Remove vista boot screen

Similar Questions

• Qosmio F30 starts with blue stripes during Vista boot screen

  My Qosmio F30-114 runs for years without problem with Vista Ultimate.

  In recent days, there is a huge problem.

  The Qosmio starts with blue stripes during vista boot screen.

  So I deleted the driver for the graphics card and used the standard vga driver for the card. the wizard of material found one driver on the system.
  For a brief moment, I was very lucky.

  After a reboot, there was a blue screen. After the next restard again once the driver to the standard vga card.

  What can I do?

  The download section of toshiba has no drivers for graphics card.
  And really... I wonder - how it works every year without problems...

  Someone at - it a solution?

  thanx

  toshibalover ;-)

  Hello!

  First you have this problem on an external monitor too or only on the screen internal? Maybe it s is not a graphics card problem so check it with an external monitor.

  I checked the Web from Toshiba site and I can find drivers for the Qosmio F30:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Qosmio G35-AV650: how remove Vista Boot Manager and install XP

  OK, I got the g35-av650 - US. I don't see any good American forum Toshiba, so I post here.
  First of all, I must say I'm getting very frustrated.

  1: I upgraded my BIOS to try to install windows vista. Vista installed, however, it works well. It must be driver problems. I deleted the partition that I allocated for Vista. Now, how the hell do I remove the screen/start menu in vista.
  I want to get back my XP operating system selection screen.
  I think it has to do with the boot record.

  2: my bluetooth isn't all work more (don't ask me why...) After that I updated the BIOS to version 1.40 to the newest 3.30.

  The recovery CD said I use the CD in the computer wrong? Is it possible to downgrade the BIOS/solve this problem, or bypass it.

  Thanks for the responses, because they will be very appreciated.

  Hello

  (1.) you want to reinstall XP on the HARD drive or you want to cancel only the vista Boot Manager.
  Usually after reinstalling XP, the boot manager should disappear.

  But I found these tips step by step in the internet:

  -Start your computer in Windows XP.
  -Make sure you have the image of Vista DVD emulated or in the DVD drive.
  -Go to start and run. Type in e:\boot\bootsect.exe/nt52 ALL/force (without the quotation marks and replace e: with the letter of your Vista DVD).
  -Restart the computer, and you notice that the selection of start menu disappeared.
  -Format the partition/drive where you installed Vista.
  -Remove the two (Boot.BAK and Bootsect.BAK) files on your file of root of drives XP (c), it was backup of your previous boot loader files, now is more useful.
  -Optional: Restart to make sure it still works.
  -Use your partition software to merge your partitions.

  2.), I hope that you have used the BIOS from the page we Toshiba. However, the BIOS update should not has a bad influence on the functionality of BT. Try to download the latest driver for BT and install again.

• Blue screen on vista boot even safemode

  Only change I made last week is to install roxio.  I had started after that.  Also have had the problem since the week last on my url automatically redirected to other sites.  So think, it may be a virus/spyware.

  How to debug the blue screen?  It is not even stay long enough for me to this Reed continues.  I think the code is like 0 x 0000005.   This happens after the vista boot screen gets up and I select vista boot - load all the drivers etc. then shows a black screen, and then a quick blue screen then reboots.

  I am able to get connected via the CD of vista - but not to create the administrator account for me to use the recovery.  But I can access the prompt - ran the check disk, memory check etc - all the utensils that difficult is fine (no new material not added)

  I also chose start with logging and log file ntbt*.txt doesn't seem to have problems.  Even safe mode is a failure.

  Can any help on how I debug?

  Thank you

  Hello

  The code confirms everything you have already said - 7th with the parameter 005.

  That your drivers to work has little to do with the question of whether if they work now. They could have
  become corrupted, an update might make them unstable, other causes may force in
  Unstable States (for example, some games on some hardware) and a host of other issues.

  Try the Recovery Console if you have one and a Vista disk, if not to run the system restore back to a point
  before that happens.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  From the COMMAND PROMPT

  C:\Windows\System32\rstrui.exe

  You can also try the Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  And you can try to remove the main drivers in the hope that it will allow access.

  Check this method to remove drivers and use a Vista startup disk
  http://www.vistaforums.com/Forum/Topic13820-21-1.aspx#bm152234

  Another tip on a PC is trying to replace the video card for a good market in the hope that the video driver is the
  issue. This can be done with video embedded by turning off the edge in the settings (BIOS/CMOS) if
  some require additional methods. And of course there does not guarantee that the video driver is the question.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Boots Vista black screen with white cursor and nothing else (Black Screen of Death)

  After a download from Microsoft update last week, my system has rebooted. He first had a screen blue error, rebooted, reported a disk error and automatically run CHKDSK. Since then, the system has started a black with white slider screen and nothing else. This happens at startup options (Normal, safe, safe with the last command good known configuration). Not even sticky keys would come to the top. CTRL-Alt-Delete, Ctrl-Alt-Esc and all other keys has nothing did. Even with a right click.

  I searched all over the web for solutions. I found (and tried) several over the past week, but nothing has worked.

  Here's what I tried...

  F8 held key on boot to the top and entered the startup recovery. Ran of recovery. Initially so found of disk errors. Those fixed. Then he said he could not repair the system and reported two pilot errors.

  Tried system restore. He said that I had no restore points (even if I know that I had before).

  With the help of recovery options, I went to the command prompt. Asked to RegEdit and load the Software hive. Checked the connection entry Windows NT; made sure, it has been set to explorer.exe

  The system, checked RpcSs Key hive. Already the NT AUTHORITY\NetworkService value

  Renamed event connects winevt and not create the Logs folder

  Removed the hard drive. Attached to another system (as slaves), and the registered file permissions. They have screwed everything up. The fixed file permissions and drive put back in original system.

  Œuvres self-retaining keys now. Do not, however, as my sticky keys doesn't have a link to configuration.

  Went back into recovery startup via the F8 key at startup. Now, when I run start recovery, it says that everything is going well and there is no problem.

  I have download the hotfix from article 977675 Microsoft, but I don't know how I can apply it without being able to get into windows. I would like to contact MS e-mail or chat support, but I can't get the product ID without being able to connect (frustrating talk).

  I would like to reinstall OS, but HP does not provide an installation disc with their systems (only a full restore partition). My system is backed up (with the exception of the Windows folder), but I really don't want to have to make a full recovery, as I have a lot of specialized programs and settings that would probably take me a week to re - install and re - set.

  Anyone have any new ideas?

  Hello

  Here's my usual BlackScreen convenience store, because it may be that you haven't tried
  or if you have access you might be able to come back and start some of them.

  ----------------------------------------------------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to remove the watermark from desktop vista boot

  How to remove the watermark of ' Wndows Vista Starter from the desktop? I changed the same wallpaper theme and also reviewed the "Bcdedit" cmd.exe... "but in vain.

  Unfortunately it is one of the many limitations of vista boot,

• Windows Vista boot and goes directly to the F8 screen

  Windows Vista Boot and goes directly to the F8 screen, when you select an option it the computer goes black and never start. I do not install any program again, I worked with my online banking and the computer freezes I turn it off and restart and from there to show this problem. I test the computer with seetools to test the hard drive but when I hit to accept the test the keyboard won't obey my order; later I test with Hiren and I could make a mini feture call windows xp here I could see the C drive and all files on this too, I was able to open it. What you think about that happening could be the operating system or perhaps another problem?

  Hello

  Please follow the steps mentioned in the link below.

  What to do if Windows does not start successfully http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Help remove vista and options to dual boot with Windows 7

  I think that I have selected the bits from the right here, but please let me know if not.  I recently installed windows 7 and I love it so much I want to remove vista.

  I can't find any instructions on how to make sure (after formatting the drive with Vista on it - it's on a drive of 500 GB physically separated for Win 7) that I can remove the dual boot option, I currently have.  I also read if I do badly I can leave windows 7 unusable.

  Win 7 is a full do not install an upgrade, just like vista.

  Any help on the Microsoft site means how to repair xp, vista or windows 7, so to delete this post.

  Any help or direction is appreciated, I have a few days to make what I just place my order for a 2 TB HDD, so won't try until it happens.

  Hello

  "Just to check and then (which seems easier to me), if I transfer my data from the vista disc (assuming that it is the system disk) then delete and restart with the win7 dvd, a repair will then sign the Windows 7 disk as the system disk and remove any dual boot option?

  Yes, it should work. As the Win7 disk does not currently startup files, made only with this disc a repair will create the most necessary.

  "Out of curiosity if I format the Vista disc, and then restart your computer with the win7 dvd, this will give the same effect as having Remode the floppy disk in the first place?

  No, except if you use Disk Manager to designate the Win7 drive than active first. If you simply format the Vista disk and then run a repair, startup files will be rewritten on the disk of Vista. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Vista boot t mouse cursor and black screen

  Running an Acer Aspire 6930 with Vista.  Begins to start and then get a black screen and mouse won't get log in screen.  Worked very well.

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I remove a dual boot screen at startup

  My system is Windows 7 Edition running Home premium.  I transfer an ISO file (Debian) to import cheap Stick Drive on my DVD, using Img Burn and an error has occurred on the stick reader.  This intern created a dual boot screen.  There is no evidence of the files on my hard drive.  Well the screen double boot has only a selection Win-7.  I want F8 allows to access the o/s course, when I start.  Now, how can I get rid of this double splash screen and make, automatically start directly on Win - 7 and still be able to use F8.  As it used to be at the origin?

  Thank you for your help.

  Thomas

  Watch your EasyBCD entry that says displaybootmenu and he says Yes:

  

  You may need to wait for the selection of the user defined in EasyBCD.

  In EasyBCD, choose edit Boot Menu set it to look like this and save:

  

  Display settings then again:

  

  Note that if you don't have an OS installed and used EasyBCD to wait for selection the user makes the msconfig Startup tab look like this:

  

  But you can not enter this field-1 and you cannot change it to zero (should be between 3 and 999) but if you turn off your displaybootmenu in EasyBCD, it sets the time msconfig to zero.

  Oh Yes...  F8 for advanced startup options-access still works fine.

• Help with Windows Vista black screen

  I have a Windows Vista SP1 64 bit with 8 GB of RAM and 2 3850's Radeon ATi CrossFireX. in any case, I have a program called mechanical system, you've all probably heard before, this is an excellent program to clean your hard disk and defragment your memory. However, I ran last night and said the program automatically restarts the computer when it ended, after that he finished and I rebooted was greeted with the atrocious Black Screen of Death with a cursor, if it is not blinking and I can move it freely, but there is nothing I can do with it given the background task bar is non-existent and the entire screen is black.

  I tried some of the solutions, I can not even the CTRL + ALT + DELETE to get into task manager and manually start explorer.exe; Help me please. The only type of response I can get from the system is to obtain the keys to stick to pop up when I hit the SHIFT key five times. I am very confused. I don't have external hard drives hooked up to it and there is no thumb-drive connected via USB either. I'm completely puzzled here. Please help me.

  Hello

  System Mechanic, by Iolo is one of the best of this type of program, he's trying to at least
  be legitimate, however it is still a Registry Cleaner and system optimizer that leaves a
  much to be desired in terms of compatibility. These programs are more likely to ask questions
  While fixing anything. Most are like snake oil. So my advice would be to uninstall. If you insist
  use make sure you have done a current Restore Point before using it and keep current backups
  on the primary drive.

  -----------------------------------------------------------------------------------------------------------------------------------------

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  ===================================================================

  Sometimes it works:

  There are backups in the folder C:\Windows\System32\Config\Regback.

  Here is an article for XP and Vista is similar in scope. The config folder and its content should
  be rebuilt.

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Check this thread - you can use the command to a startup or recovery disk prompt.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• Recovery of Windows Vista BOOT MGR is missing

  HP Windows Vista loading SP and began a loop at 3 on 3. Now it says boot mgr is missing. I don't have a disk recovery or start. I use my newer computer with windows 8.1. How to make a floppy disk recovery or the HP windows Vista Starter? any suggestion would be appreciated.

  Discussions were merged.

  Duplicate is not removed as more information provided by OP.

  Hello

  You cannot repair Vista with Windows 8/8.1 except it can be used to download and create
  Disks of Vista.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  This is the troubleshooting methods to try to resolve the problem:

  BOOTMGR is missing Press Ctrl + Alt + Delete to reboot the error message when you start Windows
  http://support.Microsoft.com/kb/2622803

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  This tells you how to access the System Recovery Options and/or use a Vista disc
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try the startup of the Options or Vista recovery disc repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Repair the Windows Vista boot loader
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information.
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Start Windows Vista blue screen STOP: 0X0000007B

  original title: Windows Vista BSOD STOP: 0X0000007B (0X80599BB0, 0XC000034, 0x00000000, not Vista constantly giving me the BSOD start up.)

  Hi all

  Windows Vista (32-bit Home Premium) recently gave me the BSOD STOP error: 0X0000007B (0X80599BB0, 0XC000034, 0x00000000, 0 x 0000000) after a sudden power loss. I can not load even with on Vista Blue Screen of Death. Safe mode does not work, with him crashing when obtaining at crcdisk.sys. Startup Repair cannot find a mistakes. System Restore does nothing useful. CHKDSK does not seem to find any errors. The last thing I want to do is to reinstall my operating system. Before my computer became like this, I had no virus on my computer and was not installed and drivers. However, I switch autour with boot options to allow two processors start the computer, but I no he did not do a reboot. I suspect that something in the boot parameters is in trouble. My computer was working fine the day before, and this incident is terribly annoying. I would be very happy if someone could give me a helping hand.

  Hello

  / Settings (BIOS/CMOS) often F2 when you start then look at screen. Once in the BIOS screen
  Search for 'Load Defaults' or 'Default' or similar.

  This is for a DELL and most are similar
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=4C1BF720A3E78F92E040A68F5A2811BE

  How can I reset CMOS / BIOS settings?
  http://www.computerhope.com/issues/ch000976.htm

  Or method of material:

  How to reset the BIOS
  http://www.WikiHow.com/reset-your-BIOS

  More information:

  BIOS for beginners
  http://www.TomsHardware.com/reviews/BIOS-beginners, 1126.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.