Renders the information constantly displayed in the program monitor

Similar Questions

• During the insert, the program monitor does not display the adjacent images

  On page 207 of the manual, it says:

  The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images

  in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.

  When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?

  This works when you drag the movie, not the program monitor.

• Clip displays only when moving in the program monitor

  From CS6, I'm putting in tune with first CC 2014.  I noticed that when the zoom level select anything less than 100%, the element in the program monitor goes black when he doesn't play.  In other words, if the level is set to the Fit or 75%, I can't see him once he stops playing.  Has anyone seen this behavior and most importantly, can you tell me how to correct?

  Thank you!!

  I'm happy to announce that I suspect to be a problem of setting is proven true.  Activation of the grid 'transparency' by clicking on the two key in the source monitor and program fixed the problem.

• Export lack contrast compared to the program monitor

  First of all; I'm running on Windows 10 first CC 2015.1 and using a GPU Nvidia GeForce Ti GTX750. I use Dell U2412M twins IPS monitors that are calibrated using a Spyder4Pro.

  Any codec I export to it always seems to be the same discrepancy between what displays the program monitor (as well as the preview to export) and video after export. I used VLC, the native Windows! 0 Reader (film & TV), Quicktime and HTML5. I have all these images will appear less saturated and lacking in contrast. Play exported images on an other machine parts, even relatively faded image.

  I've been reading a lot of posts on this topic, seems to be a common problem, and try to find a solution that works, none of the suggestions I've read have solved the problem in my case.

  • I checked the settings in the Nvidia Control Panel, everything is configured to use the Nvidia settings. Returning to the video player settings makes it even more flat.
  • The only one who came close it is make some additional adjustments when exporting via the effects tab. However, it's something drastic workaround with the overcompensated preview.
  • It isn't just Quicktime that has this issue, it is in all areas.

  Y at - it a setting I have not spotted, either during the export process, or to set the display within the first I missed which would give me a parity between the preview that displays the monitor program and exit? This seems a little silly that the Visual tool used when the color correction and classification of images seems to be a rule in its own right...

  Below screenshot shows the same part of a few images, VLC on the left and the program within the first right monitor.

  

  Thanks in advance for any idea on this issue.

  After a little experimentation this morning, I think I can find the answer. I use some Look of Tom Antos LUTs as part of my process of dimming on my current project. Without these elements in the equation for the difference between the program monitor and images exported in VLC is almost the same makes no difference.

  It is interesting export a file from .cube since Lumetri color Panel with everything Tom Antos LUT applied and then using this file in the ranking. .cube seems to cure the problem. There must be either something wrong with the formatting of the original Tom Antos LUT where changes to the image have been applied in the program monitor but were then omitted in the rendering process. Tom Antos READ appeared in or an earlier version of the first, and there is a kind of incompatibility. Anyway, to re-record the LUT as a native first CC 2015.1 .cube file seems to fix the problem.

  I take this opportunity to thank R Neil Haugen and J. Simon for their valuable input

  I hope that don't cross is not all 'line in the sand' marking my own answer to my original question as the answer...

• The program monitor

  My program monitor only part of the image shows, is different from the source monitor and I do not see the whole picture proporply I'm editing.

  Magnification is set to the Fit; Resolution of reading is complete.

  Is there something I can do?

  Welcome to the forum.

  As David asks, more information will be useful. Please attention to provide pixel x pixel image size for your Source of the layer film (also list the PER - Pixel Aspect Ratio) and the size of the image in the sequence. There is most likely a mismatch somewhere.

  In addition, the Source monitor panel simply displays the Source of the layer footage, regardless of the sequence/project, in which it will be used. The program monitor takes into consideration this sequence and show, compared to this sequence.

  Good luck and please let us know a little more. I think that the solution to your problem will be in these responses.

  Hunt

• First CC - the program monitor goes black after a few minutes

  Hello

  
  I have the following problem:
  After 5-10 minutes, the program first DC monitor (2015) becomes black. The sequence and any remains intact, I can still do everything, but it does not show on the program monitor. When I restart first nothing is deleted or changed in any way that I myself.

  Technical information:
  I use Windows 8.1, 12 GB of RAM on 2 TB of free space on my hard drive and an Nvidia GeForce GTX 650.

  I would be very happy if anyone of you could help me with this problem because it's really in the way of my workflow to restart every few minutes.

  -Clara

  Thanks for all the help, but fortunately, the problem disappeared after the new update and I hope it stays like that.

• When I stopped my project, in the program monitor window appears red and yellow bars... why

  When I stopped my project, in the program monitor window appears red and yellow bars... why?

  It is a problem with the captain to loosen then off material MPE.

  The next time you post a question: FAQ What information should I give...

• Why my subtitles appear in the program monitor?

  Howdy!

  I'm doing some captions, body CC 2015, horrible on a video with an audio track.  I created the subtitle file, turn on the display of the legend on the program monitor and made sure legends I created (just a little far) are activated without a doubt too.  When I saw the legends in the monitor, I exported just the section captioned a. MOV file, with embedded captions once and once with them "engraved" on the video.  The subtitles are displayed, even if they are a bit of a mess (spaces, etc.), so I know that the first known legends.  So... why they do not appear in the program monitor?

  Any help appreciated!

  (- Jim 8 ^)

  Looks like that the first default - folder > new > legends > video settings > new legends

  default values for the Standard CEA-608

  and the program, the default monitor - key > legends display > settings > CEA-708 Standard

  Thus, with the legend, the program monitor's two default settings does not appear

  for me to have the subtitles to display in the program monitor, I had to 'match' standards of legend

  but, what happened to change the font size? Are you able to do? I thought I read in the legend help first, this type of policy, the size, was editable, so am I missing something?

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• The program monitor empty composite video.

  2 x 2.26 Ghz Quad Core Intel Xeon

  16 GB of DDr3 memory

  2011 mac Pro

  DeckLink Studio 4 k audio and video output running at the receiver and external controller

  NVIDIA 5770

  Graphics NVIDIA Quadro 4000 card

  The program monitor is empty. I've got audio of counting. I can get staff to record the signal, but in composite video, nothing comes through. The video and audio signals are through my card of cause on an external monitor and speakers, but the program monitor is just empty.

  I tried restarting the computer and the creation. Check the updates of drivers Cuda. 6.1.18 running

  Already old version 6.5.14 but the problem persists.

  Tried to create a new project.

  I tried different video settings for the sequence, but all behaving the same way.

  I can't video playback in my UI for the source or video monitor.

  Help, please.

  Contacted support via chat. Is that the rendering engine has been set to OpenCL rather than Cuda. To do this, go to 'file/project settings/general' at the top of this is the rendering engine of access. If it isn't on Cuda and you Cuda, then you will not have playback. Problem solved. I feel stupid, but there is the answer if someone else needs.

• View of ExternalMonitor of the 'monitor Source' to "The program monitor" switch?

  It worked well in CS6, but I went to first CC and my external monitor is displayed the contents of the 'monitor Source' of first only, not "the program monitor. When the monitor of the timeline or program is selected, the extrenal monitor is black. But slecting monitor Source plays very well on the moitor extrenal (via SDI connection)

  How to switch to display the signal from the program monitor my external monitor rather than the Source monitor?

  Configuration of the Tech: using Blackmagic ultrastudio mini monitor to send the SDI signal. Installing the latest driver for the Blackmagic ultrastudio, approved for Adobe CC everything works perfectly in first CS6, it is a question within the first CC.

  Thank you!

  Change the fields option in the settings of the sequence to 'No fields (progressive scan)' fixed.

  Thank you!!!

• The program monitor shows nothing

  I just got CC and started to edit a project that I had initially started on another computer in the trial CS6.

  Open the project, he has converted format CC, find the files and everything. When I preview the it, the program monitor shows black, but audio parts. I tried with a new project and add a few titles and still nothing in the program monitor. When I exported the media, he appeared correctly, but forecasts were black.

  No idea how I could fix this? After Effects displays previews very well, QuickTime seems to work without problems, and I'm a little lost.

  EDIT: Checked the file Adobe Premiere Pro preview files: there is a file called Untitled.PRV (my project is untitled) which is empty. Shouldn't there be something in there?

  Running on a new computer, 8 GB of RAM, i7-3630QM 2.4 GHz, 2 x GeForce GT650M, etc. I don't think the specs are the cause.

  Thanks for this tip. Read all over the web; It turns out that the codec packs is bad (I didn't) and decided to uninstall those that I donwloaded. First is always present, so it was definitely a driver problem.

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• Problem with static in the program monitor when images paused

  Hi all

  I'm working on a combo video / image editing. The video is 1080 p 24 p shot by my digital SLR T2i.

  The images are larger JPG (appx 5000 x 3500). I'm using a very soft pan / zoom on the images when they come into the frame, that's why I wanted to keep the larger size (so it can fall down space of 1920 x 1080 and not reveal and background black).

  In any case, when reading, everything seems OK, but when a break on an image, the program monitor displays garbage. It will show you a mash of colors, anything that looks like the original image. Back scrubber or playing back the image, but a break on this subject shows nothing. It's painful because I need to "guess" where the image for the pan / zoom effects since I can't as it is blurred.

  Looks like almost for a long time when you do not have a television station and you have white static.

  I have to add my system:

  Core i7 3770 k

  Card mother ASRock z77

  GTX570

  16 GB of RAM

  Further, this probably has to do with the size of the image. I just had an accident as well of my Nvidia driver; and found that this related thread:

  http://forums.Adobe.com/message/4259487

  Start by reducing the size of your images to not more than 2500 x 1750. It will make for an experience of editing much snappier, reduce the load on your system and allow some soft pan and zoom.

• Last image is "stuck" on the program monitor.

  When you edit a sequence, for some reason, where there are gaps in my timeline, the final image seems "stuck" on the program monitor. In fact, it is if I select any image of the clip in my sequence, and then click an empty space and black on the timeline, it shows that the framework I finally got on the program monitor.

  The only way I got around it so far was fade to black or close and reopen the sequence, and it comes back as soon as something is displayed in the program monitor.

  Any ideas?

  Thank you.

  Welcome to the forum.

  Why are there gaps in the portion of the video of your sequence? Those that can cause all sorts of questions. If you have black, where you have gaps, rather to insert pieces of video Black (created with the new icon on the bottom of the project Panel - black Video).

  Good luck and if you remove those gaps, see Ann Bens TUTORIAL.

  Hunt

• The program monitor - I'm not seeing full clip during playback

  I am worried real!  After days of my life, import video and editing-and then trying to solve my problem to see only part of the fastener back playing in the program monitor that brought me to your site.  I spent hours looking at your posts (and indeed Adobe help pages) is trying to solve this problem and clearly my sequence settings initial (I think!) were wrong.  Maybe I can come back because I really don't know how these values are set correctly.  My original question please, if I finish my editing and then export this file, will I see again that part of the clips in the final version, or will I see all of the original clip?

  Some information:

  -Windows 7

  -Premiere Pro CS4

  -Program monitor setting is 'fit '.

  -aspect ratio 16:9

  -PAL (based in the United Kingdom)

  -Camcorder Sony HD - SR12E

  -1920 x 1080i HD

  Phew, hope this is enough Info for you "kick start" me!

  Thank you.

  Best regards, Doreen.

  From the looks of it reviews, the camera probably records in 1920 x 1080, so it is likely that you need the 1080i25 not anamorphic, preset (50i) AVCHD.