Repeated restart of the modem necessary?

Similar Questions

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• Why is wifi repeatedly turn to the?

  Why is wifi repeatedly turn to the 'settings' in a few minutes?

  Read here: connect to Wi-Fi on your iPhone, iPad or iPod touch - Apple Support

  Note: Restart your Wi - Fi connection and also check if your wireless router has a firmware update from the manufacturer

• Portege M750 restarts after the standby or Hibernate mode

  Since I remmember I use my laptop with activate the sleep and hibernation features.
  A couple of days, it started not to restart after the sleep or Hibernate mode.

  You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

  Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

  This happens with different OS cause I tried to reinstall and the problem persists.

  > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

  I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
  If there is an error in the B slot, the LED will Flash orange and green twice.
  If the error is in the two slots, the LED flashes twice green and orange.

  By the way: it's your BIOS up-to-date?

• When I want to use the modem 711 error messages or 1068 appear

  Everything was going well on my new L series with windows 7. Then after a few months, I tried to connect to the modem to check my email. He won t connect.
  Fortunately, I still have my old computer, so I tried it worked. I googled Error 711 and as was suggested on other sites in windows. Nothing has worked.

  S so here is what I got: Error 711, go to services and change it to manual startup.
  He was already on manual start. Error 1068 same thing. What they said to do has already been done in management programs. So why doesn't it work?

  Modem is installed, I even tried uninstalling and reinstalling, but that made no difference. It of been a week now and nothing I will fix it. I only have the drive for laptop recovery, so it works with all that Toshiba put on it at the factory.

  I also tried the system restore, but when it restarts, I get the message of this system restore could not perform the full restore. Any additional programs are approved windows and works well. With the exception of iTunes that keeps telling me to change the compatibility mode that doesn't even go as far as windows7 and ivolume who won t recognize iTunes 9.0.2.

  Another problem I have is this iTunes update no longer far as 11,90 MB download before stalling in the process.

  Hello

  To be honest your ad is a bit confusing and not clear enough...

  I m not one expert with Modems but if errors occur even after using the Toshiba Recovery Disc I think that it s a hardware malfunction, and you should contact a service provider for help.

  If your recovery disk doesn't work, you can get a new from an authorized service or a new, you can order online but it s based on your laptop.
  Moreover, why you didn't post the information on your laptop?

  Sorry, but everything that s what I can say at the moment.

• Sound problems and the modem EA60-155

  3 weeks ago I received my laptop EA60-155 and have experienced ongoing problems with the sound and modem on the laptop. I bought the laptop from currys so am sure that they are an authorized dealer.

  The problem is different, sometimes I turn on the laptop to find out, there is no sond and the modem does not work, sometimes the sound works and makes the modem for about 15 minutes before the problem arises again. I bought the machine to the dealer authorized to Bahrain twice now, twice they said them that the problem was resolved when he doesn't. I called the center of appeal twice, but I still have the problem. Any advice would be greatly appretiated.

  Hello

  If you have this problem permanently, you can try to reinstall the modem and sound card. If the unit is pre-installed with recovery DVDs, it should work fine. As a first step, you can try and remove the sound card and the modem from Device Manager, then restart the device. The two hardware components must be recognized and installed again.

  If there is no success I recommend you backup your data and reinstall the OS using recovery DVDs. On this way the unit will be clean installed and there should not be any problem. Every problem that happens after that can be some hardware malfunction and you must contact the Service partner again.

  Good luck!

• Issues with the modem with XP Pro after upgrading from xp family

  I upgraded to XP Pro and cannot create a dial-up connection because this option is not available for me. I checked the Microsoft support pages and enabled dial-up as suggested by using regedit.
  Still no difference. So I guess that the modem or the modem settings are the problem. Ive tried to download the driver couldn't get one for xp pro.can someone tell me the necessary driver for xp pro

  In Control Panel, if I go to phone options and modem, I see "Toshiba Software modem AMR COM4" but, if I go into the settings of the Modem in Control Panel, I get the message that the modem is not installed correctly and I have to uninstall and reinstall. I did this several times without success.

  He drives me crazy - can anyone help?

  Hi Mikey,

  as a first step, it would be good to know which model you have.

  Then we can compare it with other models and perhaps a driver XP modem to another model fits!

  For the first time, here is therefore a standard modem installation oder.

  1. check if the modem is entered in the Device Manager
  2. check if the modem is configured and that it works?
  The Control Panel must be open and go to the phone
  options of modems and. It should be your modem!
  If it is not shown to you, then you must install the
  modem driver.
  3. double-click on modem and go to the Diagnostics. The
  modem query button queries the commandments with
  check the return signal. This will give you some additional information
  the modem works properly.
  4. then set up a standard dial-up connection to your
  provider of
  5. go in the properties of the modem (Device Manager) and the
  Check the brand in the "wait for dial tone before dialing" has NO
  been resolved!

  You can try!

  Pete Bye

• Anyone having problems with the modem from Cox and Time Capsule

  Hello

  Lately my internet falls down every day or every two days with Cox. I have reset the modem, the time capsule, the routers extreme apple, etc. shut down and restart my whole network. I called Cox every two days to refresh the modem.

  I heard that I may need to reconfigure my Time Capsule (acts as a router) to avoid this problem.

  No one knows what to do here?

  Thank you

  Please, try the following:

  Open the AirPort on your Mac utility (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the time Capsule

  Click on edit in the window that appears

  Click on the Internet tab at the top of the next window

  Click the Internet Options button at the bottom of the window

  Make sure that the IPv6 configuration is set to Local link only

  Click on save, if you make changes, then click Update at the bottom right of the window

  When Cox fully implements IPv6 (they are not), you may be able to return to the automatic configuration.

• COM/LPT ports on Satellite A10 lost and can't use the modem

  My Satellite A10 lost ports, and I can't use my modem.
  What can I do?

  Hello

  I think you should remove the modem from Device Manager. Restart the machine and the operating system should recognize the modem again. Then you can reinstall the modem driver.
  All this should be done automatically and you need t to add all ports.
  The properties must be enabled if you have administrator rights.

  Thanks and good luck

• Satellite A200 PSAE3: Windows XP Home edition do not recognize the modem and sound card

  Hi all!

  I can't understand what is the problem with my Satellite A200 (PSAE3)... I downloaded all the files on the right of the Toshiba Download Center, updated the BIOS to WXP but XP still not find any sound card or any modem. He isn't finding a device with a "?" question mark on this...

  There are so many different drives, I tried, but no one has changed the situation...
  Anyone has any advice?

  Thanks in advance,

  ciroopi

  Well, I found the solution to the problem! :)

  so, I write these verses down for anyone who might know the same problems:

  as usual, strictly follow the 'Toshiba A200 Installation sequence' found on the TOshiba driver download page.
  as he [I jumped no useful installation programs]

  I advice restart you each time you install a component, in order to have under control the whole Exchange.

  1 Windows XP Service Pack2 (RTM) - of course ;) -.
  [...]
  DirectX V9.0c 5 (SP2)
  Windows Media Player 10 V10.00.00.4036 6
  [...]
  10 Microsoft .NET Framework V1.1.4322 (SR1)
  11 Sun Java 2 Runtime Environment V1.6.0
  12 Intel ICH8M Chipset utility V8.2.0.1014
  13 Intel VGA driver 6.14.10.4833 965GM

  Note that driver VGA, the ATI we too, was also a difficulty - in fact, I don't know what it would have done - for the AUDIO sound card.
  You may have read in the installation dialog box.

  Moreover, I do not know if you must install the sun java, .NET framework and WMP version that displays the list, versions that are OLDER than the most recent, but just to be sure, download the form versions THAT NET.

  at this point, you should see "unknown PCI device" in the unknown devices in the system control panel.

  14 Realtek ALC268 Audio Driver V5.10.0.5433

  for realtek, I suggest you download the driver from the zip from the realtek download page; Once extracted from the latest version for desktop or a temp directory, I suggest to install before all the patch KB888111 you might find in the \WDM_Rxxx\MSHDQFE.

  then restart.

  for now, you should not see the "unknown PCI device" no more where it was before, but under the "system devices", like her, where you could also end the "Intel PCI Express Root Port", "Pci Bus" and so on [ja? m saying this to you because ja? m Italian aid of XP, and I don't remember the exact English names...].

  Now, install the audio drivers by using the setup.exe that you find in the \WDM_Rxxx directory.
  It should reinstall the kbfix and install the new drivers.

  Reset.

  After the reboot, nothing happens, but...

  .. see the "unknown pci device" menu - here? m not sure the name but the one with the exclamation mark in the 'system devices' - select 'Properties' and then 'driver' and 'update driver'. Let XP find the NOT on the net. tell XP to look for "Video and Audio Controller, game" [you know, the English entry that usually stands for device audio and similar] and he must find a CORRESPONDING driver, which is the "MICROSOFT UAA BUS DRIVER for HIGH DEFINITION AUDIO".
  If XP don't select this driver by itself, you should look for "\windows\system32\DRIVERS\hdaudbus.sys".

  After that, XP automatically detects ALL audio devices and install the correct drivers.
  In addition, it now the entrance to the modem, modem to install the separate driver, that we could find in down in the "list system", like her, on the Toshiba download page.

  So, hope this helps!

  See you soon,.

  Francesco

• Cannot install the Modem Satellite Pro A200 XP driver

  I'm a local network for Newbold College administrator. New mobile A200 and we need XP Pro on some of them. I tried to install the modem driver as one of the last drivers downloaded from the website of European support. I also tried the Canadian site as well.

  The driver installation program does not appear to do anything. I tried to manually install the driver for a Windows modem Agse/Toshiba software modem, but I have com port problems and I can not quire of the modem.

  Can someone help me please!

  Hello

  What to say; I checked the driver Toshiba Europe page and found all the drivers XP necessary and important for the Satellite Pro A200.

  Please note that the European driver Toshiba page provides drivers XP 3 different satellite Pro A200 series! There are PSAE1, PSAE4 and PSAE7 series.
  Please choose the right!

  In addition, you will find a txt file of installation instruction on the page of Tosh.
  In this file, you will find a good and important driver installation order! Please follow these steps!

  I put t know exactly why you get the modem com port problems but I guess a new installation of XP and the driver should fix this strange problem.

  Good luck

• Satellite L300 has no sound and the modem also does not work

  I have this Toshiba Satellite L300 (PSLB8A - 1F004) an Australian model who was working perfectly until I changed the hard drive after he developed bad sectors.
  I installed Win Vista Business.

  I have all drivers (TOSAPINS file) provided with the original hard drive, but when I installed the drivers in the correct order. IE chipset, modules, audio, modem, and all the other pilots.

  There is still a little red x on the taskbar saying: "no audio output device is installed" and I also noticed that the modem is not listed in Device Manager. I also tried to replace a work from a cell phone same model modem card, but it still shows no signs of picking up the modem as well as his driver.

  I made the attempt to download the drivers from mytoshiba.com.au under the exact model and the OS and installed but nothing helps, the problem is still there.

  No sign of modem picked up and the little red x on the taskbar always shows "no audio output device is installed" and on Device Manager, is not to show the audio or modem. There is also nothing in the typical yellow marks and also I tried to show hidden devices but there is still no sign.

  Is there something else I missed that I can try again?

  WewakMaster

  I agree, with Akuma. First remove the audio controller from Device Manager (can be found under audio and game controllers).

  Then update the Vista of the State. All patches and Service Packs must be installed.
  Then, restart the device and install the driver Audio from Realtek ALC268 from here:
  http://www.MyToshiba.com.au/support/computers/satellite/L300/pslb8a-01f004/download?OS=15

  Should work

• My Y510 is unable to connect with WiFi need to reset the modem, and sometimes both

  Hello

  My Y510 sometimes does not connect if my Wi - Fi if one of them started earlier then the other, I went to the media and automatic downloads to make the drivers and software upgrades through its tells me that all devices need update is no update. To connect to wireless internet, I restart my modem, and sometimes both.

  You guys you suggest... Thank you

  Check the site of the manufacturer of the modem for the firmware update if available.

  start-up your computer, press f8 to load in SafeMode (networking) and try again, lets see the problem persists.

  If the problem persists, uninstall the network drivers, restart your computer and install it again.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• need to reinstall the modem driver pci

  Somehow, I accidentally uninstalled my pci driver, is it possible to reinstall this?

  Hello

  Are you receiving error messages?

  What is your model of computer?

  Press the Windows flag key + R to open the run

  Type devmgmt.msc

  Press Ok

  There is a yellow question mark or an exclamation point indicating?

  Right-click on it and select Properties

  You should see a code in the window.  The return POST code #.

  Click Ok

  Click on the + sign next to the Modem to expand the menu

  Right click on the modem driver and select uninstall

  Close the Device Manager

  Restart the computer

  Windows will reinstall the driver