remote users access site ipsec tunnel
How to configure the ACL and the road to allow remote users access to site ipsec as local users?
Current scenario is
1. distance users (192.168.2.0/24) ipsec <->Cisco 870 (192.168.0.0/24)
(2 cisco 870(192.168.0.0/24) ipsec tunnel <->cisco 1811 (10.0.0.0/24)
Now remote users can access the 192.168.0.0 network, no problem, but how they can access 10.0.0.0 network?
I guess I can do like this:
1. in cisco 870, site to site ip 192.168.0.0 tunnel allow 0.0.0.255 10.0.0.0 0.0.0.255
(add) permit ip 192.168.2.0 0.0.0.255 10.0.0.0 0.0.0.255
2. in the site-to-site vpn cisco 1811
(add) permit ip 10.0.0.0 0.0.0.255 192.168.2.0 0.0.0.255
3. in settings vpn split cisco870 add the 10.0.0.0/24 network
Is this fair?
Thank you.
You must configure the interesting traffic that an ACL contains the source is remote destination as local LAN and LAN.
->->
Tags: Cisco Security
Similar Questions
-
Site to Site IPSEC tunnel (5505 at 5505) blocking certain ports?
I have problems with the traffic between two connected 5505 at 5505 sites (lan to lan) ipsec tunnel. feature of 99% of the traffic on the tunnel seems good with one exception. When a pc on Site A tries to access a mangagment base tool (java embedded) web for an IP_PBX to the site B, part of the traffic does not result in an odd error. The client pc can ping and hit port 80 to prompt the web GUI, gets invited to download java and load the java web application embedded. The java application itself (a terminal CLI to replicate if you were just Telnet to) gives an error as it cannot successfully connect to the IP_PBX. We have other sites where the ipsec tunnel is between two 2800's, and there is NO problem. The provider IP_PBX suggest that we open port 2000. Personally I'm not familiar with the ASA to uderstand why he would block only certain ports on an ipsec tunnel. I'm particularly confused because there is no NAT'ing involved in trafficking through this tunnel ipsec 5505 to 5505.
Any suggestions would be greatly appreciated,
BH
I can post configs if necessary, but thought someone might be already familiar with this issue.
Thanks again.
Ok.
What is stable with the ACL I mentioned:
test2000 list access permitted tcp/udp any host x.x.x.x eq 2000
test2000 ip access list allow a whole
Access-group interface inside test2000
The idea is to check if the ASA transfers traffic x.x.x.x on port 2000 coming out to the inside network.
If you see hitcounts on the first statement, the ASA transfers the packets and the problem is maybe with the server itelf or return circulation.
Federico.
-
VPN site to site - IPSEC TUNNEL
I have 2 servers that communicate with each other, using a middleware which has no NAT support.
This middleware, named RTI DDS uses multicast packets.
I need to place the 2 servers in 2 different cities.
On each location, I have a router connected to the other end with a dedicated line.
The version of the IOS on the cisco routers is ADVANCED (the one with the cryptographic features)
The middleware using NAT (which cache servers IP address) cannot work.
A VPN between my two sites can solve my problems of communication?
If so, I'll show what I did (maybe I did something wrong in the creation of VPN).
Because I am tring to create a VPN with an IPSEC TUNNEL
Thank you.
Emanuele
Emanuele
The first several times I have lived these configs I was concentrating on the ISAKMP and IPSec - aspects and did not find a problem with them. Then after you posted my answer I went through the congfigs once again, and I think I see the problem. There is no routing information in the configs. If Site_Router does not know where 172.27.1.0/24. When the server on its local network attempts to ping the server else she has no way to transfer the package. And the same CO_Router don't know how to get to 172.27.2.0.
If solve you the problem with the routing information, I think that the ISAKMP negotiation can work.
HTH
Rick
-
Model Lifecam HD 5000 bought a few days before Christmas, so it has been used for a few days.
Hello
1. do you have the question start the day you started to use this webcam?
2. How are you sure that the webcam is enabled automatically without asking confirmation?
Please answer above mentioned issues and provide more specific information on the issue, this could help us help you better.
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Refuse the remote user VPN to access PC using VPN from Site users to partner Site
Hi Experts,
Installation program:
We have configured IPSEC Site - Site VPN between Cisco ASA 5510 and Sonicwall.
Tunnel is in place and working well, we are able to access the remote workstation to partner and Vis Versa.
Requirment: We want to deny remote VPN users, who are our partners access to the workstation.
Example:
Remote IP address range: 192.168.200.x/2r4
Local IP address range: 192.168.10.x/24
Deny traffic from 192.168.200.x/24 to 192.168.10.x/24
Thanks in advance
Kiran Kumar CH
Hi Kiran,
You want to deny certain IP addresses of the Remote LAN (of the L2L tunnel), to connect to your workstation?
Thus, if the remote network 192.168.200.0/24, want to deny some of these machines to connect to 192.168.10.x?
If this is the case, you can create ACL VPN (VPN filters) on the SAA to restrictive traffic through the tunnel from the IPs.
Please clarify if I have misunderstood.
Federico.
-
Crossed between the remote access client to a remote site at a Site in Tunnel
Here's the scenario: users access remote vpn in ASA5510 with the tunneling split. The ASA has a tunnel from one site to another site. Vpn remote access users must be able to come and then go back devices on this tunnel from site to site. Is it still possible? Most of what I see on crossed is internet access when not to use the tunneling split.
Thank you!
You can do this job. First of all, you should make sure that the command "permit same-security-traffic intra-interface" is configured. You will then want to update your remote access ACL to include accessible subnets via the split tunneling L2L tunnel. In this way, customers will receive a static route routing traffic through the tunnel for remote access. The ACL crypto for the L2L tunnel shall include either a specific or analytical entry to the pool of the VPN client to destination subnets. The corresponding crypto ACL on the far side of the tunnel L2L will need to be updated with a mirror reverse configuration of hub. Finally, if you have configured on the NAT ASA, you will need to include a rule of exemption for the pool of VPN client-> remote subnet traffic flow.
-
external access through ipsec site-to-site tunnel
Hi all
I configured n/b site VPN ipsec Cisco ASA5510 router (site1) and router sonicwall (site2). I can access two LAN subnets.
But what I need is, routing traffic from site2 to a public ip specific to ipsec tunnel and then to internet through router cisco.
I updated the IPSec in sonicwall, so that traffic to this ip address will be routed to ipsec and all other traffic will go through the default gateway (sonicwall).
Then, I watched the packets on ASA5510 router Cisco ASDM and found that the packets intended for that particular ip address reached router cisco.
But still I can't access that intellectual property of site2. I think there must be some rules to allow that IP. And also I do not know it is possible to
access to the internet through the ipsec tunnel. ? I searched a lot and could not find useful advice. And I don't want all internet traffic to ipsec.
Thank you
Hans
It is what some similar to the only difference in the example below, it is the clients vpn access must be provided for users, but in your EAC, internet access is for some ip of an asite at the tunnel site
you will be interested in cross section
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
to give a brief idea
NAT (outside) 1
Global 1 interface (outside)
permit same-security-traffic intra interface
-
Internet access from the default remote gateway? NO SPLIT TUNNELING
I am facing a problem for a long time, I have an ASA5505 I went through a lot of config and research until I got the inside interface to be able to go to the internet; However my VPN clients are unable to go to the Internet. Now, here's the network config:
-J' have a router (which is a modem and a router and an AP) 3 in 1... This router is connected to the ISP with a coaxial cable. the Interior is 192.168.0.0/24 network.
-L'ASA is connected to rotate inside the network of its ' outside the interface.
-L' SAA within the 192.168.1.0/24 network is a configured static gateway already (which is the router)
outside the int > default gateway 192.168.0.1 (which is the internal IP address of the router). -Inside the ASA computers are able to connect to Web sites (but I can't do anything outside the network of CMD PING)!
-When a VPN cleint to connect using IPsec (without certificate) by using a Cisco VPN client software, the client can ping and do the remote desktop connection with computers on the same within the network (192.168.1.0/24) but can not pass the Internet even know that other computers on the network can go to the internet.
-One of the computers on the network (the inside network) is a DC server 2008 R2 which can go to the internet, as I mentioned above.
What I'm trying to do is have the VPN clients to be able to go to the internet with the help of which the ASA inside the NETWORK card as a default gateway (192.168.1.1), I already have the VPN configuration with the name of the group, preshared key, user name and password and without the split tunneling (which is what I want)
Thank you
Hello
The most common problem by getting ICMP to work through the ASA failed ACL or the ICMP Inspection rules.
Check your configurations of current ' policy-map ' on the SAA with the command
See the race policy-map
I assume you have the default configurations 'policy-map' on the SAA, that are attached to the global
Under ' policy-map ' configurations, you should see several 'inspect' commands. Pass under the correct configuration mode (where the current commands are found) and add the following
inspect the icmp
inspect the icmp error
Then retest the ICMP through firewall.
In regards to the VPN Internet traffic, we would need to know the level of Software ASA which you can check with the command 'show version'
You must first verify that you have this command
permit same-security-traffic intra-interface
This will allow the traffic to the VPN users access the interface ' outside ' of the ASA, get PATed and then leave again through the ' outside ' interface. Without the command above it will not work. Will never go the VPN Internet user traffic through the interface "inside" of your ASA.
Then, you will also need the dynamic configuration PAT for your VPN users, so they are translated at the same IP address that users of LAN behind the ASA. This format of configuration depends on the software level, that I mentioned above
On a SAA running 8.2 (or below) you would usually have this configuration
Global 1 interface (outside)
nat (inside) 1 0.0.0.0 0.0.0.0 (or the mentioned specifically LAN)
To activate the dynamic PAT for VPN users that you would add
NAT (outside) 1
On one ASA 8.3 running (and above) you can configure the dynamic PAT for users of VPN in the following way
network of the VPN-PAT object
subnet
dynamic NAT interface (outdoors, outdoor)
It should be. Of course, you could have a configuration that may replace it, but I doubt it.
Hope this helps
-Jouni
-
Tunnel VPN remote Internet and VPN remote VPN from Site to Site traffic?
Hello
We try to remote traffic from our users VPN tunnel through our ASA 5510 as well as to allow the only access for remote user VPN traffic to the other end of the all our VPN site-to-site connected to the same ASA. Basically, we who want to VPN in the network in order to access all of our networks business. We try to get away with this without using split Tunneling.
I can currently get internal traffic from the remote user VPN to reach all other vpn site-to-site tunnels without the internet in tunnel. The problem is when I add the following statement to the NAT:
NAT (outside) 1 10.10.19.0 255.255.255.0 * 10.10.19.0 is the address of the remote VPN Client
Internet traffic to the remote VPN starts to get in the tunnel, but I lose the opportunity to reach one of the other tunnels from site to site by the remote VPN tunnel.
I also begin to receive the following errors in the journal of the ASA
3 July 1, 2009 12:34:18 305005 10.10.19.255 137 no group of translation not found for udp src outside:10.10.19.3/137 dst outside:10.10.19.255/137
Any help with how NAT statements must be defined for this work would be appreciated.
Thank you
Will be
Will,
the link of this post for your scenario of vpn hub & speak reference, you problem may be on exempt nat rules.
Have a second look at your sheep rules.
Be sure to eliminate tunnel rules related to rheumatoid arthritis, as appropriate, to not let him get in the way of splitting.
If always emits discribe topology for l2ls and info logic RA and sanatized hub config asa... but I think if you look at the thread above, you should be able to solve.
Concerning
-
ASA ASA from Site to Site VPN IPSec Tunnel
Any help would be greatly appreciated...
I have two devices Cisco ASA with a Site for the configuration of the tunnel VPN IPSec Site as follows: -.
Site #1 - Cisco ASA running version 8.2 (1) with an internal range of 10.0.0.x/24
Site #2 - Cisco ASA running version 8.2 (1) with an internal range of 10.1.1.x/24
Site #1 is simple and has a dynamic NAT rule which translates all of the inside and the outside (public IP) of the SAA.
Internet access works very well in all workstations of this site. A static route is configured to redirect all traffic to a public router upstream.
Site #2 is slightly more complicated; the Cisco ASA is configured with 10.1.1.254/24 as its interior IP address and 10.1.2.254/24 as its external IP address. A dynamic NAT rule is configured to translate everything inside as the 10.1.2.254 (outside) address of the ASA. A default static route is then configured to redirect all traffic to a Draytek device on 10.1.2.253. This device then performs its own private Public NAT. Again the Internet works fine all hosts inside the Cisco ASA (10.1.1.x)
The IPSec tunnel is created with the networks local and remote endpoint as above (10.0.0.x/24) and (10.1.1.x/24). The Draytek at the Site #2 device is configured with a form of DMZ that allows essentially ALL traffic toward the front directly on the external interface of the ASA (10.1.2.254). The Phase 1 and Phase 2 negotiation of the tunnel ends correctly, and the tunnel is formed without any problem. However, all traffic passing on networks ICMP does not end and the Syslog reports the following-
Site #1-
6 January 19, 2011 15:27:21 302020 ZEFF-SB-01_LAN 1 10.1.1.51 0 Built of outbound ICMP connection for faddr 10.1.1.51/0 gaddr ZEFF-SB-01_LAN/1 laddr ZEFF-SB-01_LAN/1 6 January 19, 2011 15:27:23 302021 10.1.1.51 0 ZEFF-SB-01_LAN 1 Connection of ICMP disassembly for faddr 10.1.1.51/0 gaddr ZEFF-SB-01_LAN/1 laddr ZEFF-SB-01_LAN/1 Site #2-
6 January 19, 2011 15:24:47 302020 10.1.1.51 0 10.0.0.30 1 Built of outbound ICMP connection for faddr gaddr laddr 10.1.1.51/0 10.1.1.51/0 10.0.0.30/1 6 January 19, 2011 15:24:49 302021 10.0.0.30 1 10.1.1.51 0 Connection of disassembly for faddr gaddr laddr 10.1.1.51/0 10.1.1.51/0 10.0.0.30/1 ICMP It's the same for any form of traffic passing over the tunnel. The ACL is configured to allow segments of LAN out to any destination. At this point, I left scratching my head, as my original theory was to blame the Draytek, but after reading the documentation given to the DMZ host configuration, it appears this parameter is configured all traffic is simply forwarded to the IP address (in this case, the Cisco ASA interface outside).
Anyone can shed light on a possible cause of this problem?
Thank you
Nick
did you bypass the vpn traffic between 10.0.0 and 10.1.1 to be NAT - ed on the two ASA?
Please provide the following information
-set up the tunnel
-show the isa cry his
-show the ipsec cry his
-ping of the site 1 site 2 via tunnel
-capture "crypto ipsec to show his" once again
-ping from site 2 to 1 by the tunnel of the site
-capture "crypto ipsec to show his" once again
-two ASA configuration.
-
Blocks VIRTUAL local network access to a tunnel VPN IPSec on WRV200?
I have two identical WRV200 wireless routers which are connected by a VPN IPSec tunnel. This goes to my LAN LAN of my parents. Everything works well.
But I also have my WRV200 configured for two VLANS. Vlan1 for my network and secure wireless access. VLAN2 for a WiFi not secure for customers.
My problem is that my guest on VLAN2 slips through the VPN devices and access on LAN of my parents. I'm looking for a way to block to do this.
I use the version of the software on the two routers (v1.0.39).
For what it's worth, I know that my receive an IP address in the range 192.168.x.101 DHCP - 199. I could assign a different range if that helps. I thought that I could block this beach on the remote router firewall, but I see there is blocking a single IP address at the time, maximum of 8. Am I missing something?
Or could I put something weird in the routing tables somewhere to get the IPs guest out of lala land?
Any suggestions are appreciated. I can't be the only one in this boat.
Steve
Try to check local and remote, vpn under safe group settings if you change the ip address range subnet. Don't include the range of ip addresses of the computers wireless comments so that it will not pass through the vpn tunnel. If there is no ip range option, you must to the subnet of the network in order to control the ip address you want to allow on the vpn tunnel.
-
Access-list group policy and IPSec tunnel.
I have an IPSec Site to Site VPN tunnel that ends on the external interface of the firewall. My ftp server is located in a demilitarized zone. The DMZ has an access list applied to the interface. When I created the Group of the tunnel for the Site to Site, I create a group of tunnel with group policy and manage the policy with filters. The filter looks like an access list. Are the filter and the ACL interface work together? The one replace the other? How they work together.
Once traffic ipsec, acl interface is not used until you have enabled "sysopt conn allowed-/ ipsec vpn. When you add a vpn-filter, it is what will filter the ipsec traffic.
-
IPSec VPN (remote VPN access) - dynamic NAT
Hello dear group
I like ASA 5510 is configured for remote access VPN, ASA authenticates Clients remoter with Radius Server (accounting software) and will be assigned an address IP of VPN-pool (172.16.20.0/24). Prose all in use of authentication with radius server is successful, but there is no any Internet browsing on the client side. I've set up a dynamic NAT rule on the external interface of SAA, I write in the following:
Interface: outside
Source: VPN-users object (address pool 172.16.20.0/24)
The translation of the output interface.
the NAT rule to above does not. (I think that traffic is not clothed with VPN POOL address via external interface)
Note: this VPN users access the INTERNET only. (because of this, the pool address range is different with inside the Network Interface)
Its a favor if you help me how NAT.
Thank you
Best regards
Hello
Would really need to see your current NAT configurations to the CLI format to determine the problem.
Naturally, the problem could be as simple as missing the following command on the SAA
permit same-security-traffic intra-interface
This command is required on the SAA for traffic to come through an interface and let the same interface. In your case this interface would be "Outside" the customer VPN traffic arrives at the ASA via this interface what is leaving through this interface to the Internet.
-Jouni
-
Can I use private as Source IPs from a remote network IP addresses while building the IPSec tunnel? If not why? If so, how?
Your explanation is much appreciated.
Hi Deepak,
In such a situation, you usually NAT traffic that goes to the internet, but exempt traffic that goes through the VPN, because it will be wrapped in packages with public IP (tunnel) addresses. You can use the same IP address on your interface in the face of internet for the NAT/PAT and source of IPSEC Tunnel.
Maybe you are looking for
-
How much time must be recharged Satellite Pro U200-10 b for the first time
Hello How long the computer laptop Saturday Pro U200-10 b should there be for the first time? Kind regardsCC
-
Problems with the part of the family.
Tried to add children to the family. Someone was having trouble validating their credit or debit card?
-
Get the hard drive just for my laptop DM1
Hi, I need to buy a replacement for the hard drive to my laptop 4341sa DM1. On the system, I found the model like a Hitachi HTS543232A7A384 number. I looked on http://www.shopmania.co.uk/hard-drives/p-hitachi-hts543232a7a384-41617984 and I'm wrong in
-
I get an error message (80070005) when download windows updates.
I get an error message (80070005) when download windows updates. This laptop is only 6 months old. I tried everything I know to do. Please help if anyone know what I should do to fix this problem.
-
Windows 7 has stopped updating the error Code 80070539
I just installed Windows 7 Ultimate Upgrade (from Vista) and while there are about 20 updates installed, I have come to a block with the Windows update code 80070539 encountered a error an unknown error. It was suggested to check that all my drivers