remove the troubleshooter in Microsoft Malware prevention

Similar Questions

• How to remove the FBI Moneypak Virus / Malware that was blocking the PC requires the payment of 100 Dollars?

  How to remove the FBI Moneypak Virus / Malware that was blocking the PC requires the payment of 100 Dollars?

  Get your updated antivirus program and boot into Safe Mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
  -
  I hope this helps.  Good luck.

• Help to remove the account from Microsoft

  Hello world

  I want to remove my account from Microsoft (https://account.live.com/closeaccount.aspx), but when I'm about to move forward, there is a great message to say out loud "make sure that * address email is removed from the privacy * is ready to close ', and it has info on how to set up automatic responses, etc...  The problem is... I don't want to delete my gmail account, I want to remove my account from Microsoft.  I signed up just to use the synchronization of OneNote, which I changed since then and I want to clean up after myself.

  Question: If I have my Microsoft account deleting, I delete my gmail account or only an association on behalf of gmail?

  I realize this is really basic, but I was unable to string together a search phrase Google/Bing which lead me to a response.

  Thanks in advance.  :-)

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the reason for the deletion of your Microsoft account?

  Thank you for details on the issue.

  Deleting an account Microsoft does not close the account that are associated with him. It only removes its association. Thus, your "Gmail" account will remain open.

  You can refer to this article:
  How can I close my account?
  http://Windows.Microsoft.com/en-us/Windows-Live/account-close-account

  See also:
  http://Windows.Microsoft.com/en-us/Windows-8/how-add-remove-account-Microsoft-account

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to remove the account from microsoft answers

  How can I delete my account Microsoft Answers? Is there a way ? I just need to ask a question (it is now the second issue), and I no longer need! Please answer if you know the answer, or if you have an idea how you can delete it. Thank you!

  Hello

  You cannot delete the account of responses because it uses the Live ID; You can not use the same ID if you do not use anywhere elsewhere.

  Hope that information was useful

• Remove the Microsoft Games folder

  Hello.  I use the version OEM of Windows 7 on my desktop HP Pavilion image.  I want to remove the Microsoft Games of the system folder because I do not play games on the computer, and the folder takes place.  But whenever I try to delete it, it tells me that I need the permission of the system.  How can I remove it?  Delete this particular issue negatively affect the computer?  Any help would be greatly appreciated.

  Hello
   
  Remove the built-in Microsoft games can not free a lot of space. But, you can disable these games of Control Panel.
  Reference: http://windows.microsoft.com/en-US/windows7/Delete-a-game
   
  Strategies to free up disk space
  http://Windows.Microsoft.com/en-us/Windows7/strategies-for-freeing-disk-space
   
  Games Explorer
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Games-Explorer

• How to remove the virus 'happili.

  I would like to know how to remove the happili virus, worm, malware, spyware or anything like that.  McAfee is not detached.  I see several websites for the kidnapping but do not know if they are reputable.  Thank you, robin

  * Original title: kidnapping happili

  Hi Robin,
  Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.
  Brian

• having difficulty to remove the traits of a media element

  I'm having difficulty to remove a dash of a subclass of the LightweightVideoElement.  Depending on the type of video game through the netstream, I want to remove the line to seek to prevent research with chrome scrub bar.

  My problem is that when I delete the line of the element of the hasTrait method is always returning true.  To demonstrate that I have add a listener in the constructor of the item as follows:

  addEventListener (MediaElementEvent.TRAIT_REMOVE, announceTraitRemoved);

  And my function is:

  private void announceTraitRemoved(e:MediaElementEvent):void
  {
  trace ("item-> announceTraitRemoved-> LINE DELETED:" + e.traitType + "hasTrait thus:" + hasTrait (e.traitType));

  }

  The output of the function after the call to removeTrait (MediaTraitType.SEEK) is:

  Item-> announceTraitRemoved-> LINE DELETED: get both hasTrait: true

  He never returns hasTrait: false to the seek feature.

  This is problematic because the Pack chrome ScrubBar determines if the air cleaner is turned on by listening to this event in a similar way and using the hasTrait method, so I can't figure out how to turn off the scrub bar.

  What I am doing wrong?  If it's important, I use 1.0 gm.

  Thank you.

  The ScrubBar must be dimmed if the SeekTrait is not present (i.e. hasTrait == false).  If you use the proxy method I described, it should work as you wish.

• How to remove the malicious software that is causing the pop up ads "to go around the web"?  These pop ups appear on almost every page I open and I have bad non-kid-friendly images?  Apple instructions for the removal of the malware did not help.

  How to remove the malicious software that is causing the pop up ads "to go around the web"?  These pop ups appear on almost every page I open and I have bad non-kid-friendly images?  Instructions from Apple to remove the malware have not removed despite them a number of times.

  Click here and follow the instructions. If you would rather not remove it manually, you can run rather MalwareBytes for Mac.

  MalwareBytes is a removal tool and does not stop adware or other malware from entering the computer. It should not be invoked to prevent future incidents; Instead, avoid downloading software from sources other than the Mac App Store or Developer Web sites.

  (140621)

• remove the Setup program for award-winning microsoft encarta 2007

  I can't remove the Setup program for Microsoft Encarta Premium 2007, this prevents me to install other programs. I already have the program on my computer. This is my second request, have received no response

  Hello

  I suggest you follow the steps suggested by John Rubdy of the binding and the audit.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_programs/how-to-uninstall-installation-message/1623740b-7e91-4BEF-8f71-dd4d5b0d8455

• I ran microsoft security scan, and it says a voris has been partially deleted. How can I remove the rest or what should I do next

  I ran a scan of microsoft security and it indicates that a virus has been partially deleted. How can I remove the rest or what step I need to take the next

  Hi Lucie,.
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Huawei has installed a malware during the installation of the drivers for the wireless modem: tips to remove the registry keys?

  Huawei sd usb storage

  Applies to: Windows | Windows Vista | Hardware and drivers

  A month before, I let a co-worker install a modem Wireless USB as Huawei to use my laptop somewhere without wifi service.  Subsequently, I uninstalled the software drivers because I don't think I'll ever use this modem again.

  Now, I noticed that there are several registry keys for different devices of e/s as:
  Huawei_sd_storage_usb
  and
  Huawei_some other drive type

  None of these registry keys can be deleted, I get an error saying that "year error occurred during an attempt to delete the key.  Same thing if I try to write data in the registry key.  This behavior resembles a persistent virus and not a register legitimate supporting a legitimate PnP device.

  I then rebooted in safe MODE, thinking which should pick up anything the malware is hung.  No go, same thing, cannot remove the key and cannot modify the data in the key.

  None of the malware scanners were able to detect this, including:
  Paid last AVG
  Windows Defender
  Microsoft Security Essential
  Spybot S & D latest
  Malware Microsoft Fixit

  I don't trust Huawei, and what look like these keys are to monitor my laptops I/O activities through any player or the USB port.

  HP DV5t-1000 CTO
  Pentium dual core 2.54
  4 GB of DDR, Home Premium Vista 64

  I'm moving your question on the forum of Windows for material and the Drivers.These are the registry keys related to the legitimate drivers provided by the manufacturer of the device and are not related to malware.

  Note, however, that you have an overload of running security software and some should be deleted. If you use Microsoft Security Essentials, you must disable Windows Defender in Vista and AVG should be removed, preferably using the AVG removal tool. I have no idea what is the Microsoft Malware Fixit.

  You should never have more than one security product installed on the PC, providing active protection / scan. This can cause performance problems, system instability and may adversely affect the effectiveness of these two products to provide protection.

  -steve

• How to remove the best malware protection virus that has infected my system Vista?

  Hello, yesterday while I was doing a search, best protection malware infected my system. I scanned my PC with microsoft security databases, but the shortcuts exist on my computer. What should I do? Has it damaged my files?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  after it is deleted:

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I have a Mac and I want to remove the feature "Firefox prevented this site automatically redirecting to another page. Show you how do to Windows, but I have not found how to for Mac

  I have a Mac and I want to remove the feature "Firefox prevented this site automatically redirecting to another page. Show you how do to Windows, but I have not found how to for Mac

  This has happened

  Each time Firefox opened

  == I try to go to page to a new page

  Thanks Cor - el.

• Re: How to remove the Microsoft Office 2007 trial version

  I have Office 2003 and that's all that I need and I want to remove the package from the 2007 trial.

  I tried to uninstall and it has been removed from the Uninstall list, however, when I look in the start menu > all programs > Microsoft Office all items office are still reported with my 2003 versions are for example

  Microsoft Office Access 2003
  Microsoft Office Access 2007

  It is a nuisance.

  Any help would be appreciated

  JimG

  Hello

  These are strange sounds, uninstall MicrosoftOffice will never cause the problem. Try to use Uninstall Manager like this:

  http://www.Softpedia.com/get/tweak/uninstallers/uninstall-Manager-Fuchs.shtml