Repeat a call when the line is busy?

Similar Questions

• View missed calls when the phone is off?

  Hello

  My phone turned off (or without service) incoming calls do not show on my list of missed calls.

  There may be a voicemail when my phone is back, but no match no missed calls.

  Is there a setting that will show you missed calls when the phone is off?

  Debra

  iPhone 6 s

  Once you turn back on your iPhone, all calls that occurred while the iPhone was off should appear in the Missed Call list.

  If they do not:

  • If you are in your area served by your cellular operator, contact your operator.
  • If you are outside this area (roaming), you can not see the calls until the return.  You could ask your cellular operator on this subject.

• which method is called when the screen has lost focus but stays on blackberry?

  Hello

  I want to know in which method is called when the screen has lost focus, but always visible BlackBerry?

  For example, a screen is in the foreground and we disply dialog box so that the screen is visible but not to focus, therefore, at this time that methos called when we close this dialog box?

  Please, help me please please

  Override the following methods in your class to screen according to your needs

  1. when the screen button to the stack

  Call

  onDisplay() or

  onUiEngineAttached(boolean attached) - so attached is true then your screen is at the top of the screen

  2. When you are in a backlight and the lcd screen turns off to your state of rest and turns on again when you actively use this form

  call

  onVisibilityChange(boolean visible) - if visible is set to true, then you get the focus when the lcd display turns

  3. when your application moves to the background by clicking the red end button (i.e. without quiting the app, yet yours is active in the background)

  call

  onExposed() - when your application comes to the foreground of the background or during any type of screen that is in the top get popped

  & call

  onObscured() - when your application moves to the background, or when a screen pushed above your current screen more

• Default method of workflow activity is not called when the Page refreshes

  Basically, try to call a script function java front page of fragments of the charges.

  INSTALLATION PROGRAM:

  Jdev 12 c

  TF defined with a default activity that invokes a page fragment.

  The activity of default method calls a method to support bean which inturn calls the method init java script before the fragment on the page doesn't load.

  This TF is in a container jsf page.

  During the loading of the page containing the first activity of the method is called and js function triggers and then fragments of charges which is the desired behavior.

  PROBLEM:

  When I refresh the page by pressing F5 or by running the page again on the same window of the browser activity method default IS NOT gets called which inturn will not trigger the js call.

  But when I run the same page again in a different window it works and then subsequent updates or page load activity IS NOT of default method is called.

  If it is not provided? The default activity is called when the workflow is updated.

  Check outhttp://www.oracle.com/technetwork/developer-tools/adf/learnmore/108-triggerpopupinregion-1994836.pdf which should work also in your car.

  Timo

• Not able to get all the lines of business by program object

  Hello

  I use code below to get all the lines of a business object, but this code is back only 1 row is the first row of the business object.

  Please help me in this to be able to get all the lines.

  public String updateEmployee (String oldName, String newName) {}
  Rank [] is getInsertViewObj1 () .getAllRowsInRange ();.
  
  int j = row.length;

  for (int i = 0; i < j; i ++) {}
  
  String name = (String) row [i] .getAttribute ("Employeename");
  
  {if (OldName.equalsIgnoreCase (Name))}
  
  row [i] .setAttribute ("EmployeeName", NewName);
  getInsertViewObj1 () .getApplicationModule () .getTransaction () .commit ();
  break;
  }

  Hello

  Before calling getAllRowsInRange(), use vo.setRangeSize(-1).

  Thank you

• Unable to receive calls from Apple Watch, using WIFI AT &amp; T calls, when the iPhone is turned on, turned off or in Airplane Mode.

  I work on this issue and wanted to involve the community.

  I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

  I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

  Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

  I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

  http://help.Apple.com/watch/#/apd0443fb403

  If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

  • Send and receive digital messages Touch
  • Send and receive messages using Messages
  • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
  • Check current weather conditions
  • Track your inventory

  http://help.Apple.com/watch/#/apd2fe746e86

  Make calls via Wi - Fi

  If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

  To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

  Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

  Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

  Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

  Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

  AspiringAppleGuru wrote:

  I have... to connect to the 5 GHz on my... router bandwidth.

  Hello

  These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

  If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  Use Apple Watch without her sister iPhone - Apple Support

• Siri doesn't let me make a call when the phone is locked

  Siri doesn't let me make a phone call when my phone is locked. This is not the case with other phones in my family, but I can't find a setting to change. Any ideas?

  iPhone 6 with the latest iOS.

  Found the answer. It's under "Contact ID and password". Select "voice dialing".

• No way to ignore the call when the phone is "locked."

  I noticed this AM when I call came because I have the ability to "slide to answer." I wanted to send the appeal

  for VM as I can when the phone is not locked.

  -Nancy

  You can do it.  Simply press the power button a times to cut the ring/vibrate and twice more to ignore the call.

• XNET Config read to fill in when a certain arbid is received (i.e. return of function call when the msg is received)

  The API XNET-CAN allows to hardware configuration such that a call to read the framework/signal does not return until the message is received (no need to query the buffer, call to the function is as an event... function returns when a message is received) or if a time-out occurs).  I don't really want to query for data, unless I absolutely have to.  My plan is to have parallel code to wait for a specific message to receive and respond (should be very fast!) whil a different loop receives all other executives.

  A time-out of the reading function call would work pretty good, but it doesn't seem to work (see extracts attached).  The value of timeout only seems to work (no error property) is a value of 0 seconds.

  Thank you

  Todd

  Change of a single point of session for a queued session.

• Remote PC stops responding when the lines are added to a multiline textbox

  Hello

  When connected two RDP connections and multiline textbox is visible and always up-to-date (e.g. time real record on the screen), then all other processes and threads are suspended on the remote PC. For example, the task manage does not refresh, the clock stops, if you have a few applications running on this PC Server/services so their customers will get the writing/connect timeout errors, etc.

  to reproduce this problem:

  1. create a test application simulating recording in real time on the screen. For example, create a new GUI application (for example, in visual basic, delphi, etc.), several (for example six) textbox, control and set multiline = true (or use TMemo components in delphi), add the button and code to add rows in a loop (for example 200 iterations) these textbox/TMemo controls (see the sample code below). Build the executable

  2. have three PC of loan. The first connect to second via RDP and from there linking to third parties via a second RDP connection. Third PC start test application, that you created in step 1. While the lines are added to the multiline/TMemo text box, try to do something with this PC, for example open the Task Manager, check how it is refreshing, open clock and note how seconds are proliferating, try to connect to some services from another PC (shared disk for example, ftp, web, etc.) and see how to answer they are

  Windows 2000 seems to be ok, xp, 7, Server 2003/2008 have some problems

  is there something that we could do to make the third-party application with real-time logging to the multiline/TMemo text box does not slow down or suspend our services that are running on the same PC, when someone connect via RDP? also, it would be great if microsoft could fix this problem

  example code:

  For i As Integer = 1 to 200
  Dim s As String = «»
  J As Integer = 1 to 10
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox1.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 10
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox2.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 10
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox3.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 20
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox4.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 20
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox5.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 20
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox6.AppendText (s & Chr (13) & 10)
  Next I

  var
  i: Integer;
  s:string;
  Start
  for i: = 1 to 200 start
  s:='';
  While length<20 do="" s:="s+intToStr(i)+'">
  glMemo1.Lines.Add (s);

  While length<40 do="" s:="s+intToStr(i)+'">
  glMemo2.Lines.Add (s);

  While length<60 do="" s:="s+intToStr(i)+'">
  glMemo3.Lines.Add (s);

  While length<80 do="" s:="s+intToStr(i)+'">
  glMemo4.Lines.Add (s);

  While length<100 do="" s:="s+intToStr(i)+'">
  glMemo5.Lines.Add (s);

  While length<200 do="" s:="s+intToStr(i)+'">
  glMemo6.Lines.Add (s);
  end;

  Thank you
  Paulius

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  you might do better at the forum above. Good luck. :)

• Ignoring a call when the phone is in standby

  When the phone is in standby and locked (black screen) and a call comes, is it possible to send it directly to your voicemail? All I do is just wait until voicmail picks it up.

  Most of the calls come to me when the phone is locked and that the only choice I have is either to respond or simply wait until that voicemail picks up.

  Is there another way?

  Joe Parsons

  I just hit the power button two times and the call goes directly to the virtual machine.

• Need for a method to be called when the pop-up screen

  Hello

  I have a requirement in my application. I have a screen from which I'm moving to screen B. When I Pop the screen B, I need a method that must be called in the screen has. Looks same as onActivityResult() in Android.

  I am currently using onExpose(). But this method is called for all in the screen has. In the menu click or button also. Is there another way to do this?

  Help, please...

  You have two options I can think immediately, which do not have to change anything in screen B.

  (1) use pushModal when you call B screen.  The statement immediately after the pushModal will be executed as soon as B screen is popped.  In general, I try to avoid the modal screens, but in this case, it's probably what I would do.

  (2) set an indicator immediately before you tap screen B.  Test the flag in onExposed().  If the flag is not set, then the onExposed was called for another reason and you can ignore it.  If the flag is set, then turn him off and process you want, knowing that the screen that has been exposed as screen B jumped.

  Either should work for you.

• Strange artifacts on the PDF output (when the line is near a box)

  Hi all

  I hope someone can suggest a solution for this problem of purplexing.

  I have a rectangle (actually occurs similar rectangle image or text boxes) which connects to a line (Japanese points). Whenever the line is close to the rectangle, there is a slight but noticeable white line that surround the rectangle.

  When I start the editing mode in Adobe Acrobat format, he reveals that the PDF version of exit/distilled introduced this artifact by separating the part of the image in a "piece." The artifact (white line) is the border around this piece of image!

  Also, it is important to add that, if I move the line away from the rectangle, the low white line disappears.

  Please see the attachment.

  Any ideas on how to solve this problem?

  

  Export with transparency Dynamics (PDF/X-4) or if you have to distill make sure printing > advanced > flattening of transparencies is set to high resolution.

• Why can I not see my paths when the line is white?

  (NB. This could be a bug of Win8 beta)

  In Adobe Illustrator, I have several paths. When I put their race in almost any color I can see them. For example here, they are black:

  

  (Note that I have my plans of work hidden using the 'View' button-> menu 'Hide work plans', and I document established simulating (green) colored paper.)

  But if I change the white line, I do not see the paths:

  

  They are still there, you can see the anchor point etc. when the paths are selected:

  

  But they are not visible. What is going on? Is this a bug (I use a beta version of the operating system) or am I missing some setting that I do with the visible white lines? They are really white, export in PNG seems fine, why can't I see them in Illustrator?

  I'll tell you that it's a bug then.

  Using color paper simulate the document updated in place, a way of drawing, by setting white outline, making sure that overprint Stroke is NOT checked in the attribute Panel... should show the race. If not, it must be a bug somewhere.

  Maybe in Illustrator...

  Try this... Choose View > show transparency grid. I bet that the trait to appear as if by magic.

• function to call when the specific input text fields are selected

  Hello

  I have a number of text on stage entry field. I want to call some function when the specific input text fields are selected. Help, please

  Thank you

  certainTextField.addEventListener (FocusEvent.FOCUS_IN, handleFocus);

  function handleFocus(e:FocusEvent) {}

  trace (e.Target.Name);

  }