Remove the child window Parent using WIN API

Similar Questions

• MineCraft will not be displayed on the child with parental control account

  Hello!

  I saw this thread answered for someone else... can you help me?  Same thing applies, security for the family, is on the side parents but not to the connection of the child. Cruelly by a nine year old :)

  For that to work, I installed Minecraft while logged in as an administrator. Then, I changed the permissions on the shortcut to add the "child" Windows user account I created. I gave that Win User all permissions account and then restarted. After that I connected to the account of the 'child' and launched the shortcut on the desktop and it worked.

• Satellite A660-k17: can I remove the two primary partitions used for restoration?

  Hello
  I have 3 questions :) #.

  1. I burned a copy dvd recovery media, on a laptop A660 k17. There are two partitions on the disk that I think are there for the recovery. The first is 1.46 GB and it's for the recovery and another partition hidden 8.29 GB... and I think that the first contains the Recovery Wizard and the whole environment in which we will get through the repair of the system and the hidden disk contains the actuall with windows data, drivers and so on. Can I remove these two? I ask mainly on the first, if it is not necessary for the system to boot or something after that I have to recover the laptop to the factory setting.

  2 and I also want to leave my partitions so that I don't have to partition the whole drive from C 600 GB again. I have a D drive created but there is this response to a topic already in the forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64754&tstart=90
  who says that when I leave the partitions I created myself, that the recovery will be not available. I have a copy on dvd, but only to make sure no kidding something upward.

  3. when I want a clean system without some software which are preloaded on the oem recovery disk... I have to use windows recovery? or it will be the same as the toshiba one?
  Thanks for the reply possible :)
  Beautiful day :)

  > Can I remove the two primary partitions used for restoration?
  First not, but you can remove the Toshiba recovery partition if you created the recovery DVDs. One day, if you want to install the recovery image once again you can use created the recovery disc.

• Is it ok to remove the old Windows updates as I have many of them take a lot of disk space?

  I have several updates of microsoft for a few years. I am auto update, but all the old updates are still there. Is it necessary to keep or to delete to free up space. I get warnings that the computer is low on virtual memory.

  original title: is it OK to remove the old windows updates as I have many of them taking place?

  Virtual memory is used only when your physical memory has been exhausted.  This happens usually either when you have not restarted recently, or when you have too many programs running at the same time.  I suggest you reboot at least once a week and if it continues to happen, a purchase more RAM.

• adding new files or remove the old Windows Media Player files. (Vista)

  Since June 2010, I was not able to add new files or remove the old Windows Media Player files.  I can click on a new file and play using WMP or add to a playlist that is currently playing, but it does not recognize that it was added after as I close the program and re-open it.  Or I can delete the files that no longer exist on my computer but WMP always has them as my files.  When I click on add new media, it recognizes the right amount of files I would be adding, says to add them and then nothing is there.

  Your media library has probably been corrupted. To reset, follow the instructions for WMP 11 Vista at http://zachd.com/pss/pss.html#medialibrary . Note the reset of the library will make you lose all the counts to play and possibly ratings too. Tim Baets
  http://www.BM-productions.TK

• How can I remove the old Windows folder to a different drive?

  Original title: Old files Windows, Program Files, etc.

  I tried to use before Disk Cleanup and it worked, and I haven't run a complete installation.

  I'm having a problem now, this time, and I did a full install.  Disk Cleanup doesn't show any options to remove an old Windows as it did before.

  How can I remove the old Windows folder to a different drive?  I also try to remove the Program Files folder, as well as with an implementation since.

  It is showing an error message "I need to be in the Administrators group ~", and that TrustedInstaller is owner of the present.

  I have a question that "TrustedInstaller" has full authority on the file system, and 'Administrators' has limited access.

  I noticed that there are other three to make a total of four names of users who have all or nearly full access to the file system.

  Can it be fixed... it's pretty annoying to see this continue..., strictly through Windows Update.

  I look forward to your reply.

  Hi Morgan,.

  I suggest you check out the link to delete the Windows.old folder.

  http://support.Microsoft.com/kb/930527/en-us

  Note: Applies to Windows 7.

  For more information on granting permissions and the taking of property, see the links.

  What are the permissions?

  "Access denied" or other errors in the access to or work with files and folders in Windows

  Ownership of a file from command line:

  To do:
  
  a. go in > start > all programs > Accessories
  b. right click on prompt and then click Run as administrator.
  c. type the following command and press ENTER:
  
  takeown /f r d y
  
  d. to assign administrators group full control to the folder permissions, use the following syntax:
  
  ICACLS /grant administrators: F/t

  The /T parameter is added so that the operation is performed through all subdirectories and the files in this folder.

  For more information on the above commands, run these commands from a command prompt window.

  takeown /?
  ICACLS /?

  Please post back with the results and we will be happy to help you further.

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.

• Problem with remove the child to

  I have an empty clip that contains text and media for executives in a lesson called content_mc
  
  I load dynamically in a text box and then other things such as graphics, videos and other swf files...
  
  before you begin to insert swf files, it worked very well, but it was just the text on the screen, now that I have other media, it removes "randomly" children and I can't understand why it's what I use:
  
  for (var c:uint = 0; c < content_mc.numChildren; c ++) {}
  trace (c + ":" + content_mc.getChildAt (c) .name);
  content_mc.removeChildAt (c);
  }
  
  Anyone know what is happening?

  Figured it out!

  OK, for those of you who want the answer to this, but don't want to pay for it...

  I realized that when you use the removeChildAt() she removes the child of the index number... so the way I did it was like this:

  for (var c:uint = 0; c
  trace ("-" + content_mc.getChildAt (c) .name + "(" + c + "')");
  content_mc.removeChildAt (c);

  doing this, he was first to remove the child at index 0. and what made flash NOW are "slides" down an index... so the element that was at index 1 is now 0, the element at index 2 is now 1, etc... so when I arrived at the last, it would not remove it because it was no longer there...

  but change to it (instead of using the variable c, you have just put 0 in the index box):
  for (var c:uint = 0; c
  trace ("-" + content_mc.getChildAt (0) .name + "(" + c + "')");
  content_mc.removeChildAt (0);

  solved the problem :)

• Firefox process continues to run. I can't open a new session until I manually stop Firefox 32 process in the tax Manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

  Firefox process continues to run. I can't open a new session until I manually stop Firefox 32 process in the tax Manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

  Firefox is already running but is not responding

  • https://support.Mozilla.com/en-us/KB/Firefox%20is%20already%20Running%20But%20is%20not%20responding

  Firefox crashes on exit

  • https://support.Mozilla.com/en-us/KB/Firefox%20hangs#w_hang-at-exit

  Check and tell if its working.

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• How to remove the live windows messaging account without deleting messages

  How to remove the live windows messaging account without deleting messages

  If you mean Windows Live Hotmail, or Outlook.comm messages are stored on their servers, if you delete the account, you also delete the mail.

  Did you mean something else?

• What are the risks by removing the previous Windows installations when you perform disk cleanup?

  What are the risks by removing the previous Windows installations when you perform disk cleanup? Will be some things about windows 7 stop working or be affected?

  The Windows.old folder is your ticket to uninstall Windows 7 and roll back to Vista.

  If you are happy with the results of leveling, can access all your data files, all that you have transferred to the E-mail, the .old folder can be deleted.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Is it possible to blackBerry smartphones can remove the BBM5.0 when using OS5.0?

  Is there a way to remove the BBM5.0 when using OS5.0? I tried using DM6.0 but BBM is marked as a component of basic impossible to remove.

  I hate BBM in general because it is always on. I don't want to install an older version.

  If anyone can help me, thanks in advance.

  lusilveira wrote:

  Is there a way to remove the BBM5.0 when using OS5.0? I tried using DM6.0 but BBM is marked as a component of basic impossible to remove.

  I hate BBM in general because it is always on. I don't want to install an older version.

  If anyone can help me, thanks in advance.

  • with a few OSes 5.0.X.X, BBm is a basic application and cannot be deleted.
  • BUT the other OSes, the BBm 5.0.X.X became an addon application and can be removed. (i.e. 5.0.0.43 6 and 5.0.0.462)

  If you have the first category OS, I suggest you try and install BBm for example using AppWorld. Perhaps by upgrading BBm, it will become an add-on.

• How to remove the variable created when using definedNamedWhereClauseParam()

  Hello
  
  My Jdev version 11.1.1.7.0.
  
  I'm Executive where clause programatically where I need to bind two bind parameters under certain conditions. Example, I have two bind variables X, Y.
  
  Here's the problem:
  
  Assume that the first time I'm setting one variable X, so I define X bind variable and execute the query.
  
  What second time I send only Y but not X. In this implementation of the scenario of VO throw an exception, given that the variable X is already created in the VO object and where clause does not have this setting.
  
  So how to remove variables created in the original Version all in definedNamedWhereClauseParam(). I need to erase what ever the previously created variable every time I execute method.
  
  I can make the similar functionlity using setWhereClauseParam (using literals). But I have a few technical restrictions for use.
  
  Could you please help me how to remove the variable before vo using definedNamedWhereClauseParam.
  
  Caused by: java.sql.SQLException: try to set a parameter name that does not intervene in the SQL: itemNumber
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:15969)
  at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObjectAtName(OraclePreparedStatementWrapper.java:911)
  at weblogic.jdbc.wrapper.PreparedStatement_oracle_jdbc_driver_OraclePreparedStatementWrapper.setObjectAtName (unknown Source)
  at oracle.jbo.server.OracleSQLBuilderImpl.bindParamValue(OracleSQLBuilderImpl.java:4669)
  at oracle.jbo.server.BaseSQLBuilderImpl.bindParametersForStmt(BaseSQLBuilderImpl.java:3687)
  at oracle.jbo.server.ViewObjectImpl.bindParametersForCollection(ViewObjectImpl.java:22742)
  at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1298)
  ... more than 96
  
  
  
  Thank you.
  
  -Diette.
  
  Published by: Vidya Diette on February 28, 2013 08:43

  Hello

  You need access to the variable Manager. Order of reading in the JavaDocs:

  http://docs.Oracle.com/CD/E28389_01/apirefs.1111/e10653/Oracle/JBO/ViewObject.html--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableManagerOwnerBase.html#getVariableManager%28%29--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableValueManager.html--> http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/VariableManager.html#removeVariable%28java.lang.String%29

  Frank

• How to load the child table by using a simple slider...?

  How can I loa the child table by using a PL/SQL block cursor...
  
  for example, I have a table of the source called method
  
  EmpNo, empname, deptid deptname
  
  and I have 2 tables of taget... EMP and Dept.
  
  EMP
  ===
  EmpNo, empname, deptid
  
  Dept
  ====
  deptID, deptname
  
  
  Here, I want to load method for emp data and... Dept where dept does not contain data in double...
  
  For now... I used the cursor and in the same cursor, I'm loading data first dept table and then to the emp table.
  I use for dept, exceptional setting, which will manage a PK constraint violation error by doing nothing...
  
  in this way, there will be no duplicates... but it is not advisable because I 15,00,000 lines in the method table.
  
  Is there another way to do it?

  OK, I'd probably go with the method two insert, but as an alternative, here's a way to do it in a single insert:

  create table emp_info as
  select 1 empno, 'a' empname, 101 deptid, 'aaa' deptname from dual union all
  select 2, 'b' empname, 201 deptid, 'bbb' deptname from dual union all
  select 3, 'c' empname, 101 deptid, 'aaa' deptname from dual union all
  select 4, 'd' empname, 101 deptid, 'aaa' deptname from dual union all
  select 5, 'e' empname, 301 deptid, 'ccc' deptname from dual;
  
  create table emp (empno number primary key, empname varchar2(3), deptid number);
  
  create table dept (deptid number primary key, deptname varchar2(3));
  
  insert all
    WHEN rn = 1 THEN
         into dept (deptid, deptname)
         values (deptid, deptname)
    WHEN rn > 0 THEN
         into emp (empno, empname, deptid)
         values (empno, empname, deptid)
  select empno, empname, deptid, deptname, rn
  from   (select empno,
                 empname,
                 deptid,
                 deptname,
                 row_number() over (partition by deptid order by empno) rn
          from   emp_info);
  
    8 rows inserted
  
  commit;
  
  select * from emp;
  
       EMPNO EMP     DEPTID
  ---------- --- ----------
           1 a          101
           3 c          101
           4 d          101
           2 b          201
           5 e          301
  
  select * from dept;
  
      DEPTID DEP
  ---------- ---
         101 aaa
         201 bbb
         301 ccc
  

  You must test these two methods to see which is more efficient.