Remove the old hard drive's "system Reserved" partition

Similar Questions

• How to remove the old hard drive files. Can not defragment

  Not enough space to defragment.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive. In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc. These files can be compressed or not compressed. If compressed text the name of the folder appears in blue. If these files are not compressed you can compress. Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space. On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

• try re-installing CS5 on a new hard drive... I forgot to remove my CS5 on the old hard drive... I have the CD of installation of CS5... I've updated from CS3 and have two serial numbers

  try re-installing CS5 on a new hard drive... I forgot to remove my CS5 on the old hard drive... I have the CD of installation of CS5... I've updated from CS3 and have two serial numbers...

  I use a PC...

  Please check Adobe - Creative Suite 5 Master Collection: System requirements and try to install the product, please let us know if you are unable to activate. You can check: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,

  I hope this helps.

• How to transfer files from the old hard drive to a disc new hard, old hard disk has been removed?

  I had a hard disk going bad. Installed a new hard drive and the need to transfer files from the old hard drive. I have an external enclosure for the old hard drive and can connect by usb port.

  The process is fairly simple once you put the old drive in the external box. You can use the usual methods of copy and paste in Windows Explorer. If you copy files, complete folders, you can take a look at RichCopy.

  http://TechNet.Microsoft.com/en-us/magazine/2009.04.UtilitySpotlight.aspx

  Tom Ferguson

• Old computer is dead, HARD drive still alive. Can I install windows 7 on your new computer without formatting the old HARD drive?

  My old desktop computer recently died of a motherboard failure.  As I understand it, I should be able to install windows 7 from my old computer to the new, but only if I delete the old installation.

  Does this mean that I have to format the old HARD drive?  Because the old computer HARD drive seems to be alive, I would retrieve the data on a new machine first, before I have to format and I need to install windows on the new computer to get the data from the old HARD drive.

  No, it is taken on trust that the old installation is no longer active, there is no mechanism to remove the old license in order to make a valid new. Remove the Windows directory (or rename) makes the old system inoperative.

  You find that the automatic authentication fails on new construction and need to call the licensing Center to check that you have only one installation. Apart from the OEM rules if a license has been activated too often, and recently, it fails in a 1 time.

• No access to users on the old hard drive

  I have a weird problem, I can not access my /Desktop documents/photos/music on my old hard drive files and, basically, all that is in the / users.

  I tried to change the permission settings but I can't make it work and sometimes it says I don't have permission to change, it's so weird because I can access other things which is just placed on the hard drive and not on / users. I just upgraded my computer and put this hard drive but I run my operating system on an SSD instead, I tried to plug the old hard drive but it does not work it restarts just when it starts to load windows.
  It feels as if I have to hack my old hard drive in a way to make it possible to access.

  Thank you!

  Hello

  1. you receive an error message/code when you try to access the files on your old hard drive? If Yes, what is the full error message?

  2 were there any hardware or software changes made on the computer before this problem?

  Do the methods and check if it helps.

  Initially, a virus using Microsoft Safety scanner scan and check if the problem persists.

  
  Method 1

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

   

  Method 2

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 to reset the computer to start as usual after the boot process.

   

  Let us know the status of the issue.

• Retreival of data from the old hard drive - it freezes the computer when it is connected to the outside

  I have a dell laptop and last week he showed the blue screen and does not start. I got improtant data on starting I have is not a format and replaced with a new hard drive. Now I'm trying to connect to the old hard drive externally detected only D & does not detect drive C on what it blocks my laptop. I tried with other laptops & systems also, but it's the same thing. I have important data in two players. Please suggest a possible solution to recover data.

  Hello

  • What is the blue screen error message that you receive?
  • Have you tried plugging the drive with another computer?
   
  You can check this link:
  http://support.Microsoft.com/kb/322205
   
  You can also try updating the chipset drivers on the manufacturer's Web site.
   

• Cannot copy files from the old hard drive to new

  Original title: crash and recovery of hard drive problem

  My hard drive crashed it wouldn't boot saying config.sys is damaged or corrupted, I tried to fix it but the sector is damaged. I was using XP, I had a password on my settings. I installed a new hard drive and reinstalled windows XP, but even if I can 'see' the old hard drive (always installed) I can't access my documents, how can I get to them? I know the password but since its an account on another drive it won't give me the chance to log on to the account.

  Assuming that you use the Encrypting File System (EFS) then this article should solve your problem:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• How can I move the old hard drive to new programs.

  I tried to upgrade Windows 2000 Pro, XP Pro on my hard drive. XP would install, but would break to the BSOD with a STOP of the F4 code. BCupdate2 says that the startup code is up to date. NTDLR and boot.ini and NTDETECT.COM are present on the old hard drive. After 2 days of searching and trying different solutions, I bought a new hard drive and installed XP Pro top. System is now running. I want to make my programs from the old hard drive to the new hard disk as well as shortcuts, system settings, user accounts, and user data. I want the new HDD to resemble the old hard disk would look like had XP installed successfully. I have a utility provided with the hard drive, but it says it will take the BONES of the old drive and put it on the new drive that would make my non-operational system. Any help? The history of the old drive is 64 XP was installed originally, but some of my programs wouldn't not below so I installed Windows 2000 Pro. Which was great for several years, but the new versions of the software I use has stopped running less than 2000.

  I'm sorry, but it is not possible to move programs from one operating system to another.  You must reinstall the programs.

  Your data files must be in the Documents and Settings\ folder from the old hard drive and you can copy them to the folder on the Windows XP system.

• copy the data from the old HARD drive to a new HARD drive

  have old hard drive with data and op sys - must copy old hard drive data on the new hard drive WITHOUT copying op sys

  a simple way is the best way.

  Help, thanks

  Hello

  1. purchase a USB hard drive enclosure to put the old drive hard in > plug it into the new computer.

  Here is a video on how to do it:

  http://www.YouTube.com/watch?v=SLLQusrmzvI

  2 slave the old hard drive in the new computer, so a new office.

  http://www.WikiHow.com/configure-master-and-slave-in-BIOS-for-two-hard-drive-disk-in-a-single-system

  See you soon.

• Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

  ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

  I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

  Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

  You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

  This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

  Here is an example of the type of device, I suggest:
  http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

  You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.

• My motherboard has exploded and I have the hard drive. How can I copy the address book for a new installation on a new computer from the old hard drive?

  I have the old hard drive in a USB enclosure and connected to the computer again. I have installed firefox and you need to have the address book (critical) copied and inserted information from address book on the new computer. I hope that there is a file I can replace easily?

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  https://support.mozillamessaging.com/.../home
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• Find bookmarks and passwords on the old hard drive

  I watched an attempt all suggestions re. This and cannot locate my favorites and passwords on the old hard drive.
  Hard drive is still connected to my computer, even if the PC had a mother brd, the CPU and the RAM upgrade: because of the upgrade failed to load window, if the Windows file is always available. New HARD drive with windows installed, install again. 11.0 ff. The following search suggestions, I find the new profile, but not that of the old drive. I can access my Mozilla folder in Program Files (x 86), but are now looking for appdata etc.
  Yes, I know, it was really stupid to not save this kind of things before the installation of new equipment, but do not think that the material change was hose go my W7 install so bad. Thanks for any help in advance.

  AppData is a hidden file, you need to enable hidden files and folders may be to find. http://www.bleepingcomputer.com/tutorials/how-to-see-hidden-files-in-windows/.

  After finding the appdata folder, read https://support.mozilla.org/en-US/kb/Managing-profiles and recovery of data from an old profile.

• replace the old hard drive with nine in Pavilion dv2019tu

  my laptop had toshiba 320 GB hard disk that does not work, then I want to install a new hard drive to it, will this model support 1 TB HDD?, and what is the maximum ram it can support?

  Please quick answer, I do not have any other pc to continue my work.

  Your Service Manual:

  Manual

  Max Mamory is 2 GB. I'm sorry.

  AMD model series versions has been reported to have difficulties even with hard drives of 500 GB. There has never been a logical explanation. Since it is SATA it must accept any drive SATA 2.5 inch width 9.5 mm thick. However, the reports were many and not lightly ignored. I can not find plug on the dv2019tu so if it has an Intel processor, I would say that you're good to go with a 1 TB SATA drive, as long as it is not thicker than 9.5 mm. Also pay attention to the connecting piece plastic on the old hard drive. It is necessary to connect the SATA ports on the drive to the motherboard. You have to use it again.

• Vista activated on the old hard drive hard disk failed to load to the new disk hard wont let me enable

  Vista activated on the old hard drive, failed loaded hard drive vista Ultimate edition on the new hard drive, but do not let me activate. This is a saved copy and use the product from the back of the disc that contains key

  Hi Tony,.

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  You can go through the steps in the link activate Windows Vista by phone activation.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.