remove the cd or dvd

Similar Questions

• How to remove the drive of DVD of Tecra M3

  Have an old Tecra M3 which works, but had a defective CPU fan.

  Have managed to get and replace the fan, I came across a problem annoying when disassembly of the case.
  I could not for the life of get out me the DVD drive. According to everything I read the disc should come out just, but he wouldn't.

  I couldn't find anything (like a button or a screw) that it locked in.

  Anyone able to point me in the right direction (today more interest than anything else)?

  See you soon...
  KeV

  Hello

  The ODD on Tecra M3 is fixed with a screw on the lower side of the laptop. You must remove this screw first before you can remove the ODD.

  Underside, there is a latch to remove the ODD. To remove first the screw next to the latch, then slide the battery bay latch, then you are able to remove the ODD.

  Check this box!

• Satellite A60-106: How can I remove the old CD/DVD player

  Hello
  I have a Satellite SA60-106 and want to date my DVD/RW X 1 on a 8 X DVD/RW.
  How can I remove the old DVD to replace with a new one.

  Please help if you can email [email protected]

  Hi, Malcolm

  For this model of laptop, it is quite complicated because the STRANGE is from both sides. First you must remove the small screw placed in the Middle near the coverage of memory in the lower corner of your laptop (also near the cooling rack). The STRANGE is also secured with small hook placed under the keyboard.

  At the right place of this small hook is not known but I know that it is placed somewhere under the keyboard. I don't really know what you need to do. Have you already tried to remove the keyboard?

  I have to be honest and it's not so easy to give instructions here because I don't know if you're familiar with the disassembly. I don't want damage you something on your laptop. Small error can ends with a broken plastic cover. Please be careful.

• Equium A60: How to remove the CD/DVD drive

  I own an Equium A60 PSA67E and need to know how to remove the CD/DVD drive. A few days ago I tried to completely remove the underside of my laptop by removing all the screws. After doing this I found that most of the underside was loose, but the CD/DVD drive was always held in place, which means that I couldn't

  Hello

  I m not 100% sure, but I think there is a screw under the keyboard that attach the drive. You must remove the keyboard and check if there are screws that fix the drive.

• Satellite Pro A120: How do I remove the CD/DVD drive

  I have 2 main problems and doesn't seem to completely open the case.
  Does anyone know how to remove the dvd - rom?

  But my mainproblem is swith power Ribbon (blue) has come off the motherboard. But as I can't open completely the case im with tweezers for trying to recconect.

  Does not seem to want to go.
  Is there a clip into the connector on the motherboard or is it just push in? A picture or a diagram would be helpful.

  Any help would be appreciated.

  Thank you

  One question; Why are you doing this?
  I mean why you want to open the notebook?
  Always it is that Satellite Pro A120 is not an old notebook and I presume that the guarantee is valid.
  If you remove the lid of the laptop, you will lose the warranty!

  The removal of CD/DVD is very easy.
  Usually, it is fixed with a screw located at the bottom of the unit. You have to remove first, and then he should be able to take off from the STRANGE.

• Remove the drive DVD/CD-RW in Satellite Pro A120

  Can someone help me remove the DVD/CD-RW of this laptop?
  I already folded the bezel on the original disk, which I am trying to remove to replace it with a DVD - RW drive.
  I removed the screw - (reported by F6 on the plastic box - which seems to be the one & only) & the drive didn't budge. It seems a bit at loose in the case of the laptop but do not pull. Is there another screw or a clip that I'm missing?
  I got a scheme by a person I am in contact with, but it's no help. I don't want to just pull hard & break the drive excising & the laptop as well.

  Thank you.

  Hello

  I guess under the keyboard is a type of switch that needs to be released and turn off the STRANGE out of the slot. A120 is a new unit and I hope you know withdrawal of the keyboard, you can void the warranty.

  Think about it!

• How to remove the DVD ROM on the Satellite L300D 242?

  Hello

  my laptop (* Toshiba L300D 242 *) DVD ROM has been damaged and I have acquired a new and now I can not figure out how to remove my old DVD ROM and replace it with a new one... Please help me understand how to remove the old and replace it with a new one...
  Thank you...
  E-mail: [[email protected]]

  Agree with Feliks the ODD is secured by a screw hidden in the HARD drive Bay.
  So the HARD drive Bay cover must be removed to access this screw procedure is not really difficult, so you should be able to remove it easily.

• Satellite U500-12J - how to remove the DVD slot?

  I put a small DVD into the slot for DVDs.

  Currently the work of trifles: the dvd is lost into the slot, it can not be read and cannot be deleted.
  IST is possible to easily remove the whole out the small dvd dvd player?
  I'm knacked!

  I hope someone is able to help me!
  Ruby

  What Satellite you do you have?

• Satellite Pro 4260: How to remove the DVD drive?

  I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
  Does anyone know how? Is there a manual with available how?

  Thank you

  Hello

  This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
  Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
  Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
  Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

  Well, I think that it of not easy for a person without experience.
  So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

• Pro book G2: remove the cover of the HP Pro Book DVD

  How can I detach front of my DVD? The numbers on the DVD are:

  * model: GUB0N

  * fw: UB00

  * HW: B

  * type: AMCK702

  I need this group to tie it to caddy for second hard drive.

  A youtube is worth a thousand words.

  https://www.YouTube.com/watch?v=21PmIDbz_go

  Use the pin hole to open the drawer and then get clips plastic that you can push down and under the hook and remove the bezel.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Equium L20-264 - how to remove the DVD drive?

  Hello

  I try to replace the DVD drive on this laptop and removed the setscrews on the base, but he didn't budge.

  There is another screw somewhere? I know that some have their screws under the keyboard, but that would need more than one? I also have a Satellite 350 and I took it easily by removing the screws located at the base.

  Any help would be appreciated

  Hello

  Please, check here

  http://www.irisvista.com/tech/

  It can help you

• Satellite A50-108: how to remove the CD/DVD drive?

  I want to update my CD - RW drive for a dvd burner, but can't get the old drive of the laptop.
  I removed the screw on the underside of the laptop, but it won't come out.

  Do we know if there is any other screws received a way to remove the drive of any help greatly.

  Post edited by: na206

  Hello

  It's very strange that you can not remove the optical drive as DVD - ROM drive Assembly is secured with just a screw on the underside. If the screw is removed, you just pull all of the DVD-ROM drive.

  There is no other screws.

• Z500 windows touch 8 - cannot remove the CD/DVD drive

  I'm pulling the reader of CD/DVD the Z500, but even if I removed the screws now in place (and Yes, I mean ALL) does not move. I need to remove the disk to access the motherboard to replace my fan and he will just walk out. What is the problem? I'd appreciate any help or advice.

  Jocks123 wrote:

  I'm pulling the reader of CD/DVD the Z500, but even if I removed the screws now in place (and Yes, I mean ALL) does not move. I need to remove the disk to access the motherboard to replace my fan and he will just walk out. What is the problem? I'd appreciate any help or advice.

  First make sure that there is no disc in the dvd/cd drive. Then remove the single screw shown in step 2 in the image. To remove the drive, you can either push with a screwdriver as shown in step 2 (if iti is you push hard with the screwdriver and help pulling the device at the same time) or you can gently pull the optical unit, as shown in step 3.

  

• Reactivation of XP after removing the DVD drive

  I just removed my active computer DVD player. Why he told me that I have 3 days to reactivate when I rebooted?

  The DVD player is one of the pieces of equipment used to identify your computer.  Removal or replacement of this device could trigger a need to reactivate Windows.  For more information, see this article:

  "Windows Product Activation (WPA).
    <>http://www.aumha.org/win5/a/WPA.php >

  HTH,
  JW

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.