Repeated errors of SSL certificate after upgrade to FF36

Similar Questions

• Intel technology quick start error in event visors after upgrade to Windows 10

  Hello

  I get questions with technology Intel Rapid Start after upgrade my Portege Z30t-A-103 to 10 Windows.

  The Windows Event Viewer shows:

  irstrtsv
  Error: Cannot read LBA sector directly

  I tried to disable the technology Intel Rapid boot from the BIOS, but it seems that the problem is not resolved.

  Any ideas?. I guess that an Intel Rapid Start driver technology is coming.

  Kind regards

  Intel might be the point to approve their Windows 10 pilots, at the same time just keep it disabled in BIOS for now.

• OBIEE 11 g parse error: error 500 - internal error from the server (after upgrade to 11.1.1.9)

  Hi, I have a problem after the update successfully from 11.1.1.7 to 11.1.1.9. All the upgrade steps are successfully completed. But the analysis is down with the error below. Presentation server seems to be down and will not start. Sometimes it starts and still the same error. Any help would be appreciated.

  Parse error:

  Error 500 - Internal server error

  bifoundation_domain.log / bi_server1 - diagnostics.log

  < 3a6e0f40214b390d:-386ebfa2:14e69d6303c: - 8000-0000000000000023 > < 1436294858264 > < OBI-SEC-00101 > < failed validation of the system – the system user profile user is not found in the identity store.

  oracle.bi.security.service.UserProfileNotFoundException

  at oracle.bi.security.service.URIdentityStoreProvider.getUserProfileHolder(URIdentityStoreProvider.java:378)

  at oracle.bi.security.service.SystemUserValidator.validateSystemUserProfile(SystemUserValidator.java:224)

  in oracle.bi.security.service.SystemUserValidator.access$ 100 (SystemUserValidator.java:32)

  to oracle.bi.security.service.SystemUserValidator$ 1.run(SystemUserValidator.java:116)

  to oracle.bi.security.service.SystemUserValidator$ 1.run(SystemUserValidator.java:110)

  Thank you

  RC

  The problem has been resolved by removing the Active Directory (MSAD) of the list of suppliers and creating a new bisystemuser in the defaultauthenticator.

• Corruption of the repeat rate of the keyboard after upgrading vsphere 5.0

  I currently have a problem with some of my XP VM.  We have a group of two moderators which I upgraded to esxi5.0 recently and since the upgrade of the tools on a number of machines that I had the following problems.

  Using the Vsphere console have not seen a problem with RDP.

  On XP but NOT on Linux or windows7

  After the reboot the virtual machine, and then at a random time, the keyboard repeat rate going funny IE, press a button and release it as fast as you can results in 20 characters in the Notepad window.

  Can solve the problem by going into the properties of the keyboard in the control panel and change the keyboard typematic rate, it does not matter what you change to or if you change it back to where it started, the problem disappeared for a while.

  The problem refers to a random time again and can be fixed in the same way.

  Restart the virtual machine has no effect.

  VCenter restarting has no effect.

  Restart all clients of VSphere has no effect.

  Restart the local running vsphere client pc has no effect.

  Opening of the two consoles on different clients in different vshpere on the PC to connect to the same VM - you can have the issue and the other may not have a problem.

  VSphere client 5.0.0 / 455964

  VSphere Host1 5.0.0 / 469512

  VSphere Host2 5.0.0 / 469512

  I don't know what else to try, any help would be greatly appreciated.

  Welcome to the community!

  Try increasing the value of "keyboard.typematicMinDelay" of the virtual machine. Ref: http://kb.vmware.com/kb/196

  • The virtual machine power off
  • Make a right click Select Edit virtual machine settings
  • Click Options > general > Configuration settings
  • Click Add a line
  • Under name, enter keyboard.typematicMinDelay in the value to 2000000
  • Click OK
  • Turn on the virtual machine

• Error to the store after upgrade

  I've just updated Itunes to version 12.5.1.21 on a Windows 7 Machine Pro 64-bit

  When I try to access the store, I get the crash of the application with this error.

  Nome dell' application che ha generato error: iTunes.exe, version: 12.5.1.21, time stamp: 0x57d32fa7

  Nome del modulo che ha generato error: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c12000

  Exception code: 0xc0000005

  Compensate for the error 0x0000000000645e36

  ID processo che ha generato error: 0xbd4

  Ora di d dell' application che ha generato error: 0x01d20e9ec9d1baef

  Percorso dell' application che ha generato error: C:\Program Files\iTunes\iTunes.exe

  Percorso del modulo che ha generato error: C:\Program Files\Common Files\Apple\Apple Application Support\WebKit.dll

  Segnalazione ID: 1594e02a-7a92-11e6-b03d-480fcf28e784

  I already tried to perform a clean install after a complete uninstall (all components in the order recommended by Apple).

  Any idea?

  Thanx

  Hi BR1_80,

  Thank you for using communities of Apple Support. From what you said, it seems that iTunes crashes unexpectedly when accessing the iTunes Store on your Windows computer. Looks like you already have a troubleshooting. I recommend you to read this article, it may be able to help solve the problem.

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  See you soon

• Date / time error on the SPA3102 after upgrade to the SW version: 5.1.7 (GW)

  After the upgrade of the software of the date and time of my SPA is taped:

  Current time: 01/01/2003 12:10:11

  and therefore can not save. I tried to change to multiple NTP IE: time.nist.gov or ntp.sipgate.net but nothing gives.

  Anu suggestions how to solve this problem?

  Make sure that the machine is on the internet or that he makes the DNS server addresses.

  You can also try to point to an IP address of the local computer to use his time.

• Sync error of blackBerry Smartphones after upgrade to the latest Blackberry Storm

  Hey North Carolina!

  I've recently upgraded the OS on my Storm using the Desktop Manager.  Since then, I get an error of synchronization as follows:

  "Intellisync.

  ---------------------------

  Error has occurred. Error code: 0x8004fceb.

  See the documentation.

  ---------------------------

  OK ".

  and he abandoned the "schedule of treatment device.

  I downloaded the Blackberry Desktop Manager and reinstalled, but continue to make the same mistake.

  Can anyone help.  It is much appreciated

  Hi and welcome to the forums!

  You have a corrupted in the calendar folder:

  Thank you

  Bifocals

  This problem may be caused by one of the following:

  1. One or more contacts in contacts, information is missing or has invalid characters in the firstname fields, lastor company .
  2. There are attachments in the calendar app

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB14818&sliceId=SAL_Pub...

• After upgrading to FF36.0.4, I can't view pages that require Flash Player.

  I upgraded to FF 36.0.4 and was unable to access pages I had before. I installed the latest Shockwave Flash 17.0.0.134 and Quicktime 7.7.6 and facilitated National Weather Service still unable to display radar images. FF says I plug in but not which. Homepage flash gives same msg where it should tell you what version you have.

  You have:

  C:\Windows\System32\Macromed\Flash\NPSWF32_17_0_0_134.dll
  

  One of the possible reasons for a plugin not installed on the addons page are if Firefox has been set NOT to scan the registry for plugins. Another is that the settings of Firefox, plugin data storage file is corrupt. Here are the steps to check these possibilities:

  Confirm that Firefox scans the registry for plugins

  Firefox detects the plugin Flash to a registry entry. Some users have scanning disabled for some reason any. Here's how check and fix this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the scan and make a pause so that the list is filtered

  (3) If plugin.scan.plid.all is not set to its default value true, double-click it to activate it by default.

  If you have changed this setting, close and restart Firefox to start another analysis.

  If you see the Add-ons, Plugins section page again, you will find 'Shockwave Flash' it?

  If Firefox is set to scan, but still do not find the Flash and the list on the page Add - ons...

  Remove the registry file for the plugin for Firefox

  Sometimes the pluginreg.dat file is damaged. You can remove it and Firefox plugins re-scan.

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • Menu help > troubleshooting information
  • type or paste Subject: support in the address bar and press enter

  In the first table of the page, click on the "view file" button to launch a new window of Windows Explorer showing your settings files.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • File menu > exit

  Pause while Firefox finishing its cleanup, then rename pluginreg.dat to something like pluginreg.old

  Launch Firefox back up again. (If you want to restore your previous session non-private use history > restore previous Session.)

  When you return to the page modules, 'Shockwave Flash' is finally here?

• Pre complains about SSL certificate on the exchange server

  Hello.  I just got a pre and tries to set up to communicate with an exchnage server.  Pre complains and will not set up the connection with this error message: «"SSL certificate error.» Is the date and time correct? ».  The date and time are correct, but the server is running a self signed certificate.  This causes no problems with iPhones that use a lot of people here.

  How can I fix it?  It is not all parameters for this problem.

  I spent the weekend trying to test and understand what was going on.  I found that if I nominated the e-mail server (name after HTTPS: / / in Setup) the same as the name of certificate displayed in the Certificate Manager (Launcher > Device Info > more info > Menu > Certificate Manager), the error should disappear.  The problem for me was that the name of cert in cert Manager was different from address of mail server (in my case server. [domain .local] instead of mail. ([Domain_name] .com).  The transformation it seems to use is:

  (1) find the certificate...

  (2) CN is HTTPS: / / in the installer?

  (3) If no, use error 'Verify the certificate, date and time not correct' (or whatever it is) - If Yes, go to HTTPS: / /.

  (4) Exchange requires safety pin?  If no, proceed to synchronize - if so, use error "unsupported of security policies.

  So I looked more closely CERT and it held several common names (CN) for the cert.  It seems that ANY OTHER DEVICE can filter through the list of common names, and use the one that works.  The Pre uses only (whether first or last, I don't know).

  So, there are two options for the certificate problem (I guess the 3rd is that you can return the phone):

  FIRST SOLUTION

  =====================

  (1) check the name of cert in cert Manager.

  (2) if it is a name that can be resolved DNS (i.e.  [mail]. [mywebsite]. [com]) then change this setting in your exchange installation program in the mail server field beside the HTTPS: / /.

  This will only fix it if your COMPUTER administrator has with permissions on the used field.  It is possible that an alias is used on other areas

  SECOND SOLUTION (as I have done)

  =================================

  (1) ensure that your Certification Authority is installed.  You can do it by clicking START > ADMINISTRATIVE TOOLS > CERTIFICATION AUTHORITY - OR - on a computer on your network using IE/Safari/Firefox and typing http://server/certsrv.  If the page is found, then you are installed, if not, then you will need to have installed.

  NOTE: SBS 2003 WILL AWARD A CERT TO THE IIS WITHOUT THE ROOT CA.  THIS SEEMS TO BE THE PROBLEM WITH THE AUTO CERTS GENERATED I HAD

  (2) If you have not installed it, go to this topic, it is well written to get step by step instructions how to install, create demand for cert, create the cert and install the cert (it took me about 30 min).   http://www.MSExchange.org/tutorials/SSL_Enabling_OWA_2003.html

  NOTE: IF YOU ALREADY HAVE A CERT ON IIS, YOU NEED TO REMOVE IT AS IT IS "DEFECTIVE" CERT BEFORE YOU CAN REQUEST A NEW CERTIFICATE.  YOU MAY BE ABLE TO REINSTALL OVER THE NEW CERT, BUT I DON'T KNOW

  (3) open https://mail.domain.com/exchange on your computer - display details of the cert and save the file on your desktop - if you are using a laptop, you can also install it on your laptop to use for use outside the Office (this is also a good back-up that you can use to get more later if needed again).

  (4) plug your pre in USB mode.

  (5) slide the cert and unplug the USB cable

  (6) go to cert Manager

  7) tap on the icon of "Sun" at the bottom left

  (8) press on the new file cert that you save in USB mode

  (9) to confirm that the new cert appears with the name of the correct mail server

  10) go to the e-mail program and configure the exchange account

  The above will create a REAL root cert (not IIS domain root Cert) that the Pre can work with.

  Really, I don't know that how/why Palm overlooked this possibility because they claimed so-called does not want to sell to companies who need strict security requirements.  For me, it means a small / medium company that has limited IT supports (according to the needs, pay as you or green guy with limited knowledge).  Then, why they test the GER in this environment, I'm not sure.  I bet they were tested on their own network, which has all the correct methods, best practices for the management of cert.  I guess it's like the developers that they have offended and almost lost their support until turned it over and said: 'sorry, we really want make you programs for our platform WebOS. ".  We've just been paranoid for so long salivate us when the bell rings. "They just didn't beta test this well enough.  The sad result of this is that Sprint will have to address all of the sheets because this certificate simple reading process was given only minimal recognition capabilities.

  But having said that - I'm now completely in love with my pre!

  I'm happy to try to help if you need it.  I found a lot of the forum of solutions were not enough detailed, so do not hesitate to contact.

• SSL certificate tool Automation error level 3?

  So I'm working out KB 2041600. I'm trying to update the certificates on two servers separate vCenter and I get the same error "can not determine if the inventory Service is registered with Single Sign-On - errorlevel is 3" while improving my certificate inventory. "." See full changelog below *.

  I am 100% positive that my certificates are correct. I used Derek Seamons scripts in the past to generate my certificates and it has worked for other vCenter servers. I have completed step 1 and replace the certificate for the SSO. I'm just stuck in the service of the inventory now. I opened a case of pension as well.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 1

  [Thursday June 26, 2014 - 14:51:26.61]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  [Thursday June 26, 2014 - 14:51:57.01]: update of the last confidence Inventory Service operation to

  Single Sign-On completed successfully.

  [Thursday June 26, 2014 - 14:51:57.01]: go to the next step in the plan, which was received

  Scheduler of update steps d.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 2

  [Thursday June 26, 2014 - 14:53:50.92]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  [Thursday June 26, 2014 - 14:54:23.93]: update of the last confidence Inventory Service operation to

  vCenter Server completed successfully.

  [Thursday June 26, 2014 - 14:54:23.95]: go to the next step in the plan, which was received

  Scheduler of update steps d.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 3

  [Thursday June 26, 2014 - 14:54:47.90]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  Enter the location of the new stock Service SSL cert file (default is):

  C:\Certs\Inventory\chain. (MEP):

  Enter the location of the new private key of Service inventory (default is: C)

  (: \Certs\Inventory\rui.key):

  Enter the SSO administrator user (default value is: admin@system-doma)

  in):

  Enter the SSO administrator password (not displayed):

  [.] WARNING: Certificate ' CN = vcenter01.burdweiser.com, OU = vCenterInventoryService,.

  O = Burdweiser, L = Houston, TX, C = ST = US signature uses low one-way hash (SHA

  (- 1). In a secure environment, it is recommended to use SHA2 256 or higher has

  algorithm of h.

  [.] The supplied certificate string is valid.

  [Thursday June 26, 2014 - 14:55:14.12]: last update of functioning inventory Service SSL cert

  ificatsanitai re has failed:

  [Thursday June 26, 2014 - 14:55:14.14]: unable to determine if the inventory Service is registe

  Red with Single Sign-On - errorlevel is 3

  In my case, I was trying to replace the certificates before an upgrade from 5.1 to 5.5. The easiest route taken was to uninstall SSO and the inventory service and then proceed to the upgrade to 5.5. After that, replace the certificates.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2057340

• Error update vcenter SSL certificate?

  Hello people,

  I've recently upgraded to vcenter 5.1 U1a successfully.

  I'm following VMware articles and a popular blog to prepare and run the certificate VMware 1.0 automation tool.

  http://www.derekseaman.com/2012/09/VMware-vCenter-51-installation-part-2.html

  http://www.derekseaman.com/2013/04/using-VMware-vCenter-certificate.html

  Everything was pretty smooth up until I have to replace the the vcenter Server SSL certificate.  Option 2 vcenter update ssl.  See the attached photo.

  After the error, my vcenter service will not start.

  I tried to reset the password of database using vpxd.exe - p, but vcenter still does not start.

  I also checked that the correct service ID is matched between vpxd.cfg and LS_ServiceID.prop.

  Stuck at this point.  I have since went instant return, but try to see if anyone has any suggestions?

  Could this be type a bad password?

  Thank you!

  
  

  You mentioned the KB as well?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2048202

  Concerning

  Girish

• ASA uses that certificates self-signed after upgrade to 9.4.1

  I came across a strange issue after upgrade to 9.4.1... (from 9.3)

  However I access the ASA (browser, Anyconnect, etc.), it offers only a self-signed certificate even if an appropriate SSL certificate installed.

  I checked:

  SSL-trust VPN_Portal_TP point
  SSL-trust outside VPN_Portal_TP point
  SSL certificate authentication CAF-timeout 5
  interface outside port 443 SSL certificate authentication

  is configured.

  • CA is installed, too.
  • Reinstalled all certififcates.
  • Reassign the Trustpoints

  Any ideas would be greatly appreciated... Thank you!

  I did have time to test this out on my laboratory unit yet, but there's a thread related here.

  I'm not positive on the standard resolution immediately - it will bring close watch.

  Perhaps the first person to prosecute TAC may share the resolution.

• VCenter Server 5.1 SSL certificate update - error

  Hi all

  We set up a new Windows 2008 R2 server as a vCenter Server 5.1

  Now, I try to install the new certificates for all parts of vCenter (server, inventory, web client service,...) with the Windows certification authority.

  I'm stuck at the update server certificate SSL vCenter with the 'Certificate SSL Automation Tool'.

  This is part 5. in this guide (5. the cmd screen shot):

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2041600 #updatestepsplanner

  All credentials are correct, but I still get the same error (vc-update - ssl.log):

  [26.04.2013 - 10:42:54, 99]: copy the new certificates and keys 'C:\ProgramData\VMware\VMware VirtualCenter\SSL. '... »
  [26.04.2013 - 10:42:55: 00]: creating the PKCS certificate file...
  Could not reload vCenter SSL certificates
  [26.04.2013 - 10:42:56: 22]: ""cannot reload the server vCenter SSL certificates. " The certificate could not be unique. » »
  [26.04.2013 - 10:42:56, 24]: new certificates and keys deleting...
  [26.04.2013 - 10:42:56: 25]: restoration of the certificates and the original keys...
  1 Datei () kopiert.
  1 Datei () kopiert.
  1 Datei () kopiert.
  [26.04.2013 - 10:42:56: 25]: attempt to restore...
  Could not reload vCenter SSL certificates
  [26.04.2013 - 10:42:57, 08]: ""cannot reload the server vCenter SSL certificates. " The certificate could not be unique. » »
  [26.04.2013 - 10:42:57: 10]: new certificates and keys deleting...
  [26.04.2013 - 10:42:57: 10]: restoration of the certificates and the original keys...
  1 Datei () kopiert.
  1 Datei () kopiert.
  1 Datei () kopiert.
  [10: 42:57, 13 - 26.04.2013]: failure of the update of the certificate of vCenter.
  
  
  So I tried the manual way, as it is mentioned in this guide:
  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2035005

  I'm stuck here too, get a 'result of Method Invocation: vpx.fault.SecurityConfigFault ' after ""Invoke method ': "

  1. Go to https://localhost/mob/?moid=vpxd-securitymanager & vmodl = 1 on the server vCenter Server and load the certificates for the configuration using the managed object browser.
  2. Click continue if you are prompted with a warning on this certificate.
  3. Enter a vCenter Server administrator user name and password when prompted.
  4. Click reloadSslCertificate.
  5. Click the calling method. If successful, the window displays this message: result of Invocation of method: Sub.

  
  

  I tried to fix this, but there is not really a solution for this:

  http://communities.VMware.com/thread/429035

  so, I need help with this question

  SOLVED!

  Steps to follow:

  1. stop the vCenter service

  2. search for your ID in LS_ServiceID.prop in the folder C:\ProgramData\VMware\VMware VirtualCenter

  3. copy this ID (e.g. {C4672589-9258-42B1-90E2-1EF268BBD402}: 5 )

  4. change your vpxd.cfg in the same folder and replace

  vCenterService

  with

  your ID

  5. start vCenter Service

  Then, the SSL automation tool works!

  You need to undo changes.

• the upgrade to vCenter 5.1.0b and SSL certificates

  someone knows if this minor upgrade will be stomp on the SSL CA (SSO, inventory, vCenter, Crossover, etc.) the certificates that we have thoroughly improved when we went from 4.1 directly to 5.1.0a?

  Thank you.

  Hello

  Your existing certificate will be in place while you perform the upgrade to vCenter server and after upgrade too.

  Concerning

  Mohammed

• When you access Intranet sites that use SSL certificates issued by our internal PKI, FF for Windows gives an error of "incorrectly put in the form of message coded DER"

  When to access Intranet sites who have the SSL certificates issued by our internal PKI, FF for Windows gives an error message - an error occurred when connecting to myshaw. Security Library: improperly formatted DER encoded message. (Error code: sec_error_bad_der)

  Chrome and IE work fine. This is a PKI again using the signature SHA-2 algorithm.

  I was able to identify the problem. Our public key infrastructure has been using some signature algorithms that FF did not support.