Removal of startup parameter error: the specified Service does not exist as an installed Service

Hello

I am currently removing two services in Autoruns, for the reason that they are highlighted, and that means that it no longer exists. However, I'm running into some trouble while he was trying to do, I get the following error:

Removal of startup parameter error: the specified Service does not exist as an installed Service

For diagnosis, I downloaded my log of Autoruns on OneDrive text file and you can view it by clicking here.

Thank you

Party of Lighthouse

My research yesterday using Google yesterday suggested malware damage.

Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "chkdsk c:/r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter it when asked if you want to run chkdsk on restart the computer. Type exit, press ENTER, and then restart the computer.

Please run the SFC system and say if she cannot fix corrupted files: http://support.microsoft.com/kb/929833

Tags: Windows

Similar Questions

  • Computer disconnects error the specified domain does not exist or could not be contacted

    Original title: Vista connection problem

    Using Vista, I can not connect. It does give me an option of safe mode. When you start in normal mode, it just runs and runs but does not charge. When I use the repair option which brings me to a login screen, but not my normal connection, he says any other user. Any user or password that I use, I get the following message: "the specified domain either does not exist or could not be contacted.

    Hello

    ·         You will remember to do recent changes on the computer before this problem?

    ·         Your computer is on the network?

    ·         What is the exact message that you get in what concerns the "other user"?

    I suggest you follow the steps below:

    Method 1:

    Restart the computer in safe mode controls the State of the question. Let us know the results. Follow the steps from the link to the following article to find out how to start the computer in safe mode:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2:

    If the problem occurred recently then I would suggest allows you to perform a system restore from winre mode at a time where everything worked well. Follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  • Group Policy infrastructure failed due to the error below. The specified domain does not exist or could not be contacted.

    using several Windows 2003 domain in an attempt to push the msi using Group Policy is following on xp sp3 machine error

    Group Policy infrastructure failed due to the error below.
    The specified domain does not exist or could not be contacted.

    Note: Due to the GP Core failure, no other component processes Group Policy policy.  Consequently, status information for the other components are not available.

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • The specified domain does not exist or could not be contacted.

    Last night I completely disconnected my laptop. This morning when I turned on the machine, she does everything as planned. When I reached the screen that requires a password to connect to Windows, the following error message came after I saw that my password and press ENTER.

    The specified domain does not exist or could not be contacted.

    I use Windows Vista Ultimate and the laptop connected to a wireless router.

    I tried to restart and stop several times. It did not work. I did a Diagnostic Windows memory check and it went well. Also, I restarted Windows in Safe Mode and some other modes and received the same exact error message.

    Thanks in advance for your answers!

    Dan

    Hello
     
    1. don't you make changes before the show?
    2. is the laptop connected to a domain or have you tried to connect to a domain?
    3. you have to any other user account on the laptop?
     
    If you have any other user account on the laptop, try logging in there and see if the problem still occurs. If you are able to connect, sever the computer from the domain. Try the following steps to separate the field.
    1. right click on computer from the start menu, click Properties, click Advanced system settings, the computer name, change, select workgroup and workgroup name type.  Click Ok. You will need the necessary permissions to perform this task.

    If the computer is not connected to a domain and you have not made any changes recently. Try to restore the system using Vista DVD.
    To run the restore of the system using Vista DVD, try the following steps.
    1. start in Vista installation DVD.
    2. choose your language settings, and click Next.
    3. click on repair your computer.
    4. choose your operating system and click Next. This should bring up the System Recovery Options.
    5. click on system restore.
    6. follow the instructions in the wizard to complete the task.
    7. once the system restore is complete, start the computer as usual and try to connect.
     
    For more information on the Windows recovery environment options, see this link:
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
     
    Try the steps and post back with the results, so that we can help you further.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
  • Somehow, I lost all my windows games. "C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist."

    Hello

    Somehow, I lost all my windows games.  I have Windows Vista Home Premium; Internet Exployer 9 & Service Pack 2.  I don't know if you need any information Add ' l to answer my question.  But if anyone can help me, I'll be very grateful.

    I'm not at all computer literate.  So if you answer me, please give me for exact directions.

    I already watched: Control Panel; Programs of devices &; and the box is checked for the 'games '.  I also clicked on the word 'Games' and all games can up and they are all checked.

    When I try to access the games, I get this message:

    C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist.  Check the path and try again.  (But I don't know how to check the path!  Can someone help me?

    Thank you, b.

    C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist.  Check the path and try again.

    What do you get the message above? You try to put a tick in the box empty for Minesweeper in Windows turn features on or off?

    If you uncheck the box for games, click OK, restart your PC, then check the box for games, press OK and restart again, what happens?

    Is it one bought for PC & that you own, or is it a PC belonging to the company?

  • "The specified domain does not exist or could not be contacted" then tried to connect to Windows

    Original title: could not open a session after computer F8\Repair selection

    Running Vista Home Prem

    Dell Inspiron 1501

    No Cd MFG.

    I have recently been struck by application pretty nasty virus/malware and want to do a factory restore. The problem I have is that when I select the option to repair through F8 at startup I get to the logon screen and all it shows is 'another user' in the way witness name of user/pass fields.

    I tried every possible user and the user/pass combo I could find and think. Every time I have enter a value in these fields and try to connect, I get the message "the specified domain does not exist or could not be contacted", if I try to log in without putting information in the field I get a msg of windows security saying that I have a user/pass to open a session.

    I looked in all possible aspects of user accnts, changed the need to open a session, deleted all passes, gave full control to all parts of windows and I still get the same screen.

    I need to know if there is a way around this or if the virus has changed the aperture setting of session for the repair operation? Also, if someone could tell me what measures the system and what files it loads when you browse the F8 repair op.

    Anything you could tell me would greatly

    Thank you

    Running Vista Home Prem

    Dell Inspiron 1501

    No Cd MFG.

    I have recently been struck by application pretty nasty virus/malware and want to do a factory restore. The problem I have is that when I select the option to repair through F8 at startup I get to the logon screen and all it shows is 'another user' in the way witness name of user/pass fields.

    I tried every possible user and the user/pass combo I could find and think. Every time I have enter a value in these fields and try to connect, I get the message "the specified domain does not exist or could not be contacted", if I try to log in without putting information in the field I get a msg of windows security saying that I have a user/pass to open a session.

    I looked in all possible aspects of user accnts, changed the need to open a session, deleted all passes, gave full control to all parts of windows and I still get the same screen.

    I need to know if there is a way around this or if the virus has changed the aperture setting of session for the repair operation? Also, if someone could tell me what measures the system and what files it loads when you browse the F8 repair op.

    Anything you could tell me would greatly

    Thank you

    Hey

    link below has the dell way they do a reinstall of recovery

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

    If you continue to have problems with it contact dell

    There is also a support link for dell at this link of recovery

    It's their recovery process

    Walter, the time zone traveller

  • Vista the specified domain does not exist or could not be contacted

    Hello

    I recently had problems with viruses etc on my computer and because of its extremely slow performance I want to re install windows vista to make it to its factory settings.  I use a laptop HP 530 which has a HP Backup and Recovery utility, which is able to reinstall windows by using the backup that is held on a separate partition.  My computer is not outside of a work group and I'm the only user on the computer with full administrator privileges.  I know also that the password of my account and mine is the only account set up on the system.
    However, when you attempt to reinstall Vista, when the computer restarts at the beginning I wonder put a username and password.  I tried to leave this blank, enter the username and password for my account and nothing else I can think of.  Annoyingly. I get the error message "the specified domain does not exist or could not be contacted" every time and so I am unable to reinstall windows because I can't get past.  I reinstalled windows in the past and never encountered this problem.  As far as I know that I did not recently, major changes on the system other than the elimination of viruses etc.
    If someone could help me with this, I would greatly appreciate!
    Graham

    Hello

    you restart and press F11 to start the process of restoring HP

    and follow the instructions from HP

  • Windows Defender: the specified path does not exist.

    What happens if when I have on windows defender, he said

    C: / Program Files/Windows Defender/MSASCui.exe
    the specified path does not exist.
    Check the path and then try again.

    Hello

    "%ProgramFiles%\Windows Defender\MsAsCui.exe".

    Right click on your icon - properties - Shortcut tab and compare your configuration to the one above.

    This is the equivalent of:

    ' C:\Program Files\Windows Defender\MSASCui.exe "'

    Note the space before the P and the / slashes in your. Rob - bicycle - Mark Twain said it is good.

  • When I try to open a game (Chess Titans, inkball, etc.), I get the following message: "c:\Program Files\Microsoft Games\Chess\Chess.exe the specified path does not exist.

    When I try to open a game (Chess Titans, inkball, etc.), I get the following message: "c:\Program Files\Microsoft Games\Chess\Chess.exe the specified path does not exist.  Check the path and then try again. "Should I do to get my games back so I can play them?  I've tried enabling/disabling of Windows features, but it did nothing.  I also tried to go through the run, but that has not worked.  And, I tried command prompt, but it says that I am not the administrator, who I am.

    Not accessible games

    I haven't had any changes consciously, and the games do not work in any user account.  When I've done sfc/scannow (command prompt) he said that I was not the administrator.  I could learn from another source to solve this problem - in the start menu, right click on the command prompt icon, and then click Run as administrator.  Hope everybody help with this problem.  If you do not have command prompt in your Start menu, any type of command prompt in your search box and it should appear.

    Anyway, my games work now.  Thank you

  • Trying to enable and disable the scheduled tasks back but becomes "the name of the specified task * does not exist in the system.

    I am trying to create a .bat file that stops a set of scheduled tasks and start another game, but when it works it is said that there is no such thing as the name of the task

    SCHTASKS/Change/disable /TN ImageCopyTest
    ERROR: The name of the specified job 'ImageCopyTest' does not exist in the system.

    Running schtasks/query does not list the tasks that I have implemented in Task Scheduler

    For operational reasons, the tasks are set on "Run If the user is logged in or not ' and I read somewhere that this automatically makes the hidden task

    Can someone shed light on how I can get around what I need this operation for our recovery after disaster

    It's on Windows Server 2008 R2 Enterprise

    Hello

    Apologize for the delay in response. Because the question you posted is related to Windows Server and more complex than that which are usually dealt with here, this issue will be safer in our MSDN forums that cater to the more THIS professional audience.

    Thank you.

  • DeskJet 2542 all-in-one: 2542 Deskjet all in one error: "the specified module could not be found" when installing on USB

    Installation runs OK until the USB cable is connected, when the error message appears and the installation fails.

    I have correctly installed and work the printer on another XP PC of a similar age - that is to say old.

    I've updated the XP operating system to SP3 with many updates.

    Check that ports USB read only data fits OK;

    run a / v programs and malware, including Microsoft Safety Scanner;

    check that the USB drivers are up to date;

    software driver uninstalled and reinstalled with the software downloaded from HP;

    performed the procedures detailed in HP Support Forum 4022116

    The same error message.

    It's for my elderly neighbour - help please!

    The somewhat simpler answer to this problem was to do a clean install of XP SP2, accepting the necessary updates, and then install the printer software, downloaded from HP.  A lot of time but it worked, and the old PC runs a little faster!

  • Windows XP the specified domain does not exist or could not be contacted

    I think that as long as XP has been around, Microsoft would have found a solution to this problem.

    Everything I've found don't do me no good, because I can't cross the password prompt. Is normal

    or safe mode.  What am I supposed to do? I can't afford a new computer, so in the meantime I'm without my main

    computer.

    Some relevant information would be useful.

    Thank you

    Larry

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/307545

    It will be useful.

  • Receives the Message "the specified domain does not exist or could not be contacted" when starting

    I was working on my machine, normally the day before and I shut it down properly - everything was fine.  I'm confused as to what happened between the stopping and starting of the next day!

    After you receive this message, he asks me my password for the account of one on my machine.  I've never set up a password.

    I have tried rebooting several times and it gives me the same message.

    I started to run diagnostics, but he appeared to get hooked on a memory test.

    Any ideas on how to pass this message/fix, it would be appreciated!

    Your system appears to have been related to a field.  After that, it requires a reboot to take effect.  Once you restarted so he invites to connect to the domain.

    There are always local accounts on your computer that allows you to open a session, but they will have a password for all accounts if your system is connected to a domain (as it is a requirement).  To log on by using a local account, choose the name of your computer in the ' log on: "drop-down at the login prompt.  You will need to know the valid username and password for this computer.  If you or someone you know has an account in the domain that is joined to your system, allow you to logon to the domain by providing the valid domain user name and password.

    Once logged on you can undo your computer from the domain (right click on the computer in the start menu, properties, advanced system settings, change the computer name, select workgroup and type workgroup name.  Click Ok.)  You will need the necessary permissions to perform this task.

    If you are unable to go further, because you don't have a valid login, you can reinstall Windows.  If you format your drive when you re-install you will lose all data on this disc.  So if you need all the files from the drive, and you go this route, make a backup first!

  • causes VIX/vmrun.exe ' error: the specified version is not found "with WS 8.0.1

    vmrun.exe t ws start "Q:\VMware\REG\REG-XP3 (RC2).vmx"
    Unable to connect to the host.
    Error: The specified version is not found

    I installed in this order:


    Workstation 8.0.1

    VIX 1.11.0.18997

    On a Win7 x 64 SP1 box.

    There also the vSphere PowerCLI 5.0.0.3501 installed however this seems to need to ESX and vCenter, so it is useless for me.


    Long story short, I need vmrun maintenance tasks such as deleting snapshot which through GUI takes a.) ages, b.) pump lock your workstation / takes focus.


    How can I get this working again? I checked the vixwrapper - config.txt and it lists the following:

    # Workstation 8.0.0
    vmdb WS 14 8.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
    Player vmdb 14 4.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
    WS-shared 14 no Workstation 8.0.0 - 8.0.0 - and-vSphere - 5.0.0
    WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
    drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
    WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

    Thank you.

    I just found this same problem with Player 4.01 exaxt... VMware VIX who uses this configuration file and if the gift ' e versions EXACTLY match it flows without any usable information.

    Add this to your config file and it will work...

    # Workstation 8.0.1
    vmdb WS 14 8.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
    Player vmdb 14 4.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
    WS-shared 14 no Workstation 8.0.1 - 8.0.0 - and-vSphere - 5.0.0
    WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
    drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
    WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

  • Windows security - specified account does not exist

    Help, please

    im running windows 7 on a HP Probook 6540 b, im the only one using the computer so I wanted to skip the log on screen, here's what I did I press the Windows key + r and type "control passwords2" in the command box that appeared and unchecked users must enter a user name and password to use this computer not even start in safe mode to help me back

    but still, it shows the log on screen and now I can't login my account told me "Windows Security - the specified account does not exist", but my account is still there.

    The correct command is actually 'control userpasswords2', not "control passwords2".  And before you uncheck "users must enter a user name and password", you need to click on the name of the account under which you want to log.

Maybe you are looking for