Repair service cannot restore my lost DRMs?

Hello

My brother has unlocked my Z3 without telling me first. Now that my warranty is lost, I wonder if I could register with the repair service restore fee DRMS?

This here will not restore them depending on when your phone was 1st purchased, but maybe something to look into if you are interested in

Tags: Sony Phones

Similar Questions

  • Cannot install SP1 - repair service cannot start your computer

    original title: try to install Norton 2012

    I can't install Norton 2012. It says I need service pack 1, when configuring her repair service cannot start your computer and then installs nothing

    Microsoft Windows Vista® (32-bit and 64-bit) Starter/Edition family Basique/Familiale Premium/Professional/Ultimate Edition with Service Pack 1 or later is the minimum requirement to install Norton 2012.

    Learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  • Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

    Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

    Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

  • Cannot restore iphone6 sauvegardΘ - out of memory

    Hi all

    I lost a few messages on my iPhone somehow and I try to restore from dos, I done a week before and quantified for the first time.

    When I click on the restoration of the back to the top and enter all passwords I get "restore in progress" on the phone, but after a minute or two, it then comes up:

    Cannot restore backup to Gemiphone not enough space on the phone.

    That is rubbish because there is a lot of space on my phone.

    Someone at - he had this? know any way to move, unfortunately is not another upward which is recent

    All advice appreciated, or decent applications that retrieve texts might be good too.

    Thank you

    GEM

    Suggest following the steps detailed here:

    If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

  • Cannot restore from a backup

    I cannot restore from a backup and don't know why.

    I have a Crucial SSD of BX100 in my mid 2010 MacBook Pro. It is divided into two partitions. I got Snow Leopard on a partition and Yosemite on the other. For some reason any I've never understood the Snow Leopard guarded beachballing partition. This happened if often that I decided to wipe the disk and reinstall from my backup, do it before the beachballing began to occur.

    But I can't restore. I wiped the drive of a Snow Leopard system, repaired and reformatted. The drive is not Core Storage, this is Mac OS extended (journaled). When I try to restore the restore on it works for about two minutes and then stops. Finally, I get a message saying that the disc has been ejected incorrectly.

    I noticed that when I receive information on the drive, an element appears different from other readers and which corresponds to the element, owners enabled: no each other drive I've seen says owners enabled: Yes. Is it all just because there is no system on the partition?

    Also "ignore ownership on this Volume" must be checked or unchecked?

    Suggestions welcomed, I am baffled by this.

    Snow Leopard erase and install

    1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
    2. Immediately after hearing the chime hold down the C key.
    3. Release the button when the Apple logo appears and wait for loading to complete.
    4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
    5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
    6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
    7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
    8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.
  • Directory services cannot start SBS2003 lsass.exe error?

    Hi all

    I have a SBS 2003 server who gave a customer who seems not to start windows.
    It gives 0xc000007a error code (Directory Services cannot start because the specified procedure could not be found).
    After finally the local Windows password reset, I am now faced with another problem, how to solve the problem I have for the first time to the difficulty.

    I've done some commands listed on the Microsoft article http://support.microsoft.com/kb/258062, nothing helped.

    I've already run the disk check, but it is impossible to run a repair on the installation because it shows the same error

    Does anyone know how to get the server to start successfully, without the need to reinstall Windows?

    System Spec: -.
    2 x Intel Xeon processors
    4 GB of DDR2 memory
    company 3x250GB WD HDD (Raid 5 with parity)
    Quantum Ultrium 2 tape drive

    Hello

    Thanks for your quick response to my post. I recently decided to reinstall the OS due to time constraints,

    Thank you

  • I ran a restore and lost all my files. I can get back them some how

    Original title: files lost

    I ran a restore and lost all my files (more importantly photos).  I can get back them some how

    Hello

    Log in as ADMIN

    Your photos and other files should still be there under C:\Users\Your user Name\

    Sounds like your account became corrupted or affected by malware?

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the prompt here if
    necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    How to create a Vista - free methods recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    -------------------------------------------------------------------------------------------------------------------------------------

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Cannot restore backup

    original title: save my info on 4 cd before sending computer laptop out for repair, now cannot charge information. Can you help me?

    HP suggested that I backuo my files to cd before you send my laptop back for repair.    Now am unable to reload the files in the laptop. Can help you, please.

    Hello Marilyn,.

    Here is an article on the advanced use of restoration (during normal restore does not work): http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

    Here are two additional articles for restoration that may be useful:

    Restore files from a backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

    Back up and restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    I hope this helps.

    Good luck!

  • Error: c:/windows\system32\whatyouclickedon.msc the service cannot accept control message

    Help so confused trying to attach 1 get prob. an another system32 group policy error as no system restore and the control panel will not work correctly and sometimes logon I have no user profile

    someone please help im so confused, I got something weird, I guess that this auto downloaded on my computer do not know it showed up in my toolbar at the time and it looked like the symbol of windows firewall but wasn't it was a supposed antivirus program who wanted to buy me out well I got the blue screen a second after I saw it and my anti virus program did not I spent hours and now am Finally able to connect under normal start up instead of safe mode I think pretty well I found it, I saw an add on IE at the exact moment it happened and it turned off and was able to start fine have not seen since scanned for all after normal startup and he found nothing, but I find myself with these weird problems since this thing very happened from time to time as each start 2 ups or so on normal startup, I don't have any trash a few icons, fonts is very basic and small and it appears a message sayingsomething is wrong with the user profile and I restarted and everything comes back, but I try to get into the control panel and I can load it fine but when I try to enter the administration tools , it appears c:/windows\system32\whatyouclickedon.msc the service cannot accept control currently message I went to a Forum on here and read a similar and tried solution of type cmd at the command prompt in the search bar and he was able to load regularly but when tried run as administrator happens with the same message when I go into Control Panel as I prev said so I can't do the sfc/scannow and finally I tried to solve by doing a system restore but now it says the same message in the Control Panel, but before he kept coming because it has been disabled by group policy and when trying to get to the group policy I couldn't I'm so confused my head is spinning but I'm not completely stupid comp. don't know where to start or if all these things are a coincidence or really are related may not think about what I'm missing please help!

    You have not completely removed malware.

    Scan with this program:

    If necessary, do all the workSafe Mode with network.

     

    To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

     

     

    Read all the information below before you start:

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    How to use Malwarebytes after installation:

    1. open Malwarebytes > click the update tab at the top > get the latest updates.

    2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

    3 MBAM will now start to scan your computer for malware. This process can take some time.

    4. when the scan is complete, a message box will appear

    5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

    6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

    7. a screen showing all of the malware displayed the program that is

    8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

    9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

    10. you can now exit the MBAM program.

    See you soon.

    Mick Murphy - Microsoft partner

  • The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422) attempt to run the Windows backup utility.

    I get this message every time I try to run the Windows backup utility.  All the services are rundning according to the instructions of Microsoft experts on the same issue.

    Original title: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422)

    Hi Charles,

    Welcome to the community Microsoft and thanks for posting the question. I'll certainly try and help you perform the backup.

    Until we start could you give us some more information?

    1. Since when are you facing the issue?

    2. you have any anti-virus installed on the computer program?

    3. What are the troubleshooting steps correct you have taken to correct the problem?

    4. are you aware of any changes made to the computer before the show?

    I suggest you to re check the service as long as this error usually occurs if one of the services required for the backup Windows for work is disabled or has not started.

    To check the services, click Start, in the Start Search bar type services , and then press enter.

    Please check that the following services are enabled:

    -"Remote Procedure Call" (RPCSS) must be active, Automatic.

    'COM + Event System"(System events) must beactivated en, Manuel.

    -'System Event Notification Service"(SENSE) must be active, Automatic.

    -"Volume Shadow Copy" (VSS) must beactivated en, Manuel.

    'Microsoft Software Shadow Copy provider' (SWPRV) must beactivated en, Manuel.

    Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

    I also suggest you to run a SFC scan (System File Checker). This will replace the corrupted Windows files.

    Here are a few articles on Windows backup.

    http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

    http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

    Hope this information was helpful and let us know if you need assistance in the future. We will be happy to help you.

  • The SSTP service cannot be started

    I am trying to share a connection, but cannot start service ICS - error 1068 - the dependency service or group was able to start. I followed the dependencies and the failing service was Manager of remote access connections. He is unable to start because the SSTP service cannot be started. When I try to manually start the SSTP Protocol it gives me a message "Socket Tunneling Protocol Secure Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"I changed the startup type to automatic, but nothing helped. My Windows is build 7600 with all updates applied. My computer configuration is C2Q 6600, Asus P5QL Pro, nV 9600GT, 2x2gb Apacer.

    EDIT: I followed this guide by removing dependence on SSTP but now it gives me error 87 - incorrect setting instead of 1068.

    So finally I solved my problem! I removed the RasMan (Remote Access Connection Manager) of the ICS service dependency and therefore probably broke support VPN and Dial-up . Here is the solution for those who have the same problem. Everything you do is your own responsibility!

    Press Windows key + R to open the Run dialog box. Type Regedit . Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ then right-click SharedAccess, and choose export . Save the file, so you have a backup if you want to restore the settings the easy way. Now open SharedAccess, double-click DependOnService , and remove the entry RasMan . Restart the computer and now ICS works perfectly. Make this "tweak" will probably break the VPN and Dial-up support!

  • 80070422 ERROR_SERVICE_DISABLED. The service cannot be started, either because it is disabled or because__it has no active device is associated to him.

    Just bought a HP Pro Book 6440 with Windows 7 installed.

    Problem with windows Defender.  Cannot be enabled after a pop up.

    Code: The service cannot be started, either because it is disabled
    There is no active device is associated to him.

    Windows security systems cannot be turned on.

    Also get Automated request

    Message on google: your query looks like automated queries of a spyware application.
     
    blocked warning Spyware navigation

    We recommend that you scan your computer against viruses and spyware immediately and remove any suspicious software found.

    I use Kapersky 2011.  No problem scanning every day.  Programs spyware downdload no change.

    Now after a week impossible to surf the internet or google whatever it is or view facebook pages.

    Tried many things.  Help, please.

    Hello

    Perform the following steps and install automatic updates and then try to turn on the firewall.

    Run an online scan to check any virus or any other malicious software:

    http://OneCare.live.com/site/en-us/default.htm

    Run as Administrator Security Center:

    http://Windows.Microsoft.com/en-us/Windows7/understanding-security-and-safe-computing

    Perform the following steps and update the computer:

    (a) click Start, type Notepad in the start search box, and then click Notepad in the list programs.

    (b) copy the following text, and then paste the text into Notepad:

    start wuauserv sc config = auto

    SC config bits start = auto

    SC config start = auto DcomLaunch

    net stop wuauserv

    net start wuauserv

    net stop bits

    net start bits

    net start DcomLaunch

    (c) click file, click Save as, and then type Repair.bat.

    (d) in the file type box, click all files (*. *).

    (e) in the area save in, click Desktop, and then click Save.

    (f) on the file menu, click on exit.

    (g) the right - click on the Repair.bat file that you saved in step 5, and then click Run as administrator. This action starts the required services. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    (h) try again to install updates. If you install the updates, delete the file Repair.bat. To remove the file Repair.bat, right-click Repair.bat, click on remove, then click Yes.

    Try to start Windows Defender after these steps.

    Thank you, and in what concerns:
    Naman R - Microsoft technical support engineer.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot restore backup iOS 10 iCloud

    Hi, I have updated my iPhone to iOS 10 6 yesterday making a new installation (with IPSW restore via iTunes) then I could restore from my last backup (I backup with iTunes).

    After the update, while completing the initial installation of the phone, I choose "Restore from backup iCloud" then I select the backup that I want to restore, but once the backup is complete download I get a message "cannot restore backup. I tried several times and also with the previous backups of the same phone as well as with the same result.

    Is this a bug with iCloud? Is there another way I can restore my apps on my iPhone for this backup?

    You update iTunes before installing iOS 10?  iTunes required an update before installing the new iOS.

    See also well- update to iOS 10 - official Apple Support

  • iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

    iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

    After the update to ios10, my 5s iPhone seems to work very well. I reconnected it to iTunes and then it bricked, and I panicked.

    iTunes synced a couple of times, it took about an hour and a half for me. After that it stopped its cycle of synchronization, I unplugged my iPhone - it still bricked. I then did a hard reset and it worked.

    Maybe I got lucky, maybe my iPhone and iTunes need a kick in their buttocks.

  • I have an iPhone 4 s 32GB. I restore to IOS loading 9.3 is then asked cannot restore iPhone. He was not a known bug (29). Can you help me?

    I have an iPhone 4 s 32GB. I restore to IOS loading 9.3 is then asked cannot restore iPhone. He was not a known bug (29). Can you help me

    Please, I beg you! Thank you in advance!

Maybe you are looking for