Remove the table for a photo table control framework

Hello

I need to create an array of 2D images. Due to the large amount of elements in the array, the width of the image is reduced to a minimum. However there are still a considerable gap between the 2 adjacent elements in the table (see the attached example), which is caused by the picture in the image control.

I tried to affect the color of transparent photo frame, but even if it is invisible, it is still there. I tried to customize the control too, but I couldn't find a way to remove the framework (for classic and modern styles).

(BTW, for the control of classical style, there is an option without color box control framework, but no option for 2D image control.) I need model/photos inside the element of control 2D image, so simple color 1 color box is not enough)

Could someone help to suggest a way to remove the frame and optimize the density of space in the table? Thank you much in advance.

PJI

Hello, PJI,.

You should be able to define the lower field in the area of the image of the control.

-Right click Control and choose "Advanced Properties"-> "Customize.."

-To the editor change order to 'Edit Mode'

-from the menu, click on 'Window'-> 'display the parts.

-In the part window, select the frame

-set new values for top, left, height, and width, so that the image is behind the area of the photo

I hope this helps.

UliB

Tags: NI Software

Similar Questions

  • The table control does not correctly...!

    Hello

    I put a table on the front of my application control. The problem is when I load the file containing the data on it, the data gets overlaps that existed previously in the table control. This problem remains with 'reset default' invoke node as well. I noticed that this problem persists in some PC while on others, it works well. Is there a permanent solution for this?

    Hi mnx,.

    What happens when you write a matrix constant empty in one of the table instead of "Reset default"?

  • Get the current index value of the table control

    I have a table control 1 d on a panel that contains a value of temperature curve that I send to a temperature controller. The values in the table are not unique, because for example 40.5 degrees in the table could represent 40.5 degrees on the cycles of cooling or heating. I could have severat heating/cooling cycles programmed into the table. I would like a way to read the array index of the currently displayed item in the array in the up/down control of index on the left of the table control. I could then run curves partial temperature easily by neutrophilia a starting point on the curve in the table control.

    I don't see a property that I can use to get this index value. Anyone have any ideas?

    Thank you

    J

    Use the property 'index values. It will be the first item of the output of a 1-d array.

  • Remove the Table created in the forms - IOM Designer

    Dear all,
    Is it possible to remove the Table created in the form designer?

    The Recycle Bin icon is disabled in the console of the design.

    Thank you for your help

    Restore the database.

    This is an instance of dev is for. :)

    Best regards
    / Martin

  • CVI suggested help update on 'programming with the Table controls.

    Hello

    May I suggest adding a sentence to the chapter 'Programming with the Table controls', 'Creation and deletion of cells' section help of CVI.

    After the sentence "use the following functions to control the number of rows in a table control...". "I would like to add a suspicion that the number of lines is also affected by (programmatically) adjustment of the height of the table.

    Now that I've discovered, it's obvious ;-)

    Hi Wolfgang,.

    I think you might be misunderstanding this sentence in aid. It does not refer to the size of the table, in regard to the number of lines go in the table. It is in fact the number of real lines exist in the table. And the total number of rows in the table is absolutely not affected by the height of the table.

    Luis

  • I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

    I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

    I have not tested, but it should work with Lightroom:

    http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

    Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.

  • Hi Folks, I'm ready to go with the versions of CC of LR and Psalm I currently use Apple products and the iCloud for storing photos, they stay on the iCloud or do they need to go to a related version CC?  Also, I guess that versions CC of LR

    Hi Folks, I'm ready to go with the versions of CC of LR and Psalm I currently use Apple products and the iCloud for storing photos, they stay on the iCloud or do they need to go to a related version CC?  Also, I guess versions CC of LR are Mac compatible.  Can they go on several devices, the cloud itself, including mobile devices like the iPad?  Thanks a lot in advance, Dave.

    You can have your photos on iCloud without any problem.  Lightroom CC 2015 is compatible with mac, please check system requirements of Lightroom CC 2015. You can install Creative Cloud on 2 machines, however, you can't use both the at the same time, the control 1:1 point: http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf

    You can use Lightroom for mobile or your ipad and iPhone. Please check Adobe Lightroom for mobile FAQ

    I hope this helps.

  • laptop resets date and time back to factory on each reboot. Also removes the drivers for the cards and the outlook settings.

    Machine removes the drivers for the wireless card, also changes some settings in outlook after each reboot.

    Hi Jim,.

    You could try replacing the CMOS battery, as it appears to have failed.

    http://www.computerhope.com/issues/ch000239.htm

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

    No Option to install repair - SAD

    Hello

    Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

    I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

    As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

    Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

    -Todd w.

    "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

    «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

    As Todd, is the answer.

    "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

    Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

    "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

    It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

    If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

    Another possible place you could make suggestions which could see the developers would be:

    https://connect.Microsoft.com/default.aspx

    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Funds/wallpapers don't fit down to the size of my screen after removing the Dreamscene for Windows 7 64.

    My screen/origins don't fit down to the size of my screen after removing the Dreamscene for Windows 7 64.  I ran a 32-bit uninstall reg. by mistake and now larger images appear only partially filling to the top of the visible area of the screen.  I have a laptop of Toshiba A505 displaying 1366 x 768 with Windows 7 64. Does anyone know the registry tweaks on how to solve this problem? Thank you very much.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

    I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

    Too generic a question, can you clarify considerably more for us? Your question could be reformulated in the following way and always be true?

    "I can't start my computer once he has had a BSOD. Something overheated, but I don't know. I removed the CMOS battery and replaced in order to asure me that a bad overclock on a core component has not caused the problem. Now, it restarts correctly, what is / was the problem? »
    The foregoing, what I thought you meant. The above statement is correct?
  • GPF using the Table control

    Hello world

    We use a table control to display the log files. Each row of the table represents a log file entry. In addition to that we have put in place

    Some filter chopsticks (string tonalite) to speed up filtering. This means that only the entries corresponding to these substrings are shown. So whenever the filter options

    changed to renew the contents of the table.

    This is done by DeleteTableRows, looking for entries to display, InsertTableRows and SetTableCellRangeVals.

    It works very well.

    But if we remove all the contents of the table (caused by the filter options) and then hit a button (even if the focus is on the table) you get a GPF on ProcessSystemEvents.

    This occurs only after inserting a large number of rows in the table before deleting all the. For example, a table with 5000 x 2 (rowsxcolumns) reduced to 0x2.

    1 create a table with 5000 x 2 (rows x columns) control elements.

    2 remove all lines

    3. press tab until the control panel to get the focus.

    4. hit Enter for example

    => Crash

    Someone has an idea? We have already 'dimmed' CTRL, but this is not enough to avoid that the focus on the table by pressing the tab key. So, which leads to an accident as well.

    Thanks for the help

    Philipp

    Yes, it is a known issue (396240), although it is not actually on time last updated known issues. Unfortunately there is no good solution, other than just by waiting for a version corrected to be released, which should happen soon.

    Luis

  • the table control

    Buenos dias,

    Estoy utilizando datos event Structure en UN para put a control array. In the case of the mouse towards the low selecciono fila in the that wants to start a write y borro los datos can fila to esa en haber, despues voy introduciendo data in case key down? y convirtiendolos uppercase. Paso una fila a otra mediante the tecla return.

    En problema esta en una vez escrita TR the table return a revisar los datos, fila seleccionada con el raton is borra como debe hacer. Pasar al has the following fila don't return con los datos than habia is only became pero al write again no be borran y me appears los antiguos mas los nuevos datos.

    How puedo hacer what borren los datos al volver a write sin tener as suprimir each of characters?

    A greeting

    Hello

    I can solve my problem using Listbox.

    Here is an example of how you can do.

    Thanks for the help

  • Remove the table if the value not in APEX_APPLICATION. G_f01?

    Hello again!

    I have an apex_application.g_f01 that contains the values in the boxes, now I want apex to remove rows from the table that contains values that are not present in the G_f01 (what are disabled) on submit.

    I can't understand the sql code to do this, could someone give an example?

    This can be a simple thing, but I'm getting confused a lot with sql, maybe because I just php and java.

    EgaSega wrote:

    I have an apex_application.g_f01 that contains the values in the boxes, now I want apex to remove rows from the table that contains values that are not present in the G_f01 (what are disabled) on submit.

    I can't understand the sql code to do this, could someone give an example?

    This can be a simple thing, but I'm getting confused a lot with sql, maybe because I just php and java.

    One possibility would be to create a collection of APEX containing key checked values and use that as the source of the lines to be kept in the SQL delete. Something like:

    begin
    
      apex_collection.create_or_truncate_collection('CHECKED_VALUES');
    
      for i in 1..apex_application.g_f01.count
      loop
        apex_collection.add_member(
            p_collection_name => 'CHECKED_VALUES'
          , p_c001 => apex_application.g_f01(i));
      end loop;
    
      delete from t
      where not exists (select
                           null
                       from
                            apex_collections c
                       where
                           collection_name = 'CHECKED_VALUES'
                       and c.c001 = t.id);
    
    end;
    
  • How to remove the Tables of HFM Application in SQL

    Hi gurus

    1. how to remove the HFM Application Tables in SQL?
    Its manual removal but each application having 120-150 tables? How to do this in one fell swoop?

    I deleted some applications using the workspace / shared services, but still its display under HFM under the Tables of SQL Server.

    Please help me

    concerning
    Smilee

    Hi Smilee,

    1. If the application opens in the web management interface, go to Taskflows management module and make sure that no taskflows exist yet for this application. Remove any existing taskflows.

    2. If demand exists in Shared Services, right-click on the demand for Shared Services and try to remove the application from here

    3. stop Hyperion Shared Services and all the Windows of financial management processes and backups of the relational database of the two patterns.

    4. check the relational database of Hyperion Shared Services repository, in the "ces_apps" table and make sure that there are no lines containing the appname "EXAMPLE." If the line still exists you should enlist the help of Oracle Global Support software to clean Hyperion Shared Services before proceeding.

    5. it is possible to remove all content removed from the relational database of financial management application. Must be very careful when handling manually tables database that permanent damage can be done at the application and other applications if the wrong content is removed.

    (a) first remove all tables, indexes, sequences, and the package objects that begin with the name of the application
    (b) remove all tables starting HSV_appname_xxxxxx
    (c) remove all rows in tables referring to demand HSX_CLUSTER_xxxxx.
    (d) delete all the HSV_ACTIVITY_KILL_USERS, HSV_ACTIVITY_NO_ACCESS, HSV_ACTIVITY_SESSIONS and HSV_ACTIVITY_USERS and HSV_USERS_ON_SYSTEM lines that refer to the name of the application.
    (d) remove the line containing the name of the application from the HSX_DATASOURCES table.

    6. the next time that all Hyperion services are restarted, the application must be removed safely from Windows client.

    You can contact your DBA to write a query on how to remove it.

    Hope this helps,

    Thank you
    Charles Babu J

Maybe you are looking for

  • How to bring back my drop-down bookmarks menu?

    I use to have a drop down menu for my favorites set up above my bookmarks toolbar. I think it's the menu bookmark management. How can I get that back? His sudden disappearance has frustrated me enormously, and I would very much like it back. I prefer

  • Administrator account has been disabled and cannot connect at ALL.

    I own a 'HP G71-340US Notebook running Windows 7"and I'm trying to restore my computer completely (for delete). Then at some point when I turned on the computer a few days ago, it took me in the Recovery Manager, I couldn't do anything. I try to rest

  • Why FCP is not create backups?

    All of a sudden the backups are not created. It is on a new machine. It was their creation on my first two projects. Now, it is not the case. Any ideas? Thank you Tom

  • STATUS BAR

    My status bar (I think that's the name), is generally down vertically. All of a sudden it's on the right horizontally. How can I get this back where it belongs?

  • Cisco Secure ACS groups 5.1 Active Directory and RSA Authentication Manager 7.1 for profiles

    / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0