Repeat the mistake of Photoscreensaver.scr: "there is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

Similar Questions

• Outlook.exe is no disc in the drive. Insert a disk in the drive\device\harddisk4\dr4

  Outlook 2003

  Hello

  Please check with the experts of the Office and Outlook here: (re - ask your questions here)

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• «There is no disk in the drive.please insert a disc in the drive \Device\Harddisk1\DR4.»

  Hi all!

  When I try to install AVG on my WINDOWS XP SP2, a message is displayed with Titile "scvhost.exe - no disk" and the body of the message said that "there is no disk in the drive. Insert a disc into drive \Device\Harddisk1\DR4.

  attachment: -.

  http://i51.Tinypic.com/6zoaoo.gif

  or

  

  Please help me as soon as possible!

  Thank you very much!

  Post in the forums of users AVG.

• Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K

  Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K. I won't record anything. It keeps popping up when I want to stop and he let me close. And it won't go away. I tried the Task Manager, and who is unable to complete the task. I went to his file and tried to delete, but it's not going to get out me of my PC

  Hello

  1. what version of operating system you are using?
  2. did you of recent changes on your system prior to this problem?
  3. when, exactly, you get this error message?

  You can try the steps mentioned below and check if it helps to solve the problem.

  Method 1: Scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 2: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 3: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• How to remove the error message there is no disc the disc in the Drive\Device\Harddisk1\DR1

  There is an error message which keeps popping up and I push to cancel several times before it will go away however he comes back to the top on my screen at random times. Meesage hpqtra08.exe - no disc, then below it reads "he not there no disc insert disc in the Drive\Device\Harddisk1\DR1.
  Please help me to remove it from my computer!

  Hello lala80,

  Thank you for using Microsoft Vista answers Forum!

  hpqtra08.exe is normally installed as part of the HP all-in-one printer, scanner, driver copy and install the software. It is a non-essential process, and it is at the discretion of the user, whether to disable. If disabled buttons as scan in the 'all-in-one' continues to work. However if you never use it it is safe to disable. It does not work, just the button scan in the multi functional.

  You can disable this feature by using msconfig in Windows.

  Click Start and type msconfig in the search box and press enter

  Click the Start (top row)

  In the list of programs, uncheck hpqtra08.exe

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• There is no disk in the drive. Insert a disc in the drive device harddisk5 dr5

  I started getting this error message "there is no disk in the drive. "Insert a disk into the drive device harddisk5 dr5.  I have to click on about 20 times and it goes away eventually.  I use Windows 7 and have been unable to find an answer to how to make this message go anywhere.  Any suggestion would be appreciated.  Thank you!

  Hello

  ·         Were there recent changes made on the computer before the show?

   

  This problem occurs when all the following conditions are true:

  (a) you have a removable drive, such as an Iomega Zip drive, configured as the drive letter C.

  (b) you don't have a removable disk in the removable disk drive.

   

  Method 1:

   

  Change the assignment of drive letter for the removable a drive letter other than C:\.

   

  a. log in the computer as an administrator.

  b. Insert a disk in the removable drive.

  c. type computer management in the start search box and press ENTER.

  d. click on disk management.

  e. right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.

  f. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.

   

   

  Method 2:

   

  I also suggest you to start the computer in a clean boot and check which program non-Microsoft is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

   

  Method 3:

  You can go to Device Manager and see if you have any yellow bang! for the mouse or devices.

  (a) click Start and then click Control Panel.

  (b) click on system and Maintenance link.

  (c) in the system and Maintenance window , click the Device Manager link at the bottom of the window.

  In Device Manager, go then, mouse or other pointing devices.

  Do you see a yellow fringe! This would mean that you have an error with this device. Try to remove and reinstall.

  I hope this helps.

• Get "there is no disk in the drive has it please don't insert a diskette into the drive device drive hard/dr3/dr4 etc etc" error after installing the Bitdefender program.

  There is no disc in the drive please insert a disk into the drive device drive hard/dr3/dr4 etc etc.

  Original title: coordinator.exe no disc

  I got this message after installing BitDefender antivirus.
  It turned out to be partly because of WinPatrol - who had not been uninstalled.
  And the program uninstal delete his entry autostart nor its program file.
  Which has supported, manually, the end of the message...
  But I guess that's not specific to WinPatrol, which is an excellent monitor if it is not in conflict with the antivirus.  (It worked well alongside Avast.)

• Insert a disc in the drive \Device\Harddisk3\DR3?

  have a vi with sub about 20 screws in his .llb that makes a fair bit of the interaction of the data base and data acquisition.

  When it comes to 'entries preparation' sub vi in State "expt prep", if she is not simply close labview entirely, it gives 10 'Please insert a disc into the drive \Device\Harddisk3\DR3' errors in a row, then ends.  in fact some of the 10 are asking Harddisk4\DR4, but I still don't know what he's talking about.

  very mysterious, that is if I delete as void / vi and replace it with artificial constants, it does the same thing.  I use breakpoints, step over and highlight the execution and cannot see what is causing the error, it's like there is a short circuit in the wiring itself (!).

  was blocked for a day now.  thoughts?  tried to cut and paste the entire block diagram in a soft vi, labview opening/closing, restart, reinstall LV (2011 sp1) and daqmx 9.5.1 no effect.

  code attached

  new data - copy & paste the contents of the sub-vis & vi new screw do not affect not error, gutting all error DAQ hardware program priest DOES.  Board of Directors is a NI PCIe 6363.

• The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  I did no changes on my computer for functionality, commissioning due to above mentioned problem goes & long

  Hi KarlMaskery,

  1. When you receive the error message?

  2. you have any external hard drive connected to the computer?

  3. do you have security software installed on the computer?

  4 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Svchost.exe - No. disc there is no disk in the drive. Please insert a disk in to drive\Device\Harddisk1\DR5

  When I'm inserting an internet data card into my USB its error message indicating that svchost.exe - disc no. there is no disc in the drive. Please insert a disk into drive\Device\Harddisk1\DR5 Cancel, continue tryagain all option does not work its new popuping outside. :(pouvait point de restauration système peut aider?) or is it a problem with the virus please help.

  Hello

  1 did you change on your computer?

  2 what other USB devices are detected on the computer?

  Try connecting to another USB port and verify.

  Connect the card to internet data to another computer and check if works

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx WARNING: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

• There is no disk in the drive. Insert a disk in the drive\Device\Harddisk6\DR6

  I get this message every time I try to run a slide show program showit web. This happened only since I added a hardrive external seagate.

  Hey Kori,

  Until resolve us the problem, verify the following information on your computer and view the results in return.

  • Browse to the location of the slideshow installed showit web?
  • Check by disconnecting the external harddrivve and try to launch the program and check if you receive the error message.

  I also suggest you to change the assignment of drive letter for the removable hard drive to one letter other than drive C and check if that helps.

  To change the drive letter assignments, follow these steps:

  1. sign the computer as an administrator.

  2. Insert the external hard drive.

  3. Click Start, right-click computer and then click on manage.

  4. click on disk management.

  5 right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.

  6. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.

  Restart the computer and see if you receive the same message.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Equium A60 freezes when I insert a disc into the CD-ROM drive

  Hello

  I have a problem with my CD drive - whenever I put a disc in it freezes the computer laptop everything! I can't do anything that even the mouse pointer hangs on the page.

  I have to close the whole pc and start again - what is happening again and again, but he will accept the disk of 1 to 10 times. The drive itself emits many noises whirring etc...

  Help!

  Rachael

  Hello

  My brother had the same problem with the laptop (not Toshiba).
  The whole operating system froze after the insertion of a disk of some. I put t remember if it was a DVD or CD.
  However, nothing works after a long investigation, I gave up and installed a new Windows OS.
  This helped and since the new installation of the OS, everything works.

  But this does not mean that this will help settle the question about the machine you!
  Maybe you drive malfunctions and must be replaced

• Error - Please insert a disc into the drive trying to open & H R Block at home software CD.

  Original title: XP will not launch my H & R Block at home software CD.

  I bought the & H R Block at home tax software to target and Windows XP will not launch the CD in a CD/DVD players.  I tried manually running the software, but whenever I get the response "Please insert a disk in the drive", even if the disk is in the drive.  I tried other CD and they work all including the H & R Block CD provided in the mail.  Any suggestions for ways I can manually launch the CD ROM?  I returned to the store and exchanged, and the second CD did the same thing.

  Hi AALLIS,

  You did it all change hardware or software on your machine before this problem?

  You can follow this link & check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.

  Please post back and we do know.

• Windows 7 HP C4380 (just the driver) device driver

  I would like to install the HP c4380 for Windows 7 device driver (just the driver none of the other stuff (toolbar yahoo, etc.))

  Anyone know where can I get this driver.

  Download driver HP page provides the following

  This download includes the HP Photosmart Software Suite and the driver. If you only want the print (without the Photosmart Software Suite) driver

  Which suggests that a basic driver install is possible without giving the necessary information for the driver.

  Thank you very much

  Hello

  For Windows 7, only a complete of software features available for download and not a basic package.

  However, you can still install the drivers of base only.

  1. Download and run the full installer of features:
     http://ftp.HP.com/pub/softlib/software11/COL30677/MP-76047-2/PS_AIO_02_USW_Full_Win_WW_130_140.exe
  2. At the conclusion of the license agreement, you will see 4 links above:
     Click on the link 4 (software to install HP) and remove all optional components.
  3. Click OK and continue with the installation of the basic software.

  Kind regards

  Shlomi

• Application popup: wercon.exe - disc no.: there is no disc in the drive. Insert a disc into drive F?

  Not too sure about what to put in.

  In any case, this message came earlier today (it is what it says in the event viewer), when I went to run reports on problems and solutions. F is a DVD writer (SATA A one). I replaced the IDE DVD the other day. What is the DVD has to do with this opening program? : why it needs a disc, before it will open?   If I click on continue, it will open / run. Its update. Its been scanned for viruses etc with MSE. And it's clean. Anyone know?

  Any information appreciated. Vista x 64 is on it. Thank you

  In the end, I had to format. Something weird / strange has happened. This version of Vista is legitimate, BUT no matter what I tried, (after), if I changed the b/g for a solid color (blue).

  Which is what it was originally, it changed in black after I rebooted.

  And no matter what has been started (originally, Inc. MSE), the programs were running, but no icons appear on the taskbar.

  And Virtual PC has been installed (I had installed an XP ISO with him). But what happened, wiped away completely! (as I did a system restore). Only prob was, SR has been disabled at the time.

  And all the programs that were in the menu disappeared (the ones I installed, not windows default programs). Though even they were still installed (their records were there)