Remove a file from the system32/drivers folder, keyboard does not

After receiving warnings from Kaspersky on the activity of type keylogging I foolishly deleted the file in the Windows\system32\drivers folder and after a disconnection cannot return the keyboard no longer works. Can't remember which file it was, but obviously, it must have been a keyboard driver. Tried in safe mode back to last good configuration and safe mode to identify you with no success. Tried a keyboard ps2 without success. Anyway around this or could it be fixed easily if I took it for repair?

Hello

Once you're up and running again after doing a restore system http://www.microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx

Please click on the check mark as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

Tags: Windows

Similar Questions

  • How to remove unwanted files from the local root folder of the site?

    Hello

    I work with Dreamweaver CS4 on a Windows PC. I have finished my site but I have a lot of files in my local root folder that I don't want to upload to the server. These unwanted files are for most of the photos that I should not be used in my site. I do not understand how to download the site on the server using ftp and remote folder in Dreamweaver. I suppose that if I move the page html files to the remote folder that my photos will not be associated with these html files automatically. I used a Dreamweaver template during the construction of the site. I wish I had a folder with only the necessary files for the site (all html pages and a folder of images) to upload to the server. Is there an easy way to move all my pages and images associated with a folder or remove all unwanted files in the local root folder? As I see it now, I'll have to go through all my pages and write down each title of the photo and then go back and delete each unwanted file. This seems a lot of your time, so I thought that there must be an easier way, I hope.

    Any help or ideas will be of course very appreciated, thanks, dluthier

    I guess you mean 'work' files, not the images that you use in your Web site.

    If they are not related to all pages of your site, you are free to move by using your computer's file management tools. I can give you specific instructions, if you wish, but the short of it is that you do not keep them in the folder root of your site at all.

    In my way of working, I have a folder for each client that includes:

    • The correspondence of this client folder
    • Folder to 'Work'... the PNG images, etc., or of the images from the client
    • Record the site root

    When I get e-mail, I save the message in the appropriate folder of correspondence, I save the images etc in the folder of 'Work' to the customer and I only save images and other who have already been optimized in the Site folder, keep it as intact as possible.

    Even if the general warning must always use the files Panel to move files around, that applies to files which are linked and form part of the structure of your Site. Moving your files 'work' outside of the structure can be carried out safely in windows explore your PC.

    That said, if you need to download and there are files you want to download, or to move, you can 'hide' the in the files Panel by right-clicking on the file name and choosing 'Cloaking '.... "in the context menu that appears.

    To the point that the image files that are downloaded to the remote site will not 'automatically' be associated with your html files. That is right. Unless you have configured explicitly links or associations between files, images will not associate themselves!

    On the subject of 'automatic' way to do this, you can make a link to check on all of your local site. Window > results > Link Checker will bring up the appropriate window, which will give you the choice: broken links, external links and orphan files (this is the one you want). Use the green triangle tower at the left end of the Link Checker to set your auditor... Current Local Document or a set current site.

    If you want to make a checklist to ensure that you move them all, you can save the report by clicking on the small icon "Floppy" under the Green turn the triangle. Who will be on a file text and make up a dialog that you save the report, which will show the broken links, external links and orphaned files. After you move the files to your heart's content, rerun the link check and confirm that you moved the files you want to move. Make sure that you DON'T move files consciously... do not move the .htaccess files or .cgi files, etc.

    Who will save you from actually having to 'write' file names!

    Z

  • When you use Internet Explorer, I can download files from the incredimail site. This does not work when I use Firefox. I see no differences in the settings. Can someone help me?

    I can download IncrediMail gold Gallery when I use internet explore content how I want, but when I use firefox sometimes it allows me to download content from the Gallery, but would not allow me to download more, or he wouldn't let me just download

    • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
    • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

    • Makes no changes on the start safe mode window.

    See:

  • How do I remove a program from the start menu, so it does not show the taskbar?

    I don't want Skype to start automatically when the computer starts.  How can I get this feature stops for Skype?

    Start Skype. Opening of session.

    Uncheck "start Skype when I start windows" then

    Who will stop him?

  • Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

    Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

    By definition, this folder should contain only the elements you don't need.  If I understand correctly, this temporary folder is a place where temporary files are stored during program facilities and the facilities.  However, I have seen references other sites to help saying some programs can store folders and files.

    I do my own temporary file elsewhere, name it accordingly and move all the files in the temp folder to the new folder. Use your computer normally for a while, and if nothing complains about missing files, you have a good indication that none of the moved files are important and should be safe to delete.

  • can I delete the files from the backup.backupb folder?

    I'm trying to restore a backup time machine on a hard drive that is smaller than the backup. It is safe for me to delete unnecessary files from the backup.backupb folder?

    Actually, no. Deleting files directly from the sparebundle will lead to file corruption.

    Ref: Pondini - Time Machine troubleshooting

  • I recently installed 7.0. Can't open file: 'NEW - files from the Clipboard '. What am I not doing?

    I recently installed 7.0. Can't open file: 'NEW - files from the Clipboard '. What am I not doing?

    Hi myless,.

    I apologize for the long delay. What program work? I would like to know if I can take you to the correct community for assistance. Thank you!

    -Kathleen

  • Remove stranded files from the hard disk to the VM package

    I have a virtual merger machine that is now 96 GB in size (database development) and it contains several virtual hard drives.  Now, I have cleared one of the drives on and outsourced (he placed on an external Firewire based drive).  Removing the abandoned drive does not reduce the size of the virtual machine.  Research in the VM package, I see that the hard disk file (vmdk) is always inside the package and using 54 GB.

    The question is so I can delete these files from the VM package or it will damage the VM?  I tried to make a backup of the VM, but right at the end that it maintains the production of an error so I would like to know if anyone has experience with this before making the jump.

    Removing a virtual drive simply deletes the references, it does not delete the virtual disk. If you do not have a snapshot (for example), it is safe to delete. Make sure get you the right one, well - I recommend you all first move somewhere else and then try to start the virtual machine. If it is used at the moment (but maybe not if it is only used by a snapshot), merge will complain.

  • mvzcc.sys - was created under the system32/drivers folder. This portion of windows or any other file is the software? or is it a virus?

    A new file mvzcc.sys was created under the folder system32/drivers on my widows vista. I managed to clean some viruses and malware on my computer the past 2 days, but this file is created during these days of 'clearing '. (its size is 841 KB)

    Can someone tell me if it's a windows file or any other known file software (or perhaps a driver file)?

    I couldn't find anything on the internet, and when I tried to remove it using the method mentioned here - http://www.howtogeek.com/howto/windows-vista/how-to-delete-a-system-file-in-windows-vista/

    I got an error saying that "a device attached to the system does not work.


    Please advice.

    Thank you!

    Hello

    No info on Google so this file is probably malware - other than this error there has been another
    indications of malware?

    You can submit them for that specific file control:

    http://www.VirusTotal.com/
    http://VirusScan.jotti.org/en

    http://VirSCAN.org/

    http://www.ThreatExpert.com/fileScan.aspx

    http://www.viruschief.com/

    ===================================

    No one program cannot be used to detect and remove any malware. Added that often easy to
    detect malware is often accompanied by a much more difficult to detect and remove the payload. If it is better
    to be too full now than paying the price much later. Check with them to an extreme overdose
    point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
    in the regular when windows you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
    UnHackMe execution)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download
    It's here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
    It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
    How to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
    Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
    taken (such as the anti-virus software, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • You need to remove all files from the hard drive.

    Original title: I need to empty my drive hard so that I can reinstall windows XP - I bought new computer and put my old one family member...

    I don't want my personal info on my old computer.  I was told to empty / delete (?) my hard drive, then reinstall

    Windows xp from the operating system CD.   Even if I throw the old computer, I want all the info removed for security all

    suggestions?

    Hello

    Please take a look at the following article:

    Protect and serve your personal files

  • Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

    I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

    Boot into safe mode and see if it will remove. If this is not the case, try this tool.

    Unlocker File Remover

    Download it from FileHippo
    http://filehippo.com/download_unlocker/

    Download from CNET
    http://download.CNET.com/WOT/3000-2378_4-75011499.html

  • How to access some files from the Windows.old folder?

    I recently made the mistake of updating my OS before save lots of interest - information is all the info from Outlook, I had (e-mails, contacts and calendar).

    I have posted a question to the Board of Directors of Windows Vista for the cat, but was recently informed of this discussion here.

    THUS,.

    I was told I could "...". Browse to C:\Documents and Settings\xp_username\Local Settings\Application Data\Microsoft\Outlook and move the pst file in My Documents folder.  It is a hidden file so you will need to activate the hidden files and folders. »

    When I tried to do, I got as much as Windows.old > Documents and Settings > xp_username, but when I click on the "Local Settings" folder, I get a message telling me:

    "C:\windows.old\Documents and Settings Settings\xp_username\Local is not accessible.  Access is denied. »

    I get a similar message when I try to enter in the Application Data folder in the xp_username folder.

    How can I do at this point?  Thank you!

    Try this link:

    Windows Vista junction points
    http://windowsconnected.com/blogs/joshs_blog/archive/2006/09/28/Windows-Vista-junction-points.aspx

    see if your "C:\Windows.old\Documents and Settings of utilisateur\Local Settings\nom" has a shortuct looking for icon. If it changes to the command prompt in the directory that contains the junction point, i.e. "C:\Windows.old\Documents and Settings\nom of user' can do a: dir / a: s *. at the command prompt.

  • Restore files from the Windows.old folder

    original title: I want as my files back!

    I had to reinstall my windows vista on my computer and I thought that my files had been erased. I thought about everything, pictures to program files and user settings were gone. BUT I found all in a folder called "Windows.old" and it has everything in it. I want that all these files in return. As in like a restoration.  Is there a way I can do it at all?

    Programs must be reinstall it from the original media: CD, etc.

    http://support.Microsoft.com/kb/932912

    Read the info above re windows.old

    See you soon. Mick Murphy - Microsoft partner

  • Try to remove deleted files from the Media Player library

    There are video files in my Windows Media Player library that I deleted, but items still appear in my video library.  When I right click on the file and choose 'Remove', nothing happens.  The video files were originally in the folder my music and I deleted them using the Explorer.  However, they still appear in the Media Player library (even if they are not functional - because I have deleted!).  I followed what Umesh suggested GregRN, but that doesn't seem to work for me.  How can I get rid of deleted files appear in the Media Player library?   I use a HP Pavilion dv4 using Windows 7 (64-bit).

    Hello

    For the question, you can also view the following link for more info. and measures to solve the problem.

    http://social.answers.Microsoft.com/forums/en-us/w7music/thread/e68d4e33-897C-421d-8D4B-dbf53c9ee4a5

    Thank you

    Mary
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Copy files from the local PC folder to the VM folder

    I would like to copy files from my local PC file to a Dtx200 (which is the data store for my data center)

    I used the following commands:

    $SourceBuild_ISO = 'E:\fileslist\Image\image1.jpg' #folder on my local PC where I have my vsphereClient installed

    Copy-DatastoreItem-point $SourceBuild_ISO -SAN2:\BHM\BHM_ISO_IMAGE Destination-Force

    where SAN2 is my data storage for my VM

    the error I get is can not find the drive named SAN2

    However if I use the following commands

    Get-data-server store < my VM server IP > -name "SAN2"

    I get

    Name FreeSpaceMB CapacityMB
    ----                               -----------      ----------
    3938452 4766208 SAN2

    now I use

    $datastorename

    = Get-data-server < my VM server IP > store -Nom "SAN2" | New-DataStoreDrive-name datastorename

    Copy-DatastoreItem-point

    $SourceBuild_ISO -Destination datastorename:\BHM\BHM_ISO_IMAGE-Force

    This method works. (New-DataStoreDrive performing a mapping to the real data SAN2 store)

    However, New-DatastoreDrive is an alias for a command (for New-PSDrive) sometimes gives the error that New-DataStoreDrive is not a valid cmdlet and sometimes it works well

    If I want a copy of the files in my local PC file to a Dtx200 (which is the data store for my data center)

    use the following commands directly? Why do I need to map a drive to the data store?

    $SourceBuild_ISO = 'E:\fileslist\Image\image1.jpg' #folder on my local PC where I have my vsphereClient installed

    Copy-DatastoreItem-point $SourceBuild_ISO -SAN2:\BHM\BHM_ISO_IMAGE Destination-Force

    where SAN2 is my data storage for my VM

    No explanation? Suggestions?

    The path to your data store that you must supply the parameter - Destination must begin with a drive of psprovider.

    Try it like this

    New-PSDrive-location (Get-Datastore SAN2) - ds name - PSProvider VimDatastore-Root ' '

    Copy-DatastoreItem-point $SourceBuild_ISO-Destination ds:\BHM\BHM_ISO_IMAGE-Force

    You can also use the readers of vmstore or vmstores.

    These 2 are there automatically after a Connect-VIServer.

    Given these discs start higher up in the hierarchy of vSphere, you will need to fit the destination path.

Maybe you are looking for