Remove and reinstall Microsoft Visual Studio 2008.

Similar Questions

• Windows Update has detected an error code 80200053 for the installation of the updates for the update of security for Microsoft Visual studio 2008 and 2010.

  Hello

  I received an update for security update for Microsoft Visual Studio 2010 (KB2542054) and the security update for Microsoft visual studio 2008 Service Pack 1 (KB 2538241). This updates have been detected by windows update on my laptop. However, when I tried to install these updates, they detect an error code 80200053, windows update encountered an unknown error. I need help with this ASAP. Thank you.

  Hello

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also check the links below and try to download and install the stand-alone package with updates:

  Microsoft Visual Studio 2010 RTM MFC security update

  Microsoft Visual Studio 2008 Service Pack 1 MFC security update

  Hope this information is useful.

• A security update for Microsoft Visual Studio 2008 Service Pack 1 XML Editor (KB2251487)

  Friends, y ' All must help me with that.

  I don't know all you Vista users know aware of the KB2251487 of security update.

  Told me all the time that I need to install this particular update. I click on install and after 72hrs, 365 days or something else, the installation is still stuck at 0%.

  1. It's bugging me to no end. I searched in the Microsoft forums for help on this topic and I tried all them; None of them work.
  2. I called Microsoft support even, but I was told that I will be charged $ 99.00

  I mean... come on!

  Could someone out there please help me out on this... for free?
  Please, I beg you!

  Thank you, I would really appreciate it!

  Hello

  1. you receive an error message/code when you try to install the update?
  2. what troubleshooting steps did you do to fix this?

  I suggest you follow the mentioned below of the methods.

  Method 1: perform the clean boot to see if you can install the update.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after you perform a clean boot, perform step 7: reset the computer to start as usual from the article above.
  If the problem persists, follow the methods.

  Method 2: reset the windows update components.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Method 3: download the update below and install it manually.

  First install Visual Studio 2008 Shell (integrated mode) with Service Pack 1 Redistributable Package from the link:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16480

  Then install Microsoft Visual Studio 2008 Service Pack 1 XML Editor Security Update from the link below:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26419#system-requirements

  Reference: Impossible to install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  See also the link: http://social.msdn.Microsoft.com/forums/en/vssetup/thread/c87d70ab-b536-4cf8-a7eb-f78764bf8b3f

  Hope this helps!

• Microsoft Visual Studio 2008 SP1 end of Support

  Hi all

  I am designing a Microsoft Visual Studio 2008 SP1 for Motorola MC3200 Scanner solution at hand and would like to know the end of the support for this product.

  Could you please help here?

  Thank you

  Anurag

  All time life Visual Studio load Dates - https://support.microsoft.com/en-us/lifecycle/search?sort=PN&alpha=Visual%20Studio

  For VS2008 - https://support.microsoft.com/en-us/lifecycle/search?sort=PN&alpha=Microsoft%20Visual%20Studio%202008&Filter=FilterNO

  Hope this is the info you wanted.

• Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. What to do next?

  The complete error message that I receive is less when I try and install SQL Management Studio on a PC running Windows 7 64 bit running SQL Server 2008 R2. The only point is that Visual Studio is not installed then, how can I update something that is not installed in the first place. At the end of the day, I'm trying to install SQL Management Studio so that I can recover my backup of clients.

  Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. Please update all installations of visual studio 2008 sp1 by visiting Microsoft update

  My mistake

  

  Programs installed

  

  Hello

  Please read the following support article:

  https://support.Microsoft.com/en-us/KB/956139

  Maybe you have the Visual Studio Tools for Applications 2.0 installed.

  In addition, you can get a quick response with SQL Server related questions in the following forum:

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• Integration of Pro * C/C++ (11g) in Microsoft Visual Studio 2008

  Hello
  
  I need help to integrate the Pro * C/C++ (11g) in Microsoft Visual Studio 2008
  There is an Oracle Documentation on this subject, but is for Oracle 10 g and Visual Studio .NET 2003: (http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28427/pc_ahintegrat.htm#i634207)
  This information is not control for Visual Studio 2008.
  
  Using the steps defined in the old documents:
  
  * 1.*, specifying the location of the Pro * C/C++ executable: THIS SEEMS OK
  (Tools-> Options-> projects & Solutions-> directories of VC ++-> Executable files-> (like: C:\app\Orahome\bin))))
  
  * 2, specifying the location of the Pro * C/C++ header files: THIS SEEMS OK
  (Tools-> Options-> projects & Solutions-> directories of VC ++-> Include files-> (like: C:\app\Orahome\precomp\public))))
  
  * 3.* adding .pc files to a project: IT SEEMS OK
  (Project-> add-> element Visual C++-> Source-> select the .pc file)
  
  * 4 adding references to a project .c files: THIS SEEMS OK
  (Project-> add-> element Visual C++-> Source-> create a .c file)
  
  * 5, adding the Pro * C / C++ Library for a project, IT SEEMS OK
  
  * 6 custom specifying Compiler Options is it OK?
  
  Project settings-> Page properties file.pc-> Config Propierties-> C/C++-> general-> include additional directories: C:\app\OraHome
  
  Project settings-> Page properties file.pc-> Config Propierties-> C/C++-> results-> name of the object file file: $(ProjDir)------$(InputName) .c
  
  * 7 adding Pro * C/C++ in the Tools Menu WHERE IS procui.exe?
  
  Tools-> External Tools-> add-> Pro * C/C++
  
  Title: Pro * C/C++
  Command:?
  Argument: $(TargetName)
  Initial directory: $(WkspDir)
  
  Please help regard footnote 6 and 7. Thank you

  Hello

  VS2008 is not supported with Pro * C and 11 g. ttp://download.oracle.com/docs/cd/B28359_01/install.111/b32301/toc.htm#BGBEEBAD

  There is no procui.exe today, which was abolished in 10.2. You will need to use the command line version now (proc.exe)

  For custom build options, I have always understood the command line exactly necessary to precompile the particular file and pasted all in the part of the command of the "pre Build Event" line... for example:

  
  proc parse=full iname=sample1.pc oname=precompiledsample1.c include="d:\oracle\product\11.1.0\db_1\oci\include" include="d:\oracle\product\11.1.0\db_1\precomp\public" include="d:\PROGRA~1\MICROS~1\VC98\include" include="d:\PROGRA~1\MICROS~1\VC98\PlatformSDK\include"
  

  It will be useful,
  Greg

• KB952241 for Microsoft VIsual Studio 2008 security update installs successfully... more and more and more (think of Groundhog Day)

  I have a machine on the domain that gets the same MS update to install whenever she connects.  KB952241.  She runs the update, Windows says "it's all good."  You restart and then she invited again to run the update even.  Thoughts?

  Please install the Visual Studio 2008 Sp1, which includes this fix and many other bugs too. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Impossible to reinstall Microsoft Visual Studio 2015

  • Earlier, I installed microsoft visual studio 2015 in drive H and it worked very well.
  • Later I mergerd H drive with other readers to a place in the Visual studio installation directory and drive C has been moved to a folder in drive E.
  • Visual studio was not at all and add remove program can not repair or uninstall.
  • Then I took it off by revo uninstaller and the remaining files and registry entries.
  • I also uninstalled 4 to 5 other programs that are installed with visual studio, something like the pack of language, etc.
  • When I tried to reinstall, the installation was already selected and gray outside so it cannot be changed, nor custom nor typical option.
  • The installation location selected was H:\visio
  • I searched on the internet and then I changed the drive letter from E to H, so the installation started, but it find you the following error.

  https://www.dropbox.com/s/knkymnzo24rd6to/Visual.jpg?DL=0

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Microsoft Visual Studio 2008 cannot debug after effect SDK project example

  Hello

  I am trying to debug a project example for After effect CS6 SDK, but when I press the Debug button I get this message:

  

  

  What can I do to debug my project correctly?

  Thank you!

  Dudy.

  in the project properties window, you must set the command for debugging

  giving the path to afterfx.exe file.

  

  You can ignore the warning related to symbols.

• How can I download and install the Visual C++ 2008 runtime x 86 V 9.0.39729.01

  This shows that downloaded but not installed. I can't find where it is so that I can activate it.

  Hello

  ·         You receive a message to install Visual C++ 2008 x 86?

  ·         What operating system is installed on your computer?

  ·         Where have you tried to download this program?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can uninstall and reinstall Microsoft Visual C++ 2008 x 86 and check if that helps.

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

   

  Method 2: If the problem persists after installing above package, the question must be a software problem. I suggest you take a cheque to boot this is a software conflict problem. If this isn't the case, it is always recommended to fix the problem with the support of the manufacturer.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Let us know if that helps.

• Re: Cannot install Visual Studio 2008 on Vista 32-bit

  Hello

  I have a satellite P200 with Vista Home premium SP1 and I need to install it on Visual Studio 2008.
  When the install wizzard starts it checks the compatibility of the computer and could not return this:

  "Setup has detected that this computer does not meet the requirements to install this software. These conditions must be met before you can install Microsoft Visual Studio 2008 Professional Edition - ENU
  Requirements and software prerequisites
  Windows XP Service Pack 2 update information
  You must install this service pack to complete the installation. Visual Studio requires the installation of this service pack before you install Visual Studio"

  So the only solution I have is to exit the installation wizard, so I can not install VS2008

  It seems that someone else has the same problem with a Toshiba Satellite also! See http://forums.microsoft.com/MSDN-FR/ShowPost.aspx?PostID=3392455&SiteID=12
  Microsoft product support has apparently no solution and find it strange!

  So please help me, I absolutely need of VS2008 to work and I change my laptop only because failed to install VS2008

  Thanks a ton in advance for

  Pascal

  Post edited by: pfo69

  Hi mate,

  Sorry, but just because one person in a MSDN forum has randomly the same machine you, does not mean that there is a related problem of the machine. Technically in comparing it s absolutely the same material as in an office and so why Don t you contact Microsoft technical support?

  It seems that it is certainly unwanted Microsoft and has NOTHING to do with Toshiba hardware or software, so please see MS support sites or give them a call, because it s THEIR software which won´t operate according to THEIR operating system.

  Welcome them

• Microsoft Visual C++ 2008 Redistributable Package (x 86) and other versions hold 4 GB of space

  Running Windows 7 Home edition (Spanish version)

  While trying to find space on my portable hard drive, I noticed that there are 8 versions of Microsoft Visual C++ 2008 Redistributable Package (x 86) on my machine. That's a total of more than 4 gigabytes of space. Is there a version that will cover all these? or can I just delete some of them?

  Original title: Microsoft Visual C++ 2008 Redistributable Package (x 86)

  I think you read the amount of space used for the wrong purposes.

  I have 19 installs C++ ("2005 - 08-10 & 12") that accumulate to about 86MB total (64 bit Win7).

  Adults are between 11-15 MB each.

  I have not been informed to the contrary and assume that newer versions of C++ are not cumulative.

  You will notice that everyone installs it different is a different version, and I expect the software

  who installed will seek this particular version.

  While I would probably uninstall all additional versions if I had the confirmation that the two

  versions 2012 (x 86 & x 64) have been combined, they don't take up much room, so I can't be bothered

  experimentation to uninstall and reinstall again if a software that I do not often do not load.

  in particular, because he cannot throw an error that specifies c++, this could lead to much .

  BTW - just to get the right terminology. Software is uninstalled. Files are deleted.

  While the software can be removed, doing so can cause problems both with to remove the title of

  Programs and features, leaving the back files (which can happen when you uninstall anyway),

  and leaving the registry entries.

  -If your laptop HDD/SSD is short on space, you will very likely move the files to an external HARD drive, or get a bigger HDD.

  Music, video are joint space pigs, followed by photos. Most of the software don't take up much space,

  but uninstall the "bloatware" that comes with many laptops may help some.

  If you have any games, they can use a lot of space.

  Note also that an SSD will last longer if you leave 25% of free space. HARD drives require 15% free space to

  the defragmentation. If you have a HARD drive and not of defraged for a long time you can find a part

  space and increase performance of defraging (which can be very time consuming if not done regularly).

  .

• What license should I provides, in India, rely on Microsoft Visual Studio 2010 Professional and Visual Studio Light Switch

  (1) if I want to build and sell, small PRODUCTS (but not services) (as a freelancer) based on Microsoft Visual Studio 2010 and last Visual Studio Light Switch, what license (s) devrais I provides, in India?

  (2) how can I get the license at a low price?

  (3) in the case if I hold a license and build the product, then what are all the license, my client should have? Ex: If I build a medical billing software, make my customer need to have the permit to switch to Visual Studio or Microsoft SQL Server 2008?

  (4) can I use Microsoft SQL Server 2008 Express on the deployment site (my client), or if my client needs to obtain a license for the database, and then which version of SQL Server 2008 build be cheaper?

  Thanks in advance,

  Hill.

  For support with Visual Studio, please click on the link below. Thank you.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• Why do I get updates for silverlight and visual studio 2008? I don't have one of these programs on my computer.

  The only thing I know that I can do is to hide these updates.

  Hi Liz Welker,.

  Please use the Microsoft Windows 7 forum.

  (a) is your Windows 7 operating system?

  (b) these updates fail to install?

  (c) that you get errors because of these updates?

  Check if find you Microsoft Silverlight and Microsoft Visual Studio in programs and features

  If these are not present in programs and features , then you need to reset the Windows components by following this link because it contains fixit : http://support.microsoft.com/kb/971058

  Importance of Microsoft Silverlight and Microsoft Visual Studio:

  Microsoft Silverlight is a programmable web browser plugin. It allows many features such as animations, vector graphics, and audio-video playback, all these applications are rich internet applications. Version 2.0 of Microsoft Silverlight was released in October 2008. He got a few other interactive features and support for .NET languages and development tools. It is compatible with many web browsers used on Microsoft Windows and Mac OS X operating systems. Symbian and Windows Mobile 6 phones will be also supported. New free software of third party named Moonlight is under development. Once released, it will bring compatible functionality to GNU/Linux.

  Microsoft Visual Studio is an integrated development (IDE) of Microsoft environment. It can be used to develop console and applications to graphical user interface and the Windows Forms, web sites, Web applications and web services in both native code with managed code for all platforms supported by Microsoft Windows, Windows Mobile, Windows CE, .NET Framework, .NET Compact Framework and Microsoft Silverlight.

  
  Importance of updates from Microsoft:

  Microsoft regularly issues updates or patches to fix security problems in their software.  The critical updates are ones that you should be concerned.  If they are not implemented, it leaves your computer vulnerable to hackers.  Service Packs are updated larger who upgrade and resolve security issues.

  If your operating system is windows 7 and that you don't want, disable the automatic updates for these programs.

  Activate the update or disable automatic

  So that Windows install important updates as they are available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Microsoft updates and optional updates are not downloaded or installed automatically. For more information about automatic updating, see Understanding Windows automatic update. To learn more about the types of updates that Microsoft publishes, go to this section of the Knowledge Base on the Web Microsoft Help and Support site.

  1. open Windows Update by clicking on the button start the picture of the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  You can also choose if you want to allow anyone to install updates by selecting the allow all users to install updates on this computer check box. This applies only to updates and installed software manually; automatic updates will be installed independently of the user.

  For more information, see: http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  hope this helps
  Aziz Nadeem - Microsoft Support

• Problem with the installation of Microsoft Visual Studio 2010 Service Pack 1 (KB2635973) and (KB2645410)

  Hello

  Enjoy views of expert here since I was a newbie in the Windows servers.

  I have an Exchange Server (Windows Server 2008 R2 SP1 Standard (the one used for the 2003 Server Migration) and now having issue to install 2 security updates below;)

  Update for Microsoft Visual Studio 2010 Service Pack 1 (KB2635973)
  Installation status: failed
  Error details: Code 66A

  Update of security for Microsoft Visual Studio 2010 Service Pack 1 (KB2645410)
  Installation status: failed
  Error details: Code 66A

  Tried to install and restart twice, but always failed. Did some research and found this link.

  https://TechNet.Microsoft.com/en-us/library/security/MS12-021

  However, with my basic knowledge, seems that I'm not sure the article.

  Grateful if someone could advise me on this.

  Kind regards

  Sir Kon.

  Hello

  Your question is beyond the scope of this community.

  Please post your question to the MSDN Visual Studio Forums.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  See you soon.