Repeat the Setup commands

Similar Questions

• Repeat the send command while pressing a button

  It's like on some devices that have buttons instead of dials volume, reproduction if we press audio and hold down the button, volume button, repeat for senginf volume control on the ramp upwards or downwards. I couldn't understand how I can achieve this in LabVIEW, someone has any suggestions? Thank you.

  Use a switch until the button out.

  When the switch must be, yourself set up with a timer which will continue to increment the value as long as the button is set to True.  When he goes to false, you can stop incrementing and stop the clock.

• Why Notes continue to repeat the files all the time

  Whenever I have start a new file in the Notes, he continues to repeat the file whenever I tap on a button

  Please, back up all data before proceeding.

  Check the accounts of the Internet or the preferences Panel Mail, Contacts and calendar to make sure that you do not synchronize Notes in more than one account.

  If you aren't the case, temporarily disable the synchronization of Notes. The notes will remain on the server and other devices, as appropriate.

  Leave Notes, if it is running.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.Notes

  Copy the line of text to the Clipboard by pressing Control-C key combination.

  In the Finder, select

  Go ▹ go to folder

  in the menu bar. Paste in the box that opens by pressing Command + V, then press return. A Finder window should open a selected folder. If this is the case, move the selected folder - not only its content - on the desktop.

  The folder you are moving is called 'com.apple.Notes', it is not the subfolder named 'Data' or anything else.

  ATTENTION: If you move all or part of the contents of the selected folder, but leave the folder itself, the application cannot start. Move the entire folder will be be rebuilt automatically.

  If you use OS X 10.11 ("El Capitan") or later, repeat with this line:

  ~/Library/Group Containers/group.com.apple.notes

  Re-enable synchronization of Notes.

  Notes to restart and test. If it works now, delete the files that you moved. Otherwise, leave again and put each backrest where she was, by crushing the that may have been created in its place.

• How to run the DAQmxGetTaskChannels command

  I'm reading the attributes of task of MAX by using various DAQmx with VB6 controls.  I found that a simple task of load (DAQmxLoadTask) generates a valid taskhandle of a known in MAX taskname that can be used to get the measurement data using the analog in the command "Read" (DAQmxReadAnalogF64).  The results seem to be already scaling according to my setup in MAX. What I want to do is read the names of the configuration tasks in MAX, select a VB and then read the names of channel and the ways of treatment of MAX and measurement data. I tried the following commands without error but still see a result null in the output string variable.

  DAQmxGetTaskName

  DAQmxGetTaskChannels

  DAQmxGetAICustomScaleName

  Curiously, the command, DAQmxGetTaskNumChans, book with success the number of channels in the setup of MAX.  With this information, I can get the measurement data, but I don't have the engineering units or the names of custom channel for my header output file to include with my measured data.

  I was wondering if the problem is related to incompatibility with newer versions of daqmx? Or maybe another reason?

  I use Windows XP, with service pack 6, a NOR-DAQmx 9.2.2 VB6 and NI DAQPAd-6015.

  Hi hutchins2,

  Thanks for posting, click on the link below that seems to be the reason for our problem:

  Textual DAQmx Device Information functions will return a NULL result

  Eric NOR

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• MAR3200: access to the WMI command-line

  Hello

  I'm setting up a MAR3200 (C3230ENC - 2WMICE - K9 V01 / Version 12.4 (2) T4, VERSION of the SOFTWARE (fc2)). I can access the router through Telnet and the CLI, but I have not found a way to access the WMI command-line for Setup (ssid...). Can anyone give an indication?

  Thank you in advance

  Best regards

  Alain-Claude

  Hello:

  The MAR has a console interface to enclusre series for each WMI command-line. These are normally at the top and labeled by WMIC, i.e. WMIC1, WMIC2. Console in this interface as you would the MARC and configure it as a 1200 AP. WMIC 1 should be connected F0/0 inside the compound. WMIC 2 is usually connected to F2/3 on the FESMIC. If you use a command line WMI uplink to a solution of Mesh 1500 series or any other non - Cisco AP, consider the universal solution of bridge as detailed in the Enterprise Mobility 3.0 SRND working group. Note also that the "mobile station" command when it is used on a radio interface causes flow challenges (caveat) if the MAR is not the uplink to another MAR or IOS AP.

• Flash Builder on Mac Lion 10.7.5 4.6: cannot run the Setup program: certificate revoked

  Hello

  You are aware that FB 4.6 is not install more OS x 10.7.5 and maybe OS X in general?

  Because I really need design view last FB does not offer, I just downloaded 4.6 FB for OS X from Adobe: Adobe - Adobe Flash Builder 4: for Macintosh: Flash Builder 4.6 - Mac OS: thanks

  My real OS X is 10.7.5, Lion.

  Launch of the install.app, it appears an error window:

  

  Please be aware that I know that this message comes from Gatekeeper, see for example: OS X: on Gatekeeper

  The fact is that this problem is not solvable, apparently.

  The problem is with the application signing certificate, as you can see issuing the command:

  bash - 3.2 # spctl - has Install.app

  Install.app: CSSMERR_TP_CERT_REVOKED

  So, here we have a certificate of _revoked_, not a certificate/developer unknown or app unsigned.

  Indeed, unfortunately the problem persists even disabling Gatekeeper:

  bash - 3.2 # spctl - status

  co-pays disabled

  since apparently a revoked certificate is not an error that can be ignored or circumvented somehow.

  As far as I KNOW, the idea behind this is: Apple actually provide no verification quality on applications (they are not "approved by") but may possibly (if there are "problems") block a via the recall mechanism. Because of this, the _revoked? _ check cannot be bypassed/disabled. I'll try as soon as POSSIBLE an upgrade of the OS to see if with the Mountain Lion (10.8) I can possibly force execution Install.app, but chances appear to be rare so far.

  So, Adobe, can you help me please?

  Maybe sign with a certificate valid for this installer...

  FB4.6 is essential because it is the last version with DV. I had to install FB46 on Windows to keep working, but it's no doubt slow me down as everything is on Mac.

  ARO

  a pro developer.

  Hello all, good news: after updating to 10.8.5, Mountain Lion I was able to run the Setup program and all went well.

  Mountain lion allows the user force execution through the command open context menu (CTRL-click) and it works, just as simple as that.

  So my advice is: If you want to install or reinstall Flash Builder 4.6 on a Mac with Lion installed, updated to Mountain Lion or better to avoid problems.

  Apple introduced some (not all) Gatekeeper 10.7.3 and following features, but apparently you need a full-fledged 10.8 to also have what you need to work around a revoked certificate error.

  Since usually OS X has auto update active, if you run Lion you find with 10.7.5 and do not install FB46. If you manage to somehow hold 10.7.2 I guess you should be able to install FB46, sincerely I don't check it out. In any case, it is simpler and safer to move to 10.8.x.

  Good bye

• Repeat the last action

  Hey guys,.

  In Corel draw when you select an object and apply a color or move/resize the object you can then select the next object and press Ctrl + r and repeat the last action at the newly selected object.

  Is there such a function in Illo CS4?

  TIA

  Chris

  The color of the last object is always repeated but other changes such as moving and resizing is, D (control) command

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• How can I disable the voice command all together?

  I hope someone can help me.  In recent months I have experienced a problem with my iPod Touch [128 GB] which I have not had in the past.

  I plug my headphones to listen to music when I'm about to go for a walk.  However, soon after my iPod in my pocket, the voice command is activated (see image).  I have the firm down, but I still have problems.  The music I listen to speed upward (as it is sent) or he's going to jump until then randomly in the track or other tracks.  The voice command is activated again at irregular intervals.

  I don't know if it has something to do with my headphones (attached image), which has a built-in microphone.  The reality is that I never use the voice command and don't think I ever have to use it on my iPod.

  I read on the deactivation of Siri, but Siri is already disabled.

  Thank you very much

  You can disable VC turning Siri.

  I would try another pair of headphones. I suspect that the headset turn on VC.

• I want to disable the shortcut command + q

  I want to disable the shortcut command + q

  Not negligible

  Try some of these web pages.  If they do not contribute, then Google 'disable the command-Q' and you can find something that helps

  <https://apple.stackexchange.com/questions/45252/can-i-globally-change-the-cmd-q-shortcut-to-require-holding-for-two-seconds-lik>

  <https://www.quora.com/How-do-I-disable-Command-q-in-OS-X>

  <https://apple.stackexchange.com/questions/78948/how-to-disable-command-q-for-qui t>

• Where is the Refresh command from the page menu of Firefox on Mac?

  Cmd + r used to refresh the pages for me, but for some reason any stopped working in Firefox. It's pretty easy remap the command to a menu item, but the item menu to refresh page in Firefox is gone! It has been under notice. I looked in all the menus, but the Refresh command seems to have been deleted. Of course, I use the icons, but it's just bulky.

  I can't see how to close a question. CTRL + R has started working again, so I would like to mark this as resolved.

  That said, as a suggestion for the development of Firefox, I recommend to get away from the idea of the menu Burger - one of the worst DCP interface of all time in my humble OPINION!

• My playlists on apple music continues to repeat the first progress song and custom to the next song

  My playlists on apple music continues to repeat the first progress song and custom to the next song

  Hi, tabby1008!

  Thanks a lot for the use of Community Support from Apple! After reading your post, I understand that when you listen to music from Apple, one song keeps repeating instead of skip to the next track, when it finishes. I wouldn't listen to the same song over and over again when Apple's music catalog is so big, so I'm happy to help you!

  First of all, check that the "repeat" feature is not enabled. The following article gives some information about the feature 'repeat' and what to look for.

  Use of music music Apple in the app

  The "Shuffle and repeat your music" section provides this information:

  Shuffle or repeat your music

  Press on at the bottom of the playback screen to mix songs in a playlist or album. Alternatively, you can ask Siri to scramble your music.

  Type once to play entire playlist or album looped or twice to repeat a song.

  When activated, the icon for a repetition will be "BOLD". If this is the case, type just the icon to activate the recurrence at the wide. The next page of this article will show you where these buttons:

  

  If the repeat function is turned off, try closing the music app using the steps described in the article below.

  Force a nearby application on your iPhone, iPad or iPod touch

  Once the music app is closed, press the icon to open it again and then try to play your songs. If one is always repeat, restart the device. Instructions on the way can be found in the following article.

  Restart your iPhone, iPad or iPod touch

  Good listening!

• Download again the setup of Yosemite?

  Download again the setup of Yosemite?

  Double click on the Yosemite install (or Mavericks) results in:

  

  The choice of re - install brings another error:

  ERROR: This is not the right way to reinstall Yosemite. Use the installation program that you downloaded before.

  These are the installers I downloaded!

  As you can see I downloaded them both to the store:

  (Unfortunately my .jpg screenshot proof was not accepted)

  If anyone knows how I can get more Yosemite installed on a new internal drive without erasing it first, please let me know.

  I'm waiting for my Apple file number: 1130824637 decide. I can't believe that apple would do something like

  to force people to upgrade to El Capitan, which I can't use because of its driver-incompatibility with my thousands

  $ audio-hardware! I tried all the suggestions for this problem on the net. Help please!

  W.W.

  Maybe one problem with Apple since other recently reported the same problem