Repair of bootcamp after having extended the Windows partition

Hallo

I have a Mac with windows on it.

I expand the partition for windows, first by spreading 10 GB of mac, I don't then open windows and look for the 10 GB he wanted, but could not open windows, the error occurring has been 'missing in operation.

When I use the following solution:

sudo fdisk e/dev/disk0s4

p

setpid 4

07

Pavilion 4

p

To write

There

After "sudo fdisk e/dev/disk0s4" it says "resource busy".

When I try to active the disk and partition in the windows repair utility, its says 'ACTIVE kan only be used on disk MBR.

Sorry for my bad English, I really hope that someone can help you.

What you are attempting is not supported by Apple - Boot Camp: resize the Windows partition .

Can you post the output of the following Terminal commands?

diskutil list

Cs diskutil list

sudo TPG - vv - r see the/dev/disk0

sudo fdisk/dev/disk0

The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

Tags: Windows Software

Similar Questions

  • Satellite A100: Cannot install recovery after having deleted the Ubuntu partition

    Hello friends,

    I have the Satellite A 100. I was using dual OS - windows vista home edition and Ubuntu. Now I wanted to remove Ubuntu and so I did the stupidest thing - directly delete the partition with Ubuntu which had the GRUB files. Then to the laptop computer restart of course the Grub bootloader wasn't there and if the computer is not started or load any OS. Then I thought that I will reinstall Vista with product recovery CD but the progress reached at 2% and then I keep getting error 1117 a failure to read. I tried so many times without success. I even tried to install XP, but it says Intel boot agent cannot make connection. And it also fails.

    Please help to reinstall Vista or XP. I'm really stuck and I learned a lesson not to tinker in mobile when it isn't those of Cup of tea!
    Any help is greatly appreciated.
    Thank you!

    Perkins

    > Now if I download EasyBCD how would I be able to run it or how should I use it?
    You will not be able to run EasyBCD because you are not able to boot Vista.
    EasyBCD can be installed only in Vista and will allow you to change the Vista Boot Manager.

    I think you need to format the entire disk HARD again should erase all partitions and must attempt to reinstall Vista.

    I recommend using a free tool called GParted LiveCD. Google for what it helps format the HARD drive!

  • Repair your startup disk Bootcamp disappearing after you create the new partition

    . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

    I didn't know it would affect my Windows partition that I thought it was completely different.

    So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

    I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

    (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

    For reference:

    Aerospews-MBP: ~ the marcuslo list $ diskutil

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 500,3 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_HFS Macintosh HD 350,7 GB disk0s2

    3: disk0s3 Apple_Boot Recovery 650.0 MB HD

    4: Apple_HFS 47.6 Untitled GB disk0s4

    5: Microsoft database BOOTCAMP 101,0 GB disk0s5

    Aerospews-MBP: ~ list of cs marcuslo$ diskutil

    No logical volume group CoreStorage found

    Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

    See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

    See the TPG: / dev/disk0: PMBR to sector 0

    See the TPG: / dev/disk0: Pri GPT to sector 1

    See the TPG: / dev/disk0: GPT Sec at sector 977105059

    start index size summary

    0 1 PMBR

    1 1 Pri GPT header

    2 32 table GPT Pri

    34 6

    40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

    409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

    685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

    686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

    779577344 262144

    779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

    977104896 131

    977105027 32 table dry GPT

    977105059 1 dry GPT header

  • Issue after you create the new partition, Bootcamp expansion

    Hello

    I hope someone can help with a problem I'm having.

    I found an old Apple discussion on how to resize a partition, bootcamp, by reducing the size of the OS X partition, then using a Windows based tool to then extend the Bootcamp partition. Big mistake! I'm done with the same problem as the creator of this thread with my Windows no longer bootable partition.

    I followed the steps described by lonely T, which worked perfectly! Thank you very much!

    Then, I went into Windows and use the Partition Mini tool to extend the Windows partition in the unallocated partition, which worked fine in Windows.

    However when I boot in OS X and open disk utility I see now 3 separate partitions. (1) mac HD. ((2) Untitled (the one I created) 3) Windows HD (Bootcamp). Then OS X is not recognizing that I extended the Windows HD partition in the Untitled one.

    Is there a way to solve this problem without ruining it now expanded Windows partition? Windows does not seem to see two separate partitions, only in OS X I downloaded GPT Fdisk

    Thanks in advance!

    Output below:

    diskutil list

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 121,3 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_CoreStorage Macintosh HD 121.0 GB disk0s2

    3: disk0s3 Apple_Boot Boot OS X 134,2 MB

    / dev/disk1 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 1.0 TB disk1

    1: EFI EFI 209.7 MB disk1s1

    2: Apple_CoreStorage Macintosh HD 637,5 GB disk1s2

    3: disk1s3 Apple_Boot Recovery 650,1 MB HD

    4: Apple_HFS 173,7 GB disk1s4

    5: Microsoft Windows HD 188.0 GB disk1s5 data base

    / dev/disk2 (internal, virtual):

    #: NAME SIZE TYPE IDENTIFIER

    0: Apple_HFS Macintosh HD + 750.0 GB disk2

    Logical volume on disk0s2, disk1s2

    D3F5913D-0A32-4BE8-BD44-A65885746DA0

    Fusion unencrypted drive

    / dev/disk3 (external, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 1.5 to disk3

    1: EFI EFI 209.7 MB disk3s1

    disk3s2 2: Apple_HFS My Book Studio has 1.5 TB

    / dev/disk4 (external, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 1.5 to disk4

    1: EFI EFI 209.7 MB disk4s1

    2: Apple_HFS My Book Studio B 1.5 TB disk4s2

    Cs diskutil list

    CoreStorage groups of logical volumes (1 found)

    |

    + Logical Volume - Group 23846179-0CBE-42F5-A375-0D969F4C789E

    =========================================================

    Name: Macintosh HD

    Status: online

    Dimensions: 758507479040 B (758.5 GB)

    Free space: 229376 B (229.4 KB)

    |

    +-< physical="" volume="">

    |   ----------------------------------------------------

    |   Index: 0

    |   Disc: disk0s2

    |   Status: online

    |   Dimensions: 120988852224 B (121.0 GB)

    |

    +-< physical="" volume="">

    |   ----------------------------------------------------

    |   Index: 1

    |   Disc: disk1s2

    |   Status: online

    |   Dimensions: 637518626816 B (637.5 GB)

    |

    + -> 41CF6816-F84F-4D76-A6FD-97288E448BF7 family of Logical Volume

    ----------------------------------------------------------

    Encryption type: no

    |

    +-> Logical Volume D3F5913D-0A32-4BE8-BD44-A65885746DA0

    ---------------------------------------------------

    Disc: disk2

    Status: online

    Size (Total): 749999882240 B (750.0 GB)

    Reversible: no

    Name: Macintosh HD

    Volume name: Macintosh HD

    Content indicator: Apple_HFS

    LVG Type: Fusion, sparse

    sudo TPG - vv - r see the/dev/disk0

    See the TPG: / dev/disk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

    See the TPG: / dev/disk0: PMBR to sector 0

    See the TPG: / dev/disk0: Pri GPT to sector 1

    See the TPG: / dev/disk0: GPT Sec at sector 236978175

    start index size summary

    0 1 PMBR

    1 1 Pri GPT header

    2 32 table GPT Pri

    34 6

    40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

    409640 236306352 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

    236715992 262144 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

    236978136 7

    236978143 32 table dry GPT

    236978175 1 dry GPT header

    sudo TPG - vv - r see the/dev/disk1

    See the TPG: / dev/disk1: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

    See the TPG: / dev/disk1: MBR suspicious to sector 0

    See the TPG: / dev/disk1: Pri GPT to sector 1

    See the TPG: error: wrong card

    See the TPG: could not open device ' / dev/disk1 ': Undefined error: 0

    sudo fdisk/dev/disk0

    Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

    Signature: 0xAA55

    From end

    #: cyl hd s - cyl hd s id [Start - size]

    ------------------------------------------------------------------------

    1: EA 1023 254 63 - 1023 254 63 [1-236978175]

    02:00 0 0 0-0 0 0 [0-0] unused

    03:00 0 0 0-0 0 0 [0-0] unused

    04:00 0 0 0-0 0 0 [0-0] unused

    sudo fdisk/dev/disk1

    Disk: geometry / dev/disk1: 121601/255/63 [1953525168 sectors]

    Signature: 0xAA55

    From end

    #: cyl hd s - cyl hd s id [Start - size]

    ------------------------------------------------------------------------

    1: EA 0 0 2 - 25 127 14 [1-409639]

    2: AF 25 127 15 - 1023 254 63 [409640-1245153568] HFS +.

    3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1245563208-1269760]

    * 04:07 1023 254 63-1023 254 63 [1246834688-706689024] HPFS/QNX / TO THE

    Did you install GPT Fdisk as described in Re: can not start windows after resizing partitions ? If so, can you post the output of 'p' command of Gdisk?

  • Unable to Load Page after having extended a controller of

    Hello

    I work in the extension of the controller. Now the problem I'm facing is all by making the extension of the controller.

    While the extension I've mistakenly entered the wrong path for the custom package that will be the extension of controller class.

    Now after having extended the CO main, when I'm trying to load the page it gives me an error of OA. My intenstion was to customize the page and load the extension of controller to replace by the PDC.

    Because I am not able to load the page, impossible to configure the extension of controller via the customization of the page. The page is not be responsible and not allow me to go further.

    Please help me solve this problem. How can I go back to my original state of the page with the PDC.

    Hello

    There is a functional administrator of responsibility. Click on that there is a customization of the tab at the top of the page.
    Click on that it will ask u for the path of the document. give your way here and apply.
    After doing this, you will find two options persionalisation and manage the customization.
    Click on manage customization, there are several options, you can disable or remove your customizations from there.

    After making your desired, click on apply.

    Thank you

  • How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

    How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

    Thank you.

    Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
    You can delete this folder to cancel the download.

    If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

    Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
    Linux: "/path_to/firefox/updated"
    Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    
  • Could not import the m2ts in first CC 2015 files after having upgraded to Windows 10.

    Hello! I have a problem after having upgraded to Windows 10. Please help me.

    I upgraded the operating system to Windows 10 by windows update.

    After that, I had some problems with language settings keyboard, so I have made a new account.

    Now in my PC, there is first CS6, CC, CC2014, CC2015.

    After upgrade, I can not import M2TS in CS6, CC2014, CC2015, and latest projects with M2TS files cannot load those, just to show the question icon.

    When I try to import M2TS newly or connect, they show a popup message with "the file has an unsupported compression type.".

    Import M2TS is possible in CC.

    I want to know how to fix it.

    Trash all your media cache. Rename the folder in the files, and then try again.

  • After having recently updated windows, some programs no longer work. In addition, System Restore does not work.

    After having recently updated windows, some programs no longer work.  Also, when I went to do a system restore, that he would not allow me to restore to an earlier date.  Among the programs that no longer work are VLC Media player, ieploxer, f.lux.  Even though I have uninstalled and reinstalled they would not load correctly.  I would get the splash screen for the program, but noting else.  When I am gone in Windows Task Manager the program would not appear in Applications, but there are processes running.  And an interesting thing, the exe afficheraient use of the 72K memory.  Still, even for different programs.

    What can I do?

    Start the command prompt, and then type

    sfc/scannow

    Do check and see what the result is.

    Also run full system scan with:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • How to extend the system partition of Windows server 2008 for free?

    my windows server 2008 r2 system works really slow, I'm extending the system partition. I tried windows built-in disk management, but after releasing the free space disk d: I cant just add for the c: drive, I can not move its position. It's disgusting! then I found a few 3rd party software, but none of them are free, they are more expensive I can afford is there some advice to help me to ~ ~ thank you very much!

    Hello

    The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

    Hope this information is useful.

  • Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

    Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

    If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

    Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

    In Windows 7, you can use a command-line high;
    http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  • After having updated for Windows 10, if I try Sava a file in TIFF format, it will not save and Photoshop freezes. Is this a known problem and is at - it a cure please?

    After having updated to Windows 10. If I try to save a file in TIFF format, it will not save and Photoshop CS6 freezes. This is a known fault and is at - it a cure please?

    • Please would the ' Save in the background ' option and check if this helps you in any way. "
    • To activate this option, choose Preferences > file management and save in the background check
    • If this does not help, try to reset the Photoshop preferences after the bottom of the article:

    Using Photoshop | Preferences

    PS: Restart Photoshop when you make changes in the preferences.

    ~ Sarika

  • How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

    How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

    You can not.  You must check 'install' to install and run it.

  • Cannot use the Windows Partition

    So, I have seen very similar messages and followed several forums, but I can't yet figure out what to do next.

    I have 8.1 Windows on my Mac.  I wanted to repartition the Windows partition and make bigger it because I was running low on space, and the Windows partition is what I use it mostly for graduate studies.  About a year ago, I took an easy youtube video and used Mini Wizard Partition re-partition space and it worked perfectly.  I have found the same video and tried to repartition the Windows partition again, but apparently I royally screwed up.

    My BootCamp is not yet visible more in disk utility.  Under the partitions, there is an option called "disk0s4" greyed, but I'm not allowed to do something with it.  I can't verify or repair.  If I go to Applications, BootCamp Assistant is there, but he wants me to start the installation of BootCamp.  It was not an option to restart Windows more, and when I turned on with alt + market, Windows was not an option more.

    I followed this tutorial:

    http://nerdr.com/bootcamp-partition-lost-repairing-Mac-partitions/

    and when I restarted my Mac, restart Windows was an option. So I thought that I fixed it! EVIL.  My screen was black and said: 'Missing Operating System '.

    I downloaded EaseUS Data Recovery Wizard for Mac (because it was another suggestion), and I was able to recover and see the files on the NTFS disk0s4, so I'm quite positive, they have not all been completely erased.  Or at least the part of basic Windows is still there.  I can't recover the drive to anything, because it tells me that I will just be fitness on the same drive, and I honestly don't know how to retrieve these files will help with the side of the partition of things.

    I also used TestDisk and it seemed to find my missing partition, but in the middle of analysing it, it says something like "disk too small."  After further research, I went through and took only the most recent score that seemed to be deleted with NTFS, and when you are trying to do, it would allow me to make a 'logic' partition because he said something in red, as 'bad file.'

    My Mac still works perfectly, but I'm terribly need to recover my windows.

    Here are my findings from a similar position:

    Last login: Wed Mar 9 16:30:28 on ttys001

    Anna-Owenss-MacBook-Pro: ~ acowens1$ sudo gdisk/dev/rdisk0; "exit";

    GPT fdisk (gdisk) version 1.0.1

    WARNING: Open with shared lock devices will not have their

    table partition automatically reloaded!

    Scanning partition table:

    MBR: hybrid

    BSD: absent

    APM: absent

    TPG: present

    Found a valid GPT with hybrid MBR; using GPT.

    Command (? for help): p

    Disk/dev/rdisk0: 625142448 sectors, GiB 298,1

    Logical sector size: 512 bytes

    Identifier (GUID) of disc: 0000429B-368F-0000-CB2D-000003440000

    Partition table contains up to 128 entries

    First usable sector is 34, last usable area is 625142414

    The partitions will be aligned with the boundaries of sector 8

    Space free total is 277435021 areas (132,3 GiB)

    Starting number (sector) end (sector), Code name of size

    409639 40 1 200.0 MiB EF00 EFI system partition

    2 409640 268314855 127.7 giB customer AF00

    3 268314856 269584391 619.9 MiB AB00 Recovery HD

    4 547018752 625141759 37.3 giB 0700 BOOTCAMP

    Command (? for help): r

    Recovery/processing command (? for help): o

    Size of the disk is 625142448 areas (298,1 GiB)

    MBR disk identifier: 0x0000711C

    MBR partitions:

    Code of State sector Boot start end sector number

    1 1 547018751 primary 0xEE

    2 * 547018752 625141759 0 x 07 elementary school

    Recovery/processing command (? for help): h

    CAVEAT! Hybrid MBRs are flaky and dangerous! If you decide to not use one,

    Simply press enter at the prompt below and your partition table MBR will be

    be intact.

    Type one to three GPT partition numbers, separated by spaces, to be

    added to the hybrid MBR, in order: 2 3 4

    Partition of EFI GPT (0xEE) place first in the MBR (good for GRUB)? (Y/N): y

    Create entry for the #2 GPT partition (partition MBR #2)

    Enter a hex code MBR (default AF): n

    Set the bootable flag? (Y/N): n

    Create entry for the #3 GPT partition (partition MBR #3)

    Enter a hex code MBR (default AB):

    Set the bootable flag? (Y/N): n

    Create entry for the #4 GPT partition (partition MBR #4)

    Enter a hex code MBR (default 07):

    Set the bootable flag? (Y/N): y

    Recovery/processing command (? for help): o

    Size of the disk is 625142448 areas (298,1 GiB)

    MBR disk identifier: 0x0000711C

    MBR partitions:

    Code of State sector Boot start end sector number

    1 1 409639 primary 0xEE

    2 409640 268314855 primary 0 x 01

    3 268314856 269584391 primary 0xAB

    4 * 547018752 625141759 0 x 07 elementary school

    Recovery/processing command (? for help):

    Now, my major dilemma is that in the original post, he said to the partition of the hybrids with the numbers of 3-4-5, but I was unable to do so.  When I tried 5, he said "partition does exist or is too large."  So I used the 2 3 4 numbers.  Now, I'm at the point where I use the w command (to write), but I don't want to do it if I didn't the other steps correctly.

    1 mini Partition tool is very dangerous and should never be used on a Mac, in particular, more than once.

    2. article NERDR is the most irresponsible article about these issues and causes and exacerbates still more data loss.

    3. Please do not rewrite the MBR/GPT with Gdisk.

    4. you must return to Testdisk. TestDisk is used only for scanning, not for the updates. All updates using Gdisk, not binding Testdisk, once the right partition headers have been found.

    5 Please after the release of

    diskutil list

    Cs diskutil list

    sudo TPG - vv - r see the/dev/disk0

    sudo fdisk/dev/disk0

  • Unable to connect to the network after having extended to a second Airport via ethernet router

    Hello

    I have a 5th gen airport extreme that did a wonderful job providing the wifi to the majority of our House. Unfortunately, in our room on the floor, we have a (good) connection causing a constant depreciation with netflix that my wife was not fond of.

    Today, I ran a line of 100 feet of ethernet in my attic and connected my previous dual band gen 3 airport extreme. I have reset the router and configured from scratch. When it has completed the Installation Wizard to "expand my current network." as soon as the router is online, our network goes off. I can unplug the second router and starts all over again. but when it is connected. my devices ask for network password and fail to connect.

    how our network is set up:

    Modem - Airport Extreme (5thgen) - ethernet 8port switch - Airport Extreme (3rdgen)

    All are wired using the cat6 cable.

    Any help would be greatly appreciated.

    Please perform a hard reset on the 3rd Gen AirPort Extreme as follows:

    Turn on the airport for a few minutes

    Pressed the reset button on the back of the AirPort Extreme for 5 to 6 seconds

    Release the reset button and allow a minute for the airport restart to a slow, flashing amber light status

    Temporarily, move the 3rd Gen airport close to the airport of Gen 5 th and connect short, spare Ethernet cable... no matter what length will make... among the <-->LAN ports on the 5 th Gen to the "O" WAN port on the 3rd Gen airport

    Turn on the 3rd Gen airport for a minute or two

    Rerun the installer... who will suggest that the 3rd generation will extend the signal of the 5th generation, enter a name for the 3rd generation device and click Next. Your screen will be similar to the example below, but will show your devices and the network name.

    Monitor the following very closely to ensure that the 3rd generation is currently set to spread with Ethernet.  This indicates that the installation wizard recovers the Ethernet connection, so the 3rd generation will be configured correctly.

    Wait another minute until the 3rd generation is configured and working properly... and check that it causes NO problems on the network as if it was before, when it was not properly configured.

    Now move back the 3rd generation to the remote location and connect the Ethernet cable to the WAN port on the 3rd generation.  If your cables Ethernet works correctly, the 3rd generation will work properly.

    If the 3rd generation does not work properly, then you will need troubleshoot the Ethernet connection and, eventually, the Ethernet switch... Since you know that the 3rd generation has been put in place properly and it works well with the other short Ethernet cable.

  • No video after having replaced the graphics card and power supply

    I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.

    Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.

    From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.

    In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.

    The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.

    After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.

    Does anyone know the purpose of the wires that were connected to the top of the Tower?

    They would cause they cause this problem if they are not correctly connected?
    Any suggestions for the possible causes of the absence of a signal from a video card?

    I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.

    Now I feel kind of stupid, but I know better next time...

Maybe you are looking for