Remove additional results of the previous step

Hello world

I have a step of the 'statement' (step 1) inside a while loop that creates an additional result to the stage (using Step.AdditionalResults.CustomResults.Insert).  For each row in the While loop this 'statement' step will create a new additional result.  After step 1, I want to delete the additional result created in step 1.  If I don't delete it, after each loop my report file will include all previous results additional loop.

Is there a way to remove the additional result created in step 1?

Thank you very much!

Review the attached file in sequence.  Why don't you just use the same result?  Why do you need to insert and remove every time?

Can you send me this sequence you sent the screenshot?  This way I can get a better feel what you are doing.

Tags: NI Software

Similar Questions

  • Combining results of the previous steps in digital test

    I am relatively new to TestStand. Here's what I'm trying to do.

    1. Call VI A with numerical limits, make measurement, store the value in the local order.

    2. Call VI B without numerical limits, measure, store the value in the local order.

    3. Calculate: A - measure B. difference the result with numeric limits.

    I need to create a very simple VI with two entrances, a subtraction function and an exit in a time limited digital LabVIEW to implement step 3, or is there a more recommended way to do it?

    Thank you.

    Stephen

    Here's what I'd do:

    Call VI as a step in the action.  The measure in a local store

    Call VI B as a step in the action.  The measure in a local store

    Use the None adapter to create a numerical limit step.  Set the Data Source to Locals.AValue - Locals.BValue

  • Where are the result of the seq steps?

    Hello

    I'm calling a sous-suite that has a lot of steps.

    Now, I want to find (in the RunState... variable) the result of certain stages in the same sequence (not the MainSequence).

    There is a dedicated line for the previous step (which is excellent), I would use a similar one for the other steps.

    Thank you

    Rafi

    I think you can use the name of RunState.Sequence.Main ["Step"]. Result for the results of all the steps.

    Thank you

  • Move to another frame as a result of the previous

    Hello guys, once again

    Just another question - is it possible to go to another frame as a result of the previous comes. For example, if I have a photo posted on frame 1, I want to keep referring to the. So in part 2, I create a button that goes back to frame 1, also I do the same in 5 and 6 frameworks, there are 3 images that return to section 1. I want then to frame 1 of each of the individual frames based on the one you have just returned. Thus, for example, so I came back 5 frame to frame 1, I wish back to frame 1 in section 5, by pressing another button. The same button should then return you frames 2 and 6 respectively based on what image you just came (2 to 2 and 6 to 6). Is this possible or am I barking the wrong tree and I'm going to have to make several images with the same image and change the action for the button script?

    See you soon,.

    Chris

    assign a variable to store the previous image and use this variable in your image 1 button:

    section 1:

    {returnBtn.onRelease = function ()}

    {if (previousFrame)}

    Stop (previousFrame;

    }

    }

    your other executives:

    previousFrame = this ._currentframe;

  • How to return to the previous step in a workflow to void?

    We call a workflow under an approval action in a main workflow. In the child workflow, we have 9 steps. If at any stage in the child (other than the first) workflow user rejects action, workflow control should return to the previous step in the child workflow itself.

    We have added a custom action in the output of all stages of children workflow events. This is the logic of the output of step 4 of the child workflow event. A similar logic is there for every step of the workflow of the child.

    < $if wfAction and wfAction as "REJECT" $>
    < $wfSet ("wfJumpTargetStep", "Step3@childWF") $>
    < $wfSet ("wfJumpEntryNotifyOff", "0") $>
    < $endif$ >

    With this code when the user made the rejection of the child workflow action, it takes us back to the main workflow and not to the previous step in the child workflow.

    This approach is correct?

    -Pratap

    1 3 events are input, output and set to date.
    2. rejects arrives in the area to update but you can not reliably respond it because to reject it, he leaves immediately (don't not through the exit event).
    3. the rejected content goes to the rear in the workflow step by step (even going back to the main workflow in a workflow sup) until he finds a step that has valid editors (not only reviewers).
    4. If it does not find a Publisher he goes all the way back to the step of automatic Contribution at the beginning of the workflow and is in a kind of no mans land until the donor (or an administrator) will and approve it again.
    5. to check if something has been rejected to the input of an editor event stage BEFORE the stage where it is rejected needs to have the code to check the status of rejection.

    The workflow under should be able to capture dismiss it as you wish. All the steps in the child are steps only workflow (workflow sup)? Or maybe the people in the steps do not have RW access to the document? This is what I would predict with your described symptoms.

  • Be a mistake to create an additional result in the Table UUT_Results:

    Research site of NOR and found information on how to create additional value of loggin in the UUT_Result table.  I copied and saved the database.seq, and the standard process model.  parameter has been added to database.seq.  parameter added to the recall, then added a local variable to the model.  I did all the steps in order, then check the schema was OK and the journaling property has been added.  I always get the following error message and don't know if a step is missed.

    An error occurred calling "LogUUTResult" in "ITSDBLog" of "ZNIUGOL TestStand database logging"
    An error occurred when setting a column value.
    Statement: UUT_RESULT.
    Column: WO_NUMBER
    Property: measure. [Measure 1]
    Name of variable or unknown property 'Logging.WO_Number '.

    Source: TSDBLog

    Error code:-17306; Name of variable or an unknown property.

    Geographical area: step 'Journal USE result' sequence 'SequenceFilePostResultListEntry' in 'SequentialModel2.seq '.

    I think I had two different problems.  I was able to connect additional content under the UUT_Results, but I had to change my settings for database logging.  I disabled additional results, and everything started working.  I have always had a problem with the activation of the additional results box and never gave a reason why.  This occurs with standard features.

    If the last error noted the activation of additional results, so I disabled and was able to get my full database table.

    Thanks for the reply.

  • I need to remove my camera but the previous owner does not exist

    Hi I have an ipad that has not been deleted correctly, and the previous owner is not available for me how to remove this ipad for my son can use it x

    Sorry, but there is no way t go around blocking activation. Contact the previous owner in the contrary case, your device is useless brick.

  • call run params in the taskflow with the results of the previous run

    I have a requirement to call the executeParams on the object from a point of view after the execution of the executeparams on another display object in a taskflow. I'm able to pass the variable to the view object binding 1 of taskflow input parameters. But variables bind to the view of the second depends on the results (current line, it returns only one row) execution of view 1st in the taskflow.

    How to bind to the 2nd display performance variables in the taskflow according to the results of enforcement of 1 view. The second point of view expects 2 parameters of the current line of the 1st viewiterator.

    Taskflow definition:

    ----------------------

    executeWithParams1stView-> executeParams2ndView-> .jsff


    The page definition for the second executewithParams with links, I configured. But the following returns no results of the 2nd iterator. But if I pass values hardcoded for the NDValue I get the correct results.


    < action IterBinding = "AgencyPoliciesIterator" id = "ExecuteWithParams" RequiresUpdateModel = "true" Action = "executeWithParams" >
    < NamedData NDName = "bPolicyNum".
    NDValue = "${data.renewal_policyterm_taskflow_renewal_policyterm_taskflow_ExecuteWithParamsPageDef.PolicyNum.inputValue}" "
    NDType="oracle.jbo.domain.Number"/ >
    < NamedData NDName = "bAgencyNum".
    NDValue = "${data.renewal_policyterm_taskflow_renewal_policyterm_taskflow_ExecuteWithParamsPageDef.AgencyNum.inputValue}" "
    NDType="oracle.jbo.domain.Number"/ >
    < / action >


    Thank you and best regards,

    S R Prasad

    Published by: oumar s Prasad on November 10, 2010 13:36

    Hello

    I don't know exactly what the problem with your application, but maybe you could try to create a method in the application module impl.
    If I understand correctly, you must run the firstVO as soon as the taskFlow is called and based on the line returned by one, run the secondVO.

    You can do this with a method in the ApplicationModuleImpl. I created an example:

    public void executeViewObjects(Number managerId){
        if(managerId!=null){
          getDepartments1().setNamedWhereClauseParam("inManagerId", managerId);
          getDepartments1().executeQuery();
          Row dep=getDepartments1().first();
          if(dep!=null){
            Number departmentId=(Number)dep.getAttribute("DepartmentId");
            getEmployees1().setNamedWhereClauseParam("inDepartmentId", departmentId);
            getEmployees1().executeQuery();
          }
        }
      }
    

    If you expose this method and drop in your taskFlow you can map it is the input of the taskFlow parameter input parameter.

    Gabriel.

  • How do I report the results of the previous record to the next record in a query

    Hello

    For example if I have data of the table as.

    AC_CODE DATE CREDIT DEBIT

    ----------------------------------

    1001 15 APRIL 15 10

    1001 APRIL 25, 15 2

    1005 5 APRIL 15 100

    1005 8 APRIL 15 25

    ----------------------------------

    And I want to train as below, where, BALANCE = (previous record BALANCE) + CREDIT - DEBIT

    (assuming that NVL (, 0) for all columns)

    (assuming the BALANCE reset after change of AC_CODE)

    DATE AC_CODE CREDIT DEBIT BALANCE

    --------------------------------------------

    1001 15 APRIL 15 10 10

    1001 APRIL 25 15 2 8

    1005 5 APRIL 15 100 - 100

    1005 8 APRIL 15 25 - 75

    --------------------------------------------

    (AC_CODE ORDER, DATE)

    Of course, it can be reached using query of database function.  My question is, is it possible by using a query without involving all functions.

    Thank you

    -Anand

    Model clause could help you meet this goal...

    Note: There is a separate area for SQL, PL/SQL issues here in OTN and don't forget to provide insertion, create scripts for your sample data for a quick response

    with t as(select 1001 AC_CODE,to_date('15-APR-2015','DD-MON-yyyy') dt,10 credit,null debit from dual union all
              select 1001,to_date('25-APR-2015','DD-MON-yyyy'),null,2 from dual union all
              select 1005,to_date('05-APR-2015','DD-MON-yyyy'),null,100 from dual union all
              select 1005,to_date('08-APR-2015','DD-MON-yyyy'),25,null from dual
            )
        select ac_code
              ,dt
              ,credit
              ,debit
              ,balance
            from t
            model
                partition by (ac_code)
                dimension by (row_number() over(partition by ac_code order by dt) rn)
                measures (dt,credit,debit,0 as balance)
                rules
                    (
                        balance[any] = nvl(balance[cv()-1],0) + nvl(credit[cv()],0) - nvl(debit[cv()],0)
                    )
            ;
    
  • Pages: Open Office has a checkbox option to return to the previous step, such as get back a deleted row. Y at - it such an option with Pages?

    Open Office has a verification option to bring back a deleted word or a line. Y at - it such an option with Pages?

    Raymond,

    Try using the hotkey (⌘Z)

  • Condition of additional results work does not correctly for the parameters

    TestStand 2014

    Trying to connect a parameter only if the status of the step is "failure" will not save the setting when the step will actually fail.  On the other hand, variables with the same State will record very well.

    The sequence attached illustrates this.  Basically I have a sous-suite that returns a random number and a string as parameters.  I use the random number to evaluate against my limits for the test call.  I want to save the parameter of string only if the step fails.  So I put as an additional result, then assign the condition

    Step.Result.Status == "failed".

    The data never show on the report.

    But when I put a result additional explicit with the same local variable and put the same exact condition it appears on the report when the step fails.

    I'm puzzled as to why settings will not open a session to this condition, but additional explicit results work fine with the same State.

    Any thoughts?

    Thank you

    Condition for additional result of the parameter is evaluated before the State sequence is set to failure. The 'out' parameter additional results are evaluated probably just after the code module, so if the status of the step is not changed by the call of code module, then it will always be "Running".

    I can see how it would be nice if it worked the way you ask, but keep in mind for input/output parameters it is usually the same expression/variable to both the 'in' and 'out' additional result, so it is important to the time at which the result is recorded. It must be done before calling code module for 'in' settings and after the call of code module to 'out' parameters to reflect the State of the variables to these points in time. I think that the intention is that the additional result for settings must reflect the State of the variables at the point in time immediately right before the call for 'in' settings and immediately after the call to 'out' parameters So if you want to connect under certain conditions a value based on the status (where the State is not changed directly by the code module), with the help of a result extra ordinary as you discovered is probably the best way to go.

    Maybe for the parameters we might delay logging to the end, but which may result in a change of behavior if the variable state changes again once before that. If you want us to consider or have another idea for how to handle this better please let us know or maybe post something to the exchange of ideas.

    Another possibility is that we could temporarily connect the results before and after the code module, but then not assess the condition to the end and throw the recorded result if the condition is false. Who can still cause a change in behavior although if "Value of Log" expressions have side effects.

    Hope this helps clarify things.

    -Doug

  • Additional results fail step?

    So I get to use the latest versions of TestStand and I play with the additional results for a test step.  What I was asking is; additional results reach the status of success or failure of a step?  For example, if I have a numerical limit step that also returns a Boolean value, can I use an additional result to not respect the condition based on the value of the Boolean value?  Or are, additional results just for reporting?

    Additional results affect the content of the report. If you need one step regarding its outcome depends on two different parameters (for example limit indicator and digital Boolean), you must create a custom step type.

    hope this helps,

    Norbert

  • Number of the results in the report variable

    Hello everyone,

    I need help in TestStand reports. I use TestStand 2014 and 2014 of Labview, both 32 bits.

    The situation is like this: I am running a test with test steps 3. The first stage of the test is a step of "additional results" which records the device under test info (versions of the hardware software etc...). This information appear in the report and the result data in the database (table prop_result). The next 2 steps are the steps 'real' which measures something.

    In the report, there is a call from the variable "Number of results" (see the screen attached capture) and you see a '3 '. There are actually only 2 steps of 'real' test as I don't want to consider the first step of "additional results" as a test step. How can we affect the variable 'Number of results' so that it does not count this first step? I tried to use the properties-> Run Options-> record result of the for Option set to "Disable". It works and the number of results appeared as "2", but the device under test info do not appear in the report and not in the prop_result of the database table.

    In general, how can I get the number of results of account not a step, but continues to display the result in the database and report? Is there an API where I can access and modify its value (number of results value) such as: "Number of results" - 1?

    Hope someone can point me in the right direction. I have attached the release of the report, as well as the file in the sequence.

    Yours,

    chati

    I ment, you can change the XML seq.--> \Components\Models\TestStandModels\reportgen_xml.seq generator (Ref http://www.ni.com/white-paper/3977/en/).

    It's the AddReportHeader, you need to change. Or more specific step 9 (in teststand 2012) which is a statement-->

    Parameters.ReportHeader += "<" +="" fileglobals.reportelementname="" +="" "="" type='UUT' "="" +="" "="" title='" + ResStr("MODEL", "RPT_HEADER_TITLE") + "' "="" +="" "="" link='" + Locals.UUTItemNameForLink + "' "="" +="" "="" uutresult='" + Str(Locals.Status) + "' "="" +="" "="" stepcount='" + Str(Parameters.StepCount) + "' "="" +="" "="">\r\n".

    and then, you can modify the varabel StepCount using some filtering by using for example a subsequnce that counts only the type of measures that your customer wants to be counted.

    There might be ways esier there, but that's what I'd do.

  • Not present additional results in real estate to TestStand 4.0

    Hello

    I want to use a multimeter to save the current values in my TestStand 4.0
    test sequence. I was using TestStand 4.1 and recorded the results
    end of my report. I had checked the option additional results, but this
    option is not present in 4.0. Where can I find this option to save the
    value in my report?

    I used TestStand 4.1 but had to return to TestStand 4.0

    because some modules, I want to use only are not supported in TestStand 4.1 yet.

    Thank you

    If you proceed as numerical limit to evaluate the measured value, the result will be the part of the report unless you deselected the "include measures" in the report options.

    This is in any case recommended to include the measurement values in your report.

    You can add additional results using the 'ReportText' variable in the container - Step.Result. Just use a postexpression to convert your value to a string and put it on the ReportText (something like: "Result.ReportText = str (locals.mymeasurement)" "").

    hope this helps,

    Norbert

  • Remove VMware completely when the installer fails - HOW?

    I had VMware Workstation 8 works fine on a 64-Bit machine of Windows 7.

    I bought 9 Workstation and tried to install it, and he says that he should uninstall version 8.

    Well, it failed.  Now, I can not install ANY version, version 7, 8 or 9, all versions.

    The installer is apparently unable to deal with an error to uninstall an earlier version. Why?

    [at this point, Monday, December 17, 2012, it is all fixed with VMware technical phone support. It involves several

    steps and a key was to use the utility Fixit from microsoft from here: http://support.Microsoft.com/kb/2438651/en-us

    and 1308 VMware knowledge base article http://KB.VMware.com/kb/1308 .

    Microsoft fixit scanner not found VMware, but she showed 'unknown' (or other?) and VMware

    technical support took the key to the article above of 1308

    {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6} HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\

    Paste in the registry key when asked by the fixit utility

    {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6}

    Who noted a mistake and fixed it.

    My options are:

    1 reinstall the Windows operating system and start from scratch (which will take a few days to catch up with installed programs).

    NOTE: DON'T DO THIS WITH THE SUPPORT OF VMWARE

    2. remove all vestiges of the previous installations of VMware so I can install without being told that the installer has found another version.

    NOTE: THIS WAS DONE BY THE TECHNOLOGY WITH THE HELP OF THEIR CONTROL PROGRAM REMOTE

    ------------------------------------------------------------------------------

    They have the option "/ clean" on the installer, which does not work, but it must do what he pretended to do so, remove all previous keys and elements.

    What a VMware solution that fixed what well Setup obviously cannot fix. It should prepare my computer so it will NOT report versions of VMware if I can install two versions 7, 8, or 9.

    -------------------------------------------------------------------------------------------

    With the help of VMware support, they were able to completely remove VMware and install VMware 9. I'm going to

    to try to writeup that they did, but the solution took about 30 minutes and many find and remove the

    Directories of VMware.

    I now have version 9 installed and it works fine.

    Post edited by: jeff92677 - TO EXPLAIN THAT THE PROBLEM IS SOLVED, AND THANKS to VMWARE for THE SOLUTION

    This feature was introduced in WS 7.
    Since then WS installers often think that older versions is present - and this happens even on systems that has never ever been before WS.

    On the issue of the port... This is normal. Most of the time it does not configure the port correctly during a first installation.
    You have installed Skype? -Make sure that remove you it temporarily.
    Then stop vmware - pass manually - change the
    C:\Documents and Settings\All Users\Application Data\VMware\hostd\proxy.xml
    -use an equivalent path for win7 of course - so that it uses the port you want.

    445

    Then restart vmware - pass and it works hopefully

Maybe you are looking for

  • Parenting Clip Library

    Hey anyone here know if we can apply a correction of the color of a clip in the tray and have this stream of correction to all instances of the affected element downstream? I often do this by applying the color and sound adjustments to items in a seq

  • My Apple Watch always shows the America all of a sudden.

    On the Earth shows that I used to see the view of the Earth from my current place of residence, with a green dot showing my position. All of a sudden it still says America, and my position of Lighthouse is never visiable. Impossible to find all the s

  • CLR ERROR 8000405

    I have Windows 7 and Windows Live Mail in my office. They worked very well. Last night when I shut down the computer, Microsoft did an automatic update. Files 1 to 14. When I started the computer automatic configuration of files that happened. Once W

  • Z10 blackBerry cannot Z10 version os level

    Dear friends,  Defects with the screen on my Z10, I would return the unit I have temporary use (Z10 too), because my provider has given me a new warranty.  The problem is that trying to make the complete transfer of the data from the blackberry link,

  • How can I my Printmaster 8.o to work on 7

    I have a lprogram really cool Printmaster Gold 8.0 which took place late 98 and Millennium.    I can't run on 7.   I tried the resolution of compatibility issues and still can not run it.  Please help