Removing the Intel inside sticker void my warranty?

Similar Questions

• Satellite A500 - upgrade the processor and RAM void my warranty?

  I have a Toshiba Satellite A500, and I think to upgrade my processor CPU and RAM. If I open it invalidate or do I need a Toshiba authority to open it? Removes the card RAM will void the warranty?

  All I need to know is that can I put RAM and CPU processor without voiding the warranty

  Hey,.

  If you upgrade the CPU, you will cancel the warranty because this upgrade is not supported from Toshiba.
  In addition, I put t understand why you buy a laptop, and then you think of some hardware upgrades. In your case, I'd rather bought a laptop with faster processor and more RAM.

  See also this article from Toshiba:
  [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://APS2.Toshiba-tro.de/KB0/TSB9401AX0001R01.htm]

  Finally and above all a RAM upgrade is not a problem. So check your user manual how to do this.

• I removed the Intel 32-bit architecture, do I have to re - install OSX EL Cap to get it back?

  I removed the Intel 32-bit using a freeware program called monolingual architecture that eliminates essentially irrational language files and architectures to recover from storage space. I didn't know that MS Office for Mac 2011 requires it.  I have to re - install OSX EL Cap to get it back?

  Yes. You may also need to reinstall Microsoft Word and any other program assigned by monolingual.

  Programs such as monolingual should not be used.

• Can I remove the Intel-based programs on windows 7?

  I have two listed Intel programs. Do I really need them? I don't use graphics, etc.

  Hello

  Each computer uses graphics to work.

  Without graphics, you have anything on your monitor, except a white, black screen.

  I suggest you leave the programs Intel

  See you soon.

• HOW TO REMOVE THE DRIVER?

  Hello, need help to remove the Intel Graphics Media Accelerator, I want to install a XFX 9800 GT video card and need someone to help me remove this driver before I install the neww card, I am not a computer wizz, cann someone help me through tis step by step so that I can do the installation?  THANKS FOR THE HELP!

  Press the windows key, type in Device Manager, click the display adapter tab and click the arrow. Click with the right button on the Intel Graphics Media Accelerator and click on uninstall. If there is no option to uninstall, and then click Properties, click the driver tab and click on uninstall. Fact.

• IM using hp-envy 15 3021tx. IM wondering if I remove the battery, I void my warranty?

  ??

  Hello

  You would not void the warranty by removing the battery - if you use mainly the laptop with the power adapter is connected, I suggest you drain the battery to about 40% before you remove and store in a cool if that's what you want.

  Kind regards

  DP - K

• Satellite L650-1CN: can I remove HDD without voiding my warranty?

  Hello

  I had a power outage in my laptop that requires him to be returned for repair (see [here | http://i.imgur.com/abq1U.jpg] and [here | http://i.imgur.com/Jk9X8.jpg] for photos of damage, some of the plastic on the melted screen, probably a short circuit?).

  Before that, I want to take out the hard drive.
  There are two compartments on the bottom of the laptop, secured by a screw.
  I guess that one of them contains the hard drive.

  Can I remove the HDD without voiding my warranty?
  In case the guarantee differs between the countries - I am from the Netherlands, the laptop was purchased in 12/27/2010.

  Thanks in advance

  Yes, you can remove the HARD drive and would not void the warranty.

  Here you will find some details how to replace the HARD drive:

  [Satellite L650: how to replace the HDD | http://aps2.toshiba-tro.de/kb0/CRU0A031O0000R01.htm]

  Welcome them

• The RAM upgrade will void the warranty?

  Hi guys,.

  Just a question, I just bought a HP laptop. I want to add another 4 GB DDR3 stick. Would that void the warranty?

  Thank you!

  Hello

  No, it will not void your warranty.

  Kind regards

  DP - K

• How to remove the sticker EasyGuard my Portege?

  My laptop Portege came with a really stupid sticker on this advertising functionality EasyGuard. I tried to remove it and have found that it is a real mess.
  Can you tell me how to get rid of the sticky mess so that I have a nice laptop without a stupid sticker on this subject.

  Hello

  You must be careful with the use of any toxic liquid because it can destroy the surface of the laptop.
  As far as I know you can get particularly fluid at a computer retailer to remove the stickers and labels form the surface.
  You can also visit this page:
  http://www.WSMV.com/global/story.asp?s=1632102

• Remove the stick of memory icon

  remove it safely icon disappeared from my taskbar. How can I get that back? Is it safe to remove the memory stick?

  Hello

  Check that the icon is not just hidden by clicking on the small arrow to the left of the clock on background
  right. Also check right tab click on taskbar - properties - Notification area - icons - customize -.
  to be sure, it is not set to HIDE.

  If necessary:

  XP - go to start, run, type the following line, and then click OK. The following command is case-sensitive.

  Vista - Start - type in the search-> CMD bar find top - make a right click on - RUN AS ADMIN

  (You can copy and paste the line)

  Rundll32.exe shell32.dll, Control_RunDLL hotplug.dll

  Remove the icon of USB device missing from the taskbar
  http://www.techf5.com/archives/safely-remove-USB-Hardware-icon-missing-from-taskbar/

  Restore missing or disappeared safely remove hardware icon
  http://www.Raymond.CC/blog/archives/2007/12/30/restore-missing-or-disappeared-safely-remove-hardware-icon/

  Remove device icon lost
  http://en.kioskea.NET/FAQ/Sujet-2501-safely-remove-hardware-icon-lost

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RE: monitor x 2211. Removed the film transparent edge, but not the long sticker on the top of the page to?

  RE: monitor x 2211.  I removed the transparent film on the edge of the black screen, but the characteristics of long sticker advertising in the upper part are loose? I won't try and realizes that he is well and truly stuck on.

  It should come off, and if you are afraid, you can use goof off if it leaves pieces behind, or just rub your thumb or finger on it until it becomes hot and then pieces detaches.

• remove the sticker that is on the touch screen?

  remove the sticker that is on the touch screen?

  You can remove the plastic screen cover when you want it, although some people like to leave it on to avoid smudges, dirt, etc.

  Please, click on the Blue Star of congratulations in the post helped you.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• Not able to remove the USB stick while Labview is open

  For all the gurus.

  I'm using LabView 8.5 and made an Application that requires the user to download the data of the disc/USB. Then, when VI works user invited to select a. TXT from USB to download file. Here, the entire operation ends as desired. Only ONE PROBLEM I am facing is when download completed attempts to the user to 'remove the USB' where gives windows a warning saying USB is in use and cannot be deleted.

  This particular VI I use function of file dialog box to browse USB and let the user select a file. I even tried to use the function to open the file, but it gives same error.

  The only way I can pull out USB after the download is out of Labview which is not feasible for my application.

  is this a Bug in 8.5 or is there a different way to do it?

  Any help will be appreciated.

  Concerning

  You can call the Windows API SetCurrentDirectory function (see attachment), but if you follow the link you will see it warns about its use in multithreaded applications. I have no experience with it, so I can't comment.