Repeated message: Windows - No disk "Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c Exception", I have to reboot to remove and it returns. How can I fix it?

Similar Questions

• Windows no. disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6b7c

  I get this message pop up randomly. Any ideas on how to get rid of it, or what to check. I can leave the computer, walk and pop message. Makes me crazy.

  Windows no. disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6b7c

  I was looking for a solution to this error and found the blog entry from GFF #5 to be the answer.

  http://forums.techarena.in/Windows-Update/1009223.htm

  "The answer lies in the words" Windows: No. disc ', your PC is looking for a USB.
  device - a USB stick or a cell phone, for example - that you recently plugged
  and removed without using the option 'remove hardware safely' in the
  lower right part of your screen. The last USB device you used
  back in the USB port and then use the option 'remove the software safely.

  The pop up message will disappear. »

  In my case, I didn't plug the USB device, I just need to click on the "Remove hardware safely" in the system tray and it say remove the device that is connected is more.

• Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will be closs after several attepts.

  Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will close after several attempts.

  The message above appears on start up. Want to know how to prevent it from happening?

  Hello

  • What were the changes made before the show?
   
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  I hope this helps.
  
   

• Stat of the system upward with the error: Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Original title: Getting a weird error message. Seems to be the floppy driver.

  Hello. This problem everything seems to start when I changed my drive letters. Finally, I think it points to my floppy drive A.

  I get these error messages when I start my computer. Windows tells me this: No. disc: "treatment of Message of Exception c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c". It happens about 8 or 9 times then goes away.

  I have several internal hard drives, 2 optical drives, A floppy drive, a card reader and a printer. I decided to shift the drive letters down after hard drives since I have recently installed a dual-boot and needed earlier letters to the editor. The problems started before the dual-boot has been installed. Changed this example of drive letters: g-i, h-> j > I-> k, etc. The main readers have remained the same.

  I uninstalled the floppy drive and the controller, Windows re - installed after re-booting of course.

  I disconnected Ribbon floppy motherboard and the power supply. The messages stopped. I then uninstalled the floppy drive and the controller in Device Manager. I reconnected it A floppy Ribbon and power, loaded windows reinstalled the drivers and then gave me the error emssages once again.

  I have a DVD of Windows XP Home Edition 32 bit SP3. Telling me to do a repair isn't the best idea, because nobody has explained how it works. When the DVD goes in the car or at the start: there is no repair function.

  Thank you.

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• No disc: Exception Processing Message c0000013 parameters 75b6bf7c 75b6bf7c 4 75b6bf7c error.

  No disc: Exception Processing Message c0000013 parameters 75b6bf7c 75b6bf7c 4 75b6bf7c error.

  Hi I am running Windows XP Media Center version 5.1 SP3.

  Automatic update of MSFT is on. When he went to install the last update, this error started to appear. I remember offline a disk or flash drive. To remove I have to click Cancel like 10 or 20 times. How to solve this? Thank you!!!

  Hello

  Step 1: In some cases, the problem occurs because of a virus or malware. Before you try the following options, perform a scan of the computer. To do this using Microsoft Security Essentials, visit the following Microsoft Web site:

  http://www.Microsoft.com/security_essentials/default.aspx

  Step 2: If the problem persists, you might find that a device that has been previously deleted is still saved. In this case, you can solve this problem by removing these devices.

  To do this, click the remove the device safely in the notification area and remove any attached devices is no longer.

• Start the problem - Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Boot PC I started getting the error message next - Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c - anyone know how to get rid of this?

  Murray

  http://www.Symantec.com/business/support/index?page=content&ID=TECH144464

• I get the following message when I login: "Processing Message c0000013 parameters 75b6bf7c 75b6bf7c Exception".___Also, cannot install Adobe Falsh Player.

  I get the following message when I login: "treatment of Message of Exception c0000013 parameters 75b6bf7c 75b6bf7c".  I hit Cancel and it appears 2-3 times more, I hit cancel each time.

  I have Windows XP Media Center Edition Version 2002.  I just loaded Service pack 3 as well as a few other updates.

  Not sure if it's related, but thought I would mention it since others have mentioned the USB port.  Since I got this computer, I always had two cords into the USB port on the back of my PC.  When I want to synchronize my PDA photos or uplaod to my camera, I'll use these two cords pluggeed in my USBs.  What is the problem?  Too bad, it was working before SP3.

  Also (probably unrelated), I had problems with Adobe Falsh Player.  I'm trying to install an update and get always frozen.  The system is configured to add not Add-Ins/Active-Xs without authorization by me, but it crashes whenever I try to give him permission.  Is this related to the updates?  After the problems started, I uninstalled Adobe Flash and it worked, but the relocation has not yet.  (Many applications use this and it's VERY frustrating!)

  Any suggestions would be helpful!  Thank you...

  Hi Mearth,

  Thanks for posting. These issues occurred right after that you have loaded the SP3? Also when you say that you sign on, do you mean log in your computer?

  I hope this helps! Let us know some information so that we can your problems solved! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Receive error message - the user profile service has no log on. Failed to load the user profile. -How can I fix?

  I CAN NOT LOG - ON

  I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• my windows media player does not burn. He told me that my files have errors and burning rights how can I fix this ty

  How can I fix media player ty so much. I used it for 6 months works well, then it says all this as needed and will not burn now. : ()

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with burning files with Windows Media Player.

  What operating system is installed on the computer?

  Run the Fixit and check if it helps.

  Difficulty video Windows Media Player and other media or from library (Fixit)

  Meet us if you encounter any problems with burning or any Windows problem, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Exception Processing Message c0000013 parameters 75b6bf7c at startup

  Possibly caused by an update to Windows XP. I get this annoying message whenever I start my computer. It starts with "Windows - no disk". Once I have that then I get the Message of the Exception processing, as shown above.

  How can I solve the problem?

  Hello

  1 have had any changes made on the computer before the show?

  2. have you used any USB (Universal Serial Bus) device on the computer recently?

  I suggest you to see link for a possible solution and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-no-disk-exception-processing-message/b1a67525-d5e8-46AE-9801-6b169547e656

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• exception processing message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  It just started coming, and I don't know why. I'm on windows xp media edition and service pack 3.

  After the net looking for answers and find some suggesting renaming of readers, etc., etc., I found this (and it worked for me):

  Here is your answer after 3 hours online with HP

  Here are the steps.

  Click Start > run.

  Type in regedit and click ok.
  You will get a pop-up window in the registry.

  Click on + sign at HKEY_LOCAL_MACHINE.

  Click on + sign at SYSTEM.

  Click on + sign at CurrentControlSet.

  Click on + sign at control.

  Click on windows there.

  You see ErrorMode key on the side panel right?

  0X00000000 (0)

  Double click on ErrorMode and change the value to 2 and click ok.

  Now, you need to restart the PC and after that you will not get the
  Windows NO disk error

• Siri on my Mac isn't able to use applications such as the Messages and Photos.  How can I fix it?

  I have upgraded to Sierra and try Siri.  I can't get Siri to send messages, find files, or open photos.  He said "I don't see an app for that.  You will need to download a.  What is the problem.  How to do those things that are given as examples in the documentation online to work?

  Assuming that you use correct dialogue for Siri to send a message, for example and you have MacOS Sierra properly installed and that you have system preferences > Siri enabled:

  Check system preferences > Security & Privacy > privacy > location Services and be certain "Siri & dictation" is enabled.

  Correct dialog box is something like: "send a message to Joe.  Hello period. »

• I have Windows Vista with Microsoft Works. I would like to make the computer to be bilingual in English and Hebrew. How can I do? Just reply to * address email is removed from the privacy * thank you

  I have Windows Vista and you are using Microsoft Works. I would like to make my computer b bilingual English and Hebrew. How do I dot it? Just reply to * address email is removed from the privacy * thank you

  Hello

  I suggest you follow the steps in the link below and check off the question:

  How can I get additional language files? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  I hope that the information above helps you.

• Help: Floppy Drive gets error "Windows - no disk Exception Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c treatment".

  Dell Deminsion 3000, Windows XP Pro SP3, Version 2002, Pentium 4 processor 2.8 GHz, 2.00 GB of RAM disk Y-E Data YD - 702D

  A: floppy drive appears in my computer and in Device Manager where you can read it and the controllers are working properly.  But the diskette in the A: drive is not visible in disk management.  I tried UN-installing, re-installing and updating readers.  I also did that the BIOS was set to Auto & 1.44 3.5.  What can I do to fix this?

  Hello

  This problem seems to be caused by software conflicts or by malware (virus or spyware etc.).

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to run the scan on the computer online and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• processing message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c when connected Blackberry 9800

  First time I experanced this problem = connect the new Blackberry 9800 (Touch) via message from cable and USB rec

  Try what it says here

  run "regedit" then go here

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Windows]

  Then, search for the name ErrorMode and change its value data by right-clicking on the errormode itself and change the value from 0 to 2 date...

  Looks like it may have something to do with a floppy disk. If it is installed disable it in the BIOS. If you do not use