Remote web panel Embedded Software Evaluation Kit LV8.6

Similar Questions

• Remote front panel in Tablet

  Hi all

  I am trying to establish a remote connection of frontage on a windows 8 OS 32 bit on 64 bit Tablet atom processor since an exe file deployed to myRIO. I had checked the remote façade on the development of PC connectivity (windows 8 OS 64-bit processor i7), installed the LV RT 2013 engine and the 32-bit drivers on the tablet. The problem is the remote connection of façade hangs after some time. I connect the target to a type B USB which is connected to an OTG cable and then to tablet microUSB port.

  1. I reduced the data rate to about 200 samples per second (20 display values on a chart by 0.1 seconds), the problem still persists

  2. the remote panel works pretty well when it is connected to the development PC and another PC (windows 8, OS 64-bit with LV RT 2013 installed) via USB, it's just the tablet that loses connection after some time (it says connection refused by the server control panel)

  3. I have connected the target to an active local network the WiFi on the shelf and got the remote control works perfectly. It is just the physical USB connection to the tablet with an OTG cable that creates the problem after a while

  I came to the conclusion that the problem could be with the 32-bit drivers (the screen gets stuck after some time however), OTG cable (I tried another one) or that the Tablet is running on 32 bit OS. I even installed LV 2013 on the Tablet, developed a test exe and tried remote front panel, still the same problem persists. All entries for what could be the problem?

  Thank you

  Arya

  
  

• publication order, config to access local server remote-web

  Al hilo mi otro post http://forums.ni.com/t5/LabVIEW/sin-acceso-a-control-remoto-web-publishing/m-p/1497856/highlight/tru... are solved, tengo otro problemilla:

  I have a server local integrated con varios hence donde to banish una scada application runs. Can not get access a control remote, any red ordenador desde (tras varios question fallidos, to consiguio asignandole has the IPv4 cada red useful, the fija del servidor DNS config).

  Well, then be brought desde una conexion externa, claro, pero no con fija the DNS no access or internet tengo acceso al servidor, por direccion http... remote web-publising created por the tool tool. Aunque seguimos investigando, local administrator el y yo creo as cerca, pero momento estamos no hemos dado con the respond.

  What creeis can faltar a mi config, tanto local como labview_v8.5 del servidor del?

  MUCHAS gracias Jorge, por information.

  Todo lo Québec is explica in el link are be habia probado una u otra forma.

  The main problem, I think that is what el servidor is una IP fija, puesto that companies should pay al proovedor telephone what wear ahora esta mas. Además, de dejar el servidor por temas seguridad tal y como esta.

  Logicamente no mi depende, pero to thanks the ayuda.

  No however, TR alguna alternativa en funcion of lo conoces what ha en el Haddad post, comentalo.

  Saludos.

• Remote Web access is disabled

  I asked for the ssl certificate I want to host field to my server in the window, but when I try to access the IP in the browser, it displays the error that access remote Web is on official assistance on how I can host and remove this error!...

  I use Windows server 2012

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Remote Web Workplace - VBScript: Remote Desktop disconnected

  Using Small Business Server 2003 (SBS 2003 SP1 Premium).  The Remote Web Workplace Remote Desktop connection has worked for years.  We apply Microsoft Updates to the server last week and since that time, we get a message telling VBScript: Remote Desktop Disconnected - the client could not connect to the remote computer.

  We have verified that no other changes were made in the environment since the last time that this feature was working.  We looked on the web and on the Microsoft site, and none of the usual causes of this question seems to apply.  Other features SBS seems to operate normally.

  We are looking for additional troubleshooting steps, we can take.

  Thank you.

  Hello JohnM781,

  Thank you for your message.  Please submit your question to experts in the Small Business Server forum in TechNet.

  See you soon

• Remote Web Workplace 2011 connected to the remote PC lot

  I have a client who is having a strange question about Remote Web Workplace 2011.

  It will connect to RWW that herself as usual, but when it connects to the remote computer, I'll call him PC1, it connects to a different machine (PC2).

  I have logged on to the SBS server and made sure his remote PCs are configured correctly, she only has permissions for remote access to PC1, all other PCs have been disabled for the remote access.

  There were no changes made to the names of PC or anything.

  The server is a Windows Small Business Server 2011 Standard.

  If I have excluded any information please let me know! Any help/ideas would be greatly appreciated!

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Update downloads but won't install-uninstall software wrong Kit.

  Windows downloads the updates, but there is one that install downloads but wont... Windows Malicious Software Removal Kit.

  If anyone has an idea why this is happening, please tell me how to fix it!  Thank you very much!

  Go here: http://www.microsoft.com/security/malwareremove/default.aspx

  Download and install directly.

  Doc

  Computers verified since 1972

• Huh? "Remote Control Panel" came with the update of the firmware, LaserJet P4014n

  I have 3 Laserjet P4014n recently updated to firmware 20140127 04.210.5.  If I use EWS log in as local administrator I see there's a new entry on the tab named "Remote Control Panel. I'd love to see what he does, but I can't.

  With the help of IE11, I click on 'Remote Control Panel' and receive a alert 'ActiveX settings are required to use the remote control panel. There is an 'OK' button below this alert. By clicking on the button 'OK' makes me a "sorry, unsupported browser.

  I fooled with my settings ActiveX IE11 and not got anywhere. The documentation for the update of the firmware is vague.

  Can someone tell me what is this new feature of 'Remote Control Panel' intrigueing?

  Answering my own question:

  A couple firmware updates, this EWS feature has been removed from my P4014n printers but added to my printers LaserJet Enterprise M601n.

  I dropped the past months trying to understand what he's doing since clicking on it never did much. But today, I accidently clicked on 'Remote Control Panel' and got a double chart of the front of the printer with all the buttons (OK, up/down arrows, red X, home, back and a numeric keypad). There is also an option "restart".

  It's very cool like SAP M601n does not in any way to simply cancel a job stuck in the queue. I was remotely restart the printer.

• Remote Web Workplace and remote printing

  At home, I have a laptop Win7 and a new printer HP Officejet Pro 8620.  I use Remote Web Workplace to connect to my Win7 desktop at the office (both are 64-bit).  I installed printer drivers 8620 on the desktop PC.

  I connected to the desktop through RWW.  The desktop PC sees my 8620 home printer and says "redirect".  I print a test page and open the printer to "see what is printing", I see the print queue, then print, then went in the window as if it is done.  But she is never actually prints.  My home printer doesn't even look like he gets no data from RWW.

  I already had a HP Officejet printer model connected successfully.  And, more recently, used a Lexmark Pro915.  I need to replace the Lexmark.

  After trying the 8620 without success, I reconnected it the Lexmark and it works fine.

  Help, please!

  Hello

  Please contact Microsoft Community.

  That your problem is limited to print remotely using the printer HP Officejet Pro 8620. I suggest you post your query in the TechNet forums to get help.

  Check out the TechNet Forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Please contact us if you need additional help with your windows, we will be happy to help you.

  Thank you.

• How to download Windows XP embedded software 2007 fb?

  How to download Windows XP embedded software 2007 fb?

  Hi, Rajnikanth,

  Are you looking for downloader fb?

  http://www.freeze.com/download/social-networking/FB-Downloader

  Check this site for the software.  Type the name in the search box to find software on the left.

  http://download.CNET.com/Windows/?tag=HDR;brandnav

  If you want to download, press the download button

  A window will appear and you can select Save or run

  If you want to save the file, find the drop-down arrow and select Save as

  A window opens and you can select the folder you want to save on

  Note the location that you save it to for more information

• Abstract WSDL for the remote Web (outside of the SOA platform) service?

  Hello

  I use a remote Web service which is based WSDL. I noticed in our development environment that when the server restarts if remote WSDL endpoint is not available, my composite goes into invalid state, even if the actual WSDL file is located in the project.

  I use MDS to another inter composite dependencies, but this service is outside of the SOA platform, so how can I create an abstract WSDL and use it via MDS to avoid invalid state?

  Currently I have the WSDL of localized real distance and a wrapper WSDL generated external Web service framework.

  Thank you.

  Hello

  If the wsdl file has been copied to the project, it shouldn't go invalid, check if there are imports in the wsdl file that may be pointing to remote, as sites of patterns... You will need to locate those as well...

  See you soon,.

  Vlad

• CSR SSL Cert for remote Web Workplace

  Customer shall execute a certificate SSL for Remote Web Workplace and asked me for the Certificate Signing Request (CSR) information for the domain. I searched help and knowledge that they can't run their own SSL and now you're wondering how to move forward?

  T Hey I need to use Remote Web Workplace, which runs on a sub domain

  Looking for an answer on how my client can use their position of remote Web Workplace and have their site hosted on BC?

  Remote Web Workplace is a feature of Microsoft Windows Small Business Server and Windows Home Server 2011 medium-sized product company, Windows Essential Business Server, that allows existing users to log into a network front face of the small Server Edition-Professional family interface-based.
  
  After logging in to Remote Web Workplace (using their Windows domain user name and password used), a user can access enabled features of the Small Business Server or Essential Business Server, such as Outlook Web App, the viewing of SharePoint pages and (if a machine is running and allows him to) full remote control of client computers connected to the network to the server.

  Off-site access
  Remote Web Workplace is a feature of Windows Small Business Server, Windows Home Server 2011 and Windows Essential Business Server that allows access to users to facilities when they are offsite such as email, reading/modifying shared calendars and remote controlling a machine as if they are sitting in front of IT.
  
  Connection options
  When you connect to Remote Web Workplace, users can choose their connection speed which then optimizes the characteristics of the connection. The options are: Small Business Network (Intranet), broadband, modem of 56 Kbps and 28 Kbps Modem.
  
  Means of access
  The Remote Web Workplace is a Web application and is accessed through a web browser. To control remote computers, a user is required to install a "ActiveX desktop remote control" in its web browser once and only Internet Explorer is supported.

  
  

  Please and thank you!

  Short answer (to date) you can not SSL certs on BC... so you can't generate CSR

• Is it possible to export the Muse site in Dreamweaver or in another format like wordpress, now all hyperlinks and blogs, where 10 years later there is no Muse, but another web Adobe made software?

  Is it possible to export the Muse site in Dreamweaver or in another format like wordpress, now all hyperlinks and blogs, where 10 years later there is no Muse, but another web Adobe made software?

  Hi Claire,

  First of all, you can be assured that now Adobe has no intention to quit muse and it's here to stay

  Now then, you can export your site created in Muse in his code HTML, CSS and JS form by using the file option-> export to HTML

  Please refer to this screenshot:- http://prntscr.com/4ueqvq

  Now this version exported your muse site can be opened in any code editing software like Dreamweaver etc and you can make changes to your site.

  Hope this helps

  Kind regards

  Rohit Nair

• inspect the remote web iOS hangs on dps.store.getPreviewImage

  How do you deal with remote web inspect hangs on the breakpoint but js code appears as spinnging wheel?

  I'm trying to understand why my picture is not displayed, but everytime when I try to remote debug the code JS it crashes... I can see the stacktrace left of safari's web Inspector, but not the code JS.

  Any benchmark?

  var productID = "com.example.dpscustomstroefront";          

  for (folio in foliodata)           {               

  var folioID = "folio-"+foliodata[folio].id;                 

  var folioDiv = document.createElement("div");                 

  folioDiv.setAttribute("id", folioID);                 

  $("#folio-target").append(folioDiv);               

  var imgElement = $('');                    

  imgElement.attr('class','withStyle');               

  // imgElement.attr('width',300);               

  if(foliodata[folio])                {                    

  adobe.dps.store.getPreviewImage(productID, false, 1024, 768, function(data) {                         

  var result = data && data.result;                         

  if(result == "succeeded") {                              

  imgElement.attr('src', data.path);                          }

  else {                              

  // console.log("An error occurred");                          }                    

  });                                                     

  var folioElement = $("#'"+ folioID + "'");                    

  folioElement.append(imgElement);               

  }                

  }

  For showcase custom problems, I suggest calling Gold support. You can find at http://digitalpublishing.acrobat.com/, in the Middle at the bottom of the page.

  Neil

• LV2010 and cFP-2120 and remote control panel

  I have a project in LV2010 to the cFP-2220.  When I convert the project to a PSC-2120, the remote control does not work.  When the browser passes to the default IP of 192.168.1.2/#Home.

  Thanks for your help.  We were able to install and access the web page for the remote control.  We have formatted the C drive, installed FP 6.0.11, deployed program, created a new web page, and replaced the default index file OR.  Replace the default index file continues to be a problem and required several web page refresh (Windows 7 same with the option to auto update on and firewall disabled).  A lot of work related to the compatibility and updates to OS and software.