Remove Partition
What is the partition scratch? Anyone who can explain this to me?
Hello
You can check 'on the Scratch Partition' on page 153 of "vSphere Installation and Installation Guide" and also check the links below.
Changes of OPS part 5 - Scratch partition
Create a scratch location persisting for ESXi
Tags: VMware
Similar Questions
-
Remove partition Bootcamp failed
Hey, I tried to remove my windows via bootcamp partition, but it failed in the process. Now this partition seems to be lost. I tried to reboot into recovery mode and see if the partition appears in disk utilities - but it's not... Does anyone have an idea how to find it and add it to my os x partition?
diskutil list
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 251,0 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage Macintosh HD 214.4 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD GB + 214,0 disk1
Logical volume on disk0s2
0A7898A0-C449-4FDA-84EB-BF87D0A7692B
Unlocked encrypted
Cs diskutil list
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group 29C3E7B1-1279-479E-8719-A33535D4C033
=========================================================
Name: Macintosh HD
Status: online
Dimensions: 214361235456 B (214,4 GB)
Free space: 8970240 B (9.0 MB)
|
+-Physical volume 123BAA17-BB24-40C9-96C9-87CFC2610174
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 214361235456 B (214,4 GB)
|
+--> Logical volume family 23CD0BAB-DE8E-447C-91DC-C1B56841CD86
----------------------------------------------------------
Type of encryption: AES - XTS
Encryption status: unlocked
The conversion status: complete
High level queries: secure
| Password required
| Accepts new users
| A visible users
| At the Volume key
|
+--> Logical volume 0A7898A0-C449-4FDA-84EB-BF87D0A7692B
---------------------------------------------------
Disc: disk1
Status: online
Size (Total): 213999943680 B (214.0 GB)
Reversible: Yes (unlock and decryption required)
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
TPG - r sudo show/dev/disk0
Password:
start index size summary
0 1 PMBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 418674288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
419083928 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
420353464 69881255
490234719 32 table dry GPT
490234751 1 dry GPT header
The easiest method is a Time Machine backup/delete/restore as described in Re: doesn't have windows via bootcamp 8.1 installation .
If you want to try to use the commands from the Terminal, let me know.
-
Tecra A2: How to install the OS whithout to remove partition D
I have original windows xp installed on my Tecra A2, now I want to reinstall windows using the recovery cd but I don't want my data to be deleted from the D drive, would it be possible to install the C disk recovery cd and do not touch the drive D... Otherwise, I'll have to copy an avt 65GB data.
Someone help me please, I really want to apprct that.
Thank youHello
It of very clear. The installation of the recovery CD supports 2 recovery options.
Standard mode 1.) (and 2.) Expert mode.You must choose expert mode. There you can choose the partition where the OS is to be installed.
In this case that the data on the partition by choosing will be formatted. -
I upgraded to 250 GB SSD
I did the recovery disk and install it on the new SSD. How can I now safely remove partitions and merge it with the original disc of ssd? I want to use the 1 TB as a storage for programs to run off the SSD device how to do this and remove the operating system?
Greetings,
Please refer to thisarticleon partitioning and formatting a HARD drive using disk management.
Yet once, you will be able to remove the volume of the BONE and, possibly, volume HP_Recovery Microsoft disk management. The reserved 100 MB volume will likely be removed using third-party disk management software.
Do not use HP Recovery Manager to remove the HP_Recovery Partition. You remove the HP_Recovery Partition SSD , not the HP_Recovery Partition of HARD drive.
In addition, it is not necessary to remove the reserved partition of 100 MB system on the HARD drive because it is so small relative to the size of the HARD drive. It is hidden so you won't see it in Windows Explorer.
Hemdani
-
I have a few questions about the internet and partition recovery
I deleted completely OS X Yosemite and only left Windows. Now that I'm pretty sick of Windows and want to use my Macbook Air for real, I am using recovery of the internet (order and R) to reinstall OS X.
I backed up all my data and that you haven't stored anything in my Macbook. My questions are: (I know they are long, but they are quick to respond)
1. I want to erase everthing on my Mac. I have now 3 partitions. After starting and pressing command + R, I would use disk utility to erase everything, like this .
After you click Delete, would be merged my 3 partitions in 1 and I could repartition my Mac?
2. I want to create a partition for OS X Yosemite (and possibly upgrade to El Capitan). What is the minimum recommended size for partition OS X Yosemite? (Because my SSD is only 128 GB)
3. Let's say I create 3 partitions, let's name A for OS X, B for my data and C for reinstalling Windows. If I boot into Windows, I'd be able to use (read and modify) data on B, or just OS X could do that?
4 the amount of data I should download during the recuperation of the Internet? I guess that much since I'm downloading the OS X package, but my internet is quite slow, so I want to know how of SGB I have to download.
5 If I asks me to enter the Apple ID to download OS X, would any book Apple ID?
Thanks for reading. I would be extremely grateful if you answer my questions. See you soon
- 0: have backups of everything that you care and disconnect external drives except those you use specifically. While he isn't supposed to, repartitioning should always be supposed to cause a total loss of data. Corruptions can and do happen sometimes, unfortunately. Stray user commands can sometimes target bad drives for erasure or repartitioning, because errors can happen. Do not connect anything unnecessarily.
- 1: Yes. You want to create a volume of GPT partitions.
- 2: let Yosemite size and add his own scores.
- 3: using Boot Camp to add the Windows partition. With a small that disk, I might well Park out Windows on an external storage device, or use a virtual machine, and Windows as a guest. In general, add additional user-defined partitions are not general, something I recommend. Resizing and adding and removing partitions can meet with corruptions, provide for backups.
- 4: depends on various factors, including least aren't servers from Apple how busy are, and how fast your network link is. I have used to create a local installer and use it. That fact also resumed and other operations more quickly, at the price of a few $ for a drive of sufficient size. Recent versions of OS X are ~ 6 gigabytes in size, based on installers the.
- 5: any Apple ID will work, but having more than one active Apple for OS and app ID buy usually leads to disputes to find out who bought what and who can update what.
-
I have a HP 2000 2b09wm. He just broke, gives me the error message saying in that I needed a new hard drive. Suppose the old went kaput (even though I bought this pc on eBay not a month or two before). I have a new HD and a Windows 8 reinstall the software from a dealer on eBay. I tried several routes to try to reinstall the OS, resulting in many dead ends *. I asked the dealer to help, but did not get much. The last thing he offered was to remove the partitions in the new HD. I looked at a page eHow, how to remove Partitions on a hard drive. It is said to get a CD which includes fdisk.com. I burned super fdisk (2 MB) of SFbootablecd.iso and fdisk (40 MB) of fd11src.iso. I went into the BIOS to set the boot order. I put the saved first, CD/DVD-ROM internal drive and tried the two CDs. It always starts with just a screen with this:
Not found boot device
Please install an operating system on your hard drive
Hard drive (3F0)
F2 System Diagnostics
For more information, please visit: www.hp.com/go/techcenter/startupI even tried to put the CD/DVD ROM USB drive first... same results.
So my questions to you, I guess, is first of all, why the CDs fdisk is not start? I burn the evil fdisk? Second, do you know why my OS couldn't be installed using the software to reinstall? The guy I got it (http://www.ebay.com/itm/181524428825?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT) , verified_computer_specialists, has excellent comments, so I guess that the software is legitimate and the computer is actually original with Windows 8.
Thank you.
* A couple of the streets:
Compatibility report - the computer has started using the Windows installation media. Remove the installation media, and then restart your computer so that Windows starts normally. Then, insert the installation media and restart the upgrade. Do not select [Advanced ICustom] I do a upgrade. [Advanced ICustom] I install a new copy of Windows and deletes your programs and settings.
Another path to the Windows installation, I get this: select the driver to install: browse folder - access the driver and then click OK.
It gives you the list under 'Computer' which includes "CD drive (E HRM_CCSA_X64FRE_EN-US_DV5)" (resettlement software) and below, support records - sources of boot - efi --.
Simply choose drive E itself, the message appears: load a driver: no signed device not found driver. Make sure that the installation media contains the correct drivers, and then click OK.Enter the BIOS and disable Secure Boot-enable Legacy boot, save & exit. Try to boot again from the disk Win 8.
-
Windows 7 own re - install, don't delete old partitions
I'm doing a clean install of Windows 7 Ultimate (already installed, I just want to start over again) on my Dell Inspiron Mini 10 netbook.
It's a netbook without an optical drive, so I plug an external one, insert the Windows 7 disc and change the boot order in the BIOS to make it work on the first disc.
When I get to the section "Where would you install windows?", listing all them were leaving, I have my list. It includes a former OEM with Ubuntu partition, I had originally, the system reserved partition, and partition that I got the OS installed on. There is also a Volume containing the rest of the disk space that I used for data & files, etc.
Anyway, when I click on advanced, the options to remove are grayed out. It is therefore not let me remove these partitions/volumes, in order to create the space to install the OS again.
I thought that it is a problem when the installation of installation runs from the current hard drive, but I can assure you it is the start of the DVD.
Help!
www.Bootdisk.com have a number of utilities that can allow you to delete partitions
Your decision makers HD utility audit boot drive may also have the ability to remove partitions
-
Cannot create custom on the dv4-1318tu HARD disk partitions
I have the model of HP dv4-1318tu, which have 320 HARD drive. The hard drive has only two partitions (factory settings) are C280 GB) and another D20 GB), which is taken * beep *.
But I want to recreate the so-called partitions C (60 GB), D (120 GB), E (120 GB) etc. So I tried to recreate the partitions, but all the time it takes to factory settings. No option can't change/remove partitions.
I also tried to create the partition in disk management, but only 20 GB (factory settings D is coming in the shrink option)
NB. My OS is Vista Home Premium. So, how do I create partitions of customs?
Thanks a lot guys.
After you have reinstalled the operating system with the settings I could reduce the disc 50% C.
So now, the scenarios are:
C drive 140 GB
80 GB of disk D
E disk 80 GB
I think Yes drive C use unnecessary additional 80 GB and I can't shrink the C drive too.
What should I do?
-
Cannot remove Datastore ESX 3.5
Hi ESX veterans.
I am a novice using ESX, and lately I just install ESX on a new Dell server, with 6 x 450 GB configured in a Raid 5 environment. I realized that once the ESX is complete, and VI client infrastructure is installed, there will be a default data store created using all available space with a block size of 1 MB. In the latest installation of couple on older servers (which worked well), I simply remove the data store and to recreate another large block data store, so I can do a greater volume to install my OS. But this time, I get this error:
Configuring the host error: DestroyVmfsDatastore: cannot remove partition 2 on lun vmhba1:0:0
I tried looked up the forums, but none seemed suggestion a resolution in my case. (perhaps of persons using a SAN... etc, but the mine are internal HD from the server). Some said that to do a re-scan, some have said go to maintenance mode, some said re - install all the ESX Server, which I've tried all. But just can not remove this data store. Acutally, I have not "mind leaving this one data store, as long as I can create a volume larger than 256 GB it contains. Can anyone give me any suggestions? Thank you.
WingKChan
Hello Wingchan,
I don't think so that you can delete the partition your ESX Server, which is the more necessary to partition VMFS. You can delete when you have several stored VMFS mounted on your ESX. I'm assuming that the... but not sure.
However, since you have to change the size of the block. You can try the VMFSKTOOLS command to change the size of the block. Remember that you will lose all the systems of comments that uses this data store. Please move them to the secure location if necessary.
I put a link here to how to change the size of the block. (not my blog, obtained through Google)
http://techblog357.blogspot.com/2008/01/ESX-Server-35-general-system-error.html
To run this command, you must take the ESX Server console.
Thank you
Shan
-
ORA-14120: incompletely specified partition bound to a DATE column
Hello
I am constantly with ORA-14120: incompletely specified partition bound to a DATE column.
Please help me to solve it.
I have the procedure which should add and remove partitions to a table later.
I'll wrote the most important parts about it.
When it is at the part when to add the partition, I recive ORA-14120.CREATE OR REPLACE PROCEDURE Handle_Part (P_TABLE_NAME IN VARCHAR2,P_KEEP_PART IN NUMBER) IS ... S_PART VARCHAR2(49); S_PART1 date; S_CNT NUMBER; S_CNT2 NUMBER; ADD_PARTITION VARCHAR2(1024); BEGIN SELECT to_char((to_date(max(substr(PARTITION_NAME,-6)),'YYMMDD')+7),'YYDDMM') INTO S_PART FROM USER_TAB_PARTITIONS WHERE TABLE_NAME = P_TABLE_NAME; SELECT to_date(to_char((to_date(max(substr(PARTITION_NAME,-6)),'YYMMDD')+7),'MM-DD-YYYY'),'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') INTO S_PART1 FROM USER_TAB_PARTITIONS WHERE TABLE_NAME = P_TABLE_NAME; SELECT COUNT(*) INTO S_CNT FROM USER_TAB_PARTITIONS WHERE TABLE_NAME = P_TABLE_NAME AND PARTITION_NAME = P_TABLE_NAME || '_' || S_PART; IF S_CNT = 0 THEN ADD_PARTITION := 'ALTER TABLE ' || P_TABLE_NAME; ADD_PARTITION := ADD_PARTITION || ' ADD PARTITION ' || P_TABLE_NAME || '_' || S_PART; ADD_PARTITION := ADD_PARTITION || ' VALUES LESS THAN (''' || S_PART1 || ''')'; EXECUTE IMMEDIATE ADD_PARTITION; END IF; .... END; /
Someone has suggestions how to write this transformation to date in the right way?
Published by: Vili Dialis on June 22, 2009 23:41, added the text missingSELECT MAX(SUBSTR('ABCD990401', -6)) step1, TO_DATE(MAX(SUBSTR('ABCD990401', -6)), 'RRMMDD') step2, TO_DATE(MAX(SUBSTR('ABCD990401', -6)), 'RRMMDD') + 7 step3, TO_CHAR(TO_DATE(MAX(SUBSTR('ABCD990401', -6)), 'RRMMDD') + 7, 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') step4 FROM dual; --without RR SELECT MAX(SUBSTR('ABCD990401', -6)) step1, TO_DATE(MAX(SUBSTR('ABCD990401', -6)), 'YYMMDD') step2, TO_DATE(MAX(SUBSTR('ABCD990401', -6)), 'YYMMDD') + 7 step3, TO_CHAR(TO_DATE(MAX(SUBSTR('ABCD990401', -6)), 'YYMMDD') + 7, 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') step4 FROM dual;
CREATE OR REPLACE PROCEDURE Handle_Part (P_TABLE_NAME IN VARCHAR2,P_KEEP_PART IN NUMBER) IS ... S_PART VARCHAR2(49); S_PART1 VARCHAR2(30); S_CNT NUMBER; S_CNT2 NUMBER; ADD_PARTITION VARCHAR2(1024); BEGIN SELECT to_char(to_date(max(substr(PARTITION_NAME,-6)),'RRMMDD')+7, 'RRMMDD') INTO S_PART FROM USER_TAB_PARTITIONS WHERE TABLE_NAME = P_TABLE_NAME; SELECT TO_CHAR(TO_DATE(MAX(SUBSTR(PARTITION_NAME, -6)), 'RRMMDD') + 7, 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') INTO S_PART1 FROM USER_TAB_PARTITIONS WHERE TABLE_NAME = P_TABLE_NAME; SELECT COUNT(*) INTO S_CNT FROM USER_TAB_PARTITIONS WHERE TABLE_NAME = P_TABLE_NAME AND PARTITION_NAME = P_TABLE_NAME || '_' || S_PART; IF S_CNT = 0 THEN ADD_PARTITION := 'ALTER TABLE ' || P_TABLE_NAME; ADD_PARTITION := ADD_PARTITION || ' ADD PARTITION ' || P_TABLE_NAME || '_' || S_PART; ADD_PARTITION := ADD_PARTITION || ' VALUES LESS THAN (TO_DATE(''' || S_PART1 || ''', ''SYYYY-MM-DD HH24:MI:SS'', ''NLS_CALENDAR=GREGORIAN''))'; EXECUTE IMMEDIATE ADD_PARTITION; END IF; .... END; /
-
Why my USB keyboard did stop working?
Can some tell me why my USB keyboard stopped working after I upgraded my mac OS X EL Capitan 10.11.4?
Seems that Apple had broken the old apple keyboard wired usb on OS X 10.11.4. New Apple wireless keyboard worked fine.
Was not working at boot time and didn't work with windows bootcamp and did not work when started from the recovery partition, so it must be a problem with boot loader.
Reseting EPRAM and SMC has failed.
Time Machine restore to old 10.11.3, 10.11 install USB appears to only way to solve the problem.
With old 10.11 usb install, because the keyboard did not work at boot time and restoring from Time Machine backup starting 10.11.4 recovery partition broke my fusion disk partition tables. I had to manually destroy disc fusion and remove partitions on the hard drive and ssd of command-line diskutil and create new logical volume of fusion in the car and after that he restore backup from Time Machine.
Very well of the keyboard now work but lost 1 day and Windows 10/bootcamp partition in the process.
I have iMac 27 "5 k end of 2015, but I like to use wired keyboard numpad because.
-
COMPAQ PRESARIO SR5152NX, WINDOWS VISTA 32-BIT is previously downloaded from the factory.
I bought the 08/09/07. I created recovery dvd system disks when the pc was new. Never used until now. No visual
damage on DVD. First dvd downloads completely. DVD number two of two downloads at 22% and freezes same spot every time. Tried again several times. Clean the disc.
THE WINDOW MESSAGE:
File\windows\system32\winload.exe
STATUS 0XC000000F
Info: The selected entry could not be loaded because the application is missing or damaged.
(end of message)
Hard drive recovery does not work. I did a check of the equipment and it's ok.
The software seems to be the question and I don't know what's wrong if it's the dvd or
something else.
F11 does not help. Im stuck in the first qurarter of my second download program of dvd with no place to go.
I don't want to spend a lot of money when I made what was said and created the DVD early. Just wanted to use it for my
girl as a backup pc. Any help would be greatly appreciated.
Thank you
Try to start with a utility cd to remove partitions, create 1 partition and format the hard drive. I had good results with the free Partition Wizard. Download the iso CD Bootable here . Download ImgBurn here to burn the image to a cd.
When all operations with PW are done trying to start with your recovery discs again. Be sure to disconnect all external devices such as printer, etc. Just keyboard, mouse and monitor attached.
If all else fails, you can buy a new recovery media for $20 worth of HP. They are available on the page of the software/drivers for your model:
-
Windows 8 to 8.1 and prodcut key upgrade
I have a new laptop HP with Windows 8 zbook is installed. I downloaded all the drivers for Windows 8.1 and am about to take the advice of Microsofts and modernization to 8.1.
However, if I need to reinstall Windows 8 will it take the windows product key? and where would I find that? It is in any of the usual places, under the battery, on the merits of the case, inside the service door...
Flank Steak,
It depends on how you install 8.1. If you update the store of the partition recovery will be unaffected and will be kept for Windows 8.0. After recovering, you need to update again to 8.1.
If you do a clean install and reformat/remove partitions, you need to have created recovery disks or ordered from hp. These will be Windows 8.0 and you need to update to 8.1 after recovery.
8.1 there is a Microsoft feature for creating a System Image disc. Maybe what you need.
-wes
-
the computer is part of a network and works slowly, I got the upgrade cd and used to change vista to xp,
Hello Russblondin
Steps to perform a clean installation of Windows XP. You said that its an upgrade but you have installed with Windows Vista. Are you sure its upgrade? Windows XP will not install without an eligible operating system or already on the system or if you have the older operating system disc. During installation, we will give you the option to delete the partitions. If you have the data on the hard drive backed up then please delete all listed partitions. Removing partition will remove all data! This will free up all the space on the system. If you have any questions please let me know. Thank you. -
Cruzer slice 16 gb flash drive
Hi, I havce just bought a sandisk cruzer 16 gb flash drive. I went to the to use for the first time and wanted to pass a file is about 4 GB in size. When I tried to do that it came with the destination disk is full. Can someone tell me why she said this when he has 16 gb free, so 4 GB must ExacTen on?
a few things here.
first the player you have a u3? and if yes there are 2 partitions. a u3 system and the other will be a removable disk. u3 system partition is a partition protected cdrom and data cannot be written for her. You must copy your files to the removable partition.
I also noticed that you said that the record is almost 4 GB. is that one or more files? If a single file, you have to reformat it to NTFS to copy files of 4 GB or more. This is a limitation of the FAT32 file system.
Maybe you are looking for
-
At the bottom of the screen does not work on firefox. In the corner, it says "this plugin is disable. Manage plugins.All plugins are up to date and works very well. Not had this problem last night. Random events.How can I fix?
-
Toshiba 40L7335DG - mirroring without WiDi
Hello: I have a TV with available WiDi 40L7335DG.The problem is that my cell phone and android not had available WiDi. There is another method for mirroring my screen on the TV with a Wi - Fi connection? Thank you
-
Hi fellow engineers. I'm new to LabVIEW. I have a question, If I had a table 1 d of string and I want to loop my program for the same number of times (iteration) in conjunction with the number of subfolders that are generated by the function "file li
-
Please guys my laptop using windows vista premium to household use and windows is not in time on normally I can only log in safe mode... Wen he lights up normally after about 30 minutes, it remains on my desktop screen and nothing, when I click to go
-
I have a laptop 214dx CQ60. I want to upgrade the processor in it something else.
I have a laptop 214dx CQ60. I want to upgrade the processor in it something else. I read on the Internet it is possible to replace the processor too long you will find the right socket, power, processor etc. Is there a list out there which is compati