Repair of brush spinning-loading for a long time

Similar Questions

• I bought a new iPhone 6 s more and told me to load for a long time I did let him charge for 25 hours. Is that going to affect my battery life and what happens if I use it immediately?

  I have a new iPhone, and told me to let it load for a long time. I let it charge for 25 hours. This can affect my life of bacteria? And what happens if I don't use the phone immediately?

  Not at all, you can leave it plugged into the power supply, and it won't hurt the battery. However I am not leaving the phone in a State discharged for a long time. That can hurt so when he approaches zero the load soon.

  This user tip can help: when to charge your iPhone or iPad

• VMware vsphere client is in the "inventory loading" for a long period, then received a message from "time out

  We have two type network connection in my lab, one is internal net, all computers on this network type internet access themselves, but they could access the internet through a proxy server. one is external net, all computers on this network type internet access themselves.

  If my connection to the computer's internal network, the client is responsible for the inventory for a long time when I use VMware sphere client to connect to the VMware Server and give a message "connection error". below two screenshots are for the description of the error. But if my connection to the computer is net externally, I can connect to vmware server successfully.

  

  Here is the description of my VMware Server infrastructure:

  My vmware server has two network adapters, vmnic1 and vmnic0. vmnic1 is used for the internal network, vmnic0 is used for external NET. I put a serval host in my vmware server, one of them is used for the proxy, all the computers in my lab can access internet through this proxy host via vmnic1.

  Proxy host, I add two configurations for iptables as below:

  iptables - table nat - append POSTROUTING - out-interface eth0-j MASQUERADE

  iptables - append forward - interface eth1-j ACCEPT

  Further, I have another server in vmware, I also can connect to vmware server successful if my connection to the computer's internal network. and this server network two are the same.

  How can I debug this problem? Thank you very much!

  Management is necessary for both networks separately?

  Because if not, you can move the Group of management to the internal network on vmnic1 ports...

  Create a vmkernel port and turn it on to management, assign an IP address and it should be possible to connect to the internal network.

• When I select recently bookmarked it works ok, but when I select unsorted bookmarks it opens a window not closing cycles for a long time.and I want to close the window manually and not automatically

  When I use the selection recently marked with a bookmark in bookmarks, it works very well and load the page quickly and opens another window. but when I go to unsorted bookmarks and double-click on the desired bookmark it loads very slowly and cycles for a long time. If I go to the firefox icon in the Launcher on natty 11.04 with unity it shows two open windows. I click on the unsorted Bookmarks window and manually stop and it works well and unordered finishes, loading the bookmark page I was trying to see. Why the unsorted Bookmarks window closes on its own? Is there a setting I can do close automatically. It really slows down the loading of the page, I tried to see. well thank you for any help or advice.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• EditingUtils.js has worked for a long time

  In a recent thread I inquire how to bind to a specific Spry Panel on another page. I got a very helpful answer with a link to a tutorial that describes the need to download the latest version of Spry and copy SpryURLUtils.js to site SpryAssests folder. The link works fine, but when I want to open these pages in DW and work on them, I have a LONG period of spinning Rainbow ball followed by this message:
  
  "A script in the file MyDisk:Applications:Adobe Dreamweaver CS3:Configuration:Shared:Spry:DesignTime:EditingUtils.js worked for a long time. Do you want to continue? »
  
  Click 'Yes' or 'No' to display the dialog at least once more until the page is accessible in the interface of DW. I don't know if I have a current version compatibility thing or what. Everyone knows this?
  
  JAY

  I found my own answer in this tech note of.

  Not hard to fix. Just that I have little hack.

• Please can someone help me for a long time out of the payment itun

  Please can someone help me for a long time out of the payment of itun, I lost my phone.

  This is my information

  ****

  ****

  Thank you

  < personal information under the direction of the host >

  OK so tell me first your reason! It of your personal account, why do you give?

• I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock?

  I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock? In my opinion, it works on IOS8. Because I have not used in a long time, it has reset and does not connect to the wifi until I unlock, and I forgot the password to unlock it. I tried to clear up my iPhone but it requires Internet and iPod can not connect to Internet ithe, I also tried to restore the 'home' button and the lock button while connected to iTunes on my computer and that did not work either... Please let me know if I haven't tried something or have missed something.

  Thank you

  You have to follow the instructions for the erasure or use recovery mode in iTunes again. . You do not specify what happened when you tried to follow these instructions, or instructions for iTunes, which you tried to follow, but you will be able to exit the mode disabled via iTunes if you do not have Wifi:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  See you soon,.

  GB

• Hi all, I need a little help to try to solve a problem of updating Bios for a long time.

  I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...

  Error code: 3033

  "GoTo" label not found

  on line 89 of w:\patches\i...ate\windows\installer.wbt

  My system is...

  Compaq Presario SR1339uk

  Serial number: CZB5050HBW

  System number: PS267AA

  Motherboard: Asus PTGD1 - LA

  BIOS version: 3.13 12/14/04

  Operating system: Windows XP Home Edition

  Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.

  Assume that you download SP26760.exe (BIOS 3.28)

  Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).

  Open a DOS (command prompt).    You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.

  Once in the BACK, type:

  CD FOLDER

  go the the directory of temporary files.

  Then make a

  DIR /S 328.LE ROM

  to find the directory where the update files are located.    Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)

  CD pft467D.tmp

  Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches.  By omitting the switches can cause other problems, as have reported activation of Windows problems.

  AFUWIN /i328. ROM /pbc

  For reference, on my system, here's what I saw in these folders:

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir

  Volume in drive C is DRIVE_C
  Volume serial number is FE8F-4AA6

  Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp

  26/04/2011 11:11 < DIR >.
  26/04/2011 11:11 < DIR >...
  24/01/2006 15:31 524 288 328.le rom
  01/07/2004 10:54 53 248 AFUWIN.exe
  01/07/2004 10:54 amifldrv.sys 6 912
  21/02/2006 18:08 526 374 Installer.exe
  09/05/2006 17:10 sp26760.rtf 1 784
  11/04/2005 10:55 398 696 WBDEG44I. DLL
  6 file (s) on 1 511 302 bytes
  2 dir 110,361,944,064 bytes free

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc

  It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do.   If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.

  For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.

  Good luck.!

  -DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).

• I found iphone locked by owner for a long time in Europe and I need to contact the owner, but I was able to reach him?

  I found iPhone locked by owner for a long time in Europe and I need to contact the owner, but I was able to reach him?

  Return it to the police.

• I used numbers for a long time, but only make spreadsheets base.  With the latest updates, I couldn't change my information.  What Miss me?

  I used numbers for a long time, but only make spreadsheets base.  For about a year and with the latest updates, I couldn't change my information.  What Miss me?

  Hi Deb,

  There not really enough information in your message to help you. How things don't work, exactly? Is there any alerts or messages?

  Quinn

• I can't connect to MSN and Hotmail for a long time, about 2 weeks and I try to change my password but the support of coustomor give me a PIN code

  Hello world

  Hi everyone, please I need help I can not connect on MSN and Hotmail for a long time, about 2 weeks and I try to change my password but the support of coustomor give me a PIN code but I forgot it and when I try to answer to the security question, they said try later I am looking for your help I have a lot of private information and I want to get that back please help me :(
  How will I know if my account has been blocked? and how can I get it back?
  Hi -0,
  
  The question you have posted is better suited for Windows Live Forums, check out the link:

  http://windowslivehelp.com/product.aspx?ProductID=1

   

  Reference: How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

   

  I hope this helps.

• Update KB961118 continually appears in my system tray, but does not install after that many try. How can I remove it. This has happened for a long time. Help

  Update KB961118 continoulsy appears in my system tray, but the update does not install. How to remove OR install. This has happened for a long time. Help

  KB961118 is an option, not the security update. Feel free to hide it & move on with your life. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 6700 HP eprint 'in progress' for a long time

  I couldn't eprint to work with my Chrombox. It works fine from iPhone or iPad. Initially, he showed ' error ' State. " After you removed and reinstalled the HP 6700 x, the situation has become 'in progress' for a long time. Any suggestion on how to solve this problem?

  Thanks for your reply, but I already solved the problem by myself. I had to reset the configuration of the printer of the Chrombox and restart chrome box to activate the new configuration. It worked for me.

• Still for a long time, I can't install the update of security KB2416447 on my Windows XP.

  Still for a long time, I can't install the update of security KB2416447. But because Microsoft NET Framework 1.1 SP1 is missing on my PC, so I try to install Windows XPSP1a express but then I see the error message on the language is different. So I still have a security on my PC. How can he solved?

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  ===============================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Vista has stopped turning the games run for a long time.

  Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.

  Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.

  Try running the memory and the hard drive scan to make sure that both are good.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  If both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.