Rename the folder to the user files

Similar Questions

• Rename the user folder

  I bought a netbook with Windows 7 from a friend and was able to change the name of the account in my name.  However, some of the user files still use the old name of the user.  How can I change the name of the user folders to account for my own name?

  Rename the user folders can cause problems.  The best solution is to change the name of the user account back to what it was, create a new account with your name and copy the files of data desired from the old account to the new account. Boulder computer Maven
  Most Microsoft Valuable Professional

• Easy question: router WRT54G: how to rename the user and give a new password?

  Not very computer, but following the recommendations in the FAQ, I have reset my WRT54G router to the default settings by hitting the reset buttong and entering into the Web site. I got a new computer and I forgot the old password. After reset to defaults now the link is not secure. How can I go about renaming the user and giving it a new password of my own - it was a while that I have configured the router, and I don't have the CD. Any help that you can offer or the direction you can piont me is appreciated.

  Try to proceed as following:

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...
  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• How to rename the configuration files store data with downtime

  HI team

  I've renamed the vcenter client name. How to rename the configuration also files in data store with to take the time to stop.

  you have renamed virtual machines, and now you want to also rename the config files (vmdk, vmx and so on)?

  Just do a storage vmotion and the files will be automatically renamed...

• of MSHS - cannot rename the data files

  I have a MSHS (encryoted MSH) - 5 last lines in this script - I have a command shell that renames the data files. for example
  
  Shell ren f:\data\abc_morning.txt abc_20100912_morning.txt
  Shell ren d:\data\def_afternoon.txt abc_20100912_afternoon.txt
  Shell ren t:\data\abc_evening.txt abc_20100912_evening.txt
  
  These commands work fine in the MSH script, but get the "File not found" error in file MSHS. Has anyone else ran into this problem?
  
  MSHS command also asked how to rename the data files as Shell REN does not work?

  It's really simple:

  MSH scriptname.msh

  That's all.

  Kind regards

  Cameron Lackpour

  Edited by: CL, Sep 13, 2010 16:37
  Adding an extension to the scriptname.

• Rename the csv file

  Hello

  After an exhausting search this forum and a lot of trial and error, I was not able to work on how to rename a .csv file.  For example, I want to change the name of the csv files in a folder to include the name of the folder. For example, from Trial01 to Folder1_Trial01.

  Can someone help me, please!

  Thank you

  CJ

  CJ,

  You can try something like this:

  

  Norbert

  PS: If it is difficult for you to understand, you might want to do a training online or visit a LV course of NOR.

• Portable joined to the domain and now the user files are missing.

  Our server (SBS 2003) crashed and I had to rebuild it and then I had to join a laptop in our area and now all the files for this person is missing.  We use the option synchronize folders when this person was missing and now I wonder where all these files are gone?

  We had no backups (I know, I know) so now we have a couple of people who have lost all their data.  Is there a way to make it back the computer joined to the domain?  Some kind of folder offline connection or cache somewhere?  I checked the documents and Settings folder, but the user profiles 'My Documents' is empty.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Microsoft Outlook and would be better suited in the ClientTechCenter of Windows. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Rename the import file when

  Here's the script that import a mp4 from my "d" drive file

  {
  var imgDir = ("d:");
  var newAmt = 1;
  if (!app.project) { app.newProject(); }
  var myItemCollection = app.project.items;
  var myComp = app.project.activeItem;
  var myProperty;
  function processFolder(theFolder)
  {
  
  for (var j=4; j < 5; j++)
  {
  var importOpts = new ImportOptions( new File(theFolder + "aff"+".mp"+j) );
  var importImg = app.project.importFile (importOpts);
  var myImg = myComp.layers.add(importImg, );
  }
  }
  processFolder(imgDir);
  }
  
  

  It import a file "aff.mp4" in my repertoire. But I want to rename the file 'aff.mp4' when it imported. is this possible? Please help me...

  Try this:

  {

  var imgDir = ("d:");

  var newAmt = 1;

  If (! app.project) {app.newProject () ;}

  var myItemCollection = app.project.items;

  var app.project.activeItem = myComp;

  var myProperty;

  function processFolder (theFolder)

  {

  for (var j = 4; j)< 5;="">

  {

  var importOpts = new ImportOptions (new folder (Folder "conf", ".mp" + j));

  var importImg = app.project.importFile (importOpts);

  importImg.name = 'fame Layer. "          Rename the layer after import

  var myImg = myComp.layers.add (importImg),

  }

  }

  processFolder (imgDir);

  }

• vCenter Server - rename the config files and moving datastore

  Our vCenter VMware Server (4.1.0) is a virtual machine. The vCenter Server database is stored on a SQL Server that is also a virtual machine. The configuration files for the server vCenter and file a vmdk are located on a data store and the other vmdk file is located on another data store. This isn't a problem, but the parent folders that store these files have different names and do not reflect the name of the vCenter Server VM. Also the names of configuration files are different for the vmdk file names. I would like to move and rename files vmdk my vCenter Server to another data store and all the configuration files so that the parent folder that stores all the files has the same name as my vCenter Server VM and all of the files in the folder are on behalf of my vCenter Server VM.

  What would be the best way to do this? Can I install the stand-alone converter on the vcenter Server and migrate the server? I have a vCenter Server Standard license. Thank you.

  as above, use storage vmotion if possible else, you can use vmware converter...

• Cannot rename the RPD files

  Hello
  
  I want to replace the file RPD development with RPD production record. Here's what I did:
  
  1 make a copy of the current production RPD by clicking on "copy as" in the Administration of BI (repository).
  2 moved the copy to the folder of repository development.
  3 rename/remove current file from RPD. This is where I came across the problem. I always get 'cann't delete/rename, the program is used by somesone or program...'.
  
  I have to be BI admin to rename/delete the RPD? Nobody used the repository at the time.
  
  Thank you.
  
  May

  Stop BI servers, servers of presentation, OC4J or application servers and then do it. It will work!

  If helped reward points

• No Internet access after you have copied the user files on.

  I created a new user account and copied all the files including documents and settings from an old user account.  Before I did I unhid all hidden files and system files.  What I was expecting, it was the new user account should behave exactly like the old user account without problem outside the difference between user account names.

  However, after doing this I couldn't Internet new user even account I could ping all web Internet sites I've tried.  Finally, I have to create another user account and copy only the document and manually I have to redo all the personal settings.

  If the problems were gone.  However, I would like to know if it is a problem to copy personal settings.  What is the most efficient and effective way to transfer the account from one to the other?

  Hello

  Did you remove the following files on the new account?

  • Ntuser.dat
  • Ntuser.dat.log
  • Ntuser.ini

  http://support.Microsoft.com/kb/811151/en-GB

  The link above shows how to copy a profile, however as far as the most effective way of copying, it depends on what you want, that is to say some parameters can be set for all users of the computer local strategies etc. If you want documents available to all users, use an all the "users share" with the permissions to prevent some accounts, editing files. This may or may not be what you want to achieve.

  Please confirm what data/files/personal etc settings you want to duplicate to the new user accounts, and state what - this time when creating or on an ongoing basis.

  Finally you use XP Home or Professional?

• How to do past the connection if the computer indicates the user file is corrupt?

  I have windows vista home basic race and a user account with the computer configured password allows the password to enter but once past this computer file of the corrupted user States and dates back to the user login page

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• How to rename the JAD file to eclipse MIDlet name

  Hi, expert,

  at the present time, our product team asks me to change the product name of the name of one to the other, I changed the title in the properties of the eclipse project and thought that's it. Cod file name was still the same as before.

  Then I discovered that I was wrong. The name options-> list of applications is still the old name. Then I change the COD file name (the name of the JAD file is also modified with it) and thought that I would be ok this time.

  I was denied again. The name on the download of air link always displays the old name and found out that the JAD stll MIDlet-name file has the old name and browser would use this name. Options-> application list, it still shows the old name. So I have to change the name of the MIDlet-name for the new name. However, I couldn't find a way. on the descriptor xml project, there is a tag called MainMIDletName, I changed to the new name:

  However it does not seem to help as well. After research, I found this link, but it does not say exactly how do without changing the name of the project that I really don't want to do:
  http://supportforums.BlackBerry.com/T5/Java-development/how-to-rename-JAD-in-JDE-Eclipse-without-ren...

  I have a few choice here? Any help would be appreicated.

  Hello

  To have the "MIDlet-Name" of the renowned JAD property, you will need to rename the project. Output file names can be changed via the BlackBerry_App_Descriptor.xml > Build (tab) > name of the output file (field).

  Kind regards

• Is there a way I can rename a shortcut of jumplist IE in a local file without renaming the acutal file?

  "I would like to create a shortcut Internet Explorer jumplist to the next file -"C:\temp\Sharepoint Doc\index.html"but I want the shortcut Jumplist should appear" documents "Sharepoint". ""  I've tried everything I can think of, but it still appears in the jumplist IE under the name "index.html".

  Things that I have tried-
  1. simply dragging "C:\temp\Sharepoint Doc\index.html" to the IE icon in the taskbar to pin them in Internet Explorer.  Of course everything presents itself as "index.html".
  2. create a shortcut of "C:\temp\Sharepoint Doc\index.html" on the desktop.  "Rename the shortcut to" documents "Sharepoint"and then drag it to the icon of IE in order to pin.  Yet once, stands as "index.html" even if it is the shortcut I did drag the icon.
  No matter what I try, I can't rename the shortcut jumplist without change of name "index.html" itself to what I want.  This seems odd, since the jumplist element should be shortened.  It seems to work very well if it is a shortcut to a url on the internet.  Can I change the name of the shortcut all I want but shortcuts to local files do not seem to work the same.

  Hello

  The method you're trying to do is not normally possible as the jumplist shortened specifically to this file name. However, you can check the links to see if this might help you.

  Jump lists

  http://Windows.Microsoft.com/en-us/Windows7/products/features/jump-lists

  Using lists of shortcuts to open programs and items

  http://Windows.Microsoft.com/en-us/Windows7/using-jump-lists-to-open-programs-and-items

• Erase the name on the user files after

  I have a laptop with windows 7 installed second hand. After getting it, I immediately deleted this users account in Control Panel our association and created my own but now their name appears before the name of the file and the label of the user such as Maggie/Robert. I have tried everything I can think off except completely wipping summer car.

  They easiest way to solve this problem is to create a new account of a user with administrator privileges.

  You cannot delete the name.

  When you have set up the way you want to and copied the data files you want, you can delete the old user.

  See this.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile