Remove driver and configure RDAC native multipathing

Similar Questions

• How partition an external hard drive and configure for Time Machine backup?

  I am a rookie just to switch to Windows Apple Mac and I'm looking to back up my new iMac with a Seagate hard drive 2 TB external.  My Mac is a 1 TB hard drive, I'm looking to partition for backup and storage.  Is this a good idea?  Is there a simple way to do it?  I appreciate any help I can get.  I also bought three years of Apple support, but I'd rather do it myself, so I thought I'd give this discussion from the community to try.  Thank you!!

  No, it isn't. Your working data and backups must be on separate drives in case one of them goes down.

  (138181)

• I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

  I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

  original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

  If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

  1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

  2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

  3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

• How to display ONLY the photos on my hard drive and remove the duplicates it.

  I bought Photo Sweeper but have heard warnings of ' reference fileis and the risk of the original photo, sitting on the hard drive.  .  Is there a way to see ONLY photos on the hard drive and use Photo Sweeper here?

  Background: on my HP PC for years, I've created folders for each Member of our family.  Thus, a paper copy of each group photo were regularly filed in each issue of people pictured in it.  Migration to iPhoto and iMac five years ago, all copies of the same photo were transferred on my Mac.  More recently, I've migrated my iPhotos library of Photos.  I would like to clarify these multiple copies to a hard copy, but I feel of the complications and risks. In particular, the integrity of all the projects I did (for example attach a photo to the album, a book or a slide show) could be compromised if I happen to remove the copy special paper which refers to this picture (the correct term?).

  It seems to me that, if I could see the actual photos on the hard drive and use the double Finder here, I could get the job done.  I could combine that info (faces, keywords, descriptions) that I added on a large number of copies and sign him for a single copy and then to eliminate duplicates. Would this work?   Back to a project, I could see a photo with a warning icon, a yellow triangle with an exclamation point inside, which indicates the hard drive file to which he referred is now defunct.  I could (I guess I could, but how!) change things to make this photo point to rest a copy on the hard disk, couldn't I?

  Tips appreciated.  The notice are maybe just don't not to alter my photo library, but it says that I have almost 30 000 photos. I know this isn't so.   Thank you.

  Your question is not clear

  What Version of the operating system and Photos you have? You have a referenced library or a managed library? What specific "warnings" topic referenced b = files you are?

  Please explain what you have and what is your concern

  LN

• Remove the recovery drive and drive C on the internal drive of 2 2nd

  I installed a Kingston 120 GB SVP200S37A / 120G on my HP Pavilion dv7t-1000 CTO Entertainment Notebook PC with Windows 7 Professional.

  I took the cable USB and case provided with my package and plugged my old hard drive of 320 GB.

  Installed the SSDNow v + Series software and installed it.  At this point, I was happy to see my new Kingston 120 GB SSD and unplugged my old hard drive.

  Last week, I installed my old hard drive to 320 GB in my laptop.

  My current SSD is the C drive and disc HP_Recovery (D).

  My old drive is Local Disk F and Local Disk G.  Can I do this in a single drive?

  Is it possible for me to remove the HP_Recovery (D) drive then put it on to my second drive?

  Hello

  Unfortunately, the second Bay of your laptop drive isn't bootable - this is true for all of the dv7 series, so spend the recovery Partition of your SSD HARD disk will cause any recovery attempt fails.  If you want to use a player of the second span, it can only be used for extra storage.

  To make the drive in the second span in a single volume, you must do the following - keep in mind that this will destroy all data on the disk.

  Hold down the Windows key and press R.  In the run box, type compmgmt.msc , and then press ENTER.  Click disk management in the left pane and let readers load upward.

  For all volumes shown on the Second disk, right-click each in turn and select "delete the Volume.  When you are finished, you should have just "unallocated space indicated.  Click on this and select Format to start the wizard.  Windows 7 will affect a Volume label so if your happy with it, just leave the default.  File system is NTFS.  Allocation unit size must be left by default.  Select the option to perform a quick format if it is not already done.  Leave all the other default settings, and then click Ok, and then Ok to start the process.

  Once this done, your disk should now appear as a single volume when you look under the computer.

  Kind regards

  DP - K

• OfficeJet pro L7780 all-in-one: full functionality of the driver and the software crashes to configure product.

  Windows Home Premium 64 bit operating system. Download full feature software and driver and follow the installation instructions. All software and drivers seemed to install but at the last stage (configure the product), it crashes after a few minutes and a fatal exception message (no error number). After this, uninstall all the software.  I took the following troubleshooting steps:

  Disabled all the normal startup items and services (except Microsoft) in MSCONFIG. As an administrator, and under Vista compatibility also led installation.  In addition, tried a basic installation.  My computer is a Dell PHE 8500 and is wireless. I tried installing several times in respect of the connection of the USB cable directly and wireless, but all had the same result. Completed all the steps except the last where the fatal error message appears after a few minutes.  Help

  Thought I would give it another chance: I've done the following:

  Ran L4uninstall.bat

  American ran Care System: registry clean and disk cleanup

  Connected accessories/tools disk cleaning system

  Restarted

  Insured that lates version of Adobe Flash Player has been installed

  Latest version of the software downloaded to the printer

  Went into MSCONFIG unchecked load startup under selected startup items checked "Hide all Microsoft Services" and disabled the rest of services under services,

  Restarted

  A ran another check of the register with the American healthcare system

  Ran disk clean again

  Off DSL modem

  Firewall and AntiVirus disabled Norton

  Restarted

  At installation of the printer as follows: first of all installed drivers

  Restarted

  A ran the remaining printer one by one with Solution Center last softerware

  Restarted

  Is surprised that Solution Center has worked without problem

• Remove the hard drive and optical drive on HP pavilion 500-164

  Hello

  I was eager to build a new computer and was hoping to use the hard drive and the optical drive from the Hp Pavilion 500-164 to reduce their costs. I'm confused as to how to remove the optical drive, because I removed the two screws on the left and don't know how to get to the other side as it wouldn't come out. When you remove the hard drive, the SATA cable wouldn't come off, so I stopped here and would like some advice on how to remove the hard drive from its Bay.

  Thank you

  Hello

  Please use the following guide:

  http://support.HP.com/us-en/document/c04100685

  Kind regards.

• Micrsoft tech removed from computer viruses. Now no sound. Installed the new driver and new software with no results. Help

  Virus called 2012 unregistered version XP itself connected to the computer.  At four different technicians and 12 hours to remove.  Last technician manually deleted and deleted all empty folders.  A finished, no osund available.  Since it is not a virus problem tells me that I'm on my own. Computer model is GQ6070 sold by Fry's electronics.  Their support staff are not interested to help (will not respond to the e-mail).  Download and install software RealTek AC97 Audio Driver and Codecs.  Still no sound.  Any ideas?

  Hello

  Read the following article that may help you.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• I want to allocate more disk space for my c drive and remove the drive d

  I want to allocate more disk space for my c drive and remove the drive d. I 26 gig on the d drive and only using less than 1% of it, and I have the same amount on c, but only 39% c left. How to do this.

  LEM explained the problems that you tried to resize partitions on the same drive.

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  You can generate more space in the system (usually C) the folder move partition.

  For temporary Internet files, select Start, Control Panel, Internet Options, temporary Internet files. Settings and move back.

  To move the storage folder Outlook Express select from Outlook Express Tools, Options, maintenance, store folder and change.  http://www.tomsterdam.com/insideoe/files/store.htm.

  How to change the default location of the My Documents folder: http://support.microsoft.com/?id=310147

  You may also change the default locations of the files in Microsoft Office programs when you choose to move the My Documents folder. For Word, go to tools, Options, file locations, highlight the Documents, click on edit and change the path. For Excel, go to tools, Options, general, and change the default path.

  My Documents is one of the many the created system of special folders, which include my pictures, and my music. It can be more easily modified using TweakUi. Download TweakUI, one of MS powertoys, here: http://www.microsoft.com/windowsxp/pro/downloads/powertoys.asp.

  In TweakUi, select workstation, special folders. You can scroll down to see the full list of special folders to the left of the button to change the location.

  You can move programs, but to do this, you must uninstall and reinstall the program. With Word and Excel, the existing data files are not affected by reinstalling. Most of the work in question is going to be reinstall all updates issued after those that are included with the original Microsoft CD / DVD.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive. In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc. These files can be compressed or not compressed. If compressed text the name of the folder appears in blue. If these files are not compressed you can compress. Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space. On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  Select Start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked. Notwithstanding, there are some files that are hidden. Again, you will not see the System Volume Information folder.

• Windows xp treats an external usb as local and non-removable drive.

  When I attach my drive external hard usb, Windows xp treats as a 'local' drive and won't allow me to backup to it.  How can I change this drive to a removable drive so that I can save him?  It's particularly unfortunate because Microsoft recommends that backups be made to external hard drives.

  Hello

  1. have you made changes on the computer recently?

  Us to change the drive letter for this device, then check.

  How to change drive letter assignments in Windows XP
  http://support.Microsoft.com/kb/307844

  I hope this helps.

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove a mouse device driver and prevent it to relocate

  Original title - how to remove a device driver

  How to keep a device driver of mouse to resettle after deleted the driver and disabled the automatic update. I delete restart and he's back. Frustrating.

  If it's a wireless mouse, use the suppression device in Control Panel.  Then remove the battery from the mouse also remove his receiver to the USB port on the computer.

• 'Remove all and reinstall Windows' format all the drives in my computer?

  If I use the option "all delete and reinstall Windows, it remove all of my hard drive and install a fresh copy of Windows or just format the C drive & let other readers of such drives what?

  No, just the system drive where Windows 8 is installed.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• I own Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to

  I have ownd Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to reinstall my Acrobat 8 legally bought and paid for, but he says that it cannot connect to Adobe to confirm my serial number and gave me only 30 days use because it is not registered.

  Help, please

  Post edited by: Bil Colthurst

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server