Replace cartridge Deskjet 1512

Similar Questions

• DeskJet 1512: replace ink cartridge Deskjet 1512

  First time need of black ink - have tried to use the torch and a magnifying glass, but cannot see where the cartridge remove and replace.

  The document here can help change the cartrdige in your printer Deskjet 1512, or watch the video here:

• Designated replacement cartridge Deskjet 6840 does not fit

  My cartridge three-color HP Deskjet 6840 #97 on ink was insufficient. I tried to replace it with a #99 Photo. He did not fit into the slot, that I had removed the #97. It turns out that there is a ridge on the top of the #97 which is shifted to the right of the axis of the cartridge. The #99 has a ridge that is offset to the left of the central axis and interferes with a piece for the printer and thus, it can accommodate so not entirely (installation). The manual indicates that the Tri-Color #95 or 97 #, color #99 and #100 grey all work in the 6840.  Does anyone have any ideas on how I can get the #99 knitting (other that cannibalize the cartridge or the printer)?

  Note: I have 4 cartridges #99, I intend to use for photo printing and this can be a problem for big $.

  The 99 cartridge actually goes into the black cartridge slot. The 97 and 99 are free cartridges because the 99 adds three additional colors (light cyan, light magenta and black in the photo).

• HP Deskjet 1512: Range of printers HP 1512: open door

  Hello

  I bought the printer HP Deskjet 1512 today. I established in accordance with the instruction manual and also installed the data CD. However, when I go to print, I get a message the next door. This obiovusly keeps me to print, I also tried to copy that does not work! I tried closing and open all the doors and the withdrawal / re - insert the ink, but nothing don't seem to do the trick.

  Please help because it's a big inconvience to me now, and there is very little useful help currently avalbile.

  Thank you

  Nick

  Hi @nick96,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your new printer HP Deskjet 1512. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem.

  The HP Deskjet 1512, has two doors at the front. the inner door is the door of access to transport and other is the output tray.

  If you can see the inside of the printer where the cartridges are the transport access door is open and must be closed.

  Please see the beflow images.

  

  Source

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• DeskJet 1512: Deskjet 1512 printer does not install...

  Hello

  I have a Deskjet 1512 printer ' All in one '.

  I followed the instructions of installation and configuration up to the last comma - and still some 6.5 hours later - I still have a new printer that doesn't work.

  I am running Windows XP / SP3 / Dotnet 3.5

  I ran the installation disc (supplied), made a cup of tea, ticked the boxes, responded to the questions.

  When you are asked (and only when prompted) - connected my USB cable and the printer to the computer... This is where the problems started.

  The function of 'Full' whistles and software bells began to try to detect my camera.

  He was defeated by Windows Harward "Wizard" - saying it had detected a new device... but it can be installed "due to a missing Module.

  About 2 seconds later - the HP software "Full Feature" he spits is dummy and tells me to connect my printer and check the USB cord...

  Yes - I replaced the power cord USB ther with 4 different ones I have alternatives, but also try different USB ports on my computer.

  Always the same question.

  However-

  The Scanner was installed - and works very well.

  So, I tried a forced installation of "Backdoor" of the drivers of the printer - via the Windows hardware Manager.

  This all seemed so promising - the pilots finally looked as if they were installing.
  99%, the hardware Popup Manager informed me that my "device had been correctly install '...

  About 1 second later - another window will appear - now telling me that it was not possible to "do something"? and that my ' device was not installed.

  A quick look through the driver manager showed me that my scanner was installed, but the printer was not.

  I completely uninstalled the HP software, then Dot Net... cleaned all Temp files and deleted all entries in registry rogeu.

  Then restarted my computer (after checking that USB 2 has been enabled in Bios - who it was)

  I then reinstalled the far Dot Net (downloaded via the HP Web site) and the "Full Feature" software (also courtesy of the HP site) this day... and...

  .. even the same.

  In short - I tried:

  • Remove all previous installations of HP and Dot Net 3.5 software
  • Relocation of all of the above
  • 4 x different USB cords
  • All the different USB ports on my PC
  • Swearing and the curse (usually works with Microsoft Products only)

  The only thing I have NOT tried, is witch Craft and Country dance.

  Any other suggestions would be very appreciated...

  Update...

  I completely erased from my hard drive and reinstalled XP, SP3/Net fix...

  The printer is installed the first time.

  If everything is working now.

  There was something installed hidden somewhere that the installation process didn't like.

  Thanks for your help with this.

• printer driver another 'HP Deskjet C 990"which replaces the Deskjet 6122?

  Can someone tell me how to get the download for the other "HP Deskjet C 990" printer driver which replaces the Deskjet 6122 for Windows Vista 64? HP sends me everywhere, except at this link.

  I'm sorry you had a problem in downloading the driver 990c. (Shane_R) has a great post on how to download this.

  Here is the link for him. Let me know if it helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

• DeskJet 1512: scanning problem

  Hi, I have deskjet 1512 all-in-one printer. I have a copy in black and white button as well as a copy in kept button but can not see a scan button as I had on my old previous model?  Is it possible to scan breeds?

  Thank you

  Hello

  Your pritner do not offer a scan button, so scanning should be launched from the HP software.

  Click the HP Deskjet 1510 icon on your desktop or in the start menu > programs > HP > printer your template folder and press on scan a Document or Photo and the ofllow the steps on the screen to scan.

  You can find more detailed information of its options in the section "scan with the HP scanning software":

  http://support.HP.com/us-en/document/c03466081/

• DeskJet 1512: How mover, page and other information of printed pages?

  This must be a simple process; but, how remove the printed title, the page, the date printed on the DeskJet 1512 pages? Thanks for any help!

  Hi usafirechief,

  What type of program you are using to print? You should be able to remove this information by adjusting the settings within the program.

• HP DeskJet 1512: DeskJet 1512 Installation fails with Windows 10

  I just updgaded my g7 HP Pavillion from Windows 7 to Windows 10 and I can not get my DeskJet 1512 to work.  I went to the HP site to shoot down the latest drivers from my drive for installtion of origin has no Windows 10 drivers on it.  Driver downloads, but the installation fails with the message: "the an installer for this device cannot perform the installation at this time."  I have administrator rights on my laptop, no one else is logged on, and I have no other applications running.  Any suggestions?

  Hey there John!

  Please try my suggestions and getting back to me. You can try downloading and running the print and Scan Doctor then choose "Difficulty of printing" and let it run its course. See what the end results you show here and then try again to print. Please also let me know what the results show.

  Try printing a few programs various (Notepad being one of them please) to see if the problem is with a single program, or all of them. Maybe a firewall can block the connection, try to leave this option off when you try to print from the few programs.

  Good luck! Enjoy your day

• HP Deskjet 1512: printing

  Please help, I am trying to print from a c/d crafts on my new printer and a message comes up saying printer could not print Flash.  The test page printed ok

  Hi @Ladybird2,

  Welcome to the HP Support forum.

  I understand that you have a printer all-in-one HP Deskjet 1512 that a computer is Windows 10, and when you try to print from your CD of crafts you see a message indicating that the "printer could not print from Flash. I want to help you with that.

  Adobe has released an update for Adobe Flash Player on January 5, 2016. You can get the update for Adobe Flash Player by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• DeskJet 1512: How to scan a document, paper or a MS Word file, using the Deskjet 1512.

  I need to know how to scan a Document MS/file or print using the HP DeskJet 1512. I found no instructions on the way when the printer/Scanner/copier was purchased from Wal-Mart in Dinuba (California).

  User Guide: http://h10032.www1.hp.com/ctg/Manual/c03832527

  Analysis means scanning a paper copy of a digital file (image or with OCR to editable doc). You analyze a word doc, as it's already digital (file).

• HP Deskjet 1512: Attempt at analysis of a series of 1512 HP Deskjet

  Hello, I wonder if you could help me. I'm trying to scan a document using a HP Deskjet 1512.

  I tried to access the icon for the HP Deskjet printer, via the Start button, then he takes me into all programs, can I access the HP icon, it indicates the series HP Deskjet 1510. I noticed, that he did not actually 1512 series.

  Anyway, once I clicked on series HP Deskjet 1510, below that he has highlighted study to improve product HP. It does not emphasize the installation of HP Scan.

  In the past, I used to have a version older than a HP printer and never had any problems. Once you have pointed out the HP icon, it will give you the option of detection etc.

  For some reason, this model doesn't give me that option immediately. I would appreciate help with this.

  Thanking you.

  Hi Gemini2

  I would like to say thank you for having responded to my query re: above.

  Thanks for the link re: drivers mising, but didn't know about this path. You mentioned that there was a possibility that I might have to uninstall and reinstall the software.

  So, after having researched a bit more, I realized that it was more than likely that I had only the basic features installed.

  So, I decided to log on for my printer and re-installed HP website the full software for my HP Deskjet 1512. He took me to the registration also. I do not uninstall anything beforehand. Is it installed only the bits I didn't have before, can not be sure, but I noticed in the section devices and printers to my computer, it did not create another icon of the printer etc..

  Once the installation process is complete, I could see all of the features, including the option to scan.

  I tested the printer by printing a document and scanned a photo that I sent to me by e-mail.  Both worked well.

  There seems to be a lot of people out there who has similar problems with the analysis option. It seems that unless you install the FULL software for this printer, features as the scanning is not available.

  So, once again thank you for your quick response. Very much appreciated.

• DeskJet 1512: Deskjet1512 HP A5 paper size

  I bought today an all-in-one printer HP Deskjet 1512. This model being chosen on the 1510 as 1512 Spec claims that it prints paper A5 size, yet A5 is not in the list of size of paper under Printer setup / advanced options.

  Does or does not print A5 as advertised?

  talked with HP this morning and now loaded drivers for the 3520 that solved the problem.

• HP Deskjet 1512: Cannot print from Microsoft word 2007

  Hello

  I recently bought a HP Deskjet 1512, it scans and copies without any problems, I am able to print images and files of e-mail, but it won't let me print anything from Microsoft Word (2007), I rebooted and reinstalled the software, I ran the hp doctor and nothing works I still can't print There is no error message and it is not in the print queue, it simply nothing if I click the quick print or preview before printing in word.

  Thanks for any help

  Jessy

  Thanks for the help dragon fur.

  Your answer does not solve the problem, but he did something worse either.

  I have it fixed now though it was a security issue blocking MicrosoftOffice to link to all connected devices.

• USB not connect not not on Win8.1 for DeskJet 1512

  I have a new laptop with Windows 8.1 and I bought a new HP DeskJet 1512.  I try to install the printer and the USB does not yet recognize the connection.  This is related to a printer of 15' cable.

  I tried on a Windows 7 machine and USB has been recognized as unknown.  I installed the HP driver and had something to print this machine.  A lot of hassle, but at least now I know the cable doesn't work and the driver.

  I return to the machine of 8.1 and still nothing.  There is no error in device drivers.  I manually installed the printer on LPT1 and the laptop says the drivers are there, but I'm not connected to the physical printer.

  I spent to Microsoft and makes the difficulty they have for the USB turns off not.  I can't identify what USB printer is connected to given that the cable connection is not even be recognized.

  I changed the USB Sockets and my mouse works in each of them but the printer cable is not recognized in any of them.  I am ready to return the printer if I can't even get connected.  Help please

  None of the fixes work.  I asked about the length of the cable.  I finally found something in the window stuff 8 of which 3 m is the longest to be used.  Wal-Mart has packed a 15 feet with the printer.  I'll get another cable that is less than 9 ' and try again.  I'll put something on this thread on the question of whether it works or not.  Thank you for responding.