Replace the color dialog bug?

The dialog box redefine does not replace the color of objects filled or rubbed with pure black, CMYK or RGB. (Yes, the Recolorier Art selected checkbox). The dialog box replace any other color but not black. Not even a manually created intense black. Manually by selecting another color in the color or Swatches Panel changes it from bottom or edge of the object.

This happens both CS6 and CS5 on Windows 7 x 64. I reported it as a bug on the site in version beta, but I wonder if anyone has any info on this. Also do not know if bug reports are always read for the final version.

Tags: Illustrator

Similar Questions

  • HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

    HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

    I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

  • A jpg still print with white lines spaced, but I replaced the color cart.

    A jpg still print with white lines spaced, but I replaced the color cart. Please notify. Thanks in advance.

    Hello

    That's what I feared. This kind of banding appears in images when using normal paper for use with low quality settings. You can try to increase the quality of the prints or try using photo paper.

    A good document to make booklets with photos is the HP brochure and flyer. (C6818A)

  • Replace the color of the black icon

    Hello

    I am a photoshop newbster and I'm faced with a pretty easy problem: I would like to replace the icon below color with another color (say green).

    I tried both methods I found on the web:

    1. Replace Color tool-> does not work with black

    2. use the magic wand to make a selection, then the paint bucket to fill the new color. Yes, it looked like a 2-year-old called on the phone.

    Can you provide me with a few steps to replace the color on this icon, so it looks decent?

    Thank you!

    Phone.png

    You have luck with this image, because it's on a transparent background. At the top of the layers palette (next to the word Lock) click the grid icon. This locks the transparency. Then just choose your color and paint on the entire Web. Only the pixels that already had the color will pick up the new color, and they will retain the same level of transparency they had in the dark.

  • HPoffice jet pro 6830: replace the color of ink

    Do I have to replace all the cartridges.  How can I kno whwich color came out, if I don't want to replace all the cartridges?

    You can determine which cartridge needs to be replaced by checking ink levels estimated from the printer control panel. To do this, start at the home screen and press the Ink Information - this icon should look like a drop of ink.

    Here is a step by step guide on how to replace the ink for this model: LINK

  • HP 3050 printer prints not clearly even after replacing the color and black cartridges...

    I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

    I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

    Thanks for the tips,

    plarr

    document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

  • Printing printer Lexmark 2600 problems - it prints half a line after replacing the color cartridge

    It prints half a line, if the top or the bottom of it and the cutting of the other party.  This happens on every third line.

    This started happening when I replaced a color cartridge and ran the alignment page.  Before replacing the cartridge, it prints very well (except that the color cartridge started missing).   When I noticed what was going on, I took both cartridges on and then put them back in and had to print the alignment again page.  Yet the problem persists.
    I checked the Device Manager, and my drivers are up to date.  I also checked all connections.
    Any suggestions are welcome.

    Oh boy.  I don't know what I thought.  It just had to unplugging everything & then reconnect them, turn off & on.  This took care of it - seems so simple now.

    I guess it was my new laptop which has the printer all confused.  Win7, my find of CL.

    Insofar as the Lexmark support, I have not yet that day.  In any case, it comes to X 2690 model I had for centuries, so I guess that support would be of any help.  I mean, the guarantee missed a long time ago.
    Thank you for taking the time to answer.
  • Replace the color of Rusty object

    Hello

    I have a rusty object I need green replaced with red, but without interfering or color.

    I found the color replace did a pretty bad job, creating a solid color layer and masking work, but he "painted" on the rust, the Replace Color tool is pretty good, but there is no way to adjust the color. I used a dark red-brown and it seems enough rose (see attachment).

    It would be ideal if I could exit the replacement as an adjustment layer brush, not sure it's possible...?

    Rusty.jpg

    Replace-colour.jpg

    Colouor-overlay.jpg

    If anyone has any tips or advice it would be greatly appreciated.

    See you soon.

    Create green color with the Magic Wand selection, click Hue/Saturation in the Panel settings then check the colorize and play with hue, Saturation, and brightness sliders. You can change the mask later using the Brush tool, for example. In this way, you will have non-destructive adjustment layer and mask layer you can change at any time. You can use and other adjustments like curves but according to me, is easier with the Hue/Saturation, if you want to visually work without matching the exact values.

    On the screenshot below, I've done exactly in front of the thing by mistake, but the principle remains the same.

  • How to replace the color of a schema (cs5)

    Work on a raster of the logo image. I want to change to more moderate yellow bright yellow lines.

    new logo.jpg

    I tried to Image > adjustments > replace color.  But it doesn't seem to be the right tool. Do you know the right tool?

    The selection of the color seems too nit picky for the small fine lines. Or is that what you HAVE to do, selection at real close up.

    Feels like you should be able to say, see this yellow? Replace it with this color: #ccd84b.

    Thank you for advice or suggestions,

    Julie

    http://www.color-hex.com/color/ccd84b is where I found a lot of info but not the hue, saturation, numbers of light Photoshop wanted when I did

    Given that this logo is very simple, I think you could best chance ave to isolate the color that you want to edit and add a new fill layer of solid color with a mask of the color you want and remove completely the old color on the other layer. for example:

    Make a copy of the green channel and use level to make the black bg and the color you want to replace white - don't worry about the text.

    Then add a new layer of solid color fill the same color as the background color. Add a mask to display all the text.

    Add another layer of solid color fill, then use your new color. CTRL-click on the channel that has isolated the ground and invert selection ctrl-shift-i. Then fill the new black solid color adjustment layer mask. You will then need to hide the type. The advantage of this way, it is that you do not have questions to try to match the color in the pixels of the anti-alias, which rarely works well.

  • replace the color documents tool or shortcut?

    Hello

    From time to time when I'm exhausted by looking at the screen (I'm an electrical engineering PhD student), I like to switch to high contrast color schemes. But now the to do, I have to through editing, preferences, availability and then click on replace document colors. Is there not an easier way to do this, as a keyboard shortcut key, or if I can't add a tool that does it for the toolsets?

    Thank you very much.

    Hi Berker,

    In my view, there is no this keyboard shortcut to perform this task immediately.

    However, you can directly open preferences by pressing Ctrl + K (or command-k if you are on mac) and then access the accessibility settings quickly.

    Kind regards
    Rahul

  • Replace the color surrounding the fine detail in the whole picture

    Hello. I've seen some tutorials on how to do something similar - and usually with hair - but if most of the images was the hair and you want to replace the background color, how would you do it? It makes the most sense to isolate the background color and replace it - but I was not able to do.

    Now that I see the art, I think you can get the result you are after, using the mixture if control in the Layer Styles.

    Place the color that you want to appear instead of black on a layer below your art

    Double-click on the top layer to reveal the styes layer and an adjustment of the upper guide similar to that shown. It will give you complete control of the amount of the tip of the shadow of the scale you want to replace. If you are not familiar with putting a layer below the current one or using mixture, including the splitting of the slide, let us know.

  • Cannot replace the colors in the document (background and text)

    I have many documents to read, but the glaring white background of PDF files really hurts my eyes and I end up getting migraines.

    I changed the colors 'document' [Edit > Preferences > accessibility > Document Color Options > replace Document colors > custom color: Page Background gray =;] Text = Black]

    Adobe Reader.JPG

    I have the "Replace Document colors" checked, and I chose Custom colors (gray, black background text).  However, this does not change the background color and text of most PDF files.  Even if everything is checked, when I press OK, the document remains black on white text.

    Help, please...  Thank you!

    However, this does not change the background color and text of most PDF files

    This does not change the color of scanned documents.

  • Replace the color via color chart

    Hello

    I just need to find objects, texts or anything like that on the page have value of shades of color C = 0 M = 0 Y = 0 K = 100 in "black".

    Below is the code I tried, is not find color 'Black' in the list of swatch.


    var doc = app.activeDocument;  
    var item = doc.pageItems;  
    var col = doc.swatches.getByName('Black');      
    for(var i=0; i<item.length; i++){  
             if(item[i].fillColor.spot.color.cyan == 0 && item[i].fillColor.spot.color.magenta == 0 && item[i].fillColor.spot.color.yellow == 0 && item[i].fillColor.spot.color.black == 100){  
                    item[i].fillColor.spot.color == col;}     }
    



    Not sure why it does not apply. He is doing well if the color is in process mode.

    if(item[i].fillColor.cyan == 0 && item[i].fillColor.magenta == 0 && item[i].fillColor.yellow == 0 && item[i].fillColor.black == 100){  
                 item[i].fillColor == col;}  
    

    Thank you

    Kitty

    Hello Kitty,

    Oh, my mistake, I think it happens because run you code when the strokeColor of the element is not a SpotColor, try to check it before, by using an 'If' structure like this:

    for(var i=0; i
    

    Maybe it's work!

    Kind regards

    Vinicius-

  • Replace the color dynamically.

    Hello everyone.

    I have a square in which I have the gray color square.

    I want to replace this gray color with orange color dynamically.

    can someone tell me how to proceed?

    DisplayObject has a transform property, which you can use:

    var t:Transform = yoursquare.transform;

    var ct:ColorTransform = t.colorTransform;

    CT. Color = 0xffa500;

    yoursquare.transform.colorTransform = ct;

  • RID patterns on bottom, replace the color?

    Hello. Using PS CS4 on XP.

    I have a background with a pattern on it (Brown flowery lines dark). I wanted to know if it is a good way to get rid of him. I've heard that I should use replace color. I tried this possibility, but a part of the pattern is still low. I was wondering if there is another option or combination of options I should be doing. Do I need to track down all the way with the tool pen of the boss?

    I will attach a picture before I made any changes.bg-pattern.jpg

    By the way, is Adobe Forums REAL slow for anyone? Everytime I go here, it takes at least 5 minutes to load.

    Thanks for any help.

    Would have been easier to understand if you said that you want to get rid of the brown lines flowery and build the entire image a rough tan.

    Try to use the patch tool. Start with a very small section on the lower left side and as you go along will be able to take larger pieces.

Maybe you are looking for

  • Upgrade to Windows 10 and need historical data

    After an update Windows 10 and Thunderbird as my email client, I seem to have lost my contacts and previous emails, files, etc..

  • amalgamated contacts on two independent devices

    I do everything in my power, blow rant and rage.  For two and 1/2 years without exaggeration, I did not know how and why my contacts and my independent/no-bound son of separate phones became mixed.  In all honesty, it started when I gave my son a new

  • Why do I continually get updates for 10.11.3

    It costs me about a Go, whenever I update, and it shows already updated in the last 30 days, but is one showing version 10.11.2 on my presentation will have lots of problems with the captain el OS X y at - it solution

  • HP 550-152na: could not find the driver

    Hello - after having to clean install windows because of the mistake of starting I have lost the driver for my graphics card and cannot find it on the web for download. This is the AMD RADEON R5 330. I tried the M330 and one suggested by AMD detect s

  • AC5300 and AC1200

    The AC5300 and the AC1200 will work together? I'm looking to remove my switch... Thank you