Remote weblogic deployment by using the wldeploy task-related question

Similar Questions

• FireFox opens a lot of tabs on its own. I can't do something, but to close it using the windows Task Manager. all this occur after installing the add-on flashgot. (I've used this module before and it was working OK)

  I use Firefox for two years now and use the flashgot. and I really like it.
  This laptop has firefox on it since the first day. and I got flashgot on this as well. But today when I tried to download something that I have that option (save the file) flashgot wasn't there. I was a little surprised but downloaded and installed flashgot anyway. He asked me to restart firefox and I let him. then when it restarted I had a lot of pop windows asking me which application is used to open this link (it wasn't a link and I got only firefox so I picked it up) was windows 10 or more pop so I chose to use this option for all. When I did so all of a sudden got a lot of poping up tabs, then a new window pop Firefox on with a lot of poping up tabs and then a new window. i've got up to 19 poping windows with lots of tabs. I had to close it with the Task Manager.

  now when I want to use firefox about 20 tablets pop up then a new window Firefox pop up, and then when I type a url another 20 tablets pop then a window pop...

  This laptop may have problems. am scaning now using an ESET online scanner to see what is happening.
  Thank you for your help in advance

  Create a new profile as a test to see if your profile is the source of the problems.
  
  See basic troubleshooting: a new profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins»

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Deploy and use the shared library in VeriStand for several VCD

  Hello world

  I'm using LabVIEW 2011 SP1 and VeriStand 2011 SP1.

  We have developed many custom features that use a shared code (C++ and LabVIEW code).

  For now, there is a copy of the C++ shared in each custom device dll.

  The problem is when we change the C++ dll and we forget to copy a new one to each custom devices, the oldest one that can be used by each custom devices.

  We would like to do is not to have only a single dll shared in a specific folder.

  My questions are how we can deploy this dll to a specific shared folder in VeriStand?

  Is there a specific folder that we can use to do this?

  Is it possible to deploy using the measurement and Automation Explorer?

  If someone has an idea, you are welcome!

  Best regards

  CFOE

  You can display this question in another forum that I don't think there's anything directly to do with NI VeriStand.

• Question using the human task item

  Hello

  I have a problem with the human task. When I try to drag and drop a component in my composite.xml or my BPEL human task, I have this error:

  ERROR: Exception ClassNotFoundException for oracle.tip.tools.ide.workflow.sca.WorkflowSCAComponent

  java.lang.ClassNotFoundException: ERROR: ClassNotFoundException for oracle.tip.tools.ide.workflow.sca.WorkflowSCAComponent

  at oracle.tip.tools.ide.fabric.resource.SCAComponentRegistry.getSCAComponentInstance(SCAComponentRegistry.java:235)

  at oracle.tip.tools.ide.fabric.gui.controller.ActionComponentEdit.add(ActionComponentEdit.java:101)

  at oracle.tip.tools.ide.fabric.gui.controller.ActionComponentEdit.process(ActionComponentEdit.java:78)

  Can you help me please? I have not found anything!

  I'm on Win 7 and Jdeveloper 11.1.1.6.0.

  Thank you.

  Hello

  I finally found the solution, check that the SDM is correctly configured in your adf - config.Xml.

  Something like this:

  Kind regards

  Mustapha

• How to use the scheduled tasks in Windows Vista Home Premium 64-bit?

  We bought a new computer with Windows Vista, at our previous computer (Windows XP) planned to tasks in the control panel to stop future elements at the start of the system, how to keep the elements that it slows down my computer to come at the start of the system

  1. use Windows Defender to manage startup programs.

  2. http://netsquirrel.com/msconfig/msconfig_vista.html

  Read the above info.

  3 use this program:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  4. go into each program > tools > Options > see if you can disable the startup when Windows starts.

  See you soon.

  Mick Murphy - Microsoft partner

• Remote Desktop ceased operation using the enterprise 32-bit edition of Windows 7

  Hello

  Recently installed and configured Windows 7 Enterprise 32-bit on my laptop at home with great praise. Download and install all Windows updates. Currently connected to my home network with a wireless g Linksys router. I use AVG free anti-virus with firewall Windows is activated. I have a static connection to my internet and it set up locally on my machine. Port forwarding is enabled on the console of the router to open port 3389 on my static IP address. I am connected to a private network and you have configured the Windows Firewall to accept incoming connections to the RDP port on the only private networks (Public and domain are blocked by default). My remote desktop worked very well for about a week. No hardware or software changes on the laptop. I tried to connect a work day and the following error 'this computer cannot connect to the remote computer. Try to connect again. If the problem persists, contact your network administrator or the owner of the remote computer. »

  Since then, I have the router and modem power to bike. I double checked IP address external and my IP by pulling the gateway, which none have changed. No changes are made to the console of the router either. I ran the command netstat - n and port 3389 is no longer listening. I unlocked all inbound connections in Windows Firewall and disabled antivirus without success (I'm back since changes for security reasons) 3rd party. I am at a loss now to know where to check then. Has anyone else seen a similar question to mine with Windows 7 or any other OS?

  Thanks in advance for your time.

  Hi Kyle,.

  Try to clear your DNS cache and rebuild the TCP/IP stack by using commands.  Also try disabling IPv6 to see if it will help.

  netsh int ip reset c:\tcpiprebuild.log
  ipconfig/flushdns

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• JDeveloper PL/SQL WebService deployment to use the connection pool

  Hello
  
  JDeveloper/OAS 10.1.3.4
  
  We have generated Web Services based on package/procs of PL/SQL by using wizard. When we deploy, it generates a new pool of connections and the connection on the OAS. If change us the Web Service in JDev to use a connection Pool existing and redeployment, it always creates a new connection/connection pool.
  
  Change: oracle - webservices.xml, web.xml, and < ServiceName > base.java files
  
  Anyone know how to get around this without using WebServicesAssembler?
  
  Thank you

  When you deploy the server, don't include any local data sources. In JDeveloper:
  1. choose Tools > Preferences to display the Preferences dialog box.
  2. Select the deployment on the left side.
  3 uncheck data - sources.xml during deployment of default package.
  This can be changed later for other projects if you do not want to deploy the data source.
  Daren

• Use the camera on Android question

  Can I change the aspect screen in landscape mode make the camera worked?

  If yes how can I do that?

  Hi Benoitcn

  Can you give us the code that pursue you? Here is a link showing how to implement the camera using adobe air for Android:

  http://www.riagora.com/2010/07/Android-air-and-the-camera/

  http://www.unitedmindset.com/jonbcampos/2010/09/29/air-for-Android-camera-and-camera-roll/

  best regards Mike

• The hacked account-related questions

  I have an account in NASCAR & a message from the web page comes up & tells me that my account has been hacked.  I click on OK or a red X in the upper right corner of the message & goes on the site of pirates, I suppose.  I need to know what to do.  I can't go on my other browser on this p / & I don't seem to have any problems.

  What I did on secondary browser to this Web site has been to change my password.  I managed, but I can't always on my account on browser I.E. 9 without the hack message arise.  What could I do?

  Please reset your browser to factory settings.

  And then do a scan with Malwarebytes and Antivirus.

• The priority for the IKE policy-related questions.

  Guys we have Headoffice ASA connected to the ASA branch by site-to-site VPN tunnel. ASA has priority 11, 20 and 40 headquarters set up, while the branch has a priority of IKE defined only 50 and no default priority is visible under show run. Based on this information, establish the VPN tunnel between head office and branch?

  Blanchot,.

  When you talk about IKE Policy priorities, you see crypto isakmp policy of right?

  If this is the case, the number that allows you to identify who is locally important. It's important if you have crypto isakmp policy 1 on one side and isakmp crypto 5 on the other side, as a long-standing policy on each site and game settings (encryption, authentication, hash, Diffie-Hellman group, preshared key) your Phase 1 should appear.

  I hope this helps.

  Raga

• on the use of the global task

  Hello

  I've been using labview 7 for a long time and I haven't used task. Recently, I've introduced to CVI and I have created all the need for tasks at the launch of the application and reuse tasks before the end of the application. Last week, I received a copy of labview 2013 and I am porting the old code labview for 2013. However, I ran into a problem. Different compiled C code, this code vi must be run each time when necessary, if I create the task on the fly in the vi, it is quite heavy. I would like to create the global tasks so it could be used anywhere, anytime. The example contained in the regulations says that I could create these tasks in MAX. So my question is to use the task only did I specify the name of the task (created in MAX) as the IO channel to use?

  Furthermore, if I create a global task, do I have to delete the task at the end of the application? If I delete the task, global task disappears from the MAX or not?

  Finally, I wonder if it is possible for more than one vi using the same task in different times? For example, I created a global task for the analog output. I run two vi, A and B. A, he use the task to an analogue voltage output while B is something else. After that was done, B uses the same task for another exit. They come in conflict somewhat? What happens if both A and B call the same task at the same time?

  dragondriver wrote:
  

  ...

  Thanks for the clarification. So it doesn't work if I create two tasks the two links on the same channel and I call these two tasks at the same time, right?

  Time to dig the DAQmx help file and check in the DAQmx state transition table.

  Any number of tasks can be created (any reasonable number).

  If all this stuff is sane the task can be verified (if he calls nonexistent DAQmx hardware raises an error and the task cannot be verified)

  If all resources are available (clocks, roads, channels) can be "reserved" (committed) if something else has booked all the resources the task cannot be initiated and DAQmx generates an error.

  In order to have multiple tasks that use the same chanel is perfectly fine, BUT only one can be in one State other than "Verified" use control Task.vi to explicitly states the task of transition.

• Deploy and run the part of the project in real time RT

  I am developing a project, LabVIEW-RT, with a User Interface on the PC and evanescent code that runs on a PXI system.  I read a few posts discussing the possibility (or lack thereof) to start the RT of the project by program part.  Here's what I mean: my project has a first level VI on the host PC, call 'Host UI.vi', and a first level VI on the RT target, call it "target RT.vi".  There is the usual assortment of other features of the RT, such as flow, LAN and network Variables shared, etc.

  During development, I open the project, find the code RT target, select the target RT.vi and click Run.  I can do the same with the host UI.vi.  My code works (or not, depending on whether I have introduced new bugs).

  What I would like do is to run the host user interface and run the code to mimic an RT target selection in my project and perform a right-click.  I partly managed, but a small step escapes me.

  Can I programmatically deploy my RT code and make it pop a window front so I can click on the Start button.  I even managed to start running programmatically using VI server.  However, when I start it programmatically (rather than clicking Run), my shared network Variables are not available.

  I studied it a bit by using Distributed System Manager.  With her, I can 'see' my shared Variables of network on the target of the RT, but its status is offline.  I put online by clicking on the button 'Start process' in DSM, however, when I then try programmatically start my vi target RT using VI Server, Shared Ntwork variables goes Offline (accordint DSM).

  Question - is there a way to do a program equivalent to locate my network shared Variable in DSM and clicking on start processes?

  [I had a great idea while writing this post.]  I have noticed that if I deployed my VI and also expanded my network shared Variable, DSM has shown to be online, but the target RT start VI VI Server, the NSV went offline.  What happens if I have deployed it after from the remote?  Good idea, too bad that it didn't work...].

  All the best ideas?

  BS

  Well, I just did!  I wrote a demo project RT with the following characteristics: RT side consists of a single VI that affect False in a Boolean Variable (NSV) shared network, goes in a while loop until there is true, goes into an another wait loop to make it False, then ends.  The NSV is hosted in a library on the remote target.

  The host does the following:

  1. Determine the IP address of the target of the project.
  2. The first name of the VI RT to run, to return a reference to it.
  3. Use the reference to deploy the RT VI on the remote target.
  4. Use the IP address and the name of the RT VI for a VI Server reference.
  5. Use the reference to start the code that runs on the target of RT.
  6. Go in a loop looking at the NSV and wait for the status of the error not be 8BBB0006 (uninitialized NSV).
  7. With the value returned by the NSV (must be set to False, defined by the code of RT), deny it, set it and wait that it will change.
  8. Do this one more time to return the NSV to its original value (as defined by the code of RT).

  Before running the code, right-click on the target of RT in the project and turn on "disable AutoDeploy Variables.  J of Zach, an Applications Engineer of NOR, suggested that this step, which can be the key step in the resolution of this dilemma.

  To test this, I restarted my PC and the aim of RT.  Once both had restarted, I opened the project on the PC, and without interaction with the section the project somehow RT (including not not clicking 'Connect'), I ran the host code.  He started the remote code and was told that the round trip time for set and reset my NSV was about 29 msec.

  I intend to make a full text of this and submit the entire project, with documentation and all the screws under utility, I used, to community page OR.  I'll try to get this done this weekend...

  Bob Schor

• Java Bean works is not on server remote weblogic

  Hi all

  Let's all start, I use oracle 11 G R2, Oracle Weblogic Server 10.5 forms.

  My requirement:

  I need a custom form in my Oracle Application with which the user selects color

  My form:

  The custom form has a button and a JavaBean (ColorPicker) Area

  
  

  I use the Fbean package to register and call colorpicker as java bean

  
  

  My problem:

  The form runs successfully on my weblogic server locally (on my laptop), but when I run the same form on remote weblogic server and click the button to choose the color, nothing happens, and the dose of java console does not display an error

  I added colorpicker.jar to check tag in formsweb.cfg and put the colorpicker.jar in the OracleHome/forms/java directory.

  I tried the jar sign, but no solution

  Please help me

  the problem is now solved, the problem was in the browser to the URL

  the file formsweb.cfg on the remote application server containing sections of configuration multi like this:

  [TEST11G]

  ---------------

  [TEST11]

  ------------------

  [webutil]

  -------------

  etc...

  I was adding the colorpicker.jar to the tag of archive in the TEST11 section, while I am running the form using config TEST11G like this:

  http://aptest:8888/forms/frmservlet? config = test11g

  The problem is in the location of my jar file in the file formsweb.cfg

  Thank you very much.

• Error during deploy Homeless using veristand 2010 API

  Hello

  I developed a few screws to connect and download "in4" and it worked fine with VS 2009.

  Now I am migrating to VS 2010 and I got error-307658 when I try to connect for the second time.

  If I cancel the deployment by using the Project Explorer, I still had no error.

  I tried to undeploy using logout of the system, but I still get the same error.

  With VS 2009 it has been possible to deploy the Homeless several times without error, but it seems that the same is not allowed with VS 2010, is this good?

  I forgot something?

  I enclose the screws and the Homeless.

  See you soon,.

  Claudio H.

  If the status is active, this means that the connection between the gateway
  (host) and the target is already active. These calls will result:

  1. Connect with deploy the false value - it will be 307658 with error saying that the system is currently running (already connected), and you can reconnect.
  
  
  2. Connect to deploy true value - it will be 307658 with error saying that the system is running and you cannot deploy.
  
  
  3. Disconnect with put false - undeploy it will cut the target (host) bridge but let the defintion of running system.
  
  
  4. Disconnect with undeploy true set - this cancel the deployment of the current definition of system and disconnect the gateway of the target.

  So for a robust application, you probably should handle error

• convert elements using the DAQCard-6024E card to USB-6221using LabVIEW 2009

  I just got an old project, the VI has been primarily designed using the DAQCard-6024E map. Since we would be upgrading the equipment and the DAQCard-6024E serves not long. However, they want to keep the similar façade. I am trying to convert the drop-down menu that I can use with USB-6221 with Windows 7, but I don't know how. Can anyone help?

  Windows 7, NI USB-6221, LabVIEW 2009 sp1

  Hi smoothenigne007,

  After watching your upgrade.  All your writing VI should use the same task.  There is no need to close this task until the end of the program.  In addition, you can remove all the time because they do not allow the task close a loop.  I did a performance highlighted with your code and you can see that the first task was not allowed at the time wherever the data reached the second task.  When you try to create the second task, the error is generated.  Because you do not give me multiple writes to the same port there is no need to open and close the task each time.  Here is a link that will explain a little more about the DAQmx driver works.

  Getting Started With DAQ

  Kind regards