Rename the name of the connection Wireless in Windows 8

Similar Questions

• I lose the connection Wireless for Windows XP Home Edition

  Hi, my first question here!  I have a laptop Toshiba Satellite with Windows XP Home Edition.  I have a Linksys wireless router.  Regularly, when the laptop hibernates or sleeps and turns the WiFi connection is lost.  Trying to 'fix' or 'connect' is usually unsuccessful.  Most of the time, after the reboot, it reconnects. Any suggestions?
  Thank you very much!
  Ken

  Assumed as replied, without other added messages

• How to restore the connection wireless internet?

  Impossible to establish a WiFi Internet connection.

  
  

  Laptop can only connect via LAN. Connection Wi - Fi deleted while surfing online. don't know how to restore the connection.

  
  

  
  

  Hi WeiShangSing,

  To set up a wireless connection on Windows 7 computer, I suggest you to refer to section of the online help and check if it helps.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-CA/Windows/setting-wireless-network#1TC=Windows-7

  If you use a wireless router, you can also see this link for help:

  http://Windows.Microsoft.com/en-CA/Windows/set-up-wireless-router#set-up-wireless-router=Windows-7

  If you are having problems with the connection Wireless to the computer please answer back with error message. If you need help, I'll be happy to help you.

• If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  Hello

  -You use Boot Camp as the Boot Manager? If so, make sure that all boot camp for Windows 7 drivers are installed.

  -You receive an error message?

  If you use Boot Camp, I suggest yo 1All operations from the below mentioned link and check if the problem persists.

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  For reference:

  Support for Boot Camp

  http://www.Apple.com/support/Bootcamp/

  Hope this information helps.

• Problems connecting wirelessly with Windows XP

  Original title: microsoft.com/wzc service/article 871122
  We had to reprogram our computer wireless caused by a virus.  Now, we can't get a wireless connection from our desktop to our wireless computer.  We have a low signal 4 but it says it is trying to acquire the network address.  What is the procedure to try?  Thank you.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  You can check the link below to troubleshoot issues with the network wireless in Windows XP.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Method 2:

  Also, you try to run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Pavilion DV5-1015nr: How can I activate the connection Wireless on laptop DV5-1015nr?

  After upgrading my laptop DV-5-1015nr (x 64) from Vista to Win 7 wireless switch (just above the 'Insert' key) stays red, no matter how many times I press on this subject. In Device Manager, I see the Networl cards drivers I installed Win 7' work properly': Broadcom 4321AG 802.11a/b/g/draft-n Wi - Fi (sp45524) adapter and Realtek PCIe GBE Family Controller (Realtec v7.003.0213.2009).  HP does not offer a x 64 driver for the latter, so I got it from Realtek.

  Here are the steps I've tried so far:

  1 makes sure that Windows Explorer has been implemented.

  2 start-> Control Panel-> Network Sharing Center-> manage network wireless-> add-> manually create a profile network-> used the settings on my smart phone which is able to connect to the Internet:

  ~ Network name: 52GT6

  ~ Type of security: WPA2-Personal

  ~ Encryptiontype: AES

  ~ Security key: XXXXXXXXXXXXXXXX

  ~ Start this connection automatically: Yes

  ~ Connect even if the network is not broadcasting: No.

  3. click on 52GT6-connection > tab-> select as follows.

  ~ Automatically connect...: Yes

  ~ Connect to a more preferred...: No.

  ~ Connect even if the network is not broadcasting...: No.

  ~ Activate the WLAN connection setting: Yes

  4 OK.

  I click on 'Connect to a network' and receive a notification that "no connection is available. Running a diagnostic feature of "Troubleshooting" reports that the 'wireless capability is turned off." By pressing the switch wireless does not turn on the wireless feature.

  I went to this problem all day. Anyone able to help me?

  Hello:

  See if it works...

  First, install this driver update wlan...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_95652_2

  I would change the same connection if not broadcasting setting to yes.

• Reconfigure the connection Wireless on Satellite M160

  My wireless seems to have gone wrong somehow. The computer will not pick up or connect to my network. Is there a way I can reconfigure the connection?

  Hello

  Of course, you can reconfigure the WLan settings.
  First of all, I would recommend resetting the router Wlan. Check the settings of WiFi, filtering by mac address, SSID name encryption.

  How have you tried to connect to the Wlan? Did you use the 3rd party Wlan client configuration tool (Intel, Atheros) or did you use the Wlan configuration option to own Windows?

  If you use a 3rd party client WLan configuration tool, then the windows own option should be disabled.
  I recommend to go through all the settings (encryption key, ssid) and please check if everything is good.

  By the way; Please don t forget to activate the wireless on your laptop network card ;)
  The switch on the side of the laptop must be turned on, and you should switch to WLan using FN + F8 key combination.

  Good bye

• Re: Disabled the connection Wireless on Win 7 - Portege R600

  I installed Windows 7 (new installation) on Toshiba Portege R600 laptop and the built in 3 G modem does not work.
  When I run Toshiba Wireless Manager, he wrote "the Radio is off. To activate, activate Mobile switch. ».

  I'm sure that this switch is on, but pass connections wireless using Fn + F8 does not work then maybe it is off but I can't allow it. I have installed all updates of drivers such as: Wireless, Wlan driver manager.
  BT Stack, etc.

  Does anyone have an idea?

  Hello

  Wait a minute;
  You want to activate; Modem WiFi or 3G?
  Please note that WiFi is not 3G modem.

  Don't forget that you have chosen and activated the modem 3G and not the WLan.

  Welcome them

• I lose the connection Wireless Photosmart 7525

  After I print some documents on my Photosmart 7525 new and allow him to "go to sleep" I can no longer connect without power cycling of the printer.

  Windows 8

  No error messages other than "unable to communicate with the printer.

  I put the static IP address on the printer

  Cycle power and the printer prints everything that is in the queue

  Cannot ping printer until the power cycle

  I have 3 computers that connect to the printer, and they all have the same question.  the other 2 are machines to windows 7.

  Any help would be greatly appreciated.

  Reset the printer to its defaults following the manual.  Reset a static IP address in the printer out of the range of the DHCP of the router (check in the router).  Set to a channel like 1.6 or 11 fixed wireless, never 'auto '.  Cycle so much power and reconnect.  Try now.

• Unable to save the connection Wireless to a flash drive

  I'm saving my connections without wire of a machine so that I can import them on another. I use the wizrad to Windows 7 and I'm to the point where I hit next to export or copy the settings on an external drive. Once I have click on next to start the copy I get an error that says:

  Impossible to copy the settings to the USB flash Drive

  Windows cannot save your network settings on the flash drive.

  The flash drive is visible in Windows Explorer and I can copy files it it.

  -Russ

  Hi Russ,

  Thanks for posting your question in the community of Microsoft Windows.

  From the description of the problem, it seems that you can not save the settings of the wireless connection to a flash drive.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  I suggest save wireless settings using Netsh commands to export a profile wireless existing to a XML file, then import the wireless profile settings stored in the XML file on another computer.

  Follow the steps in the link below to import and export wireless profiles.

  Import and export wireless profiles:

  http://TechNet.Microsoft.com/en-us/library/dd283011 (v = ws.10) .aspx

  Note: This also applies to the Windows 7 operating system.

  If the problem persists, I suggest you to ask your question in the Technet forums to get help from the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• HP Deskjet 3522 connected wireless but windows 7/8 can't find the printer

  First day, I installed and updated the printer and the software and it worked perfectly, I could print wireless and email with eprint and print it out.

  The day after the computer could not detect the printer,

  Here is what I tried:

  • I tried to uninstall the printer and install again
  • factory reset
  • connect with WPS
  • installed with usb, and then try again to convert wireless
  • I set up the connection manually and also for the software settings to automatically
  • I tried the scan doctor
  • I tried with another computer
  • reset the router.

  and nothing has worked. The printer indicates that it is connected, the only thing I can do, is that it works with the usb and send emails to the printer, then it might print "wireless".

  Hi alex-86. A hard reset is accomplished simply by unplugging the printer while it is on and then with 30 - ish and plug again. I'm not sure that this will solve the problem that you are familiar with. If she works initially then stopped, you can consider power cycling your router as well.

  It is a fairly comprehensive list of measures you should get back up and running. Let me know how it goes.

  http://support.HP.com/us-en/document/c03388454

• How to enable the Manager wireless in windows xp

  Hoe activate Manager wireless in windows xp?

  Hoe activate Manager wireless in windows xp?

  See http://www.ezlan.net/wzc.html

  Remember - you should have only a utility for managing your wireless connection, so if you want Windows WZC to do, don't forget to disable any utility that was supplied by the manufacturer of the computer or a wireless adapter.  Frequently, the Lim utilities have an option in the user interface of 'letting Windows manage' the connection.  By selecting this option should be enough to turn off the utility of the Lim and turn on Windows WZC.

  For additional assistance, indicate:

  1. What version of Windows, including the service pack is installed.
  2. Brand and model of computer.
  3. Male and model of wireless network card.

• Keep losing the connection Wi - Fi Windows 7

  I keep losing my connection Wireless on my Dell Studio XPS 1647 running windows 7 Home premium.  I have a router netgear dual band Dell laptop, xbox 360 in my house and my other computer and panasonic tv all run on the network without any problems.  My wireless card is an intel centrino advanced-n 6200 and my card was replaced, reinstalled by Dell and updated, because they thought it was the problem.  I also turned off the power to the wireless card management to make sure that wasn't the problem.  My internet runs fine for about 10 minutes or less then slow down or completely the loss of connections.  I am at a total loss about what to do next, and would appreciate any help!

  Your TV service and the phone can function properly and at the same time, your Internet connection may be down.  I always check the box attached over the outside to see if the Internet light is on when this happens.  Usually he is gone because of something done Comcast.  You didn't say which is your Internet access provider, but you can check with them.

  When I call Comcast they me jump through a bunch of hoops to a canned script, that they have, which most is useless, but they said that is what to tell people.  :-(  In my case, I found that unplugging the power cord from the Comcast box for a minute or two, then reconnecting usually solves the problem without having to turn off and restart.  Usually if I simply ignore it for a period of time (usually less than one hour) it will recover on its own.  YMMV

  I hope this helps.  Good luck.

• How can I get all the connections on a windows 2008 r2 through a VPN server?

  How can I route all internet connections on a Windows 2008 Standard r2 through a VPN server?

  When I try to run just on an account administrator through regular networking, it hits the vpn in offline mode when someone else that the administrator is trying to distance in.

  I have to use a vpn, because I'm on a school network and have permission to use the server, but I have to do my own static IP address.  My solution for the static IP address, he ran through a VPN with data unlimited which ended with a dedicated static IP address.

  Everything on the server works when comes the administrator will connect.  Site Internet/game/file Services/Ect.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Need to change the connection information for Windows 8 - can not connect to computer because associate login hotmail account has been deleted

  Long story short - the email address associated with my Windows 8, log in to my desktop computer has been deleted and now I can't connect to my computer at all.  Is it possible to access my computer without having to take my computer to a technician to reinstall Windows 8?  Any help is appreciated, thanks!

  Hello

  I understand that you have removed the Hotmail account and Windows does not let you connect as a result of this deletion. Unfortunately, there is no other way to enter to account without using the password (if the account is active).

  You can see the Microsoft Account self-help recovery article and check.

  Recover your account

  If no help, I would recommend that you post your query in Windows Live ID support for assistance.