Replace a color on all or several layers

Similar Questions

• Is there a way to control the color (or other properties) of several layers of text at a time?

  A frequent case when you design a Web page:

  I create text elements/blocks and each a title, body, etc...

  each title is a separate text layer and I use the actual content (so no lorem ipsum)

  Is there a way to set the color of the text as separate dynamic object or kind of style? So when I want to try other color I would be able to change it in one place and it applies to all linked text layers that use it...

  Dynamic objects using works fine for repeated identical items, but not when the elements are different as these texts...

  The library using CC allows you to set the style that can be applied again to several objects, but in the case of a PSD file complex with a long list of records and layers, it is very difficult and a lot of time to select all the layers desired by hand and apply them the style you want...

  In the end, I'm looking for a clear way to define a style sheet: fonts, colors, attack, variants, etc. as distinct kind of "smart objects"...

  Is this achievable in Photoshop?

  Create a solid color fill adjustment layer and turn it into a smart object. This duplicate SO using ctrl/cmd-J and hang it on all the text layers you want color. You can then open the SO and change the color and it will be applied to all the text layers that this particular SO is cut to.

• connecting several layers to change the color and font

  Hello forumers.

  ID like to know how I can change color on all layers at once, im trying to connect all the layers together by clicking on the 1st and the 20th layer in shift and each of them are selected.then id like for example to change the font that is absent on all the layers.what I'm here and on?

  weather is changing the color to all layers at once, or font change or the mixture of modes etc etc (I would just know the procedures).

  Thank you.

  In this case, highlight the text as said Mark layers and

  Then go to layer > Type > replace all missing fonts.

  MTSTUNER

• Import Illustrator file with several layers and sublayers as composition by keeping all layers and sous-calques

  I drew a map of the country with several layers and sous-calques, including the streets, cities, railroads...

  Now, I want to create a template for my colleagues in After Effects.

  To do this, I want to import the AI in After Effects, holding all sublayers and layers in compositions and subcompositions.

  When I do, I get the first two layers correctly, others just in a merged publication.

  What can I do to get all the layers of each as a layer in After Effects?

  Best regards, Raphael

  Illustrator imports only the first level of the layers. If you have groups or paths below you must release layer groups. The layers will then be stacked in the order in the form of layers. Then you need to move them to the top.

  The procedure is to select a layer in the layer Illustrator Panel, then without selecting any which specific element in the layer click on the menu in the upper right corner and select release to layers. All an elements in this layer will be transformed into layers. Now, select all, and drag them to the top above the original layer. This will leave the empty original layer and put all the elements in new layers.

  Here is a tutorial I made there are a bunch of years and who uses this technique to transform a mixture in a morphing.

  Morphing with Adobe Illustrator. I hope this helps.

• replace black color

  I need to replace black in the present with other options of color for my friend who is the designer and wants to see how other color combinations work and I tried replacing bothe color and hue saturation methods but they allows firstly the bizarre neony results and works at all. Any ideas? Thank you! :))

  Hi Carmel,

  Its black never easy evolution how be it in Photoshop. A girl with black hair generally turn a blonde is closing impossible to do convincingly. As soon as you lift the luminance of the lack of detail information appears immediately. However, it may be false. Do not expect to be able easily to bright yellow or orange intense and keep it looking real.

  

  If this level of quality is high enough to you how you do it. I'm afraid that this is not a topic to beginners but if all goes well

  You can experiment

  First take the original image and reproduce them. We are working on the layer duplicate or higher.

  (1) with the tool lasso around all black areas draw. Here is a very rough selection

  (2) in a store the selection in quick mask mode.

  (3) go to the color range. What we were doing before was only to give color range, a good starting point, do not make a good choice.

  In the drop-down list select shadows and if you set the blur, but its not required. This will give a reasonable

  selection of black areas. Create a layer mask so only the black areas are visible. You will always have the original image in the stack of layers provides the background.

  (4) now how the color is changed. Create a gradient above the hidden layer map. Set the layer mode to color. You may need to pick up the cards degraded, but essentially, you have a simple gradient and color at one end of the gradient is mapped on the darks of a picture

  and the color at the other end is mapped to the light of an image. Gross over simplification, but it is the principal. So, if you start with a simple

  black-white gradient and change the black to tell red he maps the color red to dark areas of the image. The white end of the gradient can be left in the

  White as the image is largely black. You need to cut the card of the hidden layer gradient - that is important. You will find black in the object will be replaced by the red, but the bottom layer is not affected.

  (5) now, create a hue saturation adjustment layer and clip that to the gradient map. You will find you can now move the hue and change saturation

  and even the luminance.

  (6) Finally, use a curves layer to fine-tune the contrast.

  I've only used a red on white gradient here, but you could experiment with several layers of the gradient map and this will probably give you a better range of colors

  Hope that helps

  Terri

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• Replacement tool color using Images?

  I tried to understand how this artist created for this purpose, but I'm still totally lost.

  It seems almost as if the tool replacement of color over the flowers, he was able to get a photo out there without losing the texture of flowers.

  Someone has an idea how to do this?

  

  I'm sure it's a little more, more the very selected topic, various masking. Simple things can take several coats to achieve. It's one of the things on the misconception on Photoshop: people think it's just a few keys and... Presto, you have a stunning picture. Most of these images take a lot of trial and error, many layers, many ways of folding and masking to make them work.

• several layers with a reduced opacity

  Hi all

  I'm working on a file, Indesign has several layers which are both about a 10% capacity.

  When I just put the two on 10% obviously, you can see the bottom layer through the top layer.

  What I want is that you will not be able to see the layer of background (despite the top layer of 10% opacity), but simply to see the white background just as if it would be not another layer below.

  In the example image, you can see what I have now.
  So what I want, it's that you will not see the logo of the carbrands under the word Scantools.
  Is this possible?

  Thank you very much
  Eric.

  

  You can also simply use a tint of the color rather than reduce the opacity of the word SCANTOOLS.

• Printing printer Lexmark 2600 problems - it prints half a line after replacing the color cartridge

  It prints half a line, if the top or the bottom of it and the cutting of the other party.  This happens on every third line.

  This started happening when I replaced a color cartridge and ran the alignment page.  Before replacing the cartridge, it prints very well (except that the color cartridge started missing).   When I noticed what was going on, I took both cartridges on and then put them back in and had to print the alignment again page.  Yet the problem persists.
  I checked the Device Manager, and my drivers are up to date.  I also checked all connections.
  Any suggestions are welcome.

  Oh boy.  I don't know what I thought.  It just had to unplugging everything & then reconnect them, turn off & on.  This took care of it - seems so simple now.

  I guess it was my new laptop which has the printer all confused.  Win7, my find of CL.

  Insofar as the Lexmark support, I have not yet that day.  In any case, it comes to X 2690 model I had for centuries, so I guess that support would be of any help.  I mean, the guarantee missed a long time ago.

  Thank you for taking the time to answer.

• Management of several layers at the same point

  Hello

  I use the API in my application and Javacript Mapviewer, more than one layer can be established at the same point. I use MVThemeBasedFOI. If you click on this point, I want to give the possibly to choose which layer you want. Now when I have several layers, only the last can be clicked. Is there a way to solve it?

  MVThemeBasedFOI.setBringToTopOnMouseOver (boolean).   I found this method, but how do I access all layers when I click on a point?

  Thanks for help.

  ESC.

  I tried really hard things to fool this behavior. At the end of the search for new features that were not in the documentation, I found this: MVMapView.enableMultiThemeClickable (boolean). They should update the documentation because there are a lot of functions implemented that do not exist.

  Just enable it and it works perfectly!

  mapview.enableMultiThemeClickable (true);

  ESC

• Replace Document colors Bug

  All known bugs to replace the colors in the document?  I am running windows 7 with new Acrobat Reader DC.

  For example, if by default my document is black text with a white background and I change the white text and black background (Edition > Preferences > accessibility), I now have with black background and white text pages and other pages unreadable with black text on a black background.  Again, I have change the green on a black background and yet my entire document has a black background, but now some pages contain the green text, others have white text, and others have black text and cannot be read.

  What is the fix for this problem of accessibility?

  This does not solve the problem.

  The problem seems to be that Acrobat Reader only changes the color of the text for a single page in the document.  I found a work around by going to Edit > Preferences > accessibility.  There's a box of "change the color of the art online as well as text.  If this box is checked, then uncheck the box; If it is not checked, then check that it and the color of the text for all of the document should now be correctly formatted.  This procedure seems to ignore any bugs in the code it keeps updating the color of the text on each page, but these steps should be done whenever you need to change the color of a word processor based PDF.

• Can I extend several layers in the editing Photoshop CC 2015 Panel?

  I am creating a video using a PSD with more than 80 layers, I can choose several layers in the timeline panel, but when I try to drag to lengthen it just drag one of them all...

  Is that possible or I really need to drag one by one (cause it is REALLY bad)

  Hi Iskander1989

  The only way I remember just made one at a time.

  Also tried again here so yes need to drag one by one.

  ~ Jitendra

• Add layer with several layers

  The biggest waste of time for me, when working with layers is when I want to add a new layer that must appear in all compositions of layers. I have to manually go through each layer comp and enable the visibility of the newly created layer, because it is hidden by default. Are there are 20 layers then this really takes a ton of time.

  Is it possible, when you add a new layer in a photoshop document, to have it by default visible in a set of selected layers?

  Thanks for the reply but this isn't what I was asking... My question was about the creation of new layers - and making them appear automatically in several compositions.

  In any case, I think that I figured it me:

  1. first, multi - select layers to who I want the new layer is visible (using shift + click or order in the layer comps palette)

  2. all the layers can create will be visible by default in the selected layers.

• One form of layer appear and disappear all the other layers

  I do several layers with a single shape in each layer and I need them all to display on my screen. Whenever I click on a layer to modify, all forms of the other layers disappear until I click on a new layer so that its shape appears and others disappear and so on and when I try to save the image, the resulting image is a blank page. Can you help me??

  Hi eslam_m,

  Would you suggest to reset the Photoshop preferences and then try to create several shape layers and modify them.

  For the restoration of preferences: https://helpx.adobe.com/photoshop/using/preferences.html

  Kind regards

  Claes

• Need help to count the characters in several layers of text

  I use following code to count the number of characters and words in a single text layer. Is it possible to count the number of characters and words in a several layers of text. ?? Help, please

  Java Script code:

  //

  /*

  < javascriptresource >

  < name > Count words and characters < / name >

  < / javascriptresource >

  */

  function run()

  {

  var layer = activeDocument.activeLayer;

  If (layer.kind is LayerKind.TEXT)

  {

  Var words = layer.textItem.contents;

  Words = words.replace (/ (\r\n|\n|\r) "/ gm," "");

  var countwords = words.split("").length;

  var compteLettres is words.split("").join("") .length;.

  Alert ("\n" + countwords + "Words\n" + compteLettres + "Characters", "Count");

  }

  on the other

  {

  Alert ("select a layer of text.', 'Count');

  }

  }

  Run();

  2015, use it at your own risk.

  #target "photoshop - 70.032»

  If (app.documents.length > 0) {}

  var theTexts = main();

  alert (count (theTexts.join ("\n")));

  };

  ////////////////////////////////////

  int main() {}

  the file;

  myDocument var = app.activeDocument;

  get the number of layers;

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Dcmn"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var applicationDesc = executeActionGet (ref);

  var number = applicationDesc.getInteger (stringIDToTypeID ("numberOfLayers"));

  treat the layers;

  var theLayers = new Array;

  for (var m = 0; m<= thenumber;="" m++)="">

  try {}

  Var ref = new ActionReference();

  ref.putIndex (charIDToTypeID ("Lyr"), m);

  var layerDesc = executeActionGet (ref);

  var layerSet is typeIDToStringID (layerDesc.getEnumerationValue (stringIDToTypeID ("layerSection")));.

  isBackground var = layerDesc.getBoolean (stringIDToTypeID ('background'));

  otherwise the layer group.

  If (layerSet! = "layerSectionEnd" & layerSet! = "layerSectionStart" & isBackground! = true) {}

  theName var = layerDesc.getString (stringIDToTypeID ('name'));

  theID var = layerDesc.getInteger (stringIDToTypeID ('layerID'));

  var hasText = layerDesc.hasKey (stringIDToTypeID ("textKey"));

  If the layer type;

  If (hasText == true) {}

  var textDesc = layerDesc.getObjectValue (stringIDToTypeID ('textKey'));

  Letexte var = textDesc.getString (stringIDToTypeID ("textKey"));

  theLayers.push (theText)

  }

  }

  }

  catch (e) {};

  };

  return theLayers

  };

  Count characters.

  function count (theString) {}

  Var words = theString//layer.textItem.contents;

  Words = words.replace (/ (\r\n|\n|\r) "/ gm," "");

  ////////////////////////////////////

  Remove double spaces and space at the end;

  While (words.indexOf("")! = - 1) {words = words.replace ("","")};

  spaces var end = \s$/;

  Words = words.replace (spaces, "");

  ////////////////////////////////////

  var countwords = words.split("").length;

  var compteLettres is words.split("").join("") .length;.

  return ("\n" + countwords + 'Words\n' + compteLettres + 'Characters');

  };