Remove the screen wireless preferences

I feel an unusual event, whenever I turn on my Sony TV/Soundbar. My MacPro is starting to switch back to the search/find the TV/Soundbar. It is not connected to the CPU, but seems to connect wireless. I have a Harmony remote, but it seems that is not the issue. When it is powered either product from Sony on the MacPro discovered / loses his. What TV/Soundbar are switched off Mac works fine. Ultimately is there a way to remove the TV from the preferences? I turned off Airplay-took the Apple TV off the harmony remote, etc. but no bueno. Genius Bar said it must be my graphics card, but is it doesn't not connected why would it cause? Any help would be appreciated.

What model Mac Pro?

If not 2013 Mac Pro so what graphics cards?

Do you have any application that interacts with the TV?

What specific TV and the Soundbar?

Like in Mode safe?

Try safe mode if your Mac does not end commissioning

Tags: Mac

Similar Questions

  • Portege M200: How do I remove the screen to clean behind?

    I literally (little bug) bug that crawled up behind the screen on my M200, who died later - pixels so rather than dead, I have a bug dead - is there a way to remove the sensitive screen to clean behind it and replace it without damaging it?

    Nev

    Hello

    I t is recommended to remove the screen and open it.
    The screen is one of the most expensive parts of the laptop.
    If you have no experience in such proceedings it is possible that you may damage the entire screen.

    However, I think the screen is fixed with screws that you will find the image of the screen. But in your case, I recommend contacting the service to remove the dead bug.
    The guys have more experience and can remove it more quickly.

  • Remove the screen bezel on a G575

    I removed the two screws under the rubber covers on the lower left and lower right of the screen, but I'm still not able to easily remove the screen bezel my G575.

    I try to be as gentle as possible to avoid snapping the plastic. Are there special techniques for this?

    See you soon

    Turns out that following the instructions for a G570 works very well.

    There are detailed at the bottom of this page video:

    http://screensurgeons.mybigcommerce.com/Lenovo-IdeaPad-g570-laptop-led-screen/

  • Remove the screen on the menu Manager, click

    Currently I have a screen, the user can bring up the menu and select an option that displays a series of buttons in a fieldmanager.  It works very much like on click menu create and add buttons to the Manager then the screen.  I want to do now is if the user selects an option in the menu to delete the buttons I'd remove the screen Manager.  I'm trying to do the following (taken from another thread)

       private MenuItem _hideGraph = new MenuItem("Hide graph",110,10)
        {
            public void run()
            {
                try{
                    UiApplication.getUiApplication().invokeLater(new Runnable(){
                        public void run()
                        {
                            synchronized(UiApplication.getEventLock()){
                            delete(gridFieldManager);}
                         }
                     });
                }catch(Exception er){
                    System.out.println(er);
                }
            }
        };
    

    A mistake is not printed, but made a mistake.  Is it possible to remove the handler in this way?

    initialize in the constructor of your display manager, for example. Another option would be to return, but I prefer the first one for a better overview.

    in your case:

    declare the handler as a class variable in the class of your screen. initialize it in the constructor. Add and remove it from your menu methods.

    a general Council: instead delete, you can use replace. at least if you use several insertion/removal routines you can lose the correct index quickly, and if you add a field then rewriting half of your code. for this reason I use a NullField who is not active, I add them to the places where I want to dynamically insert managers.

  • Remove the screen "Welcome" (iMovie 10.1.1)

    I managed macs in a University laboratory.  iMovie is a popular choice for students with no experience in video editing.  If students do not start their project by creating a new library, their projects will be erased when disconnecting.  I had been teaching students to key press 'Option' launch iMovie so that they will be immediately asked to create a new library.

    Since the iMovie 10.1.1 update a welcome screen appears and upset my workflow 'Option '.  Now students either have to hold the Option key while clicking through the double welcome screens, or use file > open library > New.

    Anyone know of a backdoor to disable or remove the Welcome screen?

    10.1.1 has not changed how iMovie opens. The only time where you see the home screen is the first time you open the application, or if you removed the preferences. I guess it is related to how your lab is set up. It seems that when each student open iMovie, they are considered as a new user. You have the application on each computer or what they download it from a server? Each user has his own account. Cannot offer many suggestions not knowing about the configuration of your laboratory. But I would look into the way in which the lab is configured as probably the cause of your problem. Normally, iMovie 10.1.1 will open with the button option button in a window to select a library to open it with a button at the bottom to create a new library.

  • How to completely remove the add-on preferences?

    "Toolbar buttons" extension buttons are displayed incorrectly (buttons in white). Reinstall it also restores the old settings with missing icons. How can I completely reset the extension data and preferences without resetting the other settings of firefox? (I tried to manually remove the file extension too - same result).

    [firefox v33.1.1]

    If you open the topic: page config in the toolbar url and the search for the name of the old addons, you can remove entries from there.

    Also try the Firefox Menu, and then clicking Customize. From here you can drag the icons off and it can record without addons

    If this does not work, there is also a possibility of passage of the profile to another. Backup and restore Firefox profiles information

  • Satellite M35 Pro - how to remove the screen bezel?

    Hey everybody,

    Please help me, I was able to disassemble the computer laptop everything and now I have the screen and the top cover out as well. I don't know how to remove the display frame to remove the hinges.

    Can you please help me with this!

    Thanks in advance!

    Hello

    Well my friend, in my opinion you should not try to disassemble the laptop if you n t have the necessary experience and don t know to do this!
    You could damage other parts that you know

    You're stuck on the LCD mask?
    As far as I know the LCD mask is covered by two screws that are hidden under the joints.
    You will need to remove both seals of mask LCD, and then you could remove the two screws hidden under the seals mentioned.
    Then, you could put your fingers between the mask and the LCD screen in order to release the LCD mask plastic locks.

    But note; Be careful, don't use any force!

  • Tecra M5 - how to remove the screen hinges

    Hello

    I need to replace the hinges of the screen (well one of them anyway)
    I have the manual maintenance and computer in bits.

    The manual says "Disassemble the hinge (left) while drag and spin it.", but no matter how hard wiggle/slide/tour that I can't get out.

    Same problem with one of the other side.

    Someone has it already done this and have any advice or know of an educational video somewhere?

    TFAI

    Hello

    To my knowledge there is no textbooks that would show you how to disassemble the unit. Such dismantling manuals are made for the Toshiba service guys.
    Then maybe you'll find some tips and tricks on YouTube or would need to contact a Toshiba technician to remove

  • Satellite L650D - after removing the error wireless security Norton occurs

    I deleted Norton security center today that it had expired, and now I get this error when connecting to a wireless network. It is said that he has limited the network connection, when I run it it says cannot resolve the error and advanced details of diagnosis gives me this message.

    "Windows could not automatically bind the ip on the network card protocol stack.

    I tried to update the driver and the system restore.
    Any suggestion would be appreciated

    Data sheet:
    Satellite L650D
    Broadcom 802.11n wireless network adapter
    Windows 7 Home premium 32-bit

    Hello
    There are different reasons for this.
    Someone wrote that the ZoneAlarm firewall could block the wireless network adapter.
    In this case, I would recommend removing the system Zonealarm.

    Another said that he could solve this problem by unplugging or resetting the router.

    Also try to disable the wireless card in Device Manager.
    Then restart the laptop and activate the card LAN once more.

    Good luck

  • Ho do I remove the screen of my Equium U400?

    My Equium U400 requires withdrawal of screen I need to replace the broken Ribbon. I can get the frame surrounding the loose screen, but the lower part of the image seems to stick because of the hinges. I tried to remove the screws on the underside of the laptop under the hinges, it seems to loosen their but the screen won't come easily away. I don't want to force and breaking so thought I would ask some advice.

    Any ideas?

    Hi mate

    Disassembly of the laptop is always delicate _and if you have no experience, you should ask someone for assistance. _

    On the pages of Toshiba, you will find not all manuals that might be useful to disassemble the laptop, it seems that these manuals are not for public use, but only for the people of the ASP.

    You will need to look in the internet for useful pages.
    I found a page irisvista.com there are many images useful and instructions

    Good luck

  • IMac, remove the screen and use your Apple TV

    I send my iMac screen 2011 for repair.  I would use my Apple TV mirrored my iMac screen {(aucun écran LCD installé) to a HD TV while my screen is out for repair.} Is this possible?  Or not because I have to be able to see "Air" on my imac to get there and Play with no screen is not possible?

    If no it can't do so what buying a mini port for cable HDMI and running 'mirror' to an HDTV with the iMac screen removed?

    Basically don't want to be down while the screen is out for repair

    Thank you

    Mike

    I don't think that your iMac will start without the installed screen.

  • How to remove the screen magnifier?

    I have mobilized the screen enlarger and I now want to remove it.  I can't find a way to eliminate it to come when I start my computer.

    To turn off the Magnifier

    1. go in Control Panel
    2. double-click on accessibility
    3 make your computer easier to see, click on the link "make the computer easier to see.
    4. on the brand of the computer easier to see, under "Do things to the bigger screen", uncheck "turn on the Magnifier.

    5. click on 'Apply' and then 'save '.

    I hope I could help

  • difficulty to remove the network wireless to my laptop

    Hi - I'm unable to remove the network my laptop wireless. I have windows Vista Home premium on a Dell Inspiron 1525. I need to delete the list of wireless network in order to re - install (due to changes to the security settings). When I try to remove it, it disappears, but then within 5 seconds it appears again, like a ghost in my computer. Help, please

    Perhaps, he keeps coming back because you're connected to the Internet.

    I assume you mean: network and sharing Center, manage wireless networks, one of the networks on this list, your right you click on the network and clicked on delete network.

    Well, if you click Properties, you can change the security settings.

    If you were logged on to the disconnected from the Internet and then you can remove it and if it works you will see it come back.

    But he will always be there even if you don't see it.

    To remove it completely connect to the Internet with another connection, not one you want to delete.

    Open the network and sharing Center click on customize, click on merge or delete network connections, select the connection that you want to remove and click on delete. This removes the registry.

    If you are unable to connect to the Internet to do this follow these steps:

    Press the Windows Logo key and the R key to open the run.

    type: regedit, click OK

    Navigate to: HKLM/SOFTWARE/Microsoft/Windows NT / CurrentVersion / NetworkList / profiles

    Click on one of the profiles below to view on the right side. Look at the name of the profile to make sure it is the right one.

    When you see one you want to remove a right click the highlighted one on the left side and click on delete.

  • When I try to use the uninstall of norton, the option of removing the screen fills the screen

    When I download the norton uninstall kit, hit run, the screen what the kit removes the States is so great, the other, cancel have no buttons. How this can be reduced. I am very frustrated with this process!

    And the reason why you post this complaint here, rather contact the leaders of this "uninstall Norton Kit" is?

  • remove the screen keyboard and microsoft Narrator option we at startup

    How to remove on screen keyboard and microsoft Narrator that appears when you start windows vista? I tried to uncheck the option, but it still seems.

    How to remove on screen keyboard and microsoft Narrator that appears when you start windows vista? I tried to uncheck the option, but it still seems.

    Start button > Control Panel > Classic view > accessibility > use the computer without a display > uncheck "Turn on Narrator" > Apply > use the computer without a mouse or keyboard > uncheck "Use Screen keyboard" > Apply > save

    t-4-2

Maybe you are looking for

  • BOOTMGR missing Satellite C660

    Hi people, I have the Satellite C660Initially, I had a virus and tried to reinstall windows, but not good.When it came to the point of saying there was not enough space on the windows installation disc,I realized that I had forgotten the bit score. N

  • How can I get pages to fill my new LCD monitor? some do, some still too square and not as a landscape.

    monitor is completely filled with some screens and not on others, similar to differences in format on widescreen TVs. Why and which attaches? == new monitor, I just CRT LCD

  • How can I activate my wireless phone?

    wireless connection problems HelloMy without wire was recently turned off due to an internet connection slow and done nothing and I want to turn it back on, but I'm not sure how to turn on my wireless.I have windows vista and a d-link wireless router

  • Series of summation of Sigma in Sql

    HelloI'm trying to code in a series of Sigma (summation) in a SQL to Oracle (as opposed to pl/sql). I don't know if it's possible? I can't find a feature in Oracle that would give me this.I am trying to model ∑ p (1 + r) ^ IFor the series I = 0 to n

  • How to add routing Configurator or mask change

    Helloconfiguration the value My mask to 255.255.255.0, but my DNS server is 255.0.0.0. For it can not find - How can I change le 255.0.0.0 255.255.255.0 in the Horizon Workspace or add routing.IM beginner.Thank you.