repair for HP touchsmart 600-1350

Similar Questions

• TouchSmart 600-1350: what is the REAL TouchSmart 600-1350 RAM Specs?

  I see HP screwed up once again, big surprise there!

  Specification of RAM TouchSmart 600-1350 (citing the HP site):

  200 pins, DDR3 SO-DIMM

  Since 200 pin SO-DIMM is really a standard DDR2 and DDR3 is a 204 standard pins, I chose best educated guess one that suits and matches at speeds and tensions with the computer of my client for the upgrade. We ordered 2 Kingston PC3-10600 off 4 GB Max computer modules, but guess what? It don't work!

  Given that HP can't even say DDR2 DDR3 standards, can someone at HP who really knows what is up please tell me the specifications of memory live CORRECT for this system? Perhaps eventually make corrections to specifications of systems page too. Beyond that, a refund of $40 to my disappointed customer would be too big, but I not holding my breath!

  Anyway, why did 2 4 GB Kingston 204 pin PC3-10600 modules work? Normal blood pressure, nothing special...?

  Hello:

  Based on my experience, any HP PC with an Intel series 5 using portable memory chipset... it must be VERY specific with what you get memory.

  Please read this post related about this submission, in my view, that you have to buy...

  While it is a laptop, he uses the memory of the laptop and has a chipset Intel 5 series like the one you are working on.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/memory-upgrade-6550b/m-p/5340551/highlight/true#M63185

• upgrade the video card for HP TouchSmart 600-1120 or renounce FF XIV

  We just bought the HP TouchSmart Desktop PC 600-1120, and now, we found that we cannot play FFXIV top because he has the wrong video card.  He needs an NVIDIA GeForce GTX 460 video card.

  Can we change the map?  It will mess up of the touchscreen?

  This model does not support the upgrade of the GPU. The touchsmarts use the Integrated GPU and do not have expansion slots required on the motherboard for adding a video card.

• HP Touchsmart 600-1000: feet for HP Touchsmart 600-1000

  One of the legs on my Touchsmart broke and I can't find the part number to replace it. I need the part number information you and possibly where I can find. I want to go ahead and replace both sides.

  I searched for a while and I could not find it. Ironically, after posting my question, I found this. Just in case where someone else needs too, it's here: 537410-001

• Audio problems with Touchsmart 600-1350

  Recently, I noticed that my audio icon showed muted.  When I hover over the icon I see "no Audio output device is installed".  I tried everything I know to do, I reinstalled the drivers, downloaded and installed new drivers and followed all the instructions on the HP Web site help.  Another thought?  If so, can we install a new card RealTek?

  Thank you

  Hello Silverfish1,

  Thanks for the quick response!

  From the information you provided in your post, I recommended to perform a backup and restore your system. To do this, please follow this document on the backup of files (Windows 7) , and more to perform a recovery of the system HP (Windows 7). This should help to restore your system to factory settings.

  If the problem persists, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Best regards!

• Blue flashing and close issues on Touchsmart 600-1350

  I just started to notice a blue light flashing/blinking on the right the speakers to the computer base.  Can someone tell me what this is about?  In addition, at the stop and try to close programs, the computer sometimes appears to 'freeze' - what I see is a part of the office and I can't do anything but press the button close.  Of course, my warranty has expired there is a month that's why I put these questions on the Forum... Thanks for any help I can get out there!

  Hello cindymazz:

  Blue light you see flashishing is your Wifi transmitter. It blinks because it turns on and turns off. Ma has done since the first day. Now for the gel to the top. Please open HP Support Assistant Cick on bottom of the first screen arrow, and then click on keep. The next window click tune up. The veiw in the next window click settings. Now, click on click here view, select or hide the tasks of development. Now, please check all the boxes box, you see. Click on apply, then ok. Return to the previous window, click tune up. Once started, you should see the red and green circles moving toward the bottom of the list. Can last for 1/2 hour to four hours to complete depending on the size of the deletion of the temporary files and what is on your computer. Now, after this has been done. See how your computer is running. If the freeze ups still continues.

  Then run a check disk on drive c. click on my computer. Then click Properties C.drive now, click on the Tools tab click check now. Next box to check both boxes. Close evevy thing and turn off the computer and restart it. Takes about hour to three hours to complete. This should solve ups freezes your computer.

  Now for your Internet Explorer, you can reset, click Tools go to the bottom of the list, click Internet Options, click on Advanced tab click Reset. Close Internet Explorer open it again. All together now. Try to run the melody of PC in less than twice a month. Several times you use less time to complete. Your welcome. frrw

• TouchSmart 600-1350: dvd not recognized or working

  I forgot to add: DVD after I try to uninstall and then action the message I get includes the fact that configuration in the registry information is corrupted or incomplete.

  Hello:

  The only suggestion I can offer is to try each of the troubleshooting steps, 2, 3, 4 and 5 from the link below.

  http://support.Microsoft.com/kb/314060

  One of them should solve the problem.

  #2 is the best thing to try first, then just go down the line.

• Desktop HP TouchSmart 600-1205: HP TouchSmart

  Hello, I wanted to know if there is only a varsione updated TouchSmart suite for windows 10.
  After the upgrade from Windows 7 to Windows 10 icon no longer works.
  I thank the glance

  Hello

  There is no windows 10 for HP Touchsmart 600-1205it driver

• TouchSmart 600: Low battery for the keyboard will not disappear

  After upgrade to windows 10 in PC all-in-one TouchSmart 600; whenever the PC wakes up from sleep mode, low battery for the keyboard warning message appears despite the fact that the batteries are new.   The message 'form' has no way of closing other that "remind me later".

  Solution: new keyboard, Logitech > bought.  Must say that I was so tired of the current fake e-mail I just replaced my HP keyboard and mouse with another third-party.  Thanks for all those who have responded or tried to help.

• My desktop HP Touchsmart 600 computer: My HP Touchsmart 600

  Desktop HP Touchsmart 600 has a about 5 inches square dead spot on the top left corner of the screen.  Is this a problem that can be easily repaired?  If so, can it be repaired locally?

  Thank you...

  Bruce

  @ButchBob, welcome to the forum.

  If your computer is no longer under warranty, I suggest you find a computer repair shop known locally to see what they have to say.  It shouldn't be too difficult for them to fix it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP TouchSmart 600 - 1070 has blocking of overheating?

  I am repairing a Touchsmart 600-1070a who suffered a fall from his office (damaged the on/off switch, but that is fixed), already replaced the HARD drive that had bad sectors.  There seems to be a lot of cumulative small hiccups, including;
  
  * sometimes not even bring to the top of the screen on powerup, remains black despite the fans running, power light.
  
  I suspect that it is a matter of gfx module or connector problem, as I loosened and forced the GFX module in its unlocked connector and reinstall the graph LVDS lead and - apparently - to have solved the problem for now.
  
  * for execution, will crash intermittently Win7 and how the region of radiator for chipset is exceptionally hot (about 50' C) and it is with the metal plate still attached.
   
  To do this, I don't know what approach to take.  There is a spacer between the heat sink for this chipset and the metal casing that is filled by a heat-carrier pad.  My suspicion is that the pressure of the arriere-stand against the metal actually requires chassis-pad-heatsink to stick, but I think now that the cushion is probably due to replace or another option sorted as things are just not too hot
  
  Someone else had a similar problem?
  
  The GPU and CPU radiators have all been cleaned with compressed air / brush and work correctly.
  
  (photo showing the motherboard exposed without the metal support pregnant.  The radiator in question is orange, one located in the center of the motherboard near the memory.
  
  

  I placed a layer of transfer thermal padding that is normally used between transistors/MOSFETS and sinks of heat, about 1 mm thick, on top of the orange radiator - seems to have now settled the system down, played a video DVD and YouTube full length at the same time without crashing.
  
  So now, we have chip|heatsink|transfer-padding|pale-transfer-thick-padding|metal-backing.
  
  Active cooling a bit more would have been nice in the form of a fan from somewhere, but as long as it doesn't crash, I guess.   Metal case houses approximately 49' C around the location of the radiator.

• HP Touchsmart 600-1105xt - PCI card

  Hi - I am trying to add support for USB 3.0 to my TouchSmart 600-1105xt system and I found that there is 1 slot mini-PCI express. However I have not sure how to add to my system. Its different for a touchsmart since all are crammed into a small place and I don't know how to expose the PCi Card without breaking anything. Any help is appreciated.

  There is NO external ports,

  you will have to completely disassemble the unit to join the mini-pci slot which normally has the TV tuner in it.

  As I said, this is not repairable.

• TouchSmart 600-1055-Message of disk error hard hd521-2w

  I have a Touchsmart 600-1055 is our guarantee. I am running Windows 7 (64-bit). I have hard to start when the computer hangs at the Windows screen. I was able to carry out repairs and after many attempts it finally began. I ran the test of the system and the only test that failed was for my Smart hard drive test and gave the code of hd521-2w. I guess that means that the HD is about to go. Am I wrong? And if yes, what is the replacement and can I upgrade to 2 TB and when and where can I find instructions on how t it? Thank you!

  Hello:

  Yes you are right. The hard drive has virtually disappeared.  Back up your files.

  I would go no larger than a 1 TB HARD drive.  2 TB might work, but it might not.

  SATA II 7 200 RPM desktop drive, that's what you need to replace with.

  Here is the link to the guide of upgrade and maintenance.

  http://h10032.www1.HP.com/CTG/manual/c01895538.PDF

  You will also need a set of discs of recovery to reinstall the operating system and the programs that came with thePC.

  Paul

• TouchSmart 600-1050: touchsmart 600 1050 installed new drive sata, how can I recover disc windows 7OS home prem w/o OS

  How to recover Windows 7 Home Prem OS, after original hard drive failures. I replaced it with a new HD, but can't boot OS and does it have any disk recovery Touchsmart 600 1050, it was purchased nine walmart 2009 by me, prior to this accident, the cd/dvd-rom failed and never returned.

  The new hard drive should be of equal size or as to what you had and not the format of the AF.

  You will have to order recovery disks, if you live in the USA/Canada, call HP at this number 1-800-334-5144 and see if you can still get a set of recovery disks.  Otherwise the site worldwide: http://welcome.hp.com/country/w1/en/support.html

  If HP does not have the discs, you can get them at the computer the surgeons who have them:

  http://www.computersurgeons.com/p-18105-recovery-kit-gv405av-for-HP-model-number-600-1050.aspx

  Needless to say that you cannot get them on USB key that you must repair your CD/DVD drive to use the recovery discs.

• HP TouchSmart 600: HP TouchSmart 600 does not power on and flashing lights

  Hello

  Need your expert help! My HP TouchSmart 600 won't turn on. The lighting at the bottom of the screen will flash green. It worked fine the day before. Is it the motherboard? Or a power supply problem?

  Hi @YUL_TechWriter,

  You can go surf part HP

  On the right, select the country

  In the quick search, enter the serial number and it came with the part for this computer list.