renamed authui.dll and get black screen

Similar Questions

• Repair installation fails on Windows 7 and get black screen

  I put in a repair disc and then I put in a disk to reboot and did he pulled upwards so that I had to do a reboot but got black screen saying something was not so tempted excessible to esc but used left me tried to restart again and it will not restart please help running windows7 64 bit

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

  Black screen in Windows Media Center during the TV

  When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

  TV works on the other program I have and has been workign on MC last week, but now I don't?

  Some success with this issue (its OK, but BLACK) video for live/recorded TV

  ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
  (2) restart Win7 64-bit
  (3) Win7 located & reinstalled the drivers
  (4) VOILA!   Real video and audio live & recorded TV

  BTW - before above fix in Device Manager:
  Notice anything in his video & Game Controllers
  'Properties' reported 'this device is functioning.
  "Update drivers" reported "... software driver...»
  ... and no updates of WMC anywhere in sight

  Go figure!

• HP t510 and t5565z black screen

  Hello

  I have several HP t510 and t5565z thin using HP Smart Client OS we use for VMware View customers. Thin clients for very well most of the time. However occasionally they will get black screens and no longer respond. I would say that this probably occurs during long periods of inactivity may be several hours or more. Has anyone already experienced this? It can occur during a session connected or simply sitting lit all night.

  These thin clients also seem to have a kind of construction in both screen saver. Because they will go in this black screen after 15 minutes of inactivity. They return generally, but I can't find anywhere in the settings options or BIOS to kill this screensaver.

  To anyone reading this, I found a solution. I found myself by opening a ticket with HP about the sleep function screen integrated with Smart Zero Client generation. I was information this feature was not available without the component of profile manager of the HP Server deployment, you can use this thin client.

  I finished the switch back on the ThinPro build because you can control the screen saver and display the power options in the generation of HP. I had a feature request to HP to allow the screen saver and power display options to be greeted with the Smart customer zero built in the future because they added an Admin mode in the last generation, they pulled out for us who do not have enough of them to justify the use of the server component.

• Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.

• New Y500 brand guard freezing and goes black screen

  I recently bought the y500 Monday and it was perfect until today where she got a blue screen of death with the ERROR of VIOLATION of CUSTODY of DPC dog or something like that and since then it has been freezing randomly and goes black screens where I turn it off? Any help?

  I fixed it I think it's all good, until here, if anyone has the same problem, I have just restored my pc to a date where he worked well and optimized my drivers. I may not be not similarly had to restore my pc

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Why my computer off and get blue screens

  Why my computer off and get blue screens once from time to time. My hard drive sounds like he works hard. I can hear it ticking sweet sounds when I start the computer, and it takes a while to calm down.

  Ron

  Hi Ron,

  I suggest you to follow the steps mentioned below and give us the blue screen error message.

  1. click on Start and then click on Panel.

  2. click system and Maintenance , and then click System.

  3. click on Advanced system settings.

  If you are prompted for an administrator password or a confirmation, type the password or click on allow.

  4. click on the tab Advanced and then click settings under Startup and recovery.

  5. to the failure of the system, click on to erase automatically restart checkbox.

  6. click OK and then click ok.

  7. try to reproduce the error.

  Reference:

  How to fix error Bluescreen (STOP) that causes Windows Vista to shut down or restart unexpectedly.

  http://support.Microsoft.com/kb/958233

• Get the error code 0x80070426 and a black screen when recording in Windows Vista

  Original title: Error Code 0x80070426? __

  I have tried to connect with windows vista but had a black screen with the box in the middle that says error code 0x80070426

  Hi henry90909,

  See the instructions below thanks Darin Smith MS:

  If you do not have access to the Start button:

  1) click computer access with reduced functionality

  (2) a browser will open, type:%windir%\system32 in the address field

  (3) find the cmd.exe file

  (4) make a right click on the cmd.exe and select run as administrator

  (5) type: net start slsvc

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite L300-1AP and Win8 - black screen on startup

  Hello

  My computer starts as usual, the first screens come well and it will also in the journal of the user on the fine screen.

  However when he was usually in the Windows 8 home screen it goes just a black screen.

  The mouse icon is still there and the work, but the only thing that I can get up is the Task Manager.

  No idea what it is? Eventually a failure of a Windows 8 pilot as everything else seems to work?

  Thank you!

  I agree with Timox; It would be interesting to know if the laptop is working correctly by using another system; in the best case with the system pre-installed and pre-configured by Toshiba or Windows 7.

  I m interested also in the installation procedure you install Win8? Did move you from Win 7 to 8 Win or did you do a fresh install?

• Upgrade and repair black screen CQ61

  Hello

  I have a laptop Presario CQ61-214TU.  Upgrading to Windows 7 from Vista.

  Push the power button, I get a black screen and the fans and leds of power.  No MESSAGE or BIOS.  The LED caps lock flashes very slowly 3 times and then the unit resets.  When she comes back, it's the same thing the fan on, black screen except the CAPS LOCK led flashes slowly and continuously.

  I tried to disconnect the battery and AC and hold the power button / stop and most other Councils (removal of material, etc.) on the websites and the service.  (except those overheating).

  I guess that the motherboard or processor are defective.

  The mobo is 578053-001.

  The processor is AM80577T4300.

  As I have these out, I thought I would upgrade one or both.   What is the combination of both that I can put in the CQ61-214TU on an empty stomach.

  Thank you

  Here is the Manual:

  Manual

  The motherboard list you does not appear in the manual, or is the processor, although the official HP specs also show that you have the Pentium Dual Core T4300 processor and this motherboard withdraws as a motherboard Intel CQ61. Fastest compatible processor is listed as a P8700 2.53 GHz.

  This is a replacement for your motherboard:

  http://www.eBay.com/ITM/HP-Compaq-CQ61-G61-Intel-motherboard-578053-001-test-OK-/251048516886

  And here's a P8700:

  http://www.eBay.com/ITM/Intel-Core-2-Duo-mobile-processor-P8700-2-53GHz-1066MHz-3M-CPU-OEM-P8700-OEM-/280921175424?PT=CPUs&hash=item416834f580

  Your laptop has nVidia graphics and is as good as it gets in this series of laptops, which is not a high end machine. So if you get the P8700 and a duplicate of your Board, you'll have the max hardware you can get. I have a question putting almost $200 in it, but it's your call.

  If this is the answer for you, please click on accept as Solution so that others can find it on the road.

• monitor gets black screen

  My monitor guard rethink a black screen when I turn on my computer, basically when I turn it on I see start for half a second, then I get the black screen while my monitor is always on

  Now, I recently built a computer, put it a few days ago the same thing happens, I didn't install anything don't not even windows 7 yet, but when I turn on the computer I get the black screen again, I can not install windows

  My brother and his friend think it is the graphics card, but when I built my new computer black screen continued to occur. If I turn my screen I can see my screen for half a second, and then it just goes black again.

  Yes I checked the cables for the monitor, I have even plugged into my laptop, and the same thing happened to the monitor

  So I was wondering... What is the cause of the problem? my brother think that theres something wrong with the new parts, I think it's the monitor that is causing the black screen and I have to buy another... What is it?

  Hello

  Since the monitor displays the same black screen after connecting to a laptop, this might be a problem with the monitor. Contact the manufacturer of the monitor on this issue.

• Just get black screen on Acer Aspire 7520

  I'm looking for a solution for this problem for almost 3 months now. My Aspire 7520 when tuned to just gives me a black screen. I took out the battery and held the power button down / stop and always the same. I also made sure that the fan has been free of dust and is runnig and I hear that it is trying to load, and now when I turn it off it is itself so I have to remove the battery all together.

  If you get either of the image on an external monitor, it could very well be a video card problem or a problem with the motherboard.  You should contact your local service centre Acer for assistance.

• Very slow to load the page Office getting black screen after the homepage at startup?

  On startup, I get a black screen with cursor after the homepage that it hangs for 30 seconds to a minute before the loading of my office and after that everything loads very

  fast? can someone help me with this please.
  Acer laptop 500hdd, mem 4 GB, vista sp2 Home premium 32-bit
  
  
  Gerry

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore
  It only needs to be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI
  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I uninstalled AutoCad 2013 after reboot I get black screen only. Windows 7 Explorer does not start

  I uninstalled 2013 autocad and autocad inventor of my laptop. I have windows 7 Home premium. Once the pc is rebooted, I get only a black screen with my curor. I tried to start in safe mode, but is samething.

  See if you can get to the "Startup Repair" via the F8 startup screen or your Windows Installer media if you have an installation DVD.  Try to run the "Startup Repair".

  Startup Repair.

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing system files or damaged, that might be preventing Windows to start.

  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx#EFF

  How to use the command prompt in the Windows Vista recovery environment
  http://www.bleepingcomputer.com/tutorials/tutorial147.html

  You can even try a restore of the system of this environment.

  With the help of the environmental recovery of Windows 7 or Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial142.html

  How to use system restore to log in Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/