Repair Microsoft error message unexpected error cannot run

I downloaded MS fix and tried to run, but get the error message that says: "an unexpected error has occurred, Wizard cannot continue.

I am running windows xp.

Any help here?

Thank you

You can post in the fix it Center forum here:

http://social.Microsoft.com/forums/en-us/fixitcenter/threads

You must have at least Service Pack 3, use of the center of Fix-it.

I think that you also more have installed on your system at the MSXML 6.0 parser (check in Add/Remove Programs).

You can tell them that in the new thread you create there what the problem is that you try to fix and the Fixit you try to get to work.

Small details like this are useful.

I have never personally seen a fix it solve anything but maybe they work sometimes.  What would we do if there is no solution its?  Fix it yourself

If you want to continue your question on here without using the not specified fix it, do this:

Provide information on your system, the better you can:

What is your system brand and model?

What is your Version of XP and the Service Pack?

Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

The afflicted system has a CD/DVD drive work?

You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

What you see you don't think you need to see?

What do not you think that you should see?

If the system works, what do you think might have changed since the last time it did not work properly?

Tags: Windows

Similar Questions

  • ASP - function Remote - error: cannot run the trigger

    Hello

    I tried to get my macros being run by a remote server.

    It's my function file remote named "remote_test_pc.asp":

    framework integrated; then

    conf t

    interface $INTERFACE

    Description macro $TRIGGER

    PC-VoIP-Port Description

    switchport access vlan $ACCESS_VLAN

    switchport mode access

    switchport vlan voice $VOICE_VLAN

    broadcast storm control level 1 k pps

    multicast storm-control level 2 k pps

    Storm-control action trap

    no event log status link

    bandwidth share SRR-queue 10 10 5 75

    form of bandwidth SRR-queue 10 0 0 0

    priority queue

    MLS qos trust dscp

    no link-status of snmp trap

    spanning tree portfast

    spanning tree enable bpduguard

    service-policy input PO_TRUST-PHONE

    output

    end

    FI

    framework integrated; then

    conf t

    interface $INTERFACE

    No description of macro

    Description by DEFAULT-CONFIG

    switchport mode access

    switchport access vlan 999

    broadcast storm control level 1 k pps

    multicast storm-control level 2 k pps

    Storm-control action trap

    spanning tree portfast

    No switchport voice vlan $VOICE_VLAN

    bandwidth share SRR-queue 10 10 5 75

    form of bandwidth SRR-queue 10 0 0 0

    priority queue

    MLS qos trust dscp

    no service-policy input PO_TRUST-PHONE

    FI

    output

    end

    FI

    And this is my config on the switch to mac-group and the macro:

    !

    macro auto Test group address-mac-PC

    Mac 0019.9990.5509 address list

    !

    comprehensive treatment of the auto macro

    macro auto control global detection mac address

    !

    automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127

    !

    When I plug this workstation for the following syslog messages:

    Switch #.

    Remote_test_pc.asp loading!

    [OK - 1702/4096 bytes]

    Enter configuration commands, one per line.  End with CNTL/Z.

    Switch con0 is now available

    Press RETURN to get started.

    Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function

    26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console

    26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message

    Switch #.

    The port works as it should, but I wonder about the error message.

    The switch is 2960 with IOS 12.2 (58) SE2.

    Can someone explain what this means?

    Thank you very much!

    Sven

    Hi Sven,

    I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.

    Thank you

    Ankur-

  • Error: Cannot run program "jar": CreateProcess = 2 error

    Hi all

    I create a BlackBerry App... All this worked fine until there are times... Now when I agin tried to run during the packaging of the app has been mentioed below error...

    "Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified."

    Why it is so? Please help me...

    Best regards.

    You can search for java 7, I had problems with it and re-installed java 6 for bb dev.

  • Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

    Hello

    My apps works very well for the current code, but if I add a new function or class in my eclipse application code indicates the error of

    Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

    I searched the forum and google for this problem, certain solutions are related to java path but myjava path is ok as the current code works very well

    So what problem here? and whats solution for that?


    has got the solution to the problem of its need for .jar files path previously I did not understand why he neede path of pot now his reason is here

    http://supportforums.BlackBerry.com/T5/Java-development/I-O-error-cannot-run-program-quot-jar-quot-C...

  • [HELP] I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

    Hi, I'm new developer on the Blackberry platform.

    I make the first application, but there is a problem when I wanted to install in the Simulator.

    My application has several screen and each take the server data, analyzing the data and displays on the screen.

    My problem is any executable thread.

    When I'm using the code below, it is fine. My application can work perfectly on a simulator.

    public TestingScreen() {
       // Runnable thread = new Runnable(){
       //   public void run() {
        // TODO Auto-generated method stub
            // my code get data from server
            Dialog.alert("Hii");
       //   }
       //};
       //new Thread(run).start();
    }
    

    but, if you use floor area or UiApplication.getUiApplication (.invokeLater), I got error "i/o Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified"

    public TestingScreen() {
       Runnable thread = new Runnable(){
          public void run() {
        // TODO Auto-generated method stub
            // my code get data from server
            Dialog.alert("Hii");
          }
       };
       new Thread(run).start();
    }
    

    I have the 11 screen and all have executable statement and works perfectly. Can run in the Simulator, can get data from the server. But when I create the new #12 screen (copy paste other on-screen), page couldn't use an executable statement. Each I use Runnable/thread, I got error. But when I remove an executable statement my work normally requires.

    I already have Google but I do not get the answer.

    Please advice. Thank you very much.

    Kind regards.

    hrnt, thanks for your answer on this issue. It helped me solve my problem as well.

    Just to add, for someone else, I use the 32-bit and changed Java SDK my way to the bin folder where the SDK was installed.

  • I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

    I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

    Why is the error, how to fix?

    File jar.exe. For example, I have a copy of it in C:\Program Files (x86)\Java\jdk1.6.0_24\bin

  • I/o Error: Cannot run program "C:\Program": error CreateProcess = 87 using ant

    Hi guys,.

    I'm trying to build my console application using Ant. It is a part of my build.xml

       
    
            
            
                
                
            
        
    
        
            
                
            
            
            
        
    

    When I try to "build Ant" I get this error returned:

    I/o Error: Cannot run program "C:\Program": error CreateProcess = 87, the parameter is incorrect

    referring to this line:

    
    

    I tested the names of directory and environment variables all (the variable

    ${46.jde.home}
    

    too) is set correctly, but the error is still there... How could I solve this problem?

    Thank you very much

    Sometimes, the length of the path give birth this error but I have not seen in a while. I ended up installing most of my OCD: \RIM apps to avoid path issues all together.

  • How to acess, Skype profile to set parameters when crash anotification come tell me that the error cannot run

    original title: Skype

    How to acess, Skype profile to set parameters when crash anotification come tell me that the error cannot run

    Hello

    The question you posted is more appropriate for support help forums Skype. I suggest you send the same on the following link for assistance:

    https://support.Skype.com/

    I hope this helps.

  • Hardware Certification - audit gives an error "cannot run processSetup for configuration: cannot run createHOMObj for configuration: no GuestOS section in the XML file.

    I tried to set the session established the IPs VMs / host / FQDN / VM names

    but each time got the error "cannot run processSetup for configuration: cannot run createHOMObj for configuration: no GuestOS section in the XML file.

    I changed the names VMS in vCenter for FQDN and it solved the problem.

  • Getting error: cannot run on the development web server configured

    I installed Visual studio 2012 and IIS 7 on Windows 7 Ultimate version. I get the error message 'Cannot run on the development Web server configured' and 'Impossible to run IIS Express' when I tried to run a web application from VS2012. If anyone knows how to fix it please tell me.

    Hello

    It is not a community forum for VS.

    Try the Visual Studio Forums

    Visual Studio development category:
    http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

    Don

  • Vista backup error: cannot run the RPC. (0x800706BE)

    Hey there, I have a question about windows vista. I'm doing a backup of my system. In the end, I get an error saying: "cannot save settings to schedule automatic backup for the following reason: cannot run the CPP." (0x800706BE).

    However, I don't want to schedule an automatic backup. I want to make a single backup. I tried to change this in windows Task Scheduler, but I can't because the WindowsBackup folder is not listed. Probably because there is no backups on demand. But I can't schedule backups since I get an error at the end. So the WindowsBackup folder does not appear and I can't change the settings. Someone knows how to fix this?

    To be clear, I want to make one backup of my system.

    When I go to services.msc and scroll down to the remote procedure call and watch 'Status' it says 'Started' or 'Released' (not sure since I have a Dutch version of Vista).

    Also, windows backup is not calculating the number of necessary for the backup dvd.

    Thanks in advance.

    Bottom of GR

    Hi Fazil,

    Thanks for the help. But Vista gave me more problems, not just this one. A few days ago, I decided to upgrade to Windows 7. Problem solved.

    Thanks again.

    Bottom of GR

  • Error-cannot run the file: iexplore.exe. ShellExecuteEx failed; code 2.

    Hello, my pc is very slow, and then restored the system.
    And I had to delete the game 'perfect world '. I had Setup, install and went again. Except that this error when you have completed installation:

    Cannot run the file: iexplore.exe
    ShellExecuteEx failed; code 2.
    The system cannot find the specified file.

    I tried "Run as Administrator" and also play with the "Simple Start" and continued with the error.

    Or find me in my computer the "iexplorer.exe".

    A friend told me that there is an error in the "System32" folder But I haven't changed it.

    What is this error? Can I format the computer?

    PS: I do not speak or write English very well. Sorry for mistakes in the text.

    Click Start, type: enable or disable windows features

    Press enter

    Uncheck Internet Explorer

    Click OK

    Restart if prompted.

    Click Start, type: enable or disable windows features

    Press enter

    Uncheck Internet Explorer

    Click OK

    Restart if prompted.

    Check to see if you can launch Internet Explorer

    If the problem persists:

    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: sfc/scannow

    This will check for any breach of integrity

    Restart your system

  • vCO error ' cannot run action 'cloneVM '.

    I worked on a small test lab and need help, solve what looks like a permissions issue. I'm running the VC 5.5, a single host 5.1 and 5.5 vco device.  SSO is configured with Active directory as an LDAP server and seems to work as I can connect to VC and vcO using my AD domain admin creds. In AD, I created a user called test generator, and groups of area as follows: VCO builders-builders Account Admins VCO - my Domain admin account - my account in VC these 3 groups are all set to 'administrators' to the root. In the SSO Administrators group, I added VCO Admins and domain admins. I added the VCO manufacturers group to the Group SolutionUsers of SSO, according to me, the question relates to how it collects card authorizations in VC. I tried to make the user a domain administrator, but he has not solved. I worked through this workflow http://www.vcoteam.info/articles/learn-vco/54-create-a-simple-vco-self-service-vm-provisioning-portal-part-1.html. When I run the workflow with my ad there all works.  When I run it as a builder, he fails once I answered the question of approval.  The error is "cannot run the"cloneVM"action, you have no right"execution"of which escapes me? "

    This occurs because the permissions are not inherited items that calls your workflow... It was mentioned in one of the comments to part 2 of this tutorial and part 3 of the series gives then further explanations and the steps needed to make things work.

  • error: cannot run two device installations

    Hello

    Whenever I try to install something I get the error Impossible to run both facilities, but I'm not nothing install at all. disable the firewall doesn't seem to help. I read somewhere else on a solution for xp, with regedit.exe. Is there a similar solution for vista or another solution? Please I really need and can't find any help on google or anywhere else!

    Thank you!!!

    Antonella

     

    Hello Antonella,.

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. what you are trying to install? It is a software or hardware device?

    4. do you have security software installed on the computer?

    5. What is the full error message?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you perform a clean boot and check.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error cannot run regsvr32 trying to open an old CD

    Trying to open a CD made in 1999.  I get an error message "could not execute C:\windows\system\regsvr32.exe."

    I just checked my system and regsvr32.exe is not located in the folder on server (which explains why it cannot be run).  It's obviously a lot more older version of Windows and the drive is not compatible with Vista.  You can try to use Compatibility Mode to see if that helps: http://www.vistax64.com/tutorials/75909-compatibility-mode.html, but I doubt it.

    Go to the website of the program and see if they have updated your version of Vista-compatible versions.  They can offer discounts or maybe even free patches or upgrades (I doubt it - but this is probably the only option if the above did not work).

    The only other option that MIGHT work is to set up a virtual PC - but that's a lot of effort and complication to spin this disc (and even that might not work if there is a potential).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for