Removal of access numbers
I did not know that whenever I have move and update the Skype To Go number, I get a new access number. I have now 3 from different States. I'm in the United States. Any way I can delete the other access numbers while I only have 1?
Hello
There is no need to delete. Just use the number of the location where the local rate is applied
I recommend that you always run the latest version of Skype: Windows & Mac
If my advice helped to solve your problem, please mark it as a solution to help others.
Please note that I usually do not respond to unsolicited private Messages. Thank you.
Tags: Skype
Similar Questions
-
STG access numbers do not work: they do not respond
Twice in the last month, the access number for my STG does not work. I compose, but no response, no voice prompts, etc.
The first time that I have updated my online site, which has not changed the access number, but does not seem to put something else because it started to work again. This second time this thing did not work. I also tried two other access numbers in Sacramento, California, and they did not work either, just the silence.
Access numbers that do not work at the moment are (all U.S..):
(530) 554-1364(916) 756-4248(916) 596-3019
Fixed! And it turns out to be the residential gateway to AT & T (modem/separator/WAP gizmotron) that was the problem. AT & T has sent a new (different model entirely) and once connected the access number for Skype-to-Go has worked.
No thanks AT & T so. I'm sure that AT & T knows that they have modems problem, but they never admitted this way:Me: I don't think it's a problem of AT & T. I'm going back to Skype to try and work with them.
Cat at & T Rep: try to replace the residential gateway and see if it works.
Me: But why he would only block numbers from Skype?
Cat at & T Rep: I'm going to go ahead and process the order in lieu of the residential gateway.
Cat at & T Rep: as far as I am concerned, it will be a problem with Skype.
Me: ok
Cat at & T Rep: However, you and I don't want to give any reason to Skype, when we return to the question.
Cat at & T Rep: so for this reason, let us go ahead and replace the RG and see if it works. -
Have a computer Pavilion laptop model HP Pavilion 17-e119wm (product # F9A46UA #ABA). Need the instructions step by step to remove the access door and the hard drive then.
I need to remove the HARD drive so I can retrieve the data before you install a new HARD drive and reinstall the operating system.
I don't even find how to remove the access door and do not want to break.
Any help would be greatly appreciated.
Thank you
Interview Guide & is on your Support page.
http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=6761918&
-
Removable storage access is denied
Hello world
Before my question, I'm not 100% sure that it is related to Windows 7 or Windows Server. Please let me know if I'm wrong.
A few weeks ago I had to block access to all classes of removable storage to a group of 5 users or more in the company. So I used the "Computer Configuration" GPO (Computer Configuration > administrative templates > system > removable storage access > classes all removable storage: deny access for all 'Active'.) I applied it to the users, and it worked fine. From there, they were able to use the key USB, CD, etc... After awhile, it was decided by the administration they could get access to rear. So I removed the GPO of these users. After some time, users are complaining that access was denied again. From there on, here's my resolve the path
- I did a GPRESULT and I could see that the GPO has been applied.
- I looked to the top of local computer policy (gpedit.msc) and this setting is not configured
- I looked upward in the event viewer in the computers and the domain controller, nothing interesting found
- I tried to make a GPUPDATE/force and restart
- I tried to remove the computer from the Active Directory and join it back to the field
- The GPO still exists, but not applied to users having the problem, I tried with 2 computers of third parties to reproduce the problem. I applied the GPO, denied access to all removable storage classes. I délettrée the GPO and access to all removable storage classes to restore.
At this point, I don't know what to do. It has been a little hours (days) now that I searched on the internet about this problem and the only user I found that solved this problem, solved by formatting computers upward... This isn't the solution, I want to use.
Please note that these users are in a connected remote site MPLS to the main site and there is a DC in each site and also the replication works very well.
Best regards
Mike
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Book 15 G2 Z: removing keyboard access SODIMM slots
How can I remove the keyboard of a book 15 G2 Z to access the other 2 RAM SODIMM slots.
I want to get up to Maximum 32 GB of RAM and can easily access 1 and 2 housing by removing the back cover. But I can't understand how go down the keyboard to access the 2 other housing.
I have only managed to locate the 2 keyboard screws (indicated by the symbol keyboard little), are there more?
Once I took them how I raise the keyboard with damage or scratch?
Sign in to www.hp.com/go/sml
Under the 1. Product category: choose-desktops and workstations
2. range: book Z Mobile Workstation
3 range: Z book 15 g2
Under Selection of media and additional resources
Choose videos to remove/replace, select Keyboard.
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the white button on the right to say thank you Thumbs Up *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
GBL84
Although I am an employee of HP, I speak for myself and not for HP
-
Removal of access to the Task Manager
Hello
I'm removing the user access taskmgr on Win7. I am connected to the PC as administrator using the user name of the administrator account.
Go to windows\system32\taskmgr, right-click and select Properties.
Click the Security tab.
I would like to add a username here, but it doesn't have a button 'Add', just 'Edit '. I click on edit and he opened another box, but the 'Add' and 'Remove' buttons are gray out and cannot be selected. Under "Permissions for users", I can not select the checkboxes.
How can I add a user and make these selectable options? Thank you.
Best regards Michael G.
Hello
These should help:
How to enable/disable the Task Manager
http://computerstepbystep.com/windows_task_manager_windows_7.htmlHow to add or remove the screen CTRL + ALT + DELETE Task Manager
http://www.SevenForums.com/tutorials/63006-CTRL-ALT-DEL-screen-Add-Remove-Task-Manager.htmlI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
How to remove the Access Manager
Can someone tell me how to remove the Manager of my computer it makes me crazy that I can't do anything online without entering the password anywhere from 10 to 15 times and sometimes more.
Thank youHi DeannaKing,
Thanks for posting your query in the Microsoft Community Forums.
I understand from the description of the problem you are getting pop-ups on the Windows 7 computer access Manager.
Please provide more information on this issue.
1 have you ever had the password?
2. you are the administrator of the computer?
3. what browser you use on the computer?
If you use Internet Explorer see the steps.
Access Manager is a tool that blocks or allows websites specific, based on the ranking of the site content.
You can disable content advisor by following these steps.
(a) open Internet Explorer. Go to tools and click on Internet Options.
(b) select the tab content and here if your Content Advisor is enabled, you will find a button to turn it off.
(c) click on disable.
Check out the link:
Internet Explorer Content Advisor: Frequently asked questions
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
What is the cli command to remove the entire access list, but not a single ACE on asa5520 v7.2.1?
Hello
He has 'clear config access-list WORD' where the WORD is the name of the access list.
Caution - If you do not specify a particular access list, then all access lists are disabled.
HTH
Andrew.
-
Remove the 'Access forbidden' lines in complement Essbase
Dear all,
Is it possible to remove the lines 'No access' as '#Missing' and '0' values to Excel using the snap-snap-in spreadsheet?
When I was trying to zoom from the top member, Excel is also supply members with members of the "forbidden access". "The only option now that I was"Selection of members"method or through the query designer.
Is there another way to delete those not accessible to the consultation member in the excel add-in?
Thanks in advance.
Best regards
Barouk P.
Look at the setting of SupNA config file. There is no no access delete as #missing in the excel add-in. I guess it will work in Smart mode the same way, but have not tested. Since it's a server setting and not application or Configuration snap-in, I'm guessing that is on the server until the data is returned
-
ESX 3.5 Update 4 - Build 153875 - LUN still accessible after removing the access
My friends
We have 3 ESX cluster connected to the HP EVA 6400 Storage. Some LUN used by the process of migration of virtual machines. In any case, after this process I removed and then VMware cluster.
I've run Analyze again process and LUN disappeared! When I click in Add STORAGE LUN seem to be added.
Display the menu of the storage adapters, LUN paths is always avaiable.
After that I checked the errors in the journal:
LVM: 4482: may be a snapshot: disabling access. See section resignatuting
IPMI Message Handler: BMC returned an incorrect answer, expected netfn 5 CMD 25, had 5 35 netfn cmd
This error occurs more than once.
Someone help me?
TKS!
Hello
Check your mentioned below, Kb may be similar problem
http://KB.VMware.com/kb/6482648
http://KB.VMware.com/kb/1006756
Thank you
Samir
PS: If you think the answer is useful please consider rewarding points.
-
How can I remove the inventory numbers from a list of dump of the catalog?
Hello:
I've been watching way too long code and really can't figure out how to do a dump of the catalogue list without showing the numbers on the right (they appear in brackets). Actually, I'm not even sure if it's an inventory number, given that the site has no inventory 15, but next to the item to a category, it shows "(15) banks.
When you do a {module_cataloguelistdump, -2}, which is the number that appears next to your category (in brackets) and how can I remove it?
I'd love to help someone can offer. Thanks in advance!
Please provide more information in this case. Your developer has created a really clever way of counting of products in the catalog and adding the number to the menu items.
The JS code that does this is here childtocherish01.businesscatalyst.com/javascript/scripts.js
This is the code:
catalogCount: function() {}
If (($(".prodDumps").) Size() = 0) {return ;}
$("body") .append (")
")$(".prodDumps_li").each (function () {}
var $targetli = $(this);
var $targetAnchor = $targetli.find ("a");
var $targetAnchorText = $targetAnchor.text ();
var $targetUrl = $(this).find("a").attr ("href");
var $targetAjaxContainer = $(".ajax-conteneur-a");
$targetAjaxContainer.load ($targetUrl + ".productSmall", function () {}
var number = $targetAjaxContainer.find("p").size ();
$targetAnchor.text ($targetAnchorText + "(" + count +") '");
});
});
}, / / catalogCount
-
Removal of access of users after hours
All,
We are running Oracle 10 g. What is the best way to remove the user's access after hours that is from 17:00 to 06:00? I searched this site and only thread I found waswhich is not helpful to me. My manager wants users to access the Database only during the user's work hours which is M-F 8:00 am - 5:00 pm. Any suggestions would be greatly appreciated. Seyed
I hope this helps.
http://kamranagayev.WordPress.com/2009/07/28/user-access-to-database-within-limits-of-time/ -
How can I remove obsolete iMessage numbers
I have a contact whose phone number has changed over the years with his work. I corrected the information of contact, but every time I start a new message and type the name it shows all the back issues. It is a real nuisance. I'm really ready to try a different type of phone, although I have a Mac and iPad. There must be a simple way to do it. I have an iPhone 5 and OS9.2.
Sometimes if I have messages from my Mac or iPad.
Hi DRR84,
Thank you for using communities Support from Apple. I'm sorry to hear you're having such problems with Messages on your iPhone. If you encounter problems with e-mail to a specific contact, in this case because updates of their coordinates appear to be fill out correctly, you can try to remove all current individual or you group involving, as messages below:
If your messages are not sent or you do not receive the messages
Check your details:
- Make sure you use the right phone number or email address of the contact.
- Go to settings > Messages > blocked and make sure that the contact is not on your list of blocking.
If messages will not send to a certain person or you need assistance with group messages
Sometimes it will not send your messages to a particular contact, or you might have problems with Group Messaging. For example, you could meet a group conversation and receive your own message. Or you could get a new phone number and see your old listed as a recipient in an existing group conversation.
Delete the conversation * who has the problem and start a new conversation:
- Open your Messages and view your list of conversations.
- Straight shot left on the conversation you want to delete. Then, remove faucet.
- Open your Messages, type and enter the phone number or email address of your contact or contacts.
- Write a new message and press send.
* When you delete a conversation, you will not be able to recover. If you want to save parts of conversations or their attachments, you can take screenshots. You can also tap a bubble attachment or message, and then tap more > save.
If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support
Concerning
-
How can I get back the content removed by the numbers
Hello
I accidentally delete some content in my spreadsheet in numbers. How can I get back the deleted content?
Thank you
Vincent
If you did not leave, then you can use the menu item "Edition > Cancel" (or
+ z key combination) until you have recovered your work. This will cancel each step at a time -
How to remove easy access to your computer?
I or anyone else in my house to do the easy access on our pc and its quite annoying with the pop ups is when starts up.
Hello
What we pop you get when you start the computer?
If the Narrator or on-screen keyboard opens automatically during startup, then proceed as follows:
a. click the Start button and select Control Panel.
b. open Classic view.
c. now go to ease of access Center.
d. click on 'Use the computer without a display', uncheck "turn on Narrator."
e. click on apply.
f. now click "Use the computer without a mouse or keyboard" and uncheck "use keyboard".
g. click on apply > =, and then click Save.Kind regards
Afzal Taher
Microsoft technical support engineer
Maybe you are looking for
-
Satellite C660D - recovery issues
I tried to do a HARD drive recovery that worked, but when WIN7/Toshiba "preparing your desktop" screen comes up the laptop freezes. I've built since the recovery in safe mode discs and the same precise problems occurs. I've disabled most of the thing
-
I can not find send it and receive button on my outlook express.
do not send and receive in outlook express I can not find send it and receive button on my outlook express. Opening of the express shortcut icon outlook, it provides options for awhile but it disappears. Can you help me to get the instructions to rec
-
I use Microsoft Windows XP SP3 and Microsoft Security Essentials. I did 2 locked users: 1 locked with custom Restrictions user running Internet Explorer and other Internet browsers, write and draw and nothing much and is welcomed by right clicking on
-
16 GB Sandisk Cruzer is only 4 GB after you remove U3
I deleted the utility 3 gig and after Bart PE loading on it, I noticed that the player shows only a 4 GB. capacity. How can I go back for 16 gig? I do not have the data on the disk. I want just the complete concert 16 return. Any ideas? Thank you
-
Message on the screen "not genuine Windows 7' then 'join HP Smart adapter.
HP laptop, less than a year, running Windows 7, 64. These messages appeared on my desktop saying "" Windows is not genuine, Build 7601' and ' attach a smart adapter HP for maximum performance "." I called HP, computer out of warranty is an extra cos