi.

  Then I have no choice that to kill LabVIEW ("Reset screws" windows appear if I try to stop/close them).

  

  Is there a reason that I do not see what explains this behavior?

  Thanks for reading.

  Any help appreciated.

  Kind regards

  Hello

  I spent some time analyzing the VI driver as you suggested.

  Here are my findings.

  Question 1: the SIT connection manager does not pass to the model SW controls/indicators. Only, it allows the user map HW AIs/AOs.

  The only solution I found (to have a SW - for example a shared variable - object that is mapped to an input/output model) is to customize the VI driver that is scripted by the SIT Connection Manager ("_Baserate Loop.vi" in the flat sequence structure named "read code")

  Question 2: after spending some time in the VI driver, it seems that the VI to call right is not 'SIT scheduler.vi' but 'If SIT take model no time' (which uses the other as a Subvi)

  

  My conclusions are correct? If I use the API in the wrong way, please let me know.

  Kind regards

• LabVIEW 2009 x 64 and generator application

  Hello

  My organization has just got a license for LabVIEW, so I just installed 2009 x 64.

  My question is this:

  If I build applications written using LabVIEW 2009 x 64, they only work on 64 bit computers? I would like to test this, but my two computers are 64-bit computers. I had a brief look through the construction specifications, but it doesn't seem to be something on the 32/64-bit compatibility.

  Thank you.

  J

  Does that help?

  http://digital.NI.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98

  Can q. I run an executable built with LabVIEW 64-bit on a 32-bit computer?
  A. you cannot run the executable or LabVIEW 64 - bit, Run-Time Engine development system on a 32-bit computer.

  Can q. I run an executable built with LabVIEW 32-bit on a 64-bit computer?
  A. Windows can run executables for 32 bit on a 64-bit computer. Therefore, the development system LabVIEW 32 - bit Run-Time Engine and executable can be run on 64-bit Windows.

  Can q. I have the 32-bit LabVIEW and LabVIEW 64 bit installed on the same 64-bit machine?
  A. Yes.

  Can Q: I build a 32-bit version of an executable file for the 64-bit LabVIEW application builder?
  A. currently isn't an option to create a 32-bit version of an executable file from the 64-bit LabVIEW application builder.

• Favor to ask: you can open this labview 2009 Vi and save it for me in a readable Labview 8.6 vi?

  Hi guys,.

  I have a favor to ask: can someone would be kind enough to open this Labview 2009 VI and save it in a VI readable Labview 8.6? You are likely a cause of missing blocks I use special but I don't want to have to redo all the VI.

  Thank you very much

  G.

  You can go there. None of the sub VI was attached, so they do not get converted.

• LabView 2009 Web server crash

  Hi all!

  Here's a simple VI containing any control, functions or library in LabView 2009 f3.

  

  Web server settings are default. After the tools-> operation of another PC Web publishing tool we are connecting to this Panel (IE6 for example) and put a finger to the F5 not lifting.

  Web page with the VI is very refreshing.

  There are 3 results.

  1. in DevEnv: LabView die.

  2. in DevEnv: need to restart LabView for charging Web server and restore connection.

  3. in App.exe: die

  4. in App.exe: LabView interpreter loose some time-cycles in the cases where they exist, but connection stored.

  5. in App.exe: but lost connection application work.

  Is this normal? Are there settings in Web server to avoid this situation.

  
  

• remote panel

  Hello

  I have a server and two clients connected to the server through remote façade. I want to reduce the waiting time to the order of a customer to another. I changed the "time limit command" field in web server under Labview options. When a client request time-out control starts correctly (I see the situation since the remote control panel Connection Manager) but when he finished 1: contdown restarts it. The same problem is described in this http://forums.ni.com/t5/LabVIEW/Remote-Panel-Connection-timeout-problem/td-p/405544discussion, but actually I'm with Labview 15.0f2. Any suggestions?

  Thank you

  Gimondi Alex

  In the end I managed to handle the problem.

  Play with the nodes of property I noticed that control release property do not work with the VI in a project if a customer has control, indeed the property work if the server has the control. Fortunately, lock control property works on the side of client (giving property the control on the server).

  With the Vi simple attached, I look at if a client has requested control and in this case, the server hangs and unlock the control so the customer waiting eventualy receive control.

  Hope this can help someone!