Repair disk Vista not working does not and cannot correct the disk error

Similar Questions

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB _ @_. _, Thank you

  Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you

  How does this relate to the features of Windows Update?

• Updates do not install, Sections of Vista does not and cannot start the Audio Service

  I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

  boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

  My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

  any help? Please

  Hello
   
  a. updates have you tried to install?
  (b) button to switch on the audio of your computer are you using?
  c. what exactly happens when you try to run any audio/video file?

  You can try the steps outlined in the article below and check if this help.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  You can also try to update check you and sound card driver if it works. The article below will help you do.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, check if the following services are set to automatic.
  a. Windows Audio
  b. Windows Audio Endpoint Builder

  Here's how:
  1. click the Start button, type services.msc and press ENTER.
  2. go to any services mentioned above at the same time, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  After return to that exact error messages we can help you better.

  Let us know if it works.

  Kind regards
  Umesh P - Microsoft Support

• Re-installation of operating system could not and cannot start the current operating system?

  OK to start, im using xp, I wanted to reinstall xp using the dvd I got with it. then I ran xp and has not clicked upgrade, instead I clicked on new installation. after it is finished, restart the pc and I went to the configuration screen. I went straight through and as soon as the transfer of file thingy started, he started saying missing files. Now I can't load up to new os or go on current...

  UPDATE: I don't know how to use R, the recovery thing console but I really want to format and make new ones

  UPDATE: after you press ENTER, im jumping directly to "ATTENTION: a/windows folder already exists that may contain an installation of windows." once I have press l to use the folder and delete existing, everything breaks down...

  Boot from cd of Windows XP, and then delete all partitions and then begin the installation

• Right button on the touchpad does not and cannot change the setting of what happens when the laptop is closed

  I own a HP Pavilion, under Windows Vista Home Premium, with 2-way ALPS Touchpad, I updated the touchpad driver and tried to change the options of the right button but nothing has helped.    Also, how can I change the settings for when I close my lap top

  Try the right key when it is started in safe mode or with a clean bootor maybe when logged in as a different user.

  Change the cover closing the settings by going to control panel-> Power Options-> choose closing the cover.

• Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

  Original title: cannot run Windows Update

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  To disable the horse notification that appears in the status bar on automatic updates is turned off.

  Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

  [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8

  http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

  [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

  visit windows update via the shortened link in your Start menu.

  When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

  [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

  Report back please on the status and please report problems with error codes. Thank you.

  Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

  Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Firstly - I work in InDesign CC 2015.

  My problem is, I had this 10 page document, which, on every page, shows an object that must be in PDF format - but do not print. I made this object into a button and unchecked "Printable". On top of this object, I made 10 hyperlinks (separate layer) that point to the page 1-10.

  When you export the document and I use the interactive PDF format , works ' show nonprinting object but do not print ' well, BUT hyperlinks don't. If I uncheck the "layer of nonprinting objects" in the file PDF, then hyperlinks work, but the problem now is that the nonprinting objects are invisible...

  When you export the document and I use a PDF to print the "unprintable object show but do not print" does not work BUT the hyperlinks don't...

  I put hyperlinks to post a link to pages and also tried the link to the anchor text. No difference.

  So my question is: How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Thank you

  Mette from Denmark

  I swapped my links to the buttons - AND NOW IT WORKS; (o)