Remove the auto to replace new installed XP Pro search function, whenever I try to open transferred files/documents

Hello all him world-same advisors windows on this forum:

I thought I had posted this slight question here, but maybe on other forums of Web site...  I could not find in this forum, throughout 50 not possible pages to be sorter for the dates of entry anywhere to locate mines. So, I am apologically, submit again (if I already posted here).

I prefer my implementation of behaviors on my programmed replacement XP computer to be what I'm used to.  My old computer was XP system (do not know if a Home or Pro).  Whenever I have clicked/open a saved folder and/or its documents/pictures, etc., he immediately opened everything I wanted.  Very simple and the most privileged.

This computer has been changed by a virus (HDisc has been cleaned) and breath of capacitors (?).  I replaced this computer with a similar XP programmed order.  This computor (Lenovo) is installed with OEM XP Pro (Service Pack 3 2002).  My cleaned documents and records were transferred to this computer.  They are also on my external hard drive. All resettled programs worked / I was able to run everything as I preferred, and I know my game previous changes.

The new computor will now automatically in the search window (I got rid of this infernal animated dog) whenever I click/point on a folder and or any document in this folder.  I now do a right click to open the menu, scan down to go to search, explore, open and click on open every time I want my stuff with immediate access. I went and variously adjusted/delete/restore items separated and grouped in file search options. No effect I wanted, then it's back to the restored original basis.

Does anyone have a simple solution for a keen memory private user of documents and folders to open the first time I point to them, without having to the Group of experts through 2-3 additional steps to counter some automatic placement in a research program?

Thanks for the reply.  Method 1 as fact: click Start, control panel (click appearance and themes is not in this Panel) then you click on options files, display tabs, then erased automatically search box of files network, apply, and then click OK.  No effect.  When I click on registered (non-shared, never networked shared, in a single computer only) folder, the search engine appears and indicates to click on in the box on the left to share.  It brings up a list.

I want my file to open it in mode icon in place, what it does when I go its just clicked menu to open.

Method 2: start, press go to run, should have read clicked ok, locate items in step 2 (through the menu items open progressive as indicated), when in the value DWord, when started banging NoNetCrawling he immediately travelled to this window and in box will the number 1, which was already. This spruced up, press OK and the closed registry editor and start box.     Once again, no change in behavior.  Go back to defaul restoration, since it is the basis for me to start without jump my computer up to my forgotten violin.

Thanks a lot again.  However, responses to my question don't involve any networking computors, shared, wifi /, household D link wireless routers, office or home setting or use dial-up.  It is a computor that whenever I point to a folder, the search procedure starts automatically.  I want this behavior stopped and I want the computer to open the folder and the files it contains right now I click on it (I use the simple click).  Click and open.  Don't click, search, open.

How can I find my question?   I went to the discussion for XP, all questions and did not find it anywhere among the 50 items recently answered to.  Only it obtained pressing the issue on my e-mail address containing your answer.

Tags: Windows

Similar Questions

  • Whenever I try to open my file to muse, he tells me that I need to upgrade to a newer version of muse, but I'm updating

    Whenever I try to open my file to muse, he tells me that I need to upgrade to a newer version of muse, but I'm updating. Any ideas how to open this file? It opens on my mac very well

    Well I just closed muse and then restarted just after, tried to open the file again and works perfectly. It was weird!

  • I am using Windows 8.1 and I just installed Creative Cloud Desktop but whenever I try to open a session then sign

    I am using Windows 8.1 and I just installed Creative Cloud Desktop but whenever I try to open a session then sign

    I tried logging in and out and reinstall but still fails to connect

    Contact adobe support, http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Logic Pro 9 is compatible with El Capitan?  Since I installed El Capitan Logic Pro 9 crashes whenever I try to save all files.

    Whenever I try to save any file type in Logic Pro 9, it crashes.  Even though I am just by selecting a destination to save file.  In other words, if I click on anything in the record window it hangs.

    It is quite possible because LP9 is considered to be EOL ("End of Line would be) aka"unsupported"by Apple more... and very well may not be compatible with modern versions of OS X... on some systems.

    Choice?

    Return to a previous work of OS X and LP9 configuration using your backups... or buy LPX.

  • Why the Windows updates on new install Win7 Pro broken?

    Steps to reproduce:

    1. download Windows 7 Professional. ISO from the Microsoft link: https://www.microsoft.com/en-au/software-download/windows7

    (I also tried with the DVD of Windows 7 Pro that we bought in 2014)

    2 install Windows 7

    3. If you need to install the drivers (for access to the network) then so if open Windows Update

    4. check the updates-> > it never changed "check updates".

    I tried the installation:

    VMware ESXi 5.5 (3 x systems VMware)

    Ovirt KVM

    I left the system in the "check updates" screen for 6 days, but no change.

    Looks like the update of windows does not support regardless of the version of windows update is built into the DVD.

    Windows Update has been hit for several months.

    Here is a discussion about the Windows Update which proved effective and does not require the use of IE:

    Solution for Windows 7 updates

  • When you try to open a file of the photo to view the photo, it will automatically to the hp print model

    Original title: hpc309A printer

    In Windows 7, whenever I try to open a file of the photo to view the photo, it automatically goes to the hp print template.  It's so frustrating when I want only to view the photo.  Help, please!

    Hi MonroeBroadway,

    Welcome to the Microsoft community. According to the problem when you try to open a file of the photo to view the photo, it will automatically to the hp print model.

    ·         Did you do changes on the computer before the show?

    I'll help you with this problem. This could be a file association problem. I suggest you to follow the steps in the article and check.

    Change the programs that Windows uses by default

    When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

    I hope this helps. Let us know if you need help with Windows.

  • Leak - new black cartridge 564xl leak and doused in ink to remove the tape. (ruined my new Dockers)

    Leak - new black cartridge 564xl leak and doused in ink to remove the tape. (ruined my new Dockers - $39.95)

    No problem with cyan, magenta or yellow. purchased at the same time Best Buy XL cartridges.

    Hello

    The best solution and only recommended for you is to contact Hp Support on this issue, they will surely help.

    * Say thank you by clicking on the "Bravo!" Star"located on the left *.

    * Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your issue.*

  • Touch force constantly removes the gesture and replaces it with a straight line from the starting point to point stylus. Is this a bug? It made impossible delicate designs on iPhone 6 s more.

    More iPhone 6s and Adobe Illustrator drawing

    When establishing, too much pressure removes the gesture and replaces it by a straight line connecting the initial start of the drawing just under the pressure point. This makes delicate drawing impossible. This affects all types of brushes and occurs when you use your finger or the stylus. Deleting the app, reboot the iPhone and reinstalling does not remedy the problem.

    As long as we don't have contact with the screen and varies the pressure beyond a certain point, the gesture will be constantly removed and replaced by a straight line. This issue was present in the previous version, and in the course of December 3 update.

    Carlos,

    Thank you for reporting this issue. We have a fix for this issue will be released soon. Are you interested in helping us test the fix?

    If so, please join the preliminary program of the draw the fate by filling out this short questionnaire.

    https://www.SurveyMonkey.com/r/FTDMDX3

    Sorry for the inconvenience.

    -Draw Will, product manager, Adobe

  • After the migration to the new sshd, imovie now crashes whenever I try to open a project. All other applications are very good.

    Yesterday I installed a new SSD in my MacBook Pro 13 "unibody mid-2012 laptop computer.

    After installation, I formatted the drive, install a new copy, El Capitan, then moved the rest of my Time Machine backup.

    The computer works great, much more quickly than before. Everything works perfectly except...

    After migration, iMovie now blocks whenever I try to open a project. Every time. All other applications are very good. I even opened the original library from my old drive, opens the library of my Time Machine backup and they all down when I double-click on the icon for ANY project!

    The files are not corrupt because they have not changed. It doesn't matter which library I use, it crashes whenever I try to open a project.

    So far, everything on the Mac works fine. Other applications of Apple, everything! Please someone help me solve this problem because I use iMovie on a regular basis and have SEVERAL projects open that I can't afford to remove.

    Thank you!

    Hello Jon Tompkins,

    Thank you for using communities of Apple Support.

    If I understand your message that iMovie crashes when you try to open a project. I know the importance of your projects are as I like to use iMovie as well. First of all, I would like to check to see that iMovie will appear in your shopping list in the Mac App Store. If so, delete the app and then reinstall it.

    If this isn't the case, so do not delete the app. Instead, follow this link:

    OS X El Capitan: If an application crashes or closes unexpectedly

    Who also advises to test the problem in safe mode. This article includes the steps to start your MacBook Pro in safe mode:

    Try safe mode if your Mac does not end commissioning

    After having tested in safe mode, restart your Mac again and allow it to start up as usual. Then test the question again and see if it has not changed.

    Best regards

  • I just remdered and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  "When I try to open this file and start a new project using tha the intro file, I get an error.

    I just made and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  When I try to open this file and start a new project using tha the intro file, I get an error "the file is not a supported file or codex is not installed.  How can that be, I made the file using this program and he does'nt recognize files it creates?  Please advise... Thanks /.

    grethell

    What version of Premiere Elements you are using and on what computer operating system is running?

    You cannot import a project file (.prel) in another.

    For now, generalize choice

    a. export your Timeline (your intro) content to a file saved on the hard drive of the computer. And then import that

    file in new projects by using the new project add Media/files and folders. See publish + Share/computer/and the other

    choices here to generate this file intro for later use in other projects.

    b. you can set up what is called a dummy projects - this is a project with nothing other than the intro file. And, at all times

    you want to use the intro, you open one of these saved dummy projects and add your media sources.

    A lot of things to discuss. Please fill in some details more and then we can refine the answer for your particular situation.

    Thank you.

    RTA

  • When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens

    When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual.  What can I do to be able to open it?

    Good luck to the project is corrupted.

    Be happy, you have an auto save, even if you've lost some work.

  • I installed Camera Raw on photoshop 11 9.1.1. When I try to open a file of a DMC-FZ200 Panisonic RW2, it tells me it doesn't have this format. the specification say it does. ???

    I installed Camera Raw on photoshop 11 9.1.1. When I try to open a file of a DMC-FZ200 Panisonic RW2, it tells me it doesn't have this format. the specification say it does. ???

    Photoshop CS4? = version 11 or 11 elements of Photoshop?

    Camera Raw 9.1.1 is only compatible with Photoshop CS6 and Cloud versions. It is not at all compatible with Photoshop Elements.

    Therefore, it is unlikely that you have installed Camera Raw 9.1.1.

    That said, the Panasonic DMC-FZ200 has been supported since Camera Raw 7.4.

    Devices supported by Camera Raw

    If you have Photoshop elements 11 - which ships with Camera Raw 7.1 - check what version of Camera Raw is actually installed. Help > updates

  • I installed the latest version of Photoshop from the creative clouds and my tool work started weird type, whenever I try to use the text tool to correct a paragraph in a the entire layer leyer turns black and I don't see what I'm doing. The whole shebang

    I installed the latest version of Photoshop from the creative clouds and my tool work started weird type, whenever I try to use the text tool to correct a paragraph in a the entire layer leyer turns black and I don't see what I'm doing. Also, the entire workspace is greater and the tools of icons so that they does not fit in the screen... Any body can help?

    If your running windows make sure you have the latest device driver for your graphics card installed.  All entries must be selected and be on a black background, but you should be able to see is that the text.

  • I just installed Windows 7 64-bit. Whenever I try to open Windows Media Player crashes when opening in Windows 7.

    Just install Windows 64 bit.  New installation.  Whenever I try to open Windows Media Player or Media Center, I get a message that says that "Windows Media Player has stopped working.  Windows can check online for a solution to the problem.

    Problem event name: APPCRASH
    Application name: wmplayer.exe
    Application version: 12.0.7600.16667
    Application timestamp: 4c7dc5a1
    Fault Module name: KERNELBASE.dll
    Fault Module Version: 6.1.7600.16385
    Timestamp of Module error: 4a5bdbdf
    Exception code: c06d007e
    Exception offset: 0000b 727
    OS version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    I clicked on "check online for a solution", but nothing came.

    I tried to install an earlier version, but was not allowed to do.

    How can I solve this problem.

    Hi Nick91606,

    KERNELBASE.dll is a file system of the operating system.

    Method 1

    I suggest that you save the file on your computer and check if Windows media player works.

    (a) click the Start button.

    (b) in the search box, type command prompt.

    (c) in the list of results, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    (d) in the type command regsvr32 kernelbase.dll line press ENTER.

    (e) close the command prompt

    Method 2

    If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

    For more information please visit the link below.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Whenever I try to open a new tab in Safari, it closes in on my previous page. How should I do so that I can have several tabs open?

    Whenever I try to open a new tab in Safari, it closes in on my previous page. How should I do so that I can have several tabs open?

    What version of OS/Safari do you use?

    Try a reboot.

    Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

    Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

    Isolate a problem by using a different user account

    If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

    Safe mode

    Safe mode - Mavericks

    Safe mode - subject

    Safe mode - Yosemite

    Safe mode - on El Capitan

    Start Mode without failure-El Capitan.

Maybe you are looking for

  • Need help to update BIOS on Satellite P200D - 11L

    I have a portable satellite P200D - 11L. I have a problem recently with my FN key is not working and a few problems with my camera. My BIOS version is 1.00, and I saw that there is a version 1.2. Although I downloaded the update when I went to unpack

  • Control of Bruker OPUS with Labview

    I want to control software OPUS by Bruker using Labview, orders base such as take spectra, someone knows how to do this? Thank you

  • New HP G72 turns off at random times about once a day

    My new G72 at random times on average about 1 time per day (on a few days twice on others not at all) will turn off just the middle of me to use it. I have to wait for it to turn off completely. Then when I press the power button it will give me the

  • Found new hardware message: but no new hardware has been installed

    Why "found new hardware message" come when nothing new has been installed?

  • WAP4410n to WAP351 migration

    Hello We use the WAP4410n AP device for a long time, but it was interrupted, and now we have bought a PT WAP351 which gives me problems trying to set up the same way as I did with the 4410n. It doesn t seem to suport of WEP encryption (however I see